| 00:00.03 | BabelO | cr2: ok, so i just load 10 rus files, i do an export now |
| 00:00.42 | BabelO | cr2: so i need to start qgis :) |
| 00:01.39 | cr2 | don't forget to change the type to 'Garmin' before saving. |
| 00:02.01 | BabelO | ah :( i restart , where is this type in mapedit ? |
| 00:03.02 | cr2 | File->Map Properties |
| 00:04.30 | BabelO | cr2: i miss PyQt, , is it very usefull ? |
| 00:05.41 | cr2 | no. |
| 00:05.58 | cr2 | it's good for mapserver output, and some fast hacking. |
| 00:06.03 | BabelO | ok, typeset is already set to garmin |
| 00:06.20 | cr2 | i compile qgis without python support. |
| 00:06.22 | cr2 | ok. |
| 00:07.17 | BabelO | cr2: i use opensuse 10.3 prebuilt |
| 00:08.01 | BabelO | cr2: so now, in qgis ? |
| 00:08.32 | BabelO | cr2: it seem that qgis had vector .mif import |
| 00:09.49 | cr2 | BabelO: you need to convert .mp into shapefiles |
| 00:10.04 | BabelO | cr2: ok, how ? |
| 00:10.26 | cr2 | we don't have a free complete .mp parser as free software yet. |
| 00:10.31 | cr2 | use cgpsmapper |
| 00:10.39 | cr2 | cgpsmapper shp file.mp |
| 00:11.29 | cr2 | http://cgpsmapper.com/download/cgpsmapper-static.gz |
| 00:15.21 | BabelO | cr2: Error E025: Zoom definition for layers must be ascending |
| 00:17.26 | cr2 | edit the .mp file |
| 00:17.36 | cr2 | pastebin the header. |
| 00:20.28 | BabelO | cr2: http://pastebin.ca/905754 |
| 00:20.56 | cr2 | Zoom6=5 |
| 00:20.56 | cr2 | Zoom7=5 |
| 00:20.56 | cr2 | Zoom8=6 |
| 00:21.06 | cr2 | change 5 5 6 to 5 6 7 |
| 00:21.32 | BabelO | cr2: yes, i see, that is strange ? no |
| 00:21.39 | cr2 | cgpsmapper does not like two equal zoom levels. |
| 00:21.52 | cr2 | the .rus internals are not known. |
| 00:22.00 | BabelO | ok done |
| 00:22.05 | cr2 | hacking this format is useless. |
| 00:22.14 | BabelO | converting now |
| 00:22.18 | cr2 | ok. |
| 00:22.28 | cr2 | you'll get 4 shapefiles (.shp) |
| 00:22.35 | BabelO | Warning W014: RGNLIMIT should not be lower than 500. |
| 00:22.40 | cr2 | warning. |
| 00:22.53 | cr2 | does not matter. |
| 00:23.06 | BabelO | still running :) |
| 00:23.28 | dcordes | cr2: did an inquiry about sd on msm ML |
| 00:23.38 | cr2 | dcordes: ok. |
| 00:23.52 | dcordes | http://groups.google.com/group/linux-msm-kernel/ |
| 00:24.02 | cr2 | BabelO: big, non-simplified map. |
| 00:24.25 | dcordes | cr2: obviously there is somebody who also wants topoly displays to work |
| 00:24.39 | BabelO | cr2: yes, mp file is 160 Mb ... ok it just finish |
| 00:24.42 | cr2 | dcordes: titan people :) |
| 00:24.46 | dcordes | cr2: shall I refer to kaiser mddi in xda wiki? |
| 00:24.50 | dcordes | somebody of us? |
| 00:25.03 | ImCoKeMaN | whats wrong with titan people? |
| 00:25.05 | BabelO | cr2: 77 s to process 10 .rus files |
| 00:25.11 | dcordes | ImCoKeMaN: elo |
| 00:25.24 | ImCoKeMaN | hey |
| 00:25.27 | cr2 | BabelO: it's cut in too many pieces |
| 00:25.36 | ImCoKeMaN | i'm currently dumping radio ram cuz i can |
| 00:25.54 | dcordes | ImCoKeMaN: what's wrong with them? they have no kaiser |
| 00:25.55 | cr2 | ImCoKeMaN: no, just a complex mddi panel. |
| 00:26.07 | cr2 | ImCoKeMaN: lol |
| 00:26.24 | ImCoKeMaN | leaked rom came with MFG bootloader so i'm getting the SMI and EBI |
| 00:26.57 | ImCoKeMaN | apparently you can recreate radio roms with that...not sure i'd want to flash them, but figured i'd play around with my new options |
| 00:27.01 | BabelO | cr2: i got lot of file .dbf .shp .shx and .txt with various prefix have marine_line marine_point marine_polygon and also poi point polygon line |
| 00:27.15 | dcordes | ImCoKeMaN: mfg? |
| 00:27.19 | ImCoKeMaN | yup |
| 00:27.23 | dcordes | omfg bootloader |
