| 00:49.49 | Rom1 | i want to know how Haret find the framebuffer adresse ? he read on the registers on µC ? |
| 00:55.23 | dcordes | damnit how does the android image talk to the modem? |
| 00:58.09 | dcordes | is a kaiser person around? |
| 01:04.29 | ginge | it cats AT commands to /dev/smd0 and uses a shared memory |
| 01:05.26 | dcordes | I echo commands and it doesn't wanna reply |
| 01:05.57 | *** join/#htc-linux bemasc (n=bens@71.232.12.109) |
| 01:06.59 | ginge | which patch set you using? |
| 01:08.01 | marajin | meep? |
| 01:09.06 | bemasc | I have an HTC Apache, and I'd love to switch to Linux. |
| 01:09.19 | ginge | woot! I got the mapping for the phone call and end key working |
| 01:09.20 | bemasc | Unfortunately, the HTCApache page says that charging the battery and making calls are not supported, and both of those are pretty important to me |
| 01:09.40 | dcordes | ginge: er the latest kaiser-smd.c premy pasted and the rest mostly current git |
| 01:09.51 | dcordes | I can make calls in android with this zImage |
| 01:10.03 | bemasc | but if anyone needs to test something on the hardware... well, I can help |
| 01:10.40 | marajin | ginge: Nice :) |
| 01:11.06 | ginge | hmm. so I also renamed the ril library in the android image. Things seem to have gone a bit odd |
| 01:11.23 | ginge | I am getting the signal bars showing 3 bars instead of 1 |
| 01:11.36 | ginge | no G symbol and the phone app hangs |
| 01:11.46 | dcordes | you renamed what? |
| 01:11.59 | dcordes | I'm not so familiar with how android works |
| 01:12.12 | dcordes | I just extracted the latest dzo rootfs in order to figure out whatit does |
| 01:12.35 | dcordes | but it only cats two files to smd0 in setupmodem.sh |
| 01:12.38 | ginge | me either. I just renamed the vogue CDMA file from dzo's to the orig |
| 01:12.44 | dcordes | and the rest is done by that rild binary |
| 01:12.56 | ginge | right, those cats set up the modem |
| 01:13.11 | ginge | then ril takes over |
| 01:13.29 | dcordes | and ril does something I don't do on the console obviously |
| 01:13.38 | dcordes | maybe I need to set a baud rate in order to make the write work? |
| 01:13.57 | ginge | you cant write? or you cant read? |
| 01:14.21 | dcordes | when I cat, it shows the usual status messages |
| 01:14.31 | dcordes | signal strength and provider sometimes |
| 01:14.35 | ginge | hmm |
| 01:14.43 | dcordes | that's cool |
| 01:14.57 | dcordes | but when I do cat & echo something, it doesn't seem to react |
| 01:15.18 | ginge | dunno too much about that |
| 01:18.06 | ginge | so what key combo would be good for touchscreen calibration. Consider you need to keep your fingers on them the whole time (for now) |
| 01:18.48 | dcordes | both 'softkeys' at the same time |
| 01:19.07 | ginge | which are they, the top ones around the dpad? |
| 01:19.09 | dcordes | the ones beside dial and hangup buttons |
| 01:19.17 | dcordes | right with the - |
| 01:19.28 | ginge | okay. |
| 01:19.45 | ginge | wow. This 1000% more usable now the call buttons works |
| 01:20.09 | dcordes | I'll put it in the bootkit |
| 01:20.25 | ginge | its in the zimage, no android hacking needed |
| 01:20.33 | ginge | I would diff it, but... |
| 01:21.19 | ginge | board-kaiser-kaypad.c |
| 01:21.19 | ginge | change KEY_RED to KEY_END and KEY_GREEN to KEY_SEND |
| 01:21.21 | ginge | thats it |
| 01:22.09 | dcordes | k |
| 01:22.13 | ginge | I will paste a link to the calibration stuff in the next couple of days. I need sleep now. |
| 01:22.26 | dcordes | what's that calibration thin? |
| 01:22.33 | dcordes | g |
| 01:22.37 | dcordes | in android or kernel? |
| 01:22.50 | ginge | screen calibration in kernel for any gui |
| 01:23.10 | ginge | aka a craptastic hack |
| 01:23.23 | ginge | goodnight |
| 01:23.28 | dcordes | ok ^^ maybe we can statically put the calibration somehow? |
| 01:23.32 | dcordes | gnight |
| 01:23.47 | ginge | yeah, I guess once I calibrate once I can print the values |
| 01:24.10 | *** part/#htc-linux ginge (n=baz@cpc6-ward3-0-0-cust579.manc.cable.ntl.com) |
| 01:36.54 | Rom1 | arg sata error on ionstall |
| 01:39.45 | *** join/#htc-linux Othello (i=Magorium@gateway/tor/x-a19c55513665f2a7) |
| 01:49.00 | *** join/#htc-linux dzo (n=dzo@121.98.128.127) |
| 01:55.48 | marajin | dcordes: Hey, didn't you want to ask dzo some stuff? |
| 01:56.05 | dcordes | yes I did |
| 01:56.18 | dzo | hi dcordes, I just sent you some mail. |
| 01:56.25 | dzo | with a new ril |
| 01:56.53 | dcordes | hi dzo thanks |
| 01:57.22 | dzo | should enable sms, do you have smd1 working for data? |
| 01:57.50 | dcordes | I'm not sure if it works, but we have it in the smd-c |
| 01:57.58 | dcordes | kaiser-smd.c |
| 01:58.36 | dzo | try dialing *99***1# and firing up pppd |
| 02:00.53 | dcordes | the hour I've been trying to talk to the modem in the angstrom console image. I can read it using cat but it doesn't seam to react when I put cat&echo things, although I see the at send printk when I do |
| 02:01.12 | dcordes | s/hour/last hour/ |
| 02:02.35 | dzo | perhaps wince disables reporting, try ATV1 and ATE1 |
| 02:02.56 | dzo | if android can dial, it must be working. |
| 02:04.19 | dcordes | ok trying |
| 02:04.57 | dzo | my ril does ATE0Q0V1 then AT+CMUT=0 then AT+CMGF=0 then AT+HTC_GETSYSTIME=0 to init the modem |
| 02:06.17 | dcordes | dzo: booting.. are you aware of the armv6 haret improvements? |
| 02:07.10 | dzo | yep, LDM/STM tracing is useful. |
| 02:08.10 | dcordes | ok I did echo ATV1 > /dev/smd0 && echo ATE1 > /dev/smd0 |
| 02:08.36 | dzo | try ATE0Q0V1 |
| 02:08.52 | dzo | it should say OK |
| 02:10.15 | dzo | don't you need to do echo -e "ATE0Q0V1\r", on vogue it won't work otherwise. |
| 02:10.45 | dcordes | I did "cat /dev/smd0 & echo ATE0Q0V1 > /dev/smd0" |
| 02:11.17 | dcordes | I only got what I get all the time which is CREG CGREG HTCCSQ |
| 02:11.20 | dcordes | messages |
| 02:12.12 | dzo | did you try -e with \r? |
| 02:13.18 | dcordes | hhm nothing |
| 02:22.54 | dcordes | amss hates android ^^ |
| 02:23.07 | dcordes | angstrom I mean |
| 02:39.22 | marajin | grin |
| 02:39.24 | marajin | er |
| 02:39.26 | marajin | grins. |
| 02:39.35 | marajin | blames it on the MUD |
| 04:56.30 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbfd6bc.pool.einsundeins.de) |
| 05:16.24 | *** join/#htc-linux kaboofa (n=tom@rain.angrycoder.org) |
| 05:32.25 | *** join/#htc-linux Marex (n=vasum7am@auryn.karlin.mff.cuni.cz) |
| 05:46.44 | *** join/#htc-linux aLeSD (n=alex@252.Red-79-144-69.staticIP.rima-tde.net) |
| 05:49.23 | *** part/#htc-linux aLeSD (n=alex@252.Red-79-144-69.staticIP.rima-tde.net) |
| 07:03.38 | *** join/#htc-linux evildarknight (n=charles@41.207.132.189) |
| 07:04.19 | *** part/#htc-linux evildarknight (n=charles@41.207.132.189) |
| 07:30.14 | *** join/#htc-linux StyleWarz (i=stylewar@fbettag.qs-housing.net) [NETSPLIT VICTIM] |
| 07:31.19 | *** join/#htc-linux tsdogs (n=tsdogs@net70-17.metalit.net) |
| 08:39.05 | *** join/#htc-linux kiozen (n=oeichler@p5492B5A6.dip0.t-ipconnect.de) |
| 09:15.31 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 09:21.46 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 09:59.54 | *** join/#htc-linux tsdogs (n=tsdogs@net70-17.metalit.net) |
| 10:07.37 | kiozen | BabelO: ? |
| 10:08.22 | BabelO | hi kiozen |
| 10:08.49 | kiozen | hi, I have a question about "ANGSTROM_MODE = uclibc" |
| 10:09.12 | kiozen | do I have to set this just for "bitbake virtual/kernel" |
| 10:09.21 | kiozen | or for compiling the complete image? |
| 10:09.32 | BabelO | kiozen: yes just for virtual/kernel |
| 10:09.37 | kiozen | ok |
| 10:10.12 | kiozen | think last time is still complained not to find that kernal stuff, but let's see |
| 10:10.19 | kiozen | compiling oe once again :) |
| 10:10.37 | kiozen | and chaising bugs in Qlandkarte |
| 10:11.57 | BabelO | lol, it is fast with Q6600 :) |
| 10:12.21 | kiozen | BabelO: not really, currently only one core works |
| 10:13.51 | BabelO | :( don't use muti thread ? |
| 10:14.43 | kiozen | BabelO: yes, I do, but while building important packages like the tool chain, it serializes tasks |
| 10:20.36 | tsdogs | hi all |
| 10:20.50 | kiozen | hi tsdogs |
| 10:21.10 | tsdogs | do you think that Euro 299+15 are worth the neo freerunner hardware? http://www.pulster.de/engl/index.html?openmoko.htm |
| 10:21.20 | tsdogs | hi kiozen |
| 10:21.25 | tsdogs | hi BabelO |
| 10:22.18 | kiozen | hm, if it would work 100% that would be ok |
| 10:22.27 | kiozen | but if it is as bad as the neo |
| 10:22.57 | kiozen | s/neo/old neo/ |
| 10:24.48 | tsdogs | I thought at least the kernel supports everything :/ |
| 10:26.39 | kiozen | goxboxlive was pretty disappointed by the original neo, universal support seems to much better |
| 10:28.03 | tsdogs | hmm also it's using an AGPS |
| 10:28.17 | tsdogs | well Universal is "almost" ready. |
| 10:29.16 | tsdogs | It only would need flashing.. cameras are not so important (though I'm waiting for qtopia4.4 for screen roation if it'll ever come out) |
| 10:30.51 | kiozen | lol, yes, if ever.. |
| 10:31.40 | kiozen | something like the neo, without phone, in a rugged case would be my dream |
| 10:32.02 | tsdogs | lol |
| 10:32.49 | kiozen | the N560 seems to be quite beasty, but you can make it waterproof |
| 10:32.59 | tsdogs | :) |
| 10:34.02 | kiozen | misses a sorting iterator for QMap |
| 10:34.52 | tsdogs | what do u need to sort? |
| 10:36.01 | kiozen | would like to iterate over the items in a QMap sorted by key. Sure I can get the keys, sort them and iterate over the keys, but that is not really efficient |
| 10:37.07 | *** join/#htc-linux LunohoD_ (n=alex@e180071226.adsl.alicedsl.de) |
| 10:37.21 | *** join/#htc-linux pH5 (n=ph5@p5485C15A.dip.t-dialin.net) |
| 11:09.48 | kiozen | BabelO: it still fails |
| 11:11.57 | tsdogs | kiozen kernel ? |
| 11:12.16 | kiozen | no oe, console-image |
| 11:12.27 | tsdogs | what task? |
| 11:12.42 | kiozen | moment try to get a pastebin |
| 11:13.56 | kiozen | pastebin.ca is down :/ any alternative url? |
| 11:14.05 | tsdogs | pastbin.no |
| 11:14.30 | tsdogs | s/past/paste/ |
| 11:16.02 | tsdogs | kiozen: ok |
| 11:16.13 | tsdogs | it's uclibc related anyway :) |
| 11:16.14 | kiozen | http://pastebin.no/9855 |
| 11:16.38 | tsdogs | ANGSTROM_MODE="uclibc" bitbake initramfs-bootmenu-image |
| 11:16.44 | tsdogs | bitbake virtual/kernel |
| 11:16.53 | tsdogs | that should solve the problem I think |
| 11:17.36 | kiozen | ERROR: Unable to parse conf/bitbake.conf (Could not include required file conf/distro/include/angstrom-"uclibc" bitbake initramfs-bootmenu-image.inc) |
| 11:18.05 | tsdogs | ok remove the " |
| 11:18.25 | kiozen | same error |
| 11:19.06 | tsdogs | hmm, that's strange, maybe they changed something |
| 11:20.05 | kiozen | try bitbake initramfs-bootmenu-image from console |
| 11:20.24 | tsdogs | I think that ANGSTROM_MODE=uclibc bitbake initramfs-bootmenu-image worked last time form me |
| 11:21.04 | kiozen | yes, but oe is a mess, and what worked yesterday will not work today :) |
| 11:22.05 | tsdogs | hmm too outdated copy I think, now I even get an error :( |
| 11:22.12 | tsdogs | lol |
| 11:22.33 | tsdogs | there is a °stable° branch but it's not really maintained afaik |
| 11:22.52 | tsdogs | ok updating OE :) |
| 11:23.11 | tsdogs | what version of bitbake u using? |
| 11:24.02 | kiozen | BitBake Build Tool Core version 1.8.11, bitbake version 1.8.11 |
| 11:24.17 | tsdogs | ok, I got 1.8.10 |
| 11:25.09 | kiozen | ok, did |
| 11:25.11 | kiozen | bitbake initramfs-bootmenu-image |
| 11:25.15 | kiozen | bitbake virtual/kernel |
| 11:25.30 | kiozen | ANGSTROM_MODE="uclibc" |
| 11:25.38 | kiozen | removed ANGSTROM_MODE="uclibc" |
| 11:25.47 | kiozen | bitbake console-image |
| 11:25.53 | tsdogs | ok now do console-image ... :) |
| 11:25.56 | tsdogs | result ? |
| 11:26.01 | kiozen | wait .. |
| 11:26.13 | kiozen | restoring chache |
| 11:27.20 | kiozen | looking good so far :) |
| 11:27.53 | tsdogs | ok, that should get you straight to the end of the console-image :) (at least it did for me) |
| 11:28.42 | kiozen | tsdogs: shh, don't say that! This will end right into desaster ;) |
| 11:31.10 | tsdogs | lol |
| 11:33.48 | tsdogs | BabelO: are this your last images for BA? http://www.linuxtogo.org/~htcpxa/htcblueangel/Qtopia/ |
| 11:38.25 | tsdogs | booting first time BA into linux :) |
| 11:47.09 | pigeon | anyone working on linux on the htc prophet? |
| 11:47.32 | pigeon | wiki says "kernel boots" but that's all. |
| 11:47.45 | *** join/#htc-linux ginge (n=baz@cpc6-ward3-0-0-cust579.manc.cable.ntl.com) |
| 11:49.00 | pigeon | works with haret apparently... |
| 11:49.56 | tsdogs | pigeon: it should work with linwizard |
| 11:51.54 | pigeon | tsdogs: thanks, didn't know about linwizard. |
| 12:01.59 | kiozen | cr2: http://www.qlandkarte.org/console-image-htcuniversal.tar |
| 12:02.03 | kiozen | next try :) |
| 12:02.07 | kiozen | bbl |
| 12:02.21 | tsdogs | BabelO: qtopia on BA works pretty good |
| 12:03.58 | BabelO | tsdogs: yes it is fast :) but modem is not really stable |
| 12:05.08 | BabelO | tsdogs: if you can fix the keyboard repeat, should be ok for me :) |
| 12:05.34 | tsdogs | BabelO: haven't tryed with phone and keyboard :) |
| 12:06.25 | tsdogs | BabelO: what about keyboard? it seems to be working good to me |
| 12:08.49 | *** join/#htc-linux swc|666 (n=swc|666@unaffiliated/swc666/x-4934821) |
| 12:09.39 | *** join/#htc-linux timebomb (n=timebomb@e176103062.adsl.alicedsl.de) |
| 12:10.02 | tsdogs | hmm qnetwalk does not handle ok button :( |
| 12:11.26 | timebomb | eyo |
| 12:14.34 | swc|666 | question... if i upgrade a universal to wm6, will there be any issues booting linux sd? |
| 12:16.46 | *** join/#htc-linux tsdogs_ (n=tsdogs@net70-17.metalit.net) |
| 12:17.38 | tsdogs_ | swc|666: it shouldn't but I never tryed |
| 12:18.00 | tsdogs_ | terminal is awfully slow like on uni :( |
| 12:18.33 | swc|666 | tsdogs_: cool... i thought i had read somewhere once about some issues, but i may try it |
| 12:18.57 | tsdogs_ | swc|666: I would not bet on it though ;) |
| 12:19.15 | timebomb | twww |
| 12:19.27 | swc|666 | yep.. me neither |
| 12:19.40 | timebomb | oops wrong layout |
| 12:22.44 | tsdogs_ | BabelO: I think it just killed my battery :) is suspend working on BA? |
| 12:25.19 | *** join/#htc-linux mistadman (n=mistadma@adsl-150-63-154.msy.bellsouth.net) |
| 12:34.08 | *** join/#htc-linux attila (n=attila@hd5b90f99.c45-01-17.dyn.perspektivbredband.net) |
| 12:34.22 | swc|666 | has anyone got debian titchy to work on the BA? |
| 12:36.00 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
| 12:37.41 | attila | hmmm, anyone knows anything about linux on a HTC S730 (wings) ? |
| 12:55.20 | *** join/#htc-linux dcordes_ (n=dcordes@g227203151.adsl.alicedsl.de) |
| 13:02.03 | ginge | hi dcordes_ did you get the ril working from dzo? |
| 13:03.47 | BabelO | tsdogs: yes workibg for boardid5 , for boardid6 cr2 have done something |
| 13:04.06 | *** join/#htc-linux timebomb (n=timebomb@e176111042.adsl.alicedsl.de) |
| 13:04.58 | dcordes_ | ginge: nope |
| 13:05.22 | dcordes_ | it breaks the phone. you can send sms but they don't arrive |
| 13:06.02 | tsdogs | BabelO: ok, battery was not killed, qtopia simply did not resume the fb i think. |
| 13:06.33 | dcordes_ | ginge: and you can't receive sms |
| 13:06.45 | ginge | dcordes_: I tried a non-patched ril, and although the phone and data don't work, the can see the signal strength |
| 13:06.48 | dcordes_ | so basically it doesn't worq |
| 13:06.51 | BabelO | tsdogs: maybe the blank screen, somtimes it is long, or backlight simply |
| 13:07.04 | tsdogs | attila: I think u r the first one for this model, though it's a msm maybe dcordes nows better on this one |
| 13:07.05 | ginge | can we get dzo's diff to the orig? Do you have it already? |
| 13:07.14 | dcordes_ | ginge: ah right with dzo kaiser rill, I was also able to see 3 signal bars |
| 13:07.21 | dcordes_ | yes I do |
| 13:07.27 | dcordes_ | shall I forward it? |
| 13:07.32 | ginge | awesome. Yes please |
| 13:07.36 | tsdogs | BabelO: I'll test it more :) |
| 13:10.42 | BabelO | tsdogs: maybe the blank screen, somtimes it is long, or backlight simply |
| 13:13.57 | dcordes_ | ginge: di you see the msm7200 pcmcia card linux driver thing? |
| 13:14.21 | ginge | yeah. Didn't look overly useful, but I need to go over it carefully |
| 13:15.26 | dcordes_ | same, I think it has an amss which provides more easy access |
| 13:16.38 | dcordes_ | ginge: admin or servo? |
| 13:16.59 | ginge | barry.carter gmail please |
| 13:18.11 | dcordes_ | sent. I already reported back to dzo. hope he'll be able to make something out of it |
| 13:18.53 | dcordes_ | ginge: did you already attempt to manually chat with the modem from within angstrom? |
| 13:19.34 | ginge | not yet. I was going to backport the changes from kaiser_smd.c to smd.c to gain the extra function, either that or wait for Martint o do it. |
| 13:20.13 | dcordes_ | to gain which function? |
| 13:21.00 | dcordes_ | dzo said if dialling works in android it should also be fine from the console |
| 13:25.01 | ginge | proc_comm stuff mainly |
| 13:29.13 | ginge | I take it dzo didn't send you the diffs from stock and vogue for ril? |
| 13:32.15 | dcordes_ | g2g |
| 13:32.21 | dcordes_ | no diffs bye |
| 13:33.25 | ginge | seeya |
| 13:40.27 | timebomb | anyone knows a tool i can load images on minisd from within windows ce? |
| 13:40.32 | timebomb | wm6 or whatever |
| 14:27.10 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 14:29.26 | *** part/#htc-linux SuN (i=unices@ip5652ade4.speed.planet.nl) |
| 14:30.33 | timebomb | hm |
| 14:30.35 | timebomb | psdwrite |
| 14:31.19 | *** part/#htc-linux rmoravcik1 (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 14:49.20 | *** join/#htc-linux rmoravcik1 (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 14:54.38 | *** join/#htc-linux mistadman (n=mistadma@32.135.136.98) |
| 14:56.52 | mistadman | dcordes: Are you going to post the source or diffs for the updates with smd? |
| 15:20.52 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
| 15:20.55 | ginge | mistadman: Martin's last paste is still active http:/void.printf.net/~martin/kaiser-smd.c |
| 15:21.21 | ginge | s/http:/void.printf.net/~martin/kaiser-smd.c/http://void.printf.net/~martin/kaiser-smd.c/ |
| 15:21.27 | mistadman | Thanks ginge! |
| 15:44.44 | dcordes | ginge: any news? |
| 15:45.34 | ginge | not really. I can say for certain that the android sdk libreference.ril is not going to work properly. We need the source. dzo's rewritten version is what we need |
| 15:45.44 | ginge | as for ppp... no, doesn't work |
| 15:47.25 | ginge | did you ever get a response from smd1 |
| 15:50.17 | dcordes | ginge: didn't get my hands on smd1. I wanna be in command ofthe at channel first |
| 15:50.46 | ginge | well it must work, otherwise it would work at all |
| 15:50.58 | dcordes | one openmoko guy told I should do some flow control stuff. but android just redirects bare AT commands with cat output to the smd0 |
| 15:51.03 | dcordes | so why can't I echo the commands? |
| 15:51.12 | dcordes | I get the send irq when I do but no response |
| 15:51.22 | ginge | hmm. odd |
| 15:51.29 | ginge | let me try that |
| 15:51.33 | dcordes | please |
| 15:54.35 | ginge | what commands are trying, and what string |
| 15:55.06 | dcordes | ginge: check the logs last night |
| 15:55.13 | ginge | ok |
| 15:55.16 | dcordes | dzo told me the commands to turn on replies |
| 15:55.20 | dcordes | in the modem |
| 15:55.33 | dcordes | no luck |
| 15:55.43 | ginge | whats the major and minor for the char device? |
| 15:55.47 | dcordes | you could just echo AT and it should reply OK I think |
| 15:55.50 | ginge | 254 7? |
| 15:55.53 | dcordes | c 254 0 |
| 15:55.57 | dcordes | 7 is gps |
| 15:56.03 | ginge | ah, thanks |
| 15:56.11 | dcordes | mknod /dev/smd0 c 254 0 is what I do |
| 15:58.58 | ginge | I just turned on repoting, and now I am getting output |
| 15:59.02 | ginge | I think |
| 15:59.15 | ginge | HTCCCSQ: 2 |
| 15:59.24 | ginge | lots of CREG: |
| 15:59.28 | ginge | is that kernel output? |
| 15:59.43 | dcordes | signal level |
| 15:59.48 | dcordes | that pops up all the time |
| 16:00.01 | dcordes | then you also get thos creg commands which I think report provider id |
| 16:00.24 | dcordes | send nothing to smd0 and you will still get those reports frequently |
| 16:02.16 | ginge | sending AT or ATZ gives m the output ERROR |
| 16:02.41 | *** join/#htc-linux miknix (n=miknix@bl4-84-128.dsl.telepac.pt) |
| 16:03.43 | dcordes | oh that's interesting I didn't get an error |
| 16:03.46 | dcordes | so it works for you |
| 16:03.57 | dcordes | you just need to initialise |
| 16:04.07 | dcordes | try the command sequence dzo told me see logs |
| 16:05.12 | ginge | I just got an OK with ATE0Q0V1 |
| 16:05.48 | dcordes | I have the premy smd, not martin__ one |
| 16:05.58 | dcordes | but I doubt it's a problem since it works for me in android? |
| 16:07.33 | ginge | dunno I have martins latest paste. I get as far as AT+HTC_GETSYSTIME=0 then I get ERROR |
| 16:07.41 | ginge | I am doing this in cu btw |
| 16:08.44 | dcordes | we really need the complete modem sources from dzo |
| 16:08.51 | dcordes | how do you setup cu? |
| 16:09.06 | ginge | cu -l /dev/smd0 |
| 16:09.06 | ginge | nothing else |
| 16:09.13 | dcordes | no error? What's your rootfs? |
| 16:09.28 | ginge | angstrom you built for bluetooth a while back |
| 16:09.37 | ginge | but the originl image also works |
| 16:09.46 | dcordes | original is? |
| 16:09.58 | ginge | the one you had up on your site? |
| 16:10.20 | ginge | you gave me a link a few days ago |
| 16:10.20 | dcordes | ok will try with that one |
| 16:10.33 | dcordes | it's confusing I have like 20 console images |
| 16:11.33 | dcordes | ginge: try to dial a number |
| 16:11.41 | ginge | atdt? |
| 16:11.49 | dcordes | no clue.. |
| 16:11.58 | dcordes | I looked in the moko wiki but that's not well documented there |
| 16:11.59 | ginge | depends if it behaves like a true modem |
| 16:12.08 | ginge | give it a go :) |
| 16:12.23 | dcordes | no I need my phone |
| 16:12.35 | dcordes | I'll try to setup cu later |
| 16:12.45 | ginge | OK |
| 16:12.45 | ginge | NO CARRIER |
| 16:12.45 | ginge | HTCDIS: 0064 |
| 16:13.11 | ginge | well my phone didn't ring, but it did do something |
| 16:13.31 | ginge | I will run strings on the librefence :) |
| 16:14.44 | dcordes | with no carrier I gues it can't dial |
| 16:15.19 | ginge | now, ATD*99***1# gives CONNECT |
| 16:15.31 | ginge | argh need tilde, wherre is it? |
| 16:15.58 | ginge | not in the keymap? arggh |
| 16:16.23 | ginge | I think its connected but I can't quit cu |
| 16:17.15 | dcordes | no sé |
| 16:17.22 | dcordes | señor |
| 16:17.29 | ginge | ~ |
| 16:18.23 | *** join/#htc-linux pH5 (n=ph5@p5485C15A.dip.t-dialin.net) |
| 16:18.36 | dcordes | when we have the modem up, we got our line in |
| 16:18.49 | dcordes | hi pH5 |
| 16:18.56 | pH5 | hej dcordes |
| 16:19.15 | ginge | so to finish this, we need the dzo libreference-ril.so source |
| 16:19.43 | dcordes | I bet he will come up with a new build that works :) |
| 16:19.50 | ginge | if anyone sees dzo ask him if we can get the source, or fix it |
| 16:19.54 | ginge | source is better |
| 16:20.22 | dcordes | did you try sms from the build? |
| 16:20.39 | ginge | I dont understand the question :( |
| 16:20.57 | ginge | oh, you mean sms! |
| 16:21.03 | ginge | right, sorry me stoopid |
| 16:21.07 | dcordes | did you try to send or receive SMS messages from the lib he build? |
| 16:21.09 | ginge | yes, nothing |
| 16:21.13 | dcordes | ok |
| 16:22.34 | dcordes | just to make sure it's not me |
| 16:56.21 | *** part/#htc-linux rmoravcik1 (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 17:22.24 | ginge | is there a vogue research wiki page? |
| 17:22.32 | dcordes | no but titan |
| 17:22.39 | ginge | many memory map? |
| 17:22.41 | dcordes | titan and vogue memory map are identifcal |
| 17:22.49 | dcordes | identical |
| 17:22.52 | ginge | ok, thanks. |
| 17:22.58 | dcordes | afaik |
| 17:24.05 | *** join/#htc-linux infernix (i=nix@unaffiliated/infernix) |
| 17:24.17 | ginge | looks about right. Matches the addresses I see on these logs |
| 17:29.01 | dcordes | which logs? |
| 17:29.20 | dcordes | what are you doing with the vogue's memory map btw? |
| 17:31.26 | ginge | lol. I am rewriting the on screen keyboard driver to work on the kaiser, but mainly getting calibration data out of this phone |
| 17:32.33 | dcordes | ah right calibration would be useful for usability |
| 17:34.08 | *** join/#htc-linux diogene31 (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
| 17:35.31 | *** join/#htc-linux swc|666 (n=swc|666@unaffiliated/swc666/x-4934821) |
| 17:41.18 | *** join/#htc-linux Marex (n=vasum7am@auryn.karlin.mff.cuni.cz) |
| 17:49.21 | BabelO | pH5: did you try it on neo ? http://www.igelle.org/ |
| 17:51.28 | pH5 | BabelO: no, what is that? |
| 17:52.00 | dcordes | BabelO: cool they will also make blueangel and athena images |
| 17:52.05 | dcordes | will try it on kaiser :) |
| 17:52.16 | BabelO | pH5: a distribution, for lobile phone |
| 17:52.20 | dcordes | Igelle is a Linux-based operating system distribution that is designed to run on various different devices, including desktop/laptop computers, cellular phones, mobile internet devices and other small or large computers. |
| 17:57.02 | *** join/#htc-linux pikapika (n=pikapika@mar75-8-88-164-227-147.fbx.proxad.net) |
| 17:57.26 | pH5 | interesting, but I didn't even find time to try the ASU or fs.o images yet. |
| 17:57.37 | pikapika | :) |
| 17:57.38 | Marex | examination period is 0ver |
| 17:57.42 | Marex | err ...0ver |
| 17:57.45 | Marex | errr ...over |
| 17:58.01 | Marex | ... damn ... I was hacking on 0verkill way too much recently |
| 17:58.43 | BabelO | Marex: so you can solve your blackmail issue :) |
| 17:59.59 | Marex | BabelO: yea, but sssssh ;) he is here ;) |
| 18:00.07 | BabelO | lol |
| 18:00.20 | pH5 | ~lart BA for having the SD slot the wrong way around |
| 18:00.20 | apt | rm -rf's BA for having the SD slot the wrong way around |
| 18:18.48 | *** join/#htc-linux exco (n=exco@e181075224.adsl.alicedsl.de) |
| 18:31.27 | *** join/#htc-linux tsdogs (n=tsdogs@62.123.180.130) |
| 18:35.48 | *** part/#htc-linux exco (n=exco@e181075224.adsl.alicedsl.de) |
| 18:58.04 | *** join/#htc-linux Kevin21 (n=Kevin@207-237-52-122.c3-0.avec-ubr12.nyr-avec.ny.cable.rcn.com) |
| 18:58.09 | *** join/#htc-linux swc|666 (n=swc|666@unaffiliated/swc666/x-4934821) |
| 19:18.19 | *** part/#htc-linux swc|666 (n=swc|666@unaffiliated/swc666/x-4934821) |
| 19:22.45 | *** join/#htc-linux goxboxlive (n=goxboxli@242.84-48-176.nextgentel.com) |
| 19:24.23 | *** join/#htc-linux LunohoD (n=alex@e180071226.adsl.alicedsl.de) |
| 19:27.35 | *** join/#htc-linux jeanseb (n=jeanseb@88.164.32.155) |
| 19:27.57 | *** join/#htc-linux tsdogs (n=tsdogs@62.123.180.130) |
| 20:02.05 | ginge | where is the vogue git located? |
| 20:16.27 | dcordes | http://it029000.massey.ac.nz/vogue/ |
| 20:16.38 | dcordes | diffs |
| 20:16.50 | ginge | no git, just a diff? |
| 20:16.54 | dcordes | yep |
| 20:17.00 | ginge | damn |
| 20:17.15 | dcordes | we should merge up kaiser with android, adding premy's polaris improvements |
| 20:17.19 | dcordes | then fiddle in vogue |
| 20:17.26 | ginge | yeah |
| 20:37.48 | cr2 | hi |
| 20:38.32 | cr2 | pH5: yes, on himalaya the SD is done right :) |
| 20:46.49 | cr2 | kiozen: you should remove the universal's modules from the image |
| 20:47.00 | cr2 | kiozen: and enable 'ifup usb0' on boot |
| 20:47.08 | cr2 | otherwise it's -> |
| 20:47.10 | cr2 | root@htcuniversal:~# hciattach /dev/ttyS1 texas 115200 |
| 20:47.11 | cr2 | Texas module LMP version : 0x02 |
| 20:47.11 | cr2 | Texas module LMP sub-version : 0x0e1b |
| 20:47.29 | cr2 | [ 722.680000] egpio set: reg 0 = 0x0005 |
| 20:47.29 | cr2 | [ 722.690000] egpio clear: reg 4 = 0x0008 |
| 20:47.29 | cr2 | [ 722.690000] egpio set: reg 3 = 0x0004 |
| 20:47.29 | cr2 | [ 722.720000] egpio set: reg 4 = 0x000a |
| 20:47.30 | cr2 | [ 723.030000] n560: BT power turned on. |
| 20:47.39 | cr2 | root@htcuniversal:~# hcitool scan |
| 20:47.39 | cr2 | Scanning ... |
| 20:48.00 | cr2 | <PROTECTED> |
| 20:48.20 | cr2 | BT seems to be working. |
| 20:48.46 | cr2 | you can play with the .bts scripts if you'll ever need 921600 bps |
| 20:56.58 | pH5 | cr2: I just 'booted' 2.6.26-rc7 on BA. it's still in bad shape (asic3 irq error spew, the lcd is flickering a bit). |
| 20:57.11 | pH5 | but at least the code is in a state now that will make it easy to submit in parallel with hx4700 once it works. |
| 20:57.38 | cr2 | pH5: nice, we can finally start cleaning up the asic3-related code. |
| 20:58.21 | cr2 | pH5: did you patch w100fb ? |
| 20:58.55 | cr2 | pH5: i've added the 80MHz modeline in hh.org to remove the flickering |
| 20:59.31 | pH5 | no, using upstream w100fb as-is. thanks for the hint, I'll grab that change, too. |
| 21:00.39 | cr2 | ok. |
| 21:00.52 | cr2 | run the diff on the modeline table |
| 21:01.10 | cr2 | hx4700 uses 96MHz clock, and the 80MHz was missing. |
| 21:02.03 | pH5 | for asic3 cleanup we're missing the clocklib and mfd core patches, but I think then most of it will fall into place. |
| 21:02.13 | cr2 | pH5: is the "new" magician code in oe ? |
| 21:02.15 | cr2 | ok. |
| 21:02.41 | pH5 | I'm not too sure about what to do with asic3 spi. I guess we should write a driver for the spi subsystem *shudder* |
| 21:02.52 | cr2 | it seems n560 wants to be merged there too. |
| 21:03.14 | cr2 | pH5: yeah, but BabelO did something similar for omap850 |
| 21:03.29 | pH5 | great, so we have in-house expertise :) |
| 21:03.37 | cr2 | the pio polling spi driver should not be very difficult. |
| 21:04.42 | cr2 | yes, asic3 spi is used in a very primitive way by wince. |
| 21:04.57 | cr2 | another comparable code is locomo spi |
| 21:05.13 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
| 21:05.22 | cr2 | to support the SD card on zaurus sl5500 |
| 21:06.05 | pH5 | does your lcd spi code work on id 6 blueangels? |
| 21:06.26 | cr2 | dcordes tried it, and it did not work for him. |
| 21:06.45 | cr2 | my lcd spi code works on n560. and it's much more complex there. |
| 21:22.21 | pH5 | cr2: do you know what ASIC3 GPIO C11 (charger mode) on blueangel does exactly? |
| 21:23.44 | cr2 | i'll check wiki. |
| 21:24.23 | pH5 | I think it just says "charging related" or somehting like that. |
| 21:25.04 | cr2 | that means i've seen it in battdrv.dll |
| 21:25.31 | cr2 | i don't remember the details now. need to recheck it again.. |
| 21:26.26 | cr2 | rob_w added things like "*really??" |
| 21:27.16 | dcordes | orly? I can sure try again. still have the 6 here |
| 21:30.52 | pH5 | another q is, do the 6 always have toppoly and the 5 always have sony displays? (and what display is on 4) |
| 21:31.04 | pH5 | on the wiki I could only find two datapoints |
| 21:31.56 | cr2 | wiki is a bit incomplete. even when it comes to the asic3 gpios. |
| 21:32.53 | cr2 | pH5: display 4 is identical to 5. it's always sony. toppoly has a completely different flat connector, so you can't even connect it on a "sony" device. |
| 21:33.23 | cr2 | display 4 is used on CDMA blueangel (aka harrier ?) |
| 21:34.25 | cr2 | somebody said that the phone was working on harrier (with gomunicator), but i've never heard any independent confirmation. |
| 21:35.21 | pH5 | ok, thanks. |
| 21:37.00 | cr2 | pH5: the asic3 pwmX settings are well known, but i don't think they are handled by the current lcd/bkl drivers properly. |
| 21:38.26 | dcordes | ginge: ping |
| 21:38.39 | ginge | dcordes: yo |
| 21:39.16 | ginge | dcordes: I mean pong |
| 21:39.18 | dcordes | did you manage to dial? |
| 21:39.46 | ginge | not really. |
| 21:39.59 | cr2 | ginge: did you run strings on rilgsm ? you may also enable the AT log, so you'll see all AT init commands |
| 21:40.16 | ginge | dcordes: but only through a lack of knowing wtf I am doing |
| 21:40.44 | dcordes | cr2: ah that's a good idea. where's the registry entry again? |
| 21:40.48 | pH5 | cr2: cool. maybe we can write a generic pwm driver and use the pwm-backlight that is already in mainline |
| 21:40.50 | ginge | dcordes: yes, I ran strings. I had a look. I am not sure what you are looking for. It works for phone. |
| 21:41.28 | cr2 | pH5: yes. |
| 21:41.28 | dcordes | it works for phone? So you were able to call from the console? |
| 21:41.55 | cr2 | pH5: pwm is a 'better' clock with an extra parameter :) |
| 21:42.06 | ginge | no, but it works through ril which does exactly the same thing, I just couldn't be arsed to actually look through the source of somethig that works. |
| 21:42.59 | ginge | i.e I trust that because libril.so works, my lack of knowledge is the only thing stopping it working ont he console |
| 21:43.51 | dcordes | ginge: I didn't bug dzo about the source since he didn't reply yet |
| 21:44.19 | ginge | dcordes: ok. I could just write a new one, but I dont want to reinvent the wheel |
| 21:44.32 | cr2 | ginge: you'll have a lot of fun with H2W soon :) |
| 21:45.09 | ginge | cr2: k? |
| 21:46.24 | cr2 | dcordes: rilphone.dll |
| 21:46.29 | cr2 | ATZE0S0=0Q0V0X3&C1&D1|+GTKC=2;+CMEE=1;+CRC=1;+CR=1;+CREG=1;+FCLASS=0;+CMGF=0;+CSCS="HEX";+CSSN=0,1;+CLIP=1;+COLP=0;+CCWA=1;+CMUT=0;+CLIR=0;+CNMI=1,2,2,2,0;+CGREG=1;+CUSD=1;+CPPP=1|@v;+RADIOVER|@HTCCSQ=1;+ENCSQ=1|@HTCDIS=1;@HTCSAP=1| |
| 21:46.50 | dcordes | atze |
| 21:47.15 | cr2 | ginge: the headset extended features. it has some spi-type bitbang driver. |
| 21:47.23 | dcordes | cr2: is this some sequence or just random order? |
| 21:47.43 | cr2 | dcordes: an init sequence. |
| 21:47.47 | ginge | cr2: oh joy. Oh well I have written low level SPI banging code before :/ |
| 21:48.00 | ginge | cr2: mainly on embedded chips like AVR or freescale |
| 21:48.04 | cr2 | dcordes: V0 btw. |
| 21:48.13 | dcordes | v0? |
| 21:48.23 | cr2 | ginge: i've just written such hack for the LCD spi control... |
| 21:48.36 | cr2 | dcordes: wince uses numeric response codes. |
| 21:48.56 | cr2 | dcordes: on all devices. |
| 21:49.06 | dcordes | and V0 means this is the initialization sequence? |
| 21:49.45 | pH5 | yup. v stands for verbose. V0 means numeric, V1 means text responses. |
| 21:50.31 | cr2 | +MTVTDISC |
| 21:50.35 | cr2 | wtf is that ? |
| 21:51.12 | cr2 | AT+HTC_GETSYSTIME=0 <- looks like some cdma thing. |
| 21:51.34 | cr2 | i only see the usual AT@SYSTEMTIME=%u,%u,%u,%u,%u,%u |
| 21:51.53 | dcordes | ginge: with the initrd in my ltg file dir cu works hassle free, you say? |
| 21:52.32 | cr2 | dcordes: do you have ~ on the keyboard ? |
| 21:52.39 | ginge | yeah. You might want to create a new zimage with the tilde key mapped in |
| 21:52.41 | cr2 | dcordes: cu without ~ is pita. |
| 21:52.44 | ginge | lol |
| 21:53.05 | cr2 | +HTCAGPS=5| |
| 21:53.05 | cr2 | +HTCAGPS=%d| |
| 21:53.06 | cr2 | @HTCDORMANCYSET=%d| |
| 21:53.06 | ginge | I have it mapped to the document key (fn + right) the code is KEY_GRAVE |
| 21:53.21 | cr2 | weird new msm7200 commands |
| 21:53.50 | cr2 | ginge: yes, the loadkeys solution should be ok too. |
| 21:54.15 | ginge | cr2: yeah I change my images quite often, so easier for me with a kernel map |
| 21:54.23 | dcordes | cr2: did you see the linux driver for that strange msm7200 based pcmcia modem? |
| 21:55.12 | cr2 | no |
| 21:55.36 | cr2 | 90% of the AT commands look the same as on older msm6250/6275 phones. |
| 21:55.51 | cr2 | i'll check diam |
| 21:56.29 | cr2 | hehe. no dump |
| 21:56.42 | *** join/#htc-linux dzo (n=dzo@121.98.128.127) |
| 21:56.44 | dcordes | cr2: somebody posted it in xda http://www.sierrawireless.com/faq/ShowFAQ.aspx?ID=1076 |
| 21:56.49 | dcordes | hi dzo |
| 21:56.54 | dzo | morning |
| 21:57.16 | cr2 | dzo: 0:00 here |
| 21:57.39 | dzo | so it is morning then! 10 am here. |
| 21:57.39 | dcordes | also here |
| 21:58.38 | dcordes | dzo: uisng cu rather than echo makes the communication work in console |
| 21:58.42 | dcordes | on kaiser |
| 21:58.57 | cr2 | dcordes: looks like usb-serial to me. |
| 21:59.28 | ginge | cr2: That was my conclusion too |
| 21:59.36 | dzo | ok, odd echo -e works for me, perhaps kaiser sets up the modem differently. |
| 22:00.12 | ginge | dzo: works for me in console too |
| 22:00.20 | cr2 | AT commands should be issued to endpoint 2 (/dev/ttyUSB0) |
| 22:00.35 | dcordes | dzo: your new ril binary doesn't work |
| 22:01.50 | dcordes | sms app doesn't freeze anymore and claims it sends sms but doesn't and your can't receive sms. phone doesn't work both ways |
| 22:01.51 | dzo | ok, there must be some more gsm related stuff needed, does gsm need SIM related stuff to work? |
| 22:02.27 | dcordes | you must put a PIN to acces the sim card usually |
| 22:02.44 | dcordes | not if your turn it off in the sim |
| 22:03.13 | ginge | thats the SIM PIN command I think. I saw it in strings somewhere |
| 22:03.51 | dcordes | I have PIN turned off since I got ba |
| 22:05.04 | dzo | i've never had a gsm phone so don't know anything about them. |
| 22:05.12 | ginge | dzo: vogue-ts.c doesnt seem to be in your diff, am I missing something? |
| 22:05.15 | dcordes | doesn't cdma have cards? |
| 22:05.48 | dzo | no, cdma has no cards. |
| 22:06.04 | dzo | i'll check where vogue-ts got lost. |
| 22:06.22 | dcordes | I bet you forgot to git-add it before diffing |
| 22:09.18 | Marex | pH5: hi, is n_tihtc deprecated by gsmd or it isnt ? |
| 22:10.02 | dcordes | ginge: on which of my images did you try cu, the one in kaiser-bootkit or the one in images? |
| 22:10.25 | dzo | OK, just put new diff there, against current android-msm (5 june) |
| 22:10.38 | ginge | dzo: thanks |
| 22:10.43 | pH5 | Marex: it isn't, gsmd uses n_tihtc |
| 22:11.05 | ginge | dcordes: I have the one from the bootkit, which works ok. The custom one you did a few days ago is fine too. |
| 22:11.39 | cr2 | Marex: n_??htc filters the frames out. |
| 22:11.59 | *** join/#htc-linux dcordes_ (n=dcordes@unaffiliated/dcordes) |
| 22:12.37 | dzo | my latest code (included in that diff) tries to ramp down the clock on suspend but it may not work completely yet. |
| 22:12.46 | Marex | cr2: ok ... n_erhtc needs revision ;D |
| 22:12.54 | Marex | cr2: how's wm9750 ? |
| 22:12.56 | pH5 | that reminds me, I still didn't get around to check out the bluetooth headset routing that is going on on channel 0x19 there. |
| 22:13.12 | cr2 | Marex: lol. BT works now. |
| 22:14.04 | cr2 | pH5: i still have no idea how BT sound is routed on calypso. |
| 22:14.40 | Marex | cr2: that means what ? |
| 22:14.41 | cr2 | pH5: is there any linux phone where bt headset works ? a780 does it, but it's closed source. |
| 22:15.08 | cr2 | Marex: the sound expert can check wm9750 now :) |
| 22:15.14 | Marex | :E~ |
| 22:15.39 | *** join/#htc-linux surgex (i=surge@pool-71-186-163-107.bflony.fios.verizon.net) |
| 22:15.52 | cr2 | Marex: i'd better pull my hair out on the resume. |
| 22:16.29 | cr2 | Marex: that means that you can use BT on n560 now. |
| 22:16.33 | Marex | cr2: I have palmtx now :) |
| 22:16.45 | Marex | cr2: you know what that means, right ? |
| 22:16.55 | ginge | Marex: daily torture? |
| 22:17.27 | cr2 | LOL |
| 22:17.37 | Marex | might be ;) |
| 22:18.17 | cr2 | Sticky: Hard-SPL or how I learned to stop worrying and love the MPU |
| 22:18.22 | dcordes_ | dzo: how do you control clock on vogue? |
| 22:18.57 | pH5 | cr2: I think there is just a direct pcm connection between the bluecore3 and calypso. |
| 22:19.41 | dzo | msm_clk_ctl, same as msm7x00a but different values for src and div. |
| 22:19.53 | dzo | got to go now, bye all. |
| 22:20.16 | pH5 | hm. manuel teira's w100fb_imageblit is not yet upstream |
| 22:20.52 | cr2 | pH5: and what's happening on 0x19 ? are there some extra gpios to control ? |
| 22:22.14 | pH5 | cr2: ok, the flickering is gone. the irq errors seem to be harder to get rid off. |
| 22:22.44 | pH5 | cr2: yes, I thing that might be it among others. there is one gpio register on the calypso. |
| 22:23.19 | pH5 | I think it sends a command to set up / tear down the pcm channel from the calypso. |
| 22:23.54 | pH5 | I didn't yet find related code in the calypso firmware though, it's only guesswork. |
| 22:24.09 | cr2 | ok :) |
| 22:24.48 | cr2 | pH5: the irq error is in the asic3 gpio mux ? |
| 22:25.05 | cr2 | or for the devices irqs. |
| 22:25.14 | pH5 | All I know is that the code that manipulates the gpio register cannot be easily traced back to code that communicates over the uart. |
| 22:25.49 | pH5 | asic3_irq_demux |
| 22:29.02 | dcordes_ | ginge: I get the lockfile error on "cu -l /dev/smd0" in http://linuxtogo.org/~lgorris/kaiser-bootkit/initrd-android |
| 22:29.17 | ginge | chmod 0777 /dev/lock |
| 22:29.30 | dcordes_ | oh lol... |
| 22:29.51 | dcordes_ | how do you say you got the tilde into kaiser keymap? |
| 22:30.48 | cr2 | pH5: ok. |
| 22:31.12 | cr2 | dcordes: /dev/smd0 is uucp.uucp ? |
| 22:31.34 | dcordes_ | don't know I'm not in the image now |
| 22:33.17 | ginge | I edited the kepmap in board-kaiser-keyboard.c and changed the KEY_DOCUMENT to KEY_GRAVE |
| 22:33.27 | ginge | s/kepmap/keymap |
| 22:34.08 | cr2 | what is wimax on diamond ? |
| 22:36.21 | cr2 | lol |
| 22:36.24 | cr2 | IsChinaACInside - China AC... |
| 22:36.25 | cr2 | IsChinaACInside - AC... |
| 22:36.38 | dcordes_ | wtf |
| 22:38.58 | cr2 | kyoto protocol implementation :) |
| 22:40.39 | dcordes_ | ginge: like that? {KEY_RIGHT, KEY_GRAVE, EGPIO_6_3_KBD_RIGHT, 0, "KBD RIGHT/GRAVE."}, |
| 22:40.46 | dcordes_ | cr2: wtf is china ac? |
| 22:40.56 | ginge | yeah |
| 22:41.56 | cr2 | no idea. |
| 22:58.01 | dcordes_ | ginge: isn't grave `? |
| 22:58.12 | dcordes_ | does that also work instead of tilde? |
| 23:01.47 | dcordes_ | when I chmod 0777 /var/lock/ cu seems to be able to write the lockfile but I get a permission error now |
| 23:01.53 | dcordes_ | permission denied, line in use |
| 23:17.54 | *** join/#htc-linux surgex (i=surge@pool-71-186-163-107.bflony.fios.verizon.net) |
| 23:51.41 | *** join/#htc-linux wireddd (n=wired@unaffiliated/wireddd) |
| 23:58.25 | ginge | dcordes_: because its done with a a modifier, it sends ~ which on US keymap is shift grave |
| 23:59.03 | ginge | I got the line in use error when the zimage I was using was broken |