| 00:16.23 | *** part/#htc-linux exco (n=exco@e181118195.adsl.alicedsl.de) |
| 00:25.20 | Kevin2 | NetRipper: Sorry - no I have no idea why that would be. It seems odd to me that the trampoline would not work on Raphael. I'd suspect the flashlight first. |
| 00:27.36 | Kevin2 | NetRipper: You could try putting a "for (;;) { }" in the preloader after the flashlight sequence -- if I understand correctly, the main processor doesn't actually do the gpio stuff - instead the arm9 picks it up and does the low level work. Maybe something after the flashlight sequence is confusing the other cpu and causing it to stop working.. |
| 00:27.47 | Kevin2 | for ( ; ; ) { } |
| 00:38.56 | *** join/#htc-linux surgex (i=surge@pool-98-118-165-224.bflony.fios.verizon.net) |
| 00:43.28 | *** join/#htc-linux Guimli (n=guimli@ecu69-1-82-231-127-213.fbx.proxad.net) |
| 00:55.11 | tmzt | Kevin2: do I need a mfp_cfg_t for soc gpio's on pxa27x? |
| 01:07.32 | Kevin2 | tmzt: huh? |
| 01:07.59 | tmzt | static mfp_cfg_t littleton_mfp_cfg[] __initdata = { /* LCD */ GPIO54_LCD_LDD_0, GPIO55_LCD_LDD_1, |
| 01:08.20 | tmzt | static mfp_cfg_t littleton_mfp_cfg[] __initdata = { /* LCD */ GPIO54_LCD_LDD_0, GPIO55_LCD_LDD_1, |
| 01:08.24 | Kevin2 | I'm not familiar with it. |
| 01:08.28 | tmzt | ok |
| 01:21.11 | ALoGeNo | lo al |
| 01:22.15 | ALoGeNo | tmzt somthing new? |
| 01:39.33 | *** join/#htc-linux Othello (i=Othello@gateway/tor/x-e4c31cfbfde2dce1) |
| 01:55.06 | *** join/#htc-linux jgw (n=jake@dreamland.sps.lane.edu) |
| 02:01.16 | Arilou | someone have a Debian image for pda ? |
| 02:08.36 | *** join/#htc-linux Guimli (n=guimli@ecu69-1-82-231-127-213.fbx.proxad.net) |
| 02:20.05 | *** join/#htc-linux Guimli (n=guimli@ecu69-1-82-231-127-213.fbx.proxad.net) |
| 02:47.42 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbf947d.pool.einsundeins.de) |
| 03:17.05 | *** join/#htc-linux LunohoD_ (n=alex@e180066223.adsl.alicedsl.de) |
| 03:27.05 | *** part/#htc-linux PoohbaLT (n=Poohba@c-98-235-52-97.hsd1.nj.comcast.net) |
| 03:33.04 | *** join/#htc-linux PoohbaLT (n=Poohba@c-98-235-52-97.hsd1.nj.comcast.net) |
| 05:47.28 | *** join/#htc-linux goxboxlive (n=goxboxli@139.84-48-212.nextgentel.com) |
| 05:48.43 | *** join/#htc-linux dcordes_ (n=dcordes@unaffiliated/dcordes) |
| 05:50.39 | *** join/#htc-linux kiozen (n=oeichler@p5492A044.dip0.t-ipconnect.de) |
| 06:01.25 | tmzt | dcordes_: were you working on porting pxa devices to kernel.git master/ 2.6.26? |
| 06:29.39 | *** join/#htc-linux rmoravcik (n=rmoravci@gtsgw.ttc.cz) |
| 06:51.35 | *** join/#htc-linux nebi (n=nebi@c-498fe253.02-145-7570701.cust.bredbandsbolaget.se) |
| 07:08.27 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 07:12.10 | *** join/#htc-linux BabelO_ (n=fcr@unaffiliated/babelo) |
| 07:12.58 | goxboxlive | hi BabelO_ |
| 07:13.05 | goxboxlive | i have just ordered a new PSU |
| 07:13.20 | goxboxlive | damn, this computer crach became expensive :-( |
| 07:13.44 | BabelO_ | goxboxlive: hi,just today? when do you receive it ? |
| 07:14.16 | BabelO_ | goxboxlive: mine was same, i discover powersupply after |
| 07:14.16 | goxboxlive | BabelO: i'll can go an pickup it up at after 1300 today |
| 07:14.21 | goxboxlive | :-) |
| 07:14.26 | BabelO_ | ok |
| 07:14.40 | goxboxlive | yes, they told me that i had to have the 8 pin power connector for my cpu |
| 07:15.02 | goxboxlive | a 4 ping wasent enough with the MB i had. Lets hope that it is true |
| 07:15.13 | goxboxlive | 4 pin |
| 07:15.36 | goxboxlive | anyway bought a overkill cpu now :-) MIST 1000W |
| 07:15.44 | goxboxlive | s/cpu/psu |
| 07:16.48 | BabelO_ | lol |
| 07:17.22 | BabelO_ | goxboxlive: here all is a perfect silent until you use it for around 5min |
| 07:17.31 | BabelO_ | then fan's speed up |
| 07:19.03 | goxboxlive | :-) ok, i dont care about silence, my build computer is stored in a technical room beside a ventilation unit. Actually i am only using that pc from my laptop, either via ssh or rdesktop :-) |
| 07:27.38 | BabelO_ | oh ok |
| 07:28.08 | BabelO_ | goxboxlive: mine is near TV :) with mythtv on a xen HVM |
| 07:32.21 | BabelO_ | bbl |
| 07:58.56 | *** join/#htc-linux BabelO_ (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 08:10.03 | *** join/#htc-linux GPFerror (n=GPF@cpe-76-187-41-132.tx.res.rr.com) |
| 08:22.07 | goxboxlive | i c . Then it's a point to have a silent computer |
| 08:23.12 | NetRipper | Kevin2, adding the infinite 'for' loop didn't help |
| 08:23.57 | *** join/#htc-linux kiozen (n=oeichler@p5492A044.dip0.t-ipconnect.de) |
| 08:52.36 | *** join/#htc-linux BruteFrce (n=IrcNet@m515e36d0.tmodns.net) |
| 08:53.05 | BruteFrce | tmzt ya up? |
| 09:01.44 | *** join/#htc-linux drasar (n=maik@85.93.161.6) |
| 09:04.09 | *** part/#htc-linux drasar (n=maik@85.93.161.6) |
| 09:35.33 | *** join/#htc-linux ltxda (n=anon@unaffiliated/ltxda) |
| 09:52.26 | kiozen | BabelO_: fixed those multithreading crashes |
| 09:52.38 | BabelO_ | kiozen: :) |
| 09:52.39 | BabelO_ | hi |
| 09:52.46 | BabelO_ | kiozen: how was your metting ? |
| 09:52.54 | kiozen | fun as usual :) |
| 09:53.09 | BabelO_ | kiozen: you do a live demo ? |
| 09:53.48 | kiozen | BabelO_: sure :) it worked. No body was allowed to move the map while searching ;) |
| 09:54.03 | kiozen | but fixed that now |
| 09:54.11 | GPFerror | anyone know status of sd card support for hermes linux port? |
| 09:55.06 | kiozen | BabelO_: but it's really slow for large areas |
| 09:56.25 | BabelO_ | kiozen: i know, there is another solution that can be faster for cross correl |
| 09:56.44 | BabelO_ | kiozen: it is to extract theta / R from picture |
| 09:59.42 | kiozen | BabelO_: one idea would be to skip blocks of white space |
| 09:59.53 | kiozen | instead of parsing over them |
| 10:00.53 | BabelO_ | kiozen: yes also, and to add a density detection to avoid doing parse on small pixel density |
| 10:01.31 | kiozen | BabelO_: depends on the pattern |
| 10:03.58 | BabelO_ | kiozen: just doing a density calculation on the pattern and allow only research if density is close to +/-20% of the pattern |
| 10:05.28 | kiozen | BabelO_: but won't that take as long as just comparing the pixels, and it does not allow to skip quite an area, as any pixel can be the start of a symbol |
| 10:09.15 | BabelO_ | kiozen: should be fast you have already the step in cross correl algo |
| 10:10.19 | kiozen | if(*p1 & 0x02) continue; |
| 10:10.19 | kiozen | <PROTECTED> |
| 10:10.35 | kiozen | it has to compete with that on a pixel base |
| 10:10.55 | kiozen | that is not too much code |
| 10:10.58 | *** join/#htc-linux ltxda (n=anon@unaffiliated/ltxda) |
| 10:11.57 | *** join/#htc-linux tsdogs (n=tsdogs@net70-17.metalit.net) |
| 10:12.04 | BabelO_ | kiozen: yes, so you can bypass the other step |
| 10:12.59 | BabelO_ | but agree with you that the +/- 20 % should in same range that the trigger you set to 200depend of the amount of pixel can take +/- 20% if amount is too small |
| 10:21.44 | *** join/#htc-linux Pablo_Magician (n=pablo@chello089076070006.chello.pl) |
| 10:22.13 | Pablo_Magician | hi. is here anybody with Magician?? |
| 10:23.01 | GPFerror | nope just a Hermes here |
| 10:23.43 | Pablo_Magician | i'm getting white screen while trying to boot images for magician from http://excogitation.de/lastik/ |
| 10:24.58 | GPFerror | i upgraded to storm 2.10 - wm6.1 yesterday |
| 10:34.06 | Pablo_Magician | the only one image that did boot is from http://linuxtogo.org/~ph5/tmp/ |
| 10:35.51 | *** join/#htc-linux ImCoKeMaN (n=imcokema@pool-98-111-112-76.hrbgpa.fios.verizon.net) |
| 10:42.49 | *** part/#htc-linux Pablo_Magician (n=pablo@chello089076070006.chello.pl) |
| 10:50.12 | cr2_ | hi |
| 10:50.30 | cr2_ | BabelO: cuneiform-0.4 does not compile |
| 10:51.01 | cr2_ | i get some weird message from the linker |
| 10:55.45 | *** join/#htc-linux dzo_ (n=dzo@121.98.128.127) |
| 11:57.27 | *** join/#htc-linux Guimli (n=guimli@ecu69-1-82-231-127-213.fbx.proxad.net) |
| 12:05.15 | dcordes_ | hi |
| 12:05.16 | dcordes_ | tmzt: no, sorry |
| 12:14.38 | BabelO_ | cr2_: i can try on the evening |
| 12:15.01 | BabelO_ | cr2_: you still have opensuse ? i have 11.0 at home |
| 12:16.19 | kiozen | BabelO_: optimized search, skipping white space now |
| 12:16.45 | BabelO_ | kiozen: will try :) still trying to compile thing with mingw :( |
| 12:16.55 | kiozen | lol |
| 12:17.25 | BabelO_ | kiozen: i get some free map cr2 show me for france :), i have gif file + ozi map file |
| 12:17.39 | kiozen | link? |
| 12:18.53 | BabelO_ | kiozen: http://users.poehali.org |
| 12:19.08 | kiozen | ok, know that |
| 12:25.42 | BabelO_ | kiozen: zo i can use andrew tool to convertor gt ? |
| 12:26.16 | kiozen | BabelO_: that is what it it intende for, afaik |
| 12:26.32 | BabelO_ | kiozen: ok |
| 12:27.01 | *** join/#htc-linux exco (n=exco@e181081131.adsl.alicedsl.de) |
| 12:27.16 | kiozen | I wonder how I can make gdal to write directly into an opengl texture |
| 12:29.18 | BabelO_ | kiozen: was thinking about opengl bump map :) |
| 12:29.49 | kiozen | BabelO_: faster rendering would be fine for the first place |
| 12:32.50 | *** join/#htc-linux Guimli (n=guimli@ecu69-1-82-231-127-213.fbx.proxad.net) |
| 12:35.42 | BabelO_ | kio, cr2_what is the german word for unassign ? |
| 12:35.52 | BabelO_ | kiozen: ? |
| 12:37.02 | kiozen | unbestimmt? |
| 12:37.05 | kiozen | BabelO_: |
| 12:37.55 | BabelO_ | kiozen: ok thanks :) |
| 12:37.58 | exco | BabelO http://www.dict.cc/?s=unassigned -> unbestimmt, nicht zugeordnet |
| 12:38.34 | BabelO_ | kiozen: is it the meaning of detach ? |
| 12:38.37 | BabelO_ | thanks exco |
| 12:38.49 | kiozen | BabelO_: no |
| 12:38.51 | dcordes_ | nicht definiert |
| 12:38.55 | *** join/#htc-linux pH5 (n=ph5@170.210.132.201) |
| 12:38.57 | BabelO_ | kiozen: oh |
| 12:39.03 | BabelO_ | what is the world then ? |
| 12:39.07 | BabelO_ | word, sorry |
| 12:39.24 | dcordes_ | what is the context? |
| 12:39.46 | BabelO_ | we have link between data flow, and we have to unlink a part |
| 12:39.56 | BabelO_ | we use unassign in english |
| 12:40.18 | kiozen | auflösen |
| 12:40.37 | kiozen | eine Verbindung (link) auflösen |
| 12:41.06 | kiozen | BabelO_: think that's it |
| 12:41.46 | pH5 | good morning |
| 12:41.48 | BabelO_ | kiozen: thanks |
| 12:42.03 | BabelO_ | hi pH5 :) that's morning for you ? you change country |
| 12:42.35 | dcordes_ | ginge: are you there? |
| 12:42.47 | dcordes_ | pH5: morning |
| 12:43.01 | pH5 | BabelO_: I'm in -0300 until end of October, it's the reason I'm offline so much. |
| 12:43.28 | BabelO_ | pH5: oh ok :) what about htcbootloader ? doyou progress ? |
| 12:45.05 | BabelO_ | pH5: -3hour is in the middle of atlantic ? or island |
| 12:45.14 | pH5 | not at all. I didn't even manage to make use of exco's finding of the magician JTAG test points yet. |
| 12:45.36 | pH5 | it's argentina, they don't have daylight savings time right now. |
| 12:45.43 | BabelO_ | ok |
| 12:47.43 | *** join/#htc-linux kiozen (n=oeichler@p5492A044.dip0.t-ipconnect.de) |
| 12:50.14 | exco | pH5: any progress regarding an fso-image? |
| 12:55.02 | dcordes_ | exco: can you code python? |
| 12:55.24 | exco | dcordes_: sorry, no |
| 12:55.50 | pH5 | exco: I'm afraid none. |
| 12:55.52 | dcordes_ | that would be everythin required to add new modems to fso |
| 12:58.43 | exco | dcordes_: I can probably manage that - has it already been done for another HTC device? |
| 12:59.26 | dcordes_ | http://git.freesmartphone.org/?p=framework.git;a=tree;f=framework/subsystems/ogsmd/modems;hb=HEAD |
| 12:59.52 | dcordes_ | that's the hardware specific part in the fso gsm interfacing stuff |
| 13:01.21 | dcordes_ | I was told for msm7* it's best to base on the neptune because that is also multiline |
| 13:01.49 | dcordes_ | don't know about magician and friends. where does AT and data etc go there? seperate serial devices? |
| 13:04.08 | goxboxlive | BabelO: Well no it's at least booting and starting the installation cd, but i have another problem now |
| 13:04.17 | exco | dcordes_: don't know .. yet |
| 13:04.44 | goxboxlive | When i start to install debian it claims that it cannot find the cd player, even though i started debian install from it. |
| 13:05.09 | goxboxlive | And also when i go to the shell and do ls /dev cdrom doesnt exist |
| 13:05.22 | goxboxlive | any help would be apriciated |
| 13:05.43 | goxboxlive | am that far -- from installing winxp |
| 13:05.45 | goxboxlive | :-) |
| 13:07.37 | exco | goxboxlive: /instmnt ? |
| 13:07.56 | goxboxlive | exco: i'll check |
| 13:09.47 | dcordes_ | pH5: would it be easy to put magician modem code in the frameworkd? |
| 13:10.51 | goxboxlive | maybe i should try a bios upgrade |
| 13:17.45 | *** join/#htc-linux LanceHaig (i=c2d8ed19@foresight/member/lhaig) |
| 13:19.10 | *** join/#htc-linux szsoftwa1e (n=sven@e178242228.adsl.alicedsl.de) |
| 13:23.33 | *** join/#htc-linux unomi (n=Garden@ppp-124-120-221-120.revip2.asianet.co.th) |
| 13:26.48 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d87d3d6.pool.einsundeins.de) |
| 13:32.47 | *** join/#htc-linux LanceHaig (i=3efdda0a@foresight/member/lhaig) |
| 13:34.41 | *** join/#htc-linux Arilou (n=DeluxeIR@79.101.86.51) |
| 13:40.27 | goxboxlive | biosupgrade didnt help either |
| 13:43.32 | Arilou | Some know how Linux works on Treo 750 ? |
| 13:44.05 | exco | goxboxlive: http://houseofzeus.com/notblog/?postid=424 |
| 13:46.13 | goxboxlive | exco: thanks, but i am using the testing version . KDE version of the disc. |
| 13:46.27 | goxboxlive | maybe i should try to install from a usb stick instead |
| 13:46.51 | exco | or from network :-) |
| 13:50.15 | BabelO_ | goxboxlive: that's normal error :) |
| 13:50.19 | goxboxlive | exco: i cant that, because linux has not drivers for my onboard network card |
| 13:50.25 | BabelO_ | goxboxlive: you have a jmicron controller |
| 13:50.35 | BabelO_ | goxboxlive: you nee to switch it to compatibility mode |
| 13:50.42 | goxboxlive | BabelO: ok, how did you solve it? |
| 13:50.48 | goxboxlive | in the bios settings? |
| 13:50.55 | exco | goxboxlive: hence the :-) |
| 13:50.57 | BabelO_ | goxboxlive: in the bios settings, look at ide related things |
| 13:51.23 | goxboxlive | BabelO: ok, i'll go up and check. If i am not back in two min it worked :-) |
| 13:59.30 | goxboxlive | BabelO: hmmmmmmm |
| 14:00.04 | goxboxlive | It was AHCI, and i changed it to IDE and compatible mode, but the same is tsill happening. |
| 14:10.56 | Arilou | Linux don't work on Treo 750 ;\ |
| 14:14.30 | *** join/#htc-linux rmoravcik (n=rmoravci@82.99.175.129) |
| 14:14.32 | cr2_ | Arilou: treo750 is hermes-like ? |
| 14:15.04 | Arilou | maybe |
| 14:15.07 | Arilou | don't know... |
| 14:15.44 | Arilou | cr2_ do you try it maybe |
| 14:15.48 | Arilou | on this model ? |
| 14:15.59 | Arilou | i mean on Treo 750 |
| 14:27.51 | *** join/#htc-linux pH5 (n=ph5@170.210.132.201) |
| 14:37.09 | *** join/#htc-linux rmoravcik (n=rmoravci@gtsgw.ttc.cz) |
| 14:43.24 | BabelO_ | goxboxlive: i don't remember well, but i fix it by installing latest opensuse and switch to ide compatibility mode |
| 14:51.40 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d87d3d6.pool.einsundeins.de) |
| 14:53.14 | goxboxlive | BabelO: i c |
| 14:54.18 | BabelO_ | goxboxlive: jmicron was set in opensuse installer but disappear in a version |
| 14:54.26 | BabelO_ | goxboxlive: you have p5Q then ? |
| 14:54.33 | goxboxlive | BabelO_: yes |
| 14:56.24 | cr2_ | Arilou: http://jornada820.sourceforge.net/files/haret/ |
| 14:56.54 | Arilou | cr2_ thx ;) |
| 14:57.30 | cr2_ | Arilou: RD includes the ramdisk, SD is for booting the rootfs off the SD card |
| 14:59.40 | Arilou | cr2_ but zImage.athena is for Treo 750 ? |
| 15:01.28 | BabelO_ | goxboxlive: then better for you is to use unetbootin to install a usb key and boot to network installer |
| 15:01.52 | cr2_ | Arilou: athena is for athena |
| 15:02.12 | Arilou | ok |
| 15:02.51 | cr2_ | Arilou: get the treo750*RD* file, and run it. |
| 15:03.25 | Arilou | ok |
| 15:03.48 | Arilou | but if i get the treo750*rd* file, do i need to have a two partitions |
| 15:03.59 | Arilou | one VFAT, seconf EXT3 ? |
| 15:04.01 | Arilou | *second |
| 15:04.04 | goxboxlive | BabelO: dont you forget that i dont have a networkdriver :-*) |
| 15:04.13 | goxboxlive | i have to install that one after installing linux |
| 15:04.33 | BabelO_ | goxboxlive: that's not a problem for that, depend what entwork installer you use |
| 15:05.09 | BabelO_ | goxboxlive: some distribution like suse already embed the network controller you need, i install my computer over internet |
| 15:07.01 | *** join/#htc-linux rmoravcik (n=rmoravci@gtsgw.ttc.cz) |
| 15:09.58 | *** part/#htc-linux Arilou (n=DeluxeIR@79.101.86.51) |
| 15:09.58 | cr2_ | Arilou: RD is completely standalone |
| 15:15.22 | *** join/#htc-linux marmotta (n=skodde@unaffiliated/skodde) |
| 15:16.22 | cr2_ | BabelO: compiled cuneiform on p4. and compared the output with ocrad |
| 15:17.10 | cr2_ | BabelO: cuneiform is really good, bt sometimes makes the errors which ocrad does not have. |
| 15:22.12 | BabelO_ | cr2_: what kind of error ? segmentation ? |
| 15:22.47 | cr2_ | BabelO_: no. it detects Z instead of E |
| 15:24.03 | BabelO_ | cr2_: oh ? that's a big mistake B for 8 is ok but Z for E ... strange what is you font ? |
| 15:24.27 | BabelO_ | cr2_: and if i rememeber , you have to set language to get good result |
| 15:25.52 | *** join/#htc-linux rmoravcik (n=rmoravci@gtsgw.ttc.cz) |
| 15:37.50 | cr2_ | BabelO_: ocrad-> BERGISCHE , cuneiform -> BZRGESCHE |
| 15:37.57 | cr2_ | the first one is correct |
| 15:38.24 | cr2_ | BabelO_: but the overall quality of cuneiform is much better. |
| 15:39.22 | cr2_ | the font comes from some stoneage typewriter. |
| 15:39.28 | BabelO_ | cr2_: ok, cuneiform use dictionnary, and the opensource version have some lack with specific font but i did not see that kind of error, |
| 15:39.45 | BabelO_ | maybe because many of my word are in dictionnary of the language |
| 15:55.32 | goxboxlive | hmm i'll test kubuntu then |
| 16:01.00 | *** join/#htc-linux GPFerror (n=gpferror@cpe-76-187-41-132.tx.res.rr.com) |
| 16:09.08 | cr2_ | BabelO_: can i edit my personal dictionary, like ispell ? |
| 16:10.05 | BabelO_ | cr2_: yes you can do that, but don't think it is ispell :) they just use a computelev with dictionnary |
| 16:11.10 | *** join/#htc-linux chab7 (n=kvirc@212.92.4.114) |
| 16:14.00 | goxboxlive | Why dont i listen to people at diffrents forums. I read this before i bought the P5Q card, it has this heading: Don't buy P45 chipset (especially Asus P5Q). |
| 16:15.56 | exco | you could just give it back, goxboxlive |
| 16:16.30 | *** join/#htc-linux diogene31_ (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
| 16:17.01 | BabelO_ | goxboxlive: why, this is a good good mb |
| 16:25.05 | NetRipper | cr2_ , there have been new commits on the android git, maybe there's something useful |
| 16:25.08 | NetRipper | gtg dinner |
| 16:33.03 | goxboxlive | BabelO: it's a stupid MB. I am allmost using it in my fireplace. |
| 16:33.37 | goxboxlive | I tried booting kubuntu, but the screen is just a mess. And i cant add vga=771 like in debain |
| 16:33.41 | BabelO_ | goxboxlive: no, try to use opensuse instead of debian |
| 16:33.58 | BabelO_ | goxboxlive: kunbuntu ? oh |
| 16:34.09 | BabelO_ | goxboxlive: you use unetbootin like i says ? |
| 16:34.47 | goxboxlive | BabelO: i am not familiar with opensuse. I have been using debain since i started to use linux, so i'd rather stay with debian and figure something out. Maybe i should return the board and wait for a P5K instaed |
| 16:34.59 | goxboxlive | BabelO: no, what is unetbootin |
| 16:35.41 | BabelO_ | goxboxlive: unetbootin create a usb boot key for you, you just choose you distrib, and you have lot of choice, there is many debian option |
| 16:36.02 | BabelO_ | goxboxlive: did you try to boot your old hardriver in new computer ? |
| 16:36.31 | goxboxlive | BabelO: no i havent tried to boot my old debina installation. |
| 16:36.38 | goxboxlive | should i try that? |
| 16:37.03 | BabelO_ | goxboxlive: i think yes :) |
| 16:37.35 | goxboxlive | BabelO: but wouldnt that just crash? |
| 16:42.19 | BabelO_ | goxboxlive: no, linux is not windows |
| 16:42.33 | BabelO_ | goxboxlive: i use same opensuse install of three computer |
| 16:42.46 | goxboxlive | hmm ok, then i try |
| 16:43.21 | BabelO_ | goxboxlive: because i never buy a cdrom unit, so each time i boot my old hardrive and add kernel installer to grub and install a new distrib in another partition |
| 16:45.38 | szsoftwa1e | evening! |
| 16:46.11 | BabelO_ | evening szsoftwa1e |
| 16:46.19 | BabelO_ | goxboxlive: i go to home, bbl in few minutes |
| 16:46.21 | *** part/#htc-linux BabelO_ (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 16:47.45 | szsoftwa1e | apt: ghost ? |
| 16:48.39 | cr2_ | NetRipper: these are minor cleanups |
| 16:51.47 | *** join/#htc-linux miknix (n=miknix@bl4-84-40.dsl.telepac.pt) |
| 17:01.49 | *** join/#htc-linux Guimli (n=guimli@ecu69-1-82-231-127-213.fbx.proxad.net) |
| 17:02.40 | *** join/#htc-linux lastik_ (n=linuxrul@80.92.96.29) |
| 17:10.49 | BabelO | goxboxlive: so :) |
| 17:14.23 | *** join/#htc-linux dzo_ (n=dzo@121.98.128.127) |
| 17:30.15 | *** join/#htc-linux Spike1506 (n=Joshua@cable-62-238-192-3.zeelandnet.nl) |
| 17:31.06 | goxboxlive | BabelO: well, my grub is corrupt, and the backup i have on a floppy will not my machine read. |
| 17:31.22 | goxboxlive | I need to checkout the unibootstufff |
| 17:32.45 | BabelO | goxboxlive: why corrupt ? you can t adjust it by hand? |
| 17:34.49 | goxboxlive | eroor 32 |
| 17:34.52 | goxboxlive | or something |
| 17:35.50 | goxboxlive | BabelO: is it only 3 files i need with uniboot? |
| 17:36.11 | goxboxlive | debian-LennyBeta2-i386-kde-CD-1.iso ldlinux.sys unetbootin-linux-282 |
| 17:37.05 | BabelO | goxboxlive: i just use unetbootin with no file, just select distribution you want |
| 17:37.33 | goxboxlive | BabelO: but you need a running OS to execute rigt? |
| 17:38.06 | BabelO | goxboxlive: you need a running os to create the usb boot key |
| 17:39.40 | goxboxlive | ok that i have |
| 17:40.00 | tmzt | dcordes_: you here? |
| 17:40.04 | BabelO | goxboxlive: windows is ok too |
| 17:41.47 | goxboxlive | BabelO: No i am aslo using debian on my laptop. But now i understand what uniboot is |
| 17:42.22 | goxboxlive | i can create a boot usb stick with another computer. I thought i had to add it to my usbstick and boot it somehow |
| 17:42.24 | goxboxlive | :-) |
| 17:43.14 | goxboxlive | Now i have to try it, bbl |
| 17:51.53 | goxboxlive | hmm |
| 17:52.16 | goxboxlive | well i got a beer, hope it helps :-D |
| 18:09.05 | goxboxlive | nope is ask for cd no mather what. <if i only had an old network card laying around then i could use netinstall |
| 18:13.49 | tmzt | cr2_: how do I find usb PUEN with haret? |
| 18:17.35 | *** join/#htc-linux amd64lover (n=miknix@213.13.201.239) |
| 18:18.17 | *** join/#htc-linux miknix (n=miknix@bl3-201-239.dsl.telepac.pt) |
| 18:22.52 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbffb80.pool.einsundeins.de) |
| 18:23.00 | szsoftwa1e | dcordes_: The frame buffer image viewer (fbi) is working on polaris! Just see the 1st picture. Will do further sd-reading tests. :-) |
| 18:26.08 | *** join/#htc-linux kaze (n=kaze@pac33-1-82-235-251-34.fbx.proxad.net) |
| 18:28.03 | BabelO | goxboxlive: just select a distrib on top and set your usb key on bottom and clock on generate |
| 18:30.12 | szsoftwa1e | BabelO: evening |
| 18:30.35 | BabelO | evening szsoftwa1e |
| 18:30.43 | szsoftwa1e | tmzt: cr2_ goxboxlive NetRipper also evening :-) |
| 18:30.56 | BabelO | k |
| 18:31.20 | szsoftwa1e | can I use same command alias procedure with ash as it's done with bash? |
| 18:33.45 | kaze | anyone build latest kaiser kernel with rtc driver? |
| 18:34.16 | szsoftwa1e | in bash I put permanent aliases in .bashrc, what toto in ash? .ashrc? |
| 18:34.44 | szsoftwa1e | s/toto/to do/ |
| 18:37.34 | *** join/#htc-linux Marex (n=vasum7am@auryn.karlin.mff.cuni.cz) |
| 18:42.12 | *** join/#htc-linux ali1234 (n=al@robotfuzz.co.uk) |
| 18:42.41 | goxboxlive | BabelO: yes i did and when i try to use debina netinstall it complaines about missing networkcard driver |
| 18:43.20 | goxboxlive | BabelO: what if i try out your initrd and zImage |
| 18:43.20 | BabelO | ok, did you try another ? |
| 18:43.50 | BabelO | goxboxlive: inverse, you need my zImage and debian initrd :) |
| 18:44.33 | goxboxlive | what debian initrd? |
| 18:45.31 | goxboxlive | BabelO: do you have the network driver in your kernel zImage? |
| 18:45.43 | BabelO | goxboxlive: network install is a simple zImage with a big initrd that contain all stage for net install |
| 18:45.52 | BabelO | goxboxlive: yes and jmicron too |
| 18:46.07 | goxboxlive | ok good, can you send me your kernel |
| 18:46.11 | BabelO | goxboxlive: so you have a bootable usb key now ? |
| 18:46.28 | goxboxlive | BabelO: yes it works with the UNetboot |
| 18:46.33 | goxboxlive | thx for the tip |
| 18:47.01 | dcordes_ | tmzt: now |
| 18:47.12 | BabelO | goxboxlive: :) i spent time to search for non cdrom install |
| 18:47.13 | dcordes_ | szsoftwa1e: nice. you should also try mplayer |
| 18:47.36 | dcordes_ | szsoftwa1e: with which kernel (version/source/patch) are you doing sd testing? |
| 18:47.43 | goxboxlive | BabelO: but i cant mix your kernel and debian initrd. It isent sure that they will fit eachother |
| 18:48.12 | tmzt | dcordes_: great, now if I could remember what I was going to ask you |
| 18:48.45 | dcordes_ | tmzt: something msm7* related? |
| 18:49.08 | BabelO | goxboxlive: should work together :) mail is sending |
| 18:49.10 | szsoftwa1e | dcordes_: 2.6.24 |
| 18:49.24 | BabelO | goxboxlive: sent, bbl in few minutes for with a pizza :) |
| 18:49.33 | goxboxlive | :-) |
| 18:49.34 | szsoftwa1e | dcordes_: what about fb keyboard status in 2.6.25? |
| 18:49.37 | goxboxlive | thx i got it |
| 18:49.42 | tmzt | dcordes_: I was asking before if you were working on converting pxa to the new kernel, but I don't think that is what I was going to ask a few minutes ago |
| 18:49.43 | dcordes_ | szsoftwa1e: the htc-msm code? It has the oldest msm_sdcc available for kaiser/polaris :) |
| 18:50.24 | szsoftwa1e | dcordes_: but it works so far. Recommend better one with working fb keyboard :-) |
| 18:50.45 | dcordes_ | szsoftwa1e: ok just don't do any SD testing or debugging in it. |
| 18:51.07 | dcordes_ | tmzt: yea as I said I fear I can't help with that |
| 18:51.21 | szsoftwa1e | dcordes_: but reading lot of 3-10MB pictures from it is testing, no? |
| 18:51.25 | dcordes_ | tmzt: something OE related maybe? |
| 18:52.07 | dcordes_ | szsoftwa1e: what I'm trying to say is, it is wasted time trying to improve the old msm_sdcc and dma code in 2.6.24 git |
| 18:52.20 | tmzt | dcordes_: right. OE builds hhXX kernels for pxa devices (uni, magician) ? what would be needed to make it use kernel.git master or "htc-pxa" or something and still build the initramfs for rootdelay= ? |
| 18:52.39 | szsoftwa1e | dcordes_: mplayer must wait. First I want to review vogue-ts.c. Maybe I can fix the kb (incorrect/nontypeable symbols) for polaris |
| 18:53.12 | tmzt | dcordes_: and also, what do I do with angstrom oe dev image after psplash stops ?? but I have switched to debian and am looking at usb networking right now |
| 18:53.34 | szsoftwa1e | dcordes_: I didn't expect much work in 2.6.24. My sd testing is implicit, hehe |
| 18:54.46 | tmzt | dcordes_: I don't have uni, magician or apache, but I am looking at making 2.6.26 work on them. I just need someone to test and probably somewhere to post zImage/initrd/rootfs |
| 18:55.32 | dcordes_ | tmzt: yes the htc machines in OE definetly need some love. bitbake selects the kernel to build for a certain machine type using a variable in org.oe.dev/conf/machine/<machine>.conf PREFERRED_PROVIDER_virtual/kernel = "<package name of kernel>" |
| 18:56.48 | dcordes_ | tmzt: in case of magician that is PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6" |
| 18:58.43 | cr2_ | tmzt: you connect and disconnect the usb cable. then you should see the puen, and charging related gpios. |
| 18:59.04 | tmzt | which means I need to switch to bluetooth or do this through startup.txt |
| 18:59.15 | dcordes_ | tmzt: so you would have to create a new recipe for linuxtogo devices, for example org.oe.dev/packages/linux/linux-htc-pxa.bb and put the correct source information etc. an example of how to use linuxtogo git for that purpose is packages/linux/linux-kaiser.bb |
| 18:59.49 | goxboxlive | BabelO: no it didnt work. It seem like your kernel didnt had the network driver inside. Are you sure you are not running it witha module? |
| 19:01.06 | cr2_ | tmzt: or you connect over local putty or how it is called |
| 19:01.30 | tmzt | doesn't work on smartphone yet, and no wifi |
| 19:01.59 | *** join/#htc-linux EA2 (n=chipper@cpe-024-074-138-191.carolina.res.rr.com) |
| 19:02.09 | tmzt | if I can do it with earlyharetlog.txt and startup.txt I will do it that way |
| 19:05.41 | tmzt | cr2_: do I need to addlist anything ? |
| 19:06.00 | cr2_ | yes, you can use any commands. |
| 19:06.36 | cr2_ | no, gpio tracing is already built-in |
| 19:06.48 | cr2_ | add watch gpios |
| 19:06.54 | cr2_ | and then press enter |
| 19:13.03 | tmzt | cr2_: can I ignore these, or can I put this into haretconsole somehow? |
| 19:13.07 | tmzt | 002536: 00640144: mem IRQS(0) a5200000=02000000 (02000000) |
| 19:13.07 | tmzt | 002536: 00640391: mem IRQS(0) a5200000=00800000 (00800000) |
| 19:13.08 | tmzt | 002536: 00640f7a: mem IRQS(0) a5200000=04000000 (04000000) |
| 19:13.46 | *** join/#htc-linux hqqh (n=hqqh@e178167211.adsl.alicedsl.de) |
| 19:13.51 | cr2_ | tmzt: you can add 'ibit irqs ...' and 'ibit gpios ...' |
| 19:13.56 | cr2_ | to prevent spaming |
| 19:14.23 | tmzt | cr2_: okay, but how do I find out which irq/gpio it is from the bitfield? |
| 19:14.51 | tmzt | those are 32bit values, each bank? |
| 19:15.40 | tmzt | 0000 0010 is 7? |
| 19:22.17 | BabelO | goxboxlive: sure, i compile always in... i try to do another kernel for you, wait |
| 19:22.39 | goxboxlive | thx |
| 19:23.06 | BabelO | goxboxlive: can you give me back the link of driver please |
| 19:23.19 | goxboxlive | what link? |
| 19:23.34 | goxboxlive | ohh the networks driber, hold on |
| 19:24.43 | goxboxlive | wget http://dlsvr03.asus.com/pub/ASUS/mb/socket775/P5KPL-CM/LinuxDrivers.zip |
| 19:30.10 | cr2_ | tmzt: 10 is 1 ? |
| 19:30.30 | cr2_ | tmzt: yes, it's painful without .py now |
| 19:30.32 | tmzt | cr2_: I got it right-to-left 26 |
| 19:30.39 | cr2_ | ok |
| 19:30.47 | tmzt | cr2_: but I got it from haretconsole for a baseline |
| 19:30.57 | tmzt | cr2_: I get a lot of USBc |
| 19:31.12 | tmzt | cr2_: now I am trying without usb connect with startup.txt |
| 19:31.13 | BabelO | goxboxlive: i ve not same patch, that s why |
| 19:31.29 | goxboxlive | ok |
| 19:36.20 | BabelO | goxboxlive: ok i do the kernel now, just finish the pizza :) |
| 19:36.34 | goxboxlive | thx |
| 19:48.20 | BabelO | goxboxlive: it seem your card is a bit different, kernel still compiling, else i have another patch only for pci ids |
| 19:49.14 | goxboxlive | BabelO: i c , |
| 19:50.45 | *** join/#htc-linux miknix (n=miknix@213.13.204.34) |
| 20:10.15 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d87d3d6.pool.einsundeins.de) |
| 20:13.56 | BabelO | ola kiozen |
| 20:14.06 | kiozen | ola |
| 20:14.56 | BabelO | kiozen: compiling updated sources |
| 20:15.44 | BabelO | goxboxlive: ok, i manage to compile driver in the kernel it seem |
| 20:15.55 | goxboxlive | cool |
| 20:16.10 | BabelO | goxboxlive: how do you see network was not working ? |
| 20:16.41 | goxboxlive | BabelO: The installer didnt find the network card |
| 20:17.07 | goxboxlive | so if it where working i woulndt have had the question about a driver for the network card |
| 20:17.50 | BabelO | goxboxlive: did you check other console ? there is often a dmesg console |
| 20:18.25 | goxboxlive | Yes i know, but i didnt check dmesg, becuase of the missing driver |
| 20:19.07 | cr2_ | kiozen: pdocread :) |
| 20:19.52 | cr2_ | kiozen: i want to pick the wpts from 76cx and upload them to osm, after editing the names and types. how should i proceed ? |
| 20:20.07 | BabelO | goxboxlive: ok, compiled sending email now |
| 20:20.17 | goxboxlive | thx |
| 20:20.24 | kiozen | cr2_: download with qlandkarte, edit the wpt, save to gpx |
| 20:20.54 | cr2_ | kiozen: save to gpx is bad |
| 20:21.18 | cr2_ | i'd prefer some better format. |
| 20:21.21 | tmzt | cr2_: I have "ibit irqs " the irqs I found with haretconsole, haretconsole no longer reports any irqs. they still appear in haretlog.txt |
| 20:21.35 | cr2_ | kiozen: .csv maybe |
| 20:21.44 | kiozen | cr2_: there seems to be some script that can send gpx to osm |
| 20:22.00 | kiozen | there was some talk on osm-dev list some days agao |
| 20:22.49 | cr2_ | kiozen: if there is no reasonable way to save .osm instead of .gpx, there should be some other format. |
| 20:23.34 | cr2_ | .gpx really sucks for parsing. |
| 20:23.36 | BabelO | goxboxlive: sent |
| 20:23.42 | goxboxlive | i got it |
| 20:23.47 | goxboxlive | i'll try it. bbl |
| 20:23.52 | cr2_ | as any *cough* xml format. |
| 20:23.53 | kiozen | cr2_: the trick is to focus to gpx only and to use gpsbabel to convert it to all other stuff |
| 20:24.41 | cr2_ | kiozen: it's an unsolvable problem, like .shp -> .mp |
| 20:24.48 | kiozen | and osm should understand gpx as it is xml and thus standard ;) |
| 20:26.02 | cr2_ | kiozen: there should be some policy for tag/type conversion. it will never happen in osm. |
| 20:26.25 | goxboxlive | BabelO: yes, network card where found, Thanks |
| 20:26.44 | BabelO | goxboxlive: :) hope it works, i change driver a bit to compile it in kernel |
| 20:27.35 | goxboxlive | :-) |
| 20:29.43 | BabelO | goxboxlive: hope also your harddrive is seen |
| 20:30.54 | kiozen | cr2_: did you try gpsbabel with output format osm? |
| 20:39.40 | BabelO | goxboxlive: so ? still installing ? |
| 20:40.29 | goxboxlive | BabelO: NOPE |
| 20:40.42 | goxboxlive | It failed when it was trying to set up the network |
| 20:40.55 | goxboxlive | i have to set it static and it froze |
| 20:41.13 | goxboxlive | i also tried out dhcp but it didnt work either |
| 20:41.29 | BabelO | :( |
| 20:41.41 | cr2_ | kiozen: no, i can't imagine that it will work |
| 20:42.25 | goxboxlive | BabelO: maybe i should just return it and wait for the P5K instead |
| 20:43.02 | goxboxlive | BabelO: do you have any of this problems with your card? Did you say that you didnt have a cd player? |
| 20:44.40 | goxboxlive | i see that P5N is available, maybe i rather should go for that card |
| 20:51.28 | BabelO | goxboxlive: ok, but network card is not detected ? |
| 20:51.46 | BabelO | goxboxlive: can you try to generate a usb bott with opensuse 11 ? |
| 20:52.38 | BabelO | kiozen: how i can start search now ? |
| 20:53.02 | kiozen | BabelO: select mask, select area, press start |
| 20:53.26 | BabelO | kiozen: so there is a little bug :) |
| 20:53.46 | BabelO | kiozen: i f start by selecting symbol, i can't switch to select area mode |
| 20:54.32 | kiozen | ???? what is the problem? |
| 20:54.32 | goxboxlive | BabelO: yes it is detected, but it failes connecting |
| 20:55.35 | BabelO | kiozen: oh i understand now, it is because i try to draw area on binary picture |
| 20:55.41 | kiozen | lol |
| 20:55.51 | kiozen | no, that doesn't make sense :) |
| 20:56.20 | BabelO | kiozen: yes but if i click on area button need to switch tab to colour map |
| 20:56.24 | BabelO | automatic :) |
| 20:56.50 | BabelO | kiozen: anyway you do a nice GUI, it works well with thread |
| 20:57.06 | kiozen | ok, that should be feasible |
| 20:57.24 | kiozen | yes but still buggy, don't move the map too much while seraching |
| 20:58.06 | szsoftwa1e | hello guys. I have a little problem concerning fb-orientation. The app fbi starts in portrait, so the statusbar is on the right side. But the console is shown in landscape. I used fbcon:rotate in default.txt. Where do I have to look to solve the problem? |
| 20:58.47 | BabelO | goxboxlive: opensuse fails too ? |
| 20:59.06 | goxboxlive | BabelO: :-) i havent tried |
| 20:59.27 | BabelO | goxboxlive: try it and if it works get the kenrel :) |
| 20:59.42 | goxboxlive | ok |
| 21:00.38 | kiozen | bbl |
| 21:01.45 | *** join/#htc-linux herriojr (n=Miranda@65.173.101.2) |
| 21:02.08 | goxboxlive | BabelO: 11 or factory? |
| 21:02.22 | BabelO | goxboxlive: factory is better :) |
| 21:02.30 | BabelO | for kernel driver |
| 21:02.37 | goxboxlive | is it newer? |
| 21:02.46 | BabelO | yes last last compile |
| 21:02.51 | goxboxlive | ok |
| 21:02.55 | BabelO | goxboxlive: it is close to a nightly build |
| 21:03.51 | goxboxlive | i c the link where down |
| 21:03.55 | goxboxlive | i'll try ubuntu |
| 21:04.18 | BabelO | else 11.0 is the newer |
| 21:04.22 | BabelO | the one i have |
| 21:05.00 | goxboxlive | Testing daily build of ubuntu now |
| 21:05.52 | goxboxlive | BabelO: do you think this card will get better support in linux, or is it just a flawcard? |
| 21:06.16 | goxboxlive | I have read that many people are having troublw with this card using linux |
| 21:06.29 | BabelO | goxboxlive: support is already well done |
| 21:06.37 | BabelO | goxboxlive: it is in 2.6.27 |
| 21:06.43 | goxboxlive | ok |
| 21:06.50 | goxboxlive | what kernel version did you build for me? |
| 21:06.59 | BabelO | goxboxlive: 2.6.25 |
| 21:07.07 | goxboxlive | ok i c |
| 21:07.11 | BabelO | goxboxlive: i can build a newer else |
| 21:07.25 | goxboxlive | with the native network driver? |
| 21:07.35 | goxboxlive | linux driver, not the one from asus |
| 21:07.48 | BabelO | goxboxlive: yes, but native is only supported as module not build in |
| 21:07.51 | BabelO | i change it a little |
| 21:07.57 | goxboxlive | really |
| 21:08.13 | goxboxlive | But isnt it a part of the linux source? |
| 21:08.55 | BabelO | goxboxlive: no it is a separate module which need kernel |
| 21:09.02 | BabelO | goxboxlive: downloading 2.6.27 |
| 21:09.13 | goxboxlive | cool |
| 21:09.24 | BabelO | goxboxlive: i compile it with same parameter, let me 30 min if it is not too late for you ? |
| 21:09.44 | goxboxlive | no not at all. I'll wait. I'll test ubuntu meanwhile |
| 21:10.34 | goxboxlive | BabelO: remeber that my card has the intel p45 and not p35 |
| 21:10.47 | BabelO | goxboxlive: yes :) |
| 21:11.00 | goxboxlive | good |
| 21:12.27 | BabelO | zcat /proc/config.gz > .config |
| 21:13.15 | BabelO | oups sorry :) |
| 21:14.08 | BabelO | goxboxlive: starting build now |
| 21:16.45 | szsoftwa1e | Guys,don't want disturb your discussion. Let me ask, how to set fonts for framebuffer console (not fbcon:font trough kernel line) |
| 21:16.51 | goxboxlive | thx |
| 21:22.29 | BabelO | szsoftwa1e: in kernel settings |
| 21:23.53 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
| 21:24.06 | goxboxlive | BabelO: ubuntu had the network driver. I am trying to combine it with debian now. X is a mess in (k)ubuntu |
| 21:24.44 | BabelO | szsoftwa1e: you have it under driver / video /framebuffer you can choose font size |
| 21:24.55 | *** join/#htc-linux Guimli (n=guimli@ecu69-1-82-231-127-213.fbx.proxad.net) |
| 21:28.26 | szsoftwa1e | BabelO: thats the way, how I can set/change it in default.txt with fbcon:font=. I've compiled all console fonts in. So it's not possible, to use a ttf (monospace) font in fb console? |
| 21:29.32 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 21:29.48 | BabelO | szsoftwa1e: don't know, check Documentation under linux kernel source |
| 21:30.42 | kaze | <PROTECTED> |
| 21:30.49 | kaze | doh |
| 21:31.35 | szsoftwa1e | BabelO: hmm, ok, thanks. But I think, this is not kernel related.. |
| 21:36.35 | goxboxlive | BabelO: well the ubuntu kernel didnt work either. Probably as you said that it had the network driver as a module |
| 21:37.29 | goxboxlive | #define PCI_DEVICE_ID_ATTANSIC_L1E 0x1026 |
| 21:37.42 | BabelO | goxboxlive: mail is on road :) |
| 21:37.49 | goxboxlive | great |
| 21:38.07 | cr2_ | BabelO: is something like that possible in GT ? http://wiki.openstreetmap.org/index.php/JOSM/Plugins/Lakewalker |
| 21:38.09 | cr2_ | hi goxboxlive |
| 21:39.24 | goxboxlive | hi cr2_ |
| 21:39.26 | goxboxlive | bbl |
| 21:39.49 | *** join/#htc-linux nebi (n=nebi@c-498fe253.02-145-7570701.cust.bredbandsbolaget.se) |
| 21:40.20 | BabelO | cr2_: why not, does it works well ? |
| 21:46.57 | cr2_ | lol |
| 21:47.03 | cr2_ | Exception.occured |
| 21:47.31 | goxboxlive | BabelO: well, the networkcard did work |
| 21:47.31 | cr2_ | hehe. |
| 21:47.33 | goxboxlive | but |
| 21:47.47 | goxboxlive | It didnt find the harddrives |
| 21:47.50 | cr2_ | that.is.why.i.like.java |
| 21:48.07 | BabelO | goxboxlive: lol, let me check :) |
| 21:48.09 | goxboxlive | i guess thats because i where using sata as AHCI no |
| 21:48.25 | goxboxlive | and it comlained about missmatch kernel version. |
| 21:48.45 | BabelO | goxboxlive: did you reactivate ide compatibility ? |
| 21:48.57 | *** join/#htc-linux romak (n=romario@89.185.235.7) |
| 21:49.01 | goxboxlive | i am about to do it now |
| 21:49.05 | BabelO | goxboxlive: i can built in it too that is fast to do know |
| 21:49.18 | goxboxlive | ok good |
| 21:49.29 | goxboxlive | then i can use my sata as ACHI? |
| 21:51.46 | BabelO | goxboxlive: i think yes if i select the good driver :) |
| 21:53.47 | BabelO | goxboxlive: i built in Intel ICH and JMICRON, dont know which one is the good |
| 21:53.48 | tmzt | szsoftwa1e: fbcon is built in to kernel |
| 21:55.37 | BabelO | goxboxlive: email |
| 21:57.39 | cr2_ | java.lang.OutOfMemoryError: Java heap space |
| 21:59.21 | BabelO | cr2_: this error message is made for you :) |
| 22:00.46 | goxboxlive | 1thx |
| 22:00.49 | BabelO | goxboxlive: stupid me , you need also scsi built in |
| 22:01.42 | goxboxlive | ok |
| 22:01.45 | goxboxlive | :-) |
| 22:02.28 | BabelO | goxboxlive: i think next one is the good one |
| 22:02.44 | goxboxlive | :-) |
| 22:04.46 | BabelO | goxboxlive: new email with sata and scsi in |
| 22:04.52 | goxboxlive | :-) thx |
| 22:05.02 | BabelO | goxboxlive: i name it SATA ... |
| 22:09.16 | tmzt | cr2_: "ibit irqs" does not seem to be affecting haretlog.txt, the commands are printed in the log but I get the same irq's |
| 22:10.23 | tmzt | cr2_: you also said to use addlist watch gpios , that command doesn't work |
| 22:15.59 | goxboxlive | BabelO: i got the partition application in debian installer so i thinks it's allright now. |
| 22:16.25 | goxboxlive | My GF just came back (been gone for a week) so i have to talk a little with her now. Anyway, thanks for your help |
| 22:16.27 | goxboxlive | night |
| 22:17.05 | *** join/#htc-linux exco (n=exco@e181081131.adsl.alicedsl.de) |
| 22:21.01 | *** join/#htc-linux LunohoD (n=alex@e180071091.adsl.alicedsl.de) |
| 22:22.50 | *** join/#htc-linux the_sys0p` (n=the_sys0@cpe-75-85-249-111.bak.res.rr.com) |
| 22:31.39 | BabelO | good night |
| 22:37.27 | *** join/#htc-linux kiersie (n=kiersie@ip56515cc2.adsl-surfen.hetnet.nl) |
| 22:52.22 | NetRipper | Kevin2, i was able to make the asm code to enable/disable the flashlight, to narrow down where it hangs... it hangs on the line "mcr p15, 0, r0, c1, c0, 0 @ disable the MMU & caches", before that instruction i can enable flashlight using virtual addresses, after that instruction i can't enable flashlight with either virtual or physical addressing |
| 22:54.16 | dcordes | NetRipper: on the raph? |
| 22:54.21 | NetRipper | yes |
| 22:54.38 | dcordes | nice |
| 22:54.43 | NetRipper | not nice :P |
| 22:55.30 | dcordes | szsoftwa1e: still around? |
| 23:06.28 | cr2_ | NetRipper: before it you use the virtual address ? which one ? |
| 23:07.33 | NetRipper | 0x92f00838 for bank2_in and 0x92f00804 for bank2_out |
| 23:19.13 | *** join/#htc-linux Arilou (n=DeluxeIR@79.101.86.51) |
| 23:21.52 | Kevin2 | NetRipper: Hrmm. What virtual and physical addresses are you using? |
| 23:22.12 | cr2_ | NetRipper: wince usually uses 0xb* |
| 23:22.17 | Kevin2 | What does "show cp(15, 0, 1, 0, 0)" report? |
| 23:22.25 | cr2_ | hi Kevin2 |
| 23:22.30 | Kevin2 | Hi cr2_ |
| 23:22.34 | cr2_ | Kevin2: i'll look what wince does |
| 23:22.46 | NetRipper | Kevin2, phys bank2_in 0xa9200838 bank2_out |
| 23:22.47 | NetRipper | Kevin2, phys bank2_in 0xa9200838 bank2_out netripper@eagle:~$ screen -x |
| 23:22.49 | NetRipper | oops |
| 23:23.10 | NetRipper | Kevin2, phys bank2_in 0xa9200838 bank2_out 0xa9200804, virt bank2_in 0x92f00838 bank2_out |
| 23:23.13 | NetRipper | Kevin2, phys bank2_in 0xa9200838 bank2_out 0xa9200804, virt bank2_in 0x92f00838 bank2_out You have mail in /var/mail/netripper |
| 23:23.16 | NetRipper | netripper@eagle:~$ screen -x |
| 23:23.19 | NetRipper | Kevin2, phys bank2_in 0xa9200838 bank2_out 0xa9200804, virt bank2_in 0x92f00838 bank2_out 0x92f00804 |
| 23:23.22 | NetRipper | arg |
| 23:23.25 | NetRipper | it's late.. |
| 23:23.29 | Arilou | cr2_ i tried your file treo750-linuxSD.exe, but it won't boot |
| 23:24.20 | NetRipper | Kevin2, result of that command: 0x0085387f |
| 23:24.59 | NetRipper | im looking at arm11 documentation |
| 23:26.11 | NetRipper | but should be correct to disable mmu bit and dcache |
| 23:26.21 | cr2_ | Arilou: *RD* |
| 23:26.38 | NetRipper | also icache is disabled, which is not required when disabling mmu |
| 23:27.55 | cr2_ | Arilou: both were working for one guy here. |
| 23:28.07 | Arilou | cr2_ are you sure ? i don't want to harm my ROM inside the phone |
| 23:32.52 | cr2_ | yes |
| 23:33.15 | cr2_ | it has nothing to do with ROM. as on all other phones |
| 23:37.52 | Kevin2 | NetRipper: Can you post the full log of the failed boot? |
| 23:38.18 | NetRipper | Kevin2, sure, give me a second |
| 23:41.27 | Kevin2 | NetRipper: I seem to vaguely recall reading that dzo had a problem turning off the mmu on his arm6 phone. He found some kind of a fix though. |
| 23:42.09 | NetRipper | Kevin2, http://www.netripper.nl/raphael/20081011_haretlog.txt |
| 23:42.45 | NetRipper | Kevin2, you referring to this: "It seemed to hang when I turned off the MMU so I rewrote the bootloader (haret) to set up some identity pages and boot with MMU on." |
| 23:42.54 | NetRipper | it's on the vogue site @ http://it029000.massey.ac.nz/vogue/ |
| 23:42.58 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbffb80.pool.einsundeins.de) |
| 23:43.46 | dzo | Hi, ignore that msm will boot with mmu off, but can't do i/o until it is on again. |
| 23:44.26 | dzo | so the vic and fb code must work before you will see anything |
| 23:44.29 | NetRipper | dzo, i/o including gpios? |
| 23:45.18 | dzo | yes, you are supposed to be able to use a remap reg to get it to work but it didn't for me. |
| 23:46.24 | dzo | my guess is the vic code is not correct, which are you using? |
| 23:46.53 | NetRipper | Kevin2, you should probably talk to dzo, im just a newb on asm and low level stuff |
| 23:47.20 | Kevin2 | Thanks dzo - NetRipper, it sounds like that would be the same problem you're seeing. If you can't change the flashlight gpio with mmu off, then you can't use that as a diagnostic aid. |
| 23:47.48 | NetRipper | Kevin2, indeed, in which case there is nothing i can use to diagnose, is there? |
| 23:48.25 | cr2_ | dzo: your VIC is different |
| 23:48.51 | NetRipper | dzo, can't we try booting with mmu on? you mention setting up identity pages, can you share your code changes? |
| 23:48.55 | dzo | yes, he should be using the android msm vic code |
| 23:49.14 | Kevin2 | vic == virtual interrupt controller? |
| 23:49.15 | *** join/#htc-linux DasFx (n=John@5354790B.cable.casema.nl) |
| 23:49.16 | NetRipper | i'm not familiar with VIC |
| 23:49.26 | cr2_ | hmm. i'll document the unknown address spaces controlled by arm9, but i'm not sure which one is gpio... |
| 23:49.46 | cr2_ | NetRipper: 7200 VIC is different from 7200A VIC |
| 23:50.16 | NetRipper | cr2_, i understand, but currently haret isn't doing anything with VIC, is it? only seen it in the kernel so far |
| 23:50.21 | cr2_ | Kevin2: V(?) InterruptController |
| 23:50.23 | dzo | booting with mmu on was not a good solution, I had to change the kernel a lot just to get to the point where the vic was enabled to find that was the problem and it never fully booted. |
| 23:51.13 | dzo | no there's nothing wrong with haret, it is jumping to the kernel but since it cant do any i/o you can't see it crashing. |
| 23:51.18 | NetRipper | dzo, so, newer releases of your vogue packages do disable the mmu? |
| 23:51.23 | dzo | yes |
| 23:51.26 | NetRipper | ok |
| 23:51.27 | cr2_ | dzo: i'll check if it's not legitimate to use gpio in phys mode. |
| 23:52.13 | Kevin2 | Does irq initialization happen after the mmu is turned on in linux? Maybe try enabling the flashlight as soon as the mmu is brought up? |
| 23:52.14 | NetRipper | dzo, and the remap reg to get gpio's to work, do you still have an example of that? perhaps it works on 7x00A |
| 23:52.15 | dzo | you should be able to use the peripheral port remap register but i had no luck (check the arm docs) |
| 23:52.21 | NetRipper | ok |
| 23:52.23 | NetRipper | sniffs |
| 23:52.48 | dzo | got to go now, bye... |
| 23:52.56 | cr2_ | dzo: hmm. on diamond it's completely impossible to debug anything then |
| 23:53.18 | NetRipper | dzo, thx for the info, byes |
| 23:53.52 | dzo | the mmu is not off for long so play with the vic code. |
| 23:58.38 | Kevin2 | NetRipper: Can you run "show cp(15, 0, 15, 0, 0)" and "show cp(15, 0, 15, 0, 1)" and "show cp(15, 0, 15, 0, 2)" and "show cp(15, 0, 15, 0, 4)" |
| 23:58.59 | NetRipper | Kevin2, give me a sec |