| 00:27.28 | dcordes | got a link? |
| 00:27.29 | ImCoKeMaN | manufacturer bootloader comes with rtask stuff |
| 00:27.40 | dcordes | rtask? |
| 00:27.51 | ImCoKeMaN | for just the bl or the whole new rom with gps enabled? |
| 00:28.11 | cr2 | BabelO: marine* is not interesting. |
| 00:28.13 | ImCoKeMaN | rtask is a bootloader command to access the radio's bootlaoder |
| 00:28.23 | BabelO | cr2: ok |
| 00:28.32 | dcordes | I know the msm firmware analyzer. is that what you talking about? |
| 00:28.42 | cr2 | BabelO: the 'shapefile' is a collection of *.shp/*.shx/*.dbf/*.prj with the same name. |
| 00:29.04 | cr2 | BabelO: try 'qgis line.shp' |
| 00:29.14 | ImCoKeMaN | no, there was a leaked carrier rom from sprint that enabled GPS, REV A and had this bootloader |
| 00:29.24 | BabelO | cr2: ok trying |
| 00:29.54 | ImCoKeMaN | does the msm firmware analyzer allow write access to radio portions? |
| 00:30.09 | ImCoKeMaN | i haven't used that at all |
| 00:30.27 | BabelO | cr2: i get a segfault :( trying others |
| 00:30.33 | dcordes | euuurrr no idea. I have a kaiser, not titan |
| 00:30.39 | ImCoKeMaN | hrm |
| 00:31.06 | ImCoKeMaN | but that has an msm also |
| 00:31.11 | dcordes | ya |
| 00:31.11 | cr2 | BabelO: which qgis are you using ? |
| 00:31.35 | dcordes | let's just all get the andr0id phone lol |
| 00:31.51 | BabelO | cr2: 0.9.2 |
| 00:31.52 | ImCoKeMaN | or make these android phones instead |
| 00:32.03 | ImCoKeMaN | buying one would take the fun out of it |
| 00:32.04 | cr2 | BabelO: procompiled for suse ? |
| 00:32.12 | cr2 | s/pro/pre/ |
| 00:32.17 | BabelO | cr2: yes |
| 00:32.22 | dcordes | ImCoKeMaN: I'm not going to fire up any android userland here! |
| 00:32.25 | cr2 | BabelO: gdb ? |
| 00:32.45 | dcordes | even if there was a full kernel port. x11 and gtk ftw! |
| 00:32.53 | ImCoKeMaN | heh |
| 00:35.03 | BabelO | cr2: segfault seem to be in libgdal |
| 00:35.25 | BabelO | cr2: OGRLineString::exportToWkb () |
| 00:36.23 | cr2 | BabelO: strange. |
| 00:36.36 | cr2 | i compiled qgis myself |
| 00:37.43 | BabelO | cr2: i try again with a smaller file |
| 00:40.04 | BabelO | cr2: what are diff between libgdal and libgdal-grass ? |
| 00:40.26 | BabelO | cr2: i ve version 1.5.0 of libgdal |
| 00:42.26 | cr2 | libgdal-grass is an addon for dealing with grass vectors and rasters. |
| 00:42.32 | cr2 | i use 1.5.0 too |
| 00:48.20 | cr2 | BabelO: what about poi.shp ? polygon.shp ? |
| 00:48.29 | BabelO | cr2: same |
| 00:50.50 | cr2 | compile it yourself :) |
| 00:50.55 | cr2 | but it's a bit pita |
| 00:51.24 | cr2 | because you need to start with proj4, then compile geos, then gdal, and only then qgis. |
| 00:51.57 | BabelO | cr2: i ve already proj4 , gdal, just need to look what is geos |
| 00:52.38 | BabelO | cr2: before segfault Warning: QPainter::begin: Cannot paint on a null pixmap |
| 00:52.49 | cr2 | http://geos.refractions.net |
| 00:52.55 | cr2 | thet the 2.2.3 version |
| 00:53.28 | cr2 | BabelO: i get such warnings too. |
| 01:22.28 | *** join/#htc-linux LunohoD_ (n=alex@e180066112.adsl.alicedsl.de) |
| 01:46.32 | *** join/#htc-linux BabelO (n=Fabrice@unaffiliated/babelo) |
| 01:47.53 | *** join/#htc-linux BabelO (n=Fabrice@unaffiliated/babelo) |
| 02:05.26 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 02:06.52 | ImCoKeMaN | looks like a BabelO bad net loop |
| 02:07.16 | ImCoKeMaN | so 160 megs of radio info dump zips up to 5mb |
| 02:14.22 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 02:20.52 | cr2 | kiozen: src/IMapToolWidget.ui is missing |
| 03:08.28 | parmaster | cool, looks lik babel0 has a patch for irda on the ba |
| 03:10.01 | parmaster | i have a irda foldable keyboard . |
| 04:34.27 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 04:38.58 | *** join/#htc-linux joschkop179 (n=joschi@f049049251.adsl.alicedsl.de) |
| 04:52.13 | *** join/#htc-linux TimRiker (n=timr@rikers.org) |
| 05:03.16 | *** join/#htc-linux joschkopf79 (n=joschi@f049049251.adsl.alicedsl.de) |
| 06:43.42 | *** join/#htc-linux CoW_ (i=cow@72.20.3.50) |
| 09:08.51 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbffc4d.pool.einsundeins.de) |
| 09:42.22 | *** join/#htc-linux Marex (n=marex@gwfm10-3-250.802.cz) |
| 09:44.30 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 10:46.08 | *** join/#htc-linux goxboxlive (n=goxboxli@134.84-48-212.nextgentel.com) |
| 11:07.29 | *** join/#htc-linux pH5 (n=ph5@p5485EECD.dip.t-dialin.net) |
| 11:12.47 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 11:18.09 | *** join/#htc-linux diogene31 (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
| 11:26.58 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 11:27.15 | *** join/#htc-linux hlbot (n=adm@iclem.net) |
| 11:27.49 | *** join/#htc-linux dje (n=dje@i02m-212-194-211-94.d4.club-internet.fr) |
| 11:36.09 | *** join/#htc-linux Pryan (n=pryan@84.125.94.110.dyn.user.ono.com) |
| 11:43.19 | *** join/#htc-linux tsdogs (n=tsdogs@net-84-18-144-39.c.bkom.it) |
| 11:49.56 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 12:06.11 | *** join/#htc-linux snakefreak (n=dennisco@dyndsl-091-096-095-048.ewe-ip-backbone.de) |
| 12:06.26 | snakefreak | hi all |
| 12:06.54 | snakefreak | anyone cane tell me how to enable bluetooth on ba? |
| 12:07.49 | snakefreak | gpe bt pannel aplett says interupt system call when i tap switch on device |
| 12:07.49 | snakefreak | and hcitool dev shows me no device. |
| 12:08.31 | snakefreak | i typed dmesg but on alge image is a probblem with an irq and dmesg only shows these error^^ |
| 12:13.16 | tsdogs | snakefreak: maybe u need to modprobe some module |
| 12:14.21 | snakefreak | hm ok i must search for the name^^ |
| 12:17.31 | snakefreak | modules\2.6.21-hh20\kernel\net\bluetooth |
| 12:17.37 | snakefreak | i had many. |
| 12:18.36 | tsdogs | isn't there a htcblueangel ? |
| 12:18.59 | snakefreak | l2cap.so sco.ko bluetooth.ko <(i think this) |
| 12:19.27 | snakefreak | its a ba with alge image |
| 12:19.51 | tsdogs | snakefreak: I have no idea, I haven't got a BA. BabelO would know |
| 12:20.54 | snakefreak | hm ok |
| 12:22.13 | BabelO | snakefreak: hciattach /dev/ttyS3 any |
| 12:22.16 | snakefreak | how can i list inserted moduls. |
| 12:22.31 | snakefreak | ok |
| 12:23.47 | snakefreak | works |
| 12:23.54 | snakefreak | many thanks!!! |
| 12:44.20 | *** join/#htc-linux hlbot (n=adm@iclem.net) |
| 12:53.20 | *** join/#htc-linux hlbot576 (n=adm@iclem.net) |
| 13:06.46 | *** join/#htc-linux hlbot (n=adm@iclem.net) |
| 13:12.12 | *** join/#htc-linux kiozen (n=kiozen@M8ef6.m.pppool.de) |
| 13:12.29 | kiozen | hi all |
| 13:12.31 | kiozen | cr2: svn up |
| 13:31.33 | *** join/#htc-linux hlbot (n=adm@iclem.net) |
| 13:38.39 | BabelO | ola kiozen |
| 13:38.48 | kiozen | ola :) |
| 13:43.37 | goxboxlive | hi |
| 13:45.50 | tsdogs | goxboxlive: I have updated qtermina, needs testing :) |
| 13:48.22 | *** join/#htc-linux Kevin2 (n=Kevin@207-237-52-122.c3-0.avec-ubr12.nyr-avec.ny.cable.rcn.com) |
| 13:50.49 | tsdogs | to anybody who can help me out :) |
| 13:50.52 | tsdogs | http://84.18.144.44/tsdogs/qtopia/voice_control.pdf |
| 13:50.59 | tsdogs | http://84.18.144.44/tsdogs/qtopia/qvoicecontrol.tar.bz2 |
| 13:51.09 | tsdogs | first one is a doc I found on the net |
| 13:51.43 | tsdogs | second one is experimental code, which I can't make it work as expected :( |
| 13:52.05 | tsdogs | Parts of the code are taken from cvoicecontrol and kvoicecontrol ... |
| 13:56.06 | *** join/#htc-linux pH5 (n=ph5@p5485EECD.dip.t-dialin.net) |
| 13:56.47 | BabelO | tsdogs: very intersting doc |
| 13:57.16 | tsdogs | :) yes but I think that only cr2 would understand all those formulas |
| 13:58.20 | tsdogs | I somehow understood looking at the code how all this works, but I have no idea on where the code is wrong. |
| 13:58.51 | tsdogs | Probably the "normalization" of the signal has something strange, I get too colse values for different words :( |
| 14:08.04 | tsdogs | well I guess cr2 could help me out, he just went to the Fourier conference or something :) |
| 14:26.34 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbffc4d.pool.einsundeins.de) |
| 14:33.47 | *** join/#htc-linux pH5 (n=ph5@p5485EECD.dip.t-dialin.net) |
| 14:42.11 | BabelO | cr2: perfect :) i just build my own qgis with all support and it is ok, i can load shp files now |
| 14:45.41 | BabelO | cr2: so now i m ok for next lesson , currently reading some qgis documentation |
| 14:52.07 | *** join/#htc-linux psokolovsky (n=psokolov@88.231.76.37) |
| 16:36.29 | *** join/#htc-linux laptor (n=laptor@212.118.100.95) |
| 16:36.43 | *** part/#htc-linux laptor (n=laptor@212.118.100.95) |
| 16:51.41 | cr2 | hi |
| 16:53.20 | cr2 | BabelO: no you need my script, and the 'buildmap' and 'buildus' binaries |
| 17:22.05 | *** join/#htc-linux mattepiu (n=default@host151-122-dynamic.3-87-r.retail.telecomitalia.it) |
| 17:23.12 | mattepiu | Hi all! Where should I start to create a toolchain fot htc magician opieII or openmoko image? Or in alternative somebody can give me an fbreader binary for current images? |
| 17:28.57 | BabelO | hi cr2 |
| 17:29.14 | BabelO | cr2: ok, i m trying toi setup postgreSQL / PostGIS .... |
| 17:29.24 | cr2 | BabelO: you don't need to. |
| 17:29.43 | BabelO | ok |
| 17:29.56 | cr2 | got the script ? |
| 17:30.58 | cr2 | BabelO: root 1641 2.0 68.6 2390556 1415536 tty7 Ss+ Feb01 471:59 /usr/bin/Xorg -br -nolisten tcp :0 vt7 |
| 17:31.35 | BabelO | cr2: no i did not get the script |
| 17:33.09 | BabelO | cr2 : what is that ? |
| 17:33.39 | cr2 | my notebook is a bit slow |
| 17:34.47 | BabelO | cr2 Xorg usage ? mine is often very high with bad nvidia driver |
| 17:35.55 | cr2 | konqueror did something strange. |
| 17:36.02 | cr2 | BabelO: get import-shp.sh |
| 17:38.34 | mattepiu | Which toolchain is used for the armstrong distro? Are there some kernel configuration files? |
| 17:38.53 | BabelO | cr2: where do you send it ? gmail ? |
| 17:39.09 | cr2 | BabelO: no, the usual http dir |
| 17:39.11 | BabelO | mattepiu: toolchain is the one build in OE |
| 17:39.16 | cr2 | mattepiu: OE ? |
| 17:39.16 | BabelO | cr2: ok |
| 17:40.30 | BabelO | cr2: ok i get it |
| 17:40.38 | mattepiu | ehm... OE stands for? I come from desktop linux or automotive apps (custom toolchains+) |
| 17:41.24 | mattepiu | oh, OpenEmbedded, ty all |
| 17:41.32 | BabelO | mattepiu: -> http://www.openembedded.org/ |
| 17:53.41 | *** join/#htc-linux who_ (i=who@194.145.250.184) |
| 17:55.49 | *** join/#htc-linux tre9 (i=80c3ba2b@gateway/web/ajax/mibbit.com/x-3740a82b55c0740d) |
| 18:00.37 | tre9 | I'm trying to use ppp over gprs on blueangel. and get this error from pppd: |
| 18:00.48 | tre9 | rcvd [LCP ConfReq id=0xf0 <asyncmap 0x0> <auth chap MD5> <pcomp> <accomp>] |
| 18:01.08 | tre9 | No auth is possible |
| 18:01.17 | *** join/#htc-linux SmallR2002 (n=SmallR20@79-74-124-91.dynamic.dsl.as9105.com) |
| 18:01.47 | tre9 | does this mean the GPRS is connected but pppd can't negotiate auth? |
| 18:02.19 | cr2 | tre9: i think yes. auth and ppp config depend on the provider |
| 18:03.40 | tre9 | thanks. any ideas what to look for? I'm not good with pppd details. |
| 18:04.55 | cr2 | i've never used gprs |
| 18:05.28 | BabelO | tre9: in general is it related to lcp setup, did you look at handhelds.org howto ? |
| 18:09.32 | tre9 | I see this: http://www.handhelds.org/moin/moin.cgi/PPPhowto but it seems like it's for connecting to a local machine. |
| 18:11.19 | *** join/#htc-linux TimRiker (n=timr@rikers.org) |
| 18:11.30 | BabelO | tre9: http://www.handhelds.org/moin/moin.cgi/GPRS |
| 18:17.26 | tre9 | thanks, I'll experiment with some of this. |
| 18:20.04 | tre9 | I guess the "rcvd" message above means that my provider wants either chap or MD5 auth. I don't know what that means. I don't need a username for my provider. |
| 18:31.23 | tre9 | I ran a chat script on ttyS0 and now I can't access it with gomunicator. I guess the device is busy. Is there a way to unlock it? |
| 18:31.47 | BabelO | tre9: kill chat process |
| 18:33.13 | tre9 | it isn't running. It just sent "atd..." and finishes. Do I need to send "+++" or something to get back to command mode? |
| 19:24.45 | cr2 | BabelO: does the script work for you ? |
| 19:29.56 | BabelO | cr2: no |
| 19:30.20 | BabelO | cr2: i ve a little issue with my computer clock which cause some trouble while trying to compile tools |
| 19:37.34 | *** join/#htc-linux tre9 (i=80c3ba2c@gateway/web/ajax/mibbit.com/x-cd14924e157470bd) |
| 19:52.04 | *** join/#htc-linux tre9 (i=80c3ba69@gateway/web/ajax/mibbit.com/x-34d0d037e1fb1c73) |
| 19:54.53 | *** join/#htc-linux aLeSD (n=alex@162.Red-83-33-46.dynamicIP.rima-tde.net) |
| 19:57.37 | tre9 | fix for starting gomunicator after sending ATD to ttyS0: killall gsmd; killall settihtc; modprobe -r n_tihtc; modprobe n_tihtc; settihtc /dev/ttyS0 atcmd -k |
| 20:14.56 | BabelO | cr2: i m not able to build roadmap tools :( |
| 20:15.48 | psokolovsky | Hi! |
| 20:16.00 | psokolovsky | goddamn, I bricked my hx4700, lol |
| 20:16.26 | psokolovsky | cr2: happen to know how "user flash" is organized on hx4700? |
| 20:16.37 | BabelO | hi psokolovsky |
| 20:16.48 | psokolovsky | pH5: ^^^ ? |
| 20:20.49 | *** join/#htc-linux CoKeSERO (n=me@pool-72-95-38-115.hrbgpa.fios.verizon.net) |
| 20:21.09 | pH5 | psokolovsky: no, but you're welcome to find out so I can add the partition list to the htc-flash tool. |
| 20:21.22 | pH5 | the only thing I cared about so far was the bootloader. |
| 20:22.25 | psokolovsky | pH5: any docs on that matter? |
| 20:22.44 | pH5 | I think it strongly depends on whether you have wm2005 or wm2003 in flash. maybe the dual-boot guys on hx4700-port know more. |
| 20:23.40 | pH5 | psokolovsky: sadly no. |
| 20:24.26 | pH5 | psokolovsky: how did this happen? |
| 20:25.17 | psokolovsky | pH5: I want to try booting off jffs2 using haret. So, I just pit something to "home" mtd partition as the first step, and wince now doesn't boot ;-E |
| 20:25.35 | psokolovsky | pH5: any idea at least what kind of flash fs is used on hx? (wm2003) |
| 20:26.44 | pH5 | hehe. the mtd partitions on linux are chosen arbitrary as you had to learn. |
| 20:27.01 | pH5 | the storage I don't know, it is some kind of microsoft-proprietary flash thing, but it changed after wm2003 |
| 20:27.16 | pH5 | the 'extrom' (the part that autoinstalls during boot) just a plain fat fs though. |
| 20:29.12 | psokolovsky | pH5: so, any chance that I might find an area in rom to which I can write arbitrarily or is it all vain? |
| 20:29.42 | pH5 | psokolovsky: it is no problem to overwrite the extrom part, I did that on magician. |
| 20:29.59 | pH5 | maybe searching for a FAT signature in a complete rom dump will help here. |
| 20:30.28 | psokolovsky | pH5: ok, thanks for hints |
| 20:31.39 | pH5 | psokolovsky: I'd be very interested to learn what you find out |
| 20:31.45 | pH5 | (it just wasn't important enough to start digging myself instead of doing other interesting things...) |
| 20:32.34 | psokolovsky | pH5: well, all that "extrom" stuff - it's not present literally in ROM, is it? |
| 20:33.40 | CoKeSERO | what device? |
| 20:33.44 | pH5 | psokolovsky: you mean whether the string "extrom" appears? I don't think so. |
| 20:33.56 | psokolovsky | pH5: ok |
| 20:34.16 | pH5 | but the fat signature, look for MSWIN4.1 three bytes into the block for example |
| 20:34.43 | pH5 | CoKeSERO: hx4700 |
| 20:34.53 | pH5 | (htc roadster :)) |
| 20:36.21 | CoKeSERO | ooh haven't heard too much about those yet |
| 20:36.37 | cr2 | psokolovsky, pH5: how big is the pxa flash on hx4700 ? |
| 20:36.43 | CoKeSERO | i know some new devices don't have extrom though, my titan has one, but the vogue doesn't |
| 20:36.57 | psokolovsky | cr2: hx uses standalone nor, 128mb |
| 20:37.43 | cr2 | ok, so it's only partitioned between the bl,wince and extrom |
| 20:37.59 | cr2 | extrom is usually the fatfs |
| 20:38.01 | cr2 | but |
| 20:38.17 | cr2 | it had some header in earlier times |
| 20:38.32 | cr2 | so it was necessary to mount it with an offset. |
| 20:38.39 | cr2 | i'll look into wiki. |
| 20:39.22 | psokolovsky | cr2: if you can, because my googling didn't lead to anything |
| 20:40.39 | cr2 | psokolovsky: read that first http://wiki.xda-developers.com/index.php?pagename=HimalayaFileFormats |
| 20:40.51 | psokolovsky | cr2: also, bit more trivia: in h4000 DoC, there're also areas which look like fatfs per headers. But it's not really valid fat, cannot be mounted for example. |
| 20:41.13 | CoKeSERO | what is the fat does it say something like tfat12? |
| 20:41.31 | cr2 | afair the offset value may be different from that one: |
| 20:41.34 | cr2 | mount -r -o loop,offset=0x70040 -t vfat ms_.nbf /mnt/loop0 |
| 20:48.28 | *** join/#htc-linux SmallR2002 (n=SmallR20@79-66-107-13.dynamic.dsl.as9105.com) |
| 20:48.31 | CoKeSERO | oh cr2, i got the titan in download mode and did some more dumps it has smi and ebi bin files not sure if that will have much more info than already available, but thought i'd mention cuz i know the ram dump i did was interesting |
| 20:48.39 | psokolovsky | cr2: well, there doesn't appear to be anything like fatfs in image from SP29841.exe |
| 20:49.14 | cr2 | psokolovsky: do you have a link for SP29841.exe ? |
| 20:49.42 | psokolovsky | cr2: see http://linuxtogo.org/~ph5/hx4700/wince/rom-update-1.10 |
| 20:49.58 | cr2 | ok, thanks. |
| 20:52.39 | psokolovsky | cr2: so, at some place, after 0's, just FF's start, interspersed each 256k with a small headers. of course, flash erase blocks. |
| 20:53.17 | psokolovsky | cr2: maybe you can recognize fs from them? ;-)) : F0 F0 F0 F0 | 00 00 00 00 │ 96 F2 E7 10 │ DB D3 00 FC │ 00 00 00 00 │ 59 01 59 01 |
| 20:56.14 | cr2 | no :) |
| 20:57.25 | psokolovsky | cr2: ok, at even starts @0x02800000 |
| 20:58.11 | psokolovsky | at 40th MB |
| 21:01.29 | cr2 | m$ often speaks about 'binfs', i have no idea about it. |
| 21:02.40 | cr2 | btw, is it a wince5 flash dump ? |
| 21:03.13 | psokolovsky | cr2: nope, without a doubt 2003, if it's freely available ;-) |
| 21:04.04 | cr2 | ok. do you know how did they assemble this one http://forum.xda-developers.com/showthread.php?t=325727 |
| 21:05.56 | psokolovsky | nope of course ;-) |
| 21:06.59 | cr2 | hmm. |
| 21:08.00 | psokolovsky | So, apparently bootloader scans that flashfs during boot and hangs if inconsistency is detected ;-( |
| 21:08.21 | psokolovsky | so, no wince + linux in flash ;-) |
| 21:09.44 | cr2 | checksum ? |
| 21:10.08 | cr2 | i'm looking at the n560 resume now, which is very weird. |
| 21:10.43 | cr2 | it looks at some specific locations in flash under certain conditions. |
| 21:21.47 | psokolovsky | pH5: how long rom flash with htc bootloader (off sd) takes? |
| 21:22.00 | pH5 | 10-20min |
| 21:22.18 | psokolovsky | oh my god! ;-D I already reset it twice ;-D |
| 21:22.51 | CoKeSERO | start and walk away |
| 21:24.48 | rakeem___ | You whacky geeks still at it huh? |
| 21:25.12 | rakeem___ | Hi ph5, cr2 etc... ;-) |
| 21:27.59 | cr2 | CoKeSERO: everything msm7x00 is on hold until androids will release the sd driver. |
| 21:28.04 | cr2 | hi rakeem___ |
| 21:28.54 | rakeem___ | Oh yeah, cr2: What's the deal with android? Good, bad? Anything we can play with? |
| 21:29.07 | cr2 | not really |
| 21:29.27 | rakeem___ | 8-( |
| 21:29.44 | CoKeSERO | alright, also wondering if there was more tools to work on nv items etc, i saw bqs firmware analyzer but it locks up on nv items after 0028 and is slow in doing any dumps |
| 21:31.08 | pH5 | hm.. |
| 21:31.14 | pH5 | CoKeSERO: do you happen to know if the firmware analyzer can talk with samsung's f700 by now? |
| 21:31.38 | CoKeSERO | actaully just downloaded it today this was the first i tried it on (titan) |
| 21:33.00 | CoKeSERO | if you can get qc diag mode and drivers i'd think the tool can prob access |
| 21:33.48 | rakeem___ | cr2: Uni question: I've been having trouble with the usbserial; across different kernel versions, whenever I send anything to ttyUSB0, the devnode disappears, as does the hardware listing under lsusb. Could this weirdness maybe down to the radio stack flashed with CE? |
| 21:35.06 | pH5 | heh. I wish every hardware vendor producing binary-only drivers would ship them with DWARF info enabled :) |
| 21:36.22 | cr2 | rakeem___: you send the at@usbpower=1 at ttyS0 and keep it open ? |
| 21:37.16 | rakeem___ | One of the reasons I suspect the GSM ROM is that unless I remove the battery when booting back to CE, I almost always get a dialog saying "GSM radio was crashed, rebooting in 30 secs"... It disappears as described as soon as I send anything, even at@usbpower=1... |
| 21:37.56 | cr2 | rakeem___: looks like some phone hardware problem. |
| 21:38.32 | rakeem___ | It works really nicely under CE... Reckon I should fiddle with the ROM? |
| 21:40.06 | cr2 | ah, it's after you have used it in linux ? |
| 21:40.38 | cr2 | btw, you should check your radio init string. |
| 21:40.57 | cr2 | the string in wiki is from 1.04 |
| 21:41.06 | cr2 | newer versions have more options. |
| 21:41.39 | rakeem___ | I get the crash dialog when going back to CE from Linux... When do I send the init string? Prior to GPR$ dial? |
| 21:42.47 | cr2 | after opening the /dev/ttyS0 |
| 21:43.18 | rakeem___ | Where can I check? |
| 21:43.32 | cr2 | pH5: are there any moko news ? |
| 21:44.51 | rakeem___ | Everything else is rock solid. I found I'd left it on, connected to the charger, for about 24 hours and it was still up, connected to the wifi. |
| 21:51.24 | pH5 | cr2: no idea, the moko guys are busy preparing their gta02 release. the reverse engineering efforts on the hammerhead gps chip grinded to a halt, taking apart compiled C++ code is just too painful for me and I don't have too much knowledge about GPS hardware. |
| 21:52.40 | cr2 | ok. |
| 21:53.31 | cr2 | pH5: i've seen the s3c-pwm driver in the moko patches. i wish we have ported it to pxa. |
| 21:54.17 | rakeem___ | Does c++ code turn to mush when compiled? |
| 21:54.28 | pH5 | cr2: there is a pxa pwm driver (including led), it was sent to LAK last week. |
| 21:54.49 | cr2 | do you have a link ? |
| 21:55.26 | mattepiu | to build openmoko with qvga I know I need to change some imagemagick and librsvg config... but I don't know what to modify.... any good tutor? |
| 21:55.55 | pH5 | mattepiu: are you talking about the missing imagemagick-native and librsvg-native recipes? |
| 21:56.01 | mattepiu | yes |
| 21:56.16 | mattepiu | I have to supply .bb files? |
| 21:56.57 | pH5 | mattepiu: yes. or install them on the host and add ASSUME_PROVIDED += "imagemagick-native librsvg-native" to your local.conf as a workaround |
| 21:57.01 | rakeem___ | Gotta reboot... HDD gone weird... (Like my nick)... |
| 21:57.12 | mattepiu | pH5: thank you |
| 21:59.02 | pH5 | cr2: http://marc.info/?l=linux-arm-kernel&m=120298330609864&w=2 http://marc.info/?l=linux-arm-kernel&m=120298345410090&w=2 http://marc.info/?l=linux-arm-kernel&m=120298345410094&w=2 |
| 22:00.19 | cr2 | pH5: thanks. so there is pxa3xx support in linux-arm ? |
| 22:00.44 | *** join/#htc-linux pH5 (n=ph5@p5485EECD.dip.t-dialin.net) |
| 22:17.41 | cr2 | pH5: i'm wondering why +struct pwm_device { is declared in asm-arm/arch-pxa/pwm.h |
| 22:17.53 | cr2 | as if it's a pxa-only device. |
| 22:20.14 | cr2 | EXPORT_SYMBOL(pwm_config) does not look very clever too. |
| 22:20.37 | cr2 | but it's a good start. |
| 22:35.05 | psokolovsky | pH5: your htc-utils - can they boot a kernel using htc-bootloader? |
| 22:38.05 | psokolovsky | well, apparently htc-boot does just that, but all those tags.raw are weird... |
| 22:38.27 | cr2 | psokolovsky: it uses a hack for boot. |
| 22:38.52 | psokolovsky | well, that's ok, but constructing atag image is boooring ;-) |
| 22:39.00 | cr2 | we didn't manage to to the right ramboot. |
| 22:39.33 | psokolovsky | also I don't really see where it does jump |
| 22:41.12 | psokolovsky | ah, "modifying bootloader command table". indeed, quite a hack |
| 22:41.25 | psokolovsky | cr2: so, does it work? ;-)) |
| 22:41.40 | cr2 | on magician, afaik. |
| 22:42.04 | cr2 | i've sent my ba to pH5 |
| 22:47.56 | mattepiu | hum, anybody already checked if fbreader works in openmoko? |
| 22:48.08 | BabelO | cr2, psokolovskyon ba it hang in boot process |
| 22:48.49 | psokolovsky | checking on hx now... |
| 22:49.15 | cr2 | mattepiu: what is fbreader ? cat /dev/fbX ? |
| 22:49.53 | mattepiu | no, ebooks reader, it reads plucker and .epub formats |
| 22:50.10 | mattepiu | cr2:http://www.fbreader.org/ |
| 22:53.51 | psokolovsky | nope, that hack doesn't work on hx ;-( |
| 22:59.18 | cr2 | mattepiu: ok. |
| 22:59.45 | mattepiu | cr2: ok what? you checked fbreader already? |
| 23:01.03 | cr2 | no, now i know what it is. |
| 23:06.06 | pH5 | psokolovsky: it works on magician and ba so far (unfortunately the ba kernel is not ready yet to boot from the bootloader) |
| 23:06.26 | mattepiu | cr2: oh, ok... after a little inspection it may need some work to make it run on my htc magician, but shouldn't be impossible |
| 23:06.42 | psokolovsky | pH5: well, apparently that ph5test break-in doesn't work for hx ;-) |
| 23:08.13 | pH5 | psokolovsky: if you're interested I can give this some priority, but until now there just was no need to boot hx4700 with that hack. |
| 23:08.20 | psokolovsky | so, it's completely weird: hx4700 can be activated with buttons, but lacks "jump" command, h5000 b/h has jump, but can't be called from kbd ;-\ |
| 23:08.47 | psokolovsky | pH5: nope, no worries, I'm looking for quick on-spot solution ;-) |
| 23:19.26 | pH5 | :) good |