| 00:00.08 | maejrep[w] | lavender-t: either kernel panic (not unlikely), or something else about the fb not working |
| 00:00.15 | maejrep[w] | lavender-t: compile with HTC_FB_CONSOLE_BOOT=n |
| 00:00.19 | maejrep[w] | and see if that helps any |
| 00:00.24 | maejrep[w] | cr2: yes |
| 00:00.27 | cr2 | ok |
| 00:00.30 | maejrep[w] | according to spl "display 2" |
| 00:00.36 | NetRipper | lavender-t, you pulled the latest kernel from git? |
| 00:01.03 | lavender-t | not yet ... i checked out the one a couple days ago |
| 00:01.11 | NetRipper | the .27 is in git now |
| 00:01.15 | maejrep[w] | that one didn't have any support yet :) |
| 00:01.18 | maejrep[w] | that was just a copy of .27 from google |
| 00:01.22 | lavender-t | then applied maejreps diffs |
| 00:01.27 | maejrep[w] | oh |
| 00:01.34 | maejrep[w] | then that might be because of a raph800 difference |
| 00:01.36 | cr2 | maejrep[w]: the ids are consistent with raph100. that's why they do double translation |
| 00:01.49 | maejrep[w] | oh really? |
| 00:01.55 | NetRipper | which device did you have lavender? |
| 00:02.04 | cr2 | The following code applies to the RAPH100 _only_ ! |
| 00:02.06 | cr2 | Hitachi (5), Sharp(0xa) or Toppoly(2,0x11). |
| 00:02.18 | lavender-t | diam110 |
| 00:02.35 | NetRipper | lavender-t, maejrep's patches don't include diamond |
| 00:02.38 | cr2 | raph800 has hitachi(5), sharp(0xa) and toppoly(2) |
| 00:02.55 | NetRipper | lavender-t clean your git and pull the latest |
| 00:03.01 | lavender-t | yeah i know. i already changed some code to make diam boot |
| 00:03.15 | NetRipper | panels are defined in the board files now |
| 00:03.29 | NetRipper | so possibly it's not inited correctly if you havent copied the raphael boardfile |
| 00:04.00 | NetRipper | wait, im wrong there |
| 00:04.00 | lavender-t | yeah i guess so. i found maejrep's ripped out the mddi0_device |
| 00:04.19 | NetRipper | ah |
| 00:04.19 | NetRipper | see |
| 00:04.19 | NetRipper | ok |
| 00:04.19 | NetRipper | :) |
| 00:04.23 | maejrep[w] | lavender-t: it wasn't me ;) |
| 00:04.24 | maejrep[w] | google did it |
| 00:04.27 | maejrep[w] | i just followed suit |
| 00:04.35 | lavender-t | oh :) ok |
| 00:04.52 | cr2 | maejrep[w]: but the strange thing is that raph100 doesn't send the spi init values (or i've overlooked them) |
| 00:05.02 | lavender-t | so the 2nd stage console worked fine in raph ? |
| 00:05.41 | NetRipper | lavender-t, the board-diamond must use the board-htcraphael-panel as well.. there the panels are defined.. it's a change |
| 00:05.55 | lavender-t | oic |
| 00:06.03 | lavender-t | will give it a try. |
| 00:06.05 | NetRipper | lavender-t, please just try the latest .27 in git |
| 00:06.11 | NetRipper | would be a good test as well |
| 00:06.14 | NetRipper | :) |
| 00:06.15 | lavender-t | alright netripper |
| 00:06.18 | cr2 | NetRipper: .27 is in git ? |
| 00:06.21 | NetRipper | cr2, yes |
| 00:06.24 | lavender-t | thanks much :) |
| 00:06.27 | cr2 | then i may compile it |
| 00:06.32 | cr2 | link ? |
| 00:06.34 | NetRipper | http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=shortlog;h=refs/heads/htc-msm-2.6.27 |
| 00:06.43 | cr2 | patch time :) |
| 00:06.55 | NetRipper | cr2, it's ported from .25 |
| 00:07.02 | NetRipper | mostly by maejrep |
| 00:08.01 | cr2 | ok |
| 00:08.09 | cr2 | but not today probably |
| 00:08.24 | NetRipper | what not today? |
| 00:08.28 | NetRipper | your compiling? |
| 00:08.28 | NetRipper | :P |
| 00:08.33 | cr2 | yes |
| 00:08.43 | cr2 | andpatchez |
| 00:09.55 | *** join/#htc-linux konsta (n=asds@host81-154-247-76.range81-154.btcentralplus.com) |
| 00:09.58 | NetRipper | maejrep[w], another thingy i saw.. in the mddi_client_epson.. i see you applied the width=480 and height=640 stuff.. you may want to set xres and yrex accordingly as well... some struct mentions the 'width' and 'height' are in mm, while xres/yres are pixels |
| 00:10.31 | cr2 | do you need to hardcode that ? |
| 00:10.42 | NetRipper | well i think it was still needed yes |
| 00:10.43 | cr2 | i thought one can pick it from the panel ? |
| 00:10.47 | NetRipper | yes you should |
| 00:10.55 | NetRipper | but it's still in maejreps code, so i assume it didnt work |
| 00:10.55 | cr2 | unless you want to support multiple resolutions |
| 00:11.26 | NetRipper | cr2, in the .25 tree, the raph800/diam800/touch hd panels return 848x848 resolution, not the proper |
| 00:11.45 | NetRipper | which is why it was fixed that way |
| 00:11.55 | cr2 | NetRipper: then something is done wrong |
| 00:12.09 | NetRipper | obviously |
| 00:12.10 | NetRipper | :) |
| 00:12.18 | cr2 | NetRipper: btw, the clocks on different devices are diffrent |
| 00:12.32 | cr2 | from a19, to 0xa2c to 0xa41 |
| 00:12.45 | NetRipper | which clocks? |
| 00:12.50 | cr2 | 8c |
| 00:12.56 | cr2 | pmdh_clk |
| 00:13.16 | cr2 | which you don't set. lol |
| 00:13.31 | cr2 | because the clk api does not support it yet |
| 00:13.43 | NetRipper | indeed |
| 00:13.50 | NetRipper | so it'll stay at wince speed |
| 00:13.52 | NetRipper | should be ok |
| 00:13.52 | NetRipper | ;) |
| 00:13.59 | NetRipper | for now |
| 00:14.12 | cr2 | ok |
| 00:15.51 | cr2 | [00:34] <NetRipper> cr2, from wiki: cc,20,02,00 - lcd poweron related |
| 00:16.16 | cr2 | it's cc,20,29,0 on raph800 |
| 00:17.13 | cr2 | maejrep[w]: looks like a write into 0x20 reg of the arg2 value. |
| 00:17.35 | maejrep[w] | what? |
| 00:18.05 | cr2 | lcd powron related: cc,20,02,00 on raph100; cc,20,29,0 on raph800 |
| 00:19.52 | cr2 | maejrep[w]: it still does toshiba init, even if you have epson. weird |
| 00:20.47 | cr2 | maybe this data just does into nowhere |
| 00:20.49 | maejrep[w] | are you talking about -panel.c ? |
| 00:20.57 | cr2 | no, the spl |
| 00:21.21 | cr2 | but the code is still inconsistent |
| 00:21.46 | cr2 | sometimes the toshiba parts are coded around |
| 00:22.00 | cr2 | maybe it's just buggy spl ;) |
| 00:22.49 | cr2 | aha |
| 00:23.13 | cr2 | the epson code includes the hitachi lcm message |
| 00:23.17 | cr2 | unconditionally |
| 00:24.02 | cr2 | and the cc,20,29,0 is just behind the "powerup hitachi lcm" |
| 00:25.28 | maejrep[w] | so epson == hitachi? |
| 00:25.38 | cr2 | looks like that |
| 00:25.42 | maejrep[w] | maybe one is physical panel, the other is controller/mddi client? |
| 00:25.55 | cr2 | don't think so |
| 00:25.58 | maejrep[w] | too confusing |
| 00:26.03 | cr2 | but the code looks strange. |
| 00:26.16 | cr2 | do you have disputils.dll ? |
| 00:26.29 | cr2 | the wince code is usually more clean than the spl |
| 00:26.43 | cr2 | although the spl is more simple |
| 00:27.49 | cr2 | yeah, looks like buggy code |
| 00:28.00 | cr2 | the epson has its own spi lcd init |
| 00:28.15 | cr2 | aah, |
| 00:28.21 | cr2 | the regs 108 and 110 |
| 00:29.07 | maejrep[w] | i'm pretty sure I'm not following ;x |
| 00:29.27 | cr2 | maejrep[w]: add the 108 and 110 regs to epson as spi-related. i forgot my password |
| 00:30.15 | cr2 | http://wiki.xda-developers.com/index.php?pagename=RaphaelMDDI |
| 00:30.18 | cr2 | here at the bottom |
| 00:31.01 | cr2 | 108 is SPI_TX probably |
| 00:31.23 | cr2 | or maybe i'm wrong |
| 00:31.44 | cr2 | but it's unlikely |
| 00:32.29 | maejrep[w] | would it be possible to read/write these addresses from userland? |
| 00:32.37 | maejrep[w] | like doing the same thing as readl() and writel() ? |
| 00:32.40 | cr2 | yes |
| 00:32.56 | cr2 | you may try to trace them, while doing 'setlcd' |
| 00:33.02 | maejrep[w] | so I can just write a program that does *(0xf00) = bar |
| 00:33.09 | cr2 | and the i2c wcc,20,29,9 bt |
| 00:33.23 | maejrep[w] | ok, I didn't see anything on mddi_base with setlcd |
| 00:33.42 | cr2 | yes, but not so brutal :) |
| 00:33.42 | maejrep[w] | brutal?! |
| 00:33.49 | cr2 | the function is |
| 00:33.59 | cr2 | 110=10 |
| 00:34.02 | cr2 | 108=r0 |
| 00:34.06 | cr2 | msleep 1 |
| 00:34.12 | cr2 | 110=12 |
| 00:34.21 | cr2 | 108=r1 |
| 00:34.31 | cr2 | and that for a lot of pairs r0,r1 |
| 00:35.05 | cr2 | that's why i think 108 is TX |
| 00:35.05 | maejrep[w] | so a SetRegAAndRegB( a, b ) func? |
| 00:35.06 | maejrep[w] | :) |
| 00:35.14 | cr2 | yes |
| 00:35.26 | cr2 | i think it's the same for toshiba |
| 00:35.33 | cr2 | you can check the source |
| 00:35.46 | cr2 | but toshiba has the spi regs at 1200xxx |
| 00:36.48 | cr2 | there is also reg 168 |
| 00:37.04 | cr2 | used by sharp lcd |
| 00:39.03 | cr2 | and on toppoly it's just a sequential write to reg 108 |
| 00:39.30 | cr2 | maejrep[w]: imho these regs are accessed over mddi |
| 00:39.41 | cr2 | don't know why do you say they are mmaped |
| 00:40.51 | cr2 | yeah, from the global structure it looks like th buggy code |
| 00:41.07 | cr2 | when toshiba and epson overlap |
| 00:42.10 | cr2 | or maybe it's something evil |
| 00:44.18 | cr2 | maejrep[w]: you can try to trace it, or look at the disputils.dll |
| 00:44.59 | *** part/#htc-linux stadicon (n=liberost@79.107.28.155) |
| 00:46.22 | cr2 | maejrep[w]: have you tried to read the 0x0 and 0x4 epson regs ? |
| 00:46.28 | maejrep[w] | well, is it a remote_write, or mddi_write ? |
| 00:46.39 | cr2 | remote |
| 00:46.44 | maejrep[w] | I tried 0x300 and 0x308 and 0x324 (iirc) |
| 00:46.49 | cr2 | mddi is local |
| 00:47.05 | maejrep[w] | but the only way i could get it to not screw up my panel was to comment out a lot of stuff from the toshiba init |
| 00:47.21 | cr2 | imho you don't need toshiba init |
| 00:47.34 | cr2 | but the raph800 mixes them too |
| 00:47.41 | cr2 | i don't undertsand why |
| 00:47.57 | maejrep[w] | I really don't know the best way to test it either |
| 00:48.01 | cr2 | from the avsailable descriptions these are completely complementary chips |
| 00:48.06 | maejrep[w] | other than writing it into -panel.c, and boot to see what happens |
| 00:48.24 | cr2 | mmutrace the mddi ? |
| 00:48.30 | maejrep[w] | but then I don't know if it would be reinitializing, or just using the wince already-initialized panel |
| 00:48.34 | maejrep[w] | oh |
| 00:48.40 | *** join/#htc-linux Zinbolic (n=chatzill@84.238.80.215) |
| 00:48.40 | maejrep[w] | well i think i tried that |
| 00:48.42 | maejrep[w] | and didn't have much luck |
| 00:48.47 | cr2 | which doing 'setlcd' to on/off it |
| 00:48.52 | cr2 | ok |
| 00:48.53 | maejrep[w] | would be nice to have rndis-host on osx :p |
| 00:49.02 | maejrep[w] | yeah, mmutrace with setlcd |
| 00:49.13 | maejrep[w] | but i might not have been looking at the right addresses either |
| 01:00.07 | *** join/#htc-linux apt (i=ibot@rikers.org) |
| 01:00.07 | *** topic/#htc-linux is HTC Linux Channel: Find logs at http://apt.rikers.org/%23htc-linux/ | please check http://handhelds.org/moin/moin.cgi/HTC_2dPhones | http://wiki.xda-developers.com/index.php?pagename=Xanadux | <cr2> let's define a common setup. |
| 01:04.04 | dcordes_ | maejrep[w]: sd doesn't work either in the git .27 : command timeout |
| 01:04.28 | lavender-t | netripper, the head of .27 git boots fine in my diam110 without any modification |
| 01:05.07 | NetRipper | dcordes_, i also get command timeout 3 or 4 times, but then it works fine after that.. if you get more than 3-4 timeouts.. you probably need to change msmsdcc_id kernel parameter |
| 01:05.16 | NetRipper | dcordes_, which mtype are you using |
| 01:05.16 | dcordes_ | ok |
| 01:05.21 | dcordes_ | raph100 |
| 01:05.38 | NetRipper | and on which SDC is your sd card? |
| 01:06.06 | dcordes_ | kovsky sd is 3 |
| 01:06.14 | *** join/#htc-linux seand (n=sean@adsl-69-232-201-43.dsl.pltn13.pacbell.net) |
| 01:06.15 | NetRipper | ok |
| 01:06.21 | NetRipper | put msmsdcc_id=3 in kernel |
| 01:06.25 | NetRipper | as cmdline param |
| 01:06.26 | NetRipper | i mean |
| 01:07.38 | *** join/#htc-linux Othello (i=Othello@gateway/tor/session) |
| 01:07.42 | NetRipper | lavender-t, ok great, thx :) |
| 01:08.54 | *** join/#htc-linux Balsat (n=kll@87.72.13.87) |
| 01:08.57 | NetRipper | lavender-t, if you feel like hacking, there's a problem when starting android.. a lot of msmfb_pan_update timeout's happen.. making android unusable.. ;) |
| 01:09.28 | NetRipper | lavender-t, oh you were an X user right, let me know if X is working just fine ;) |
| 01:09.42 | NetRipper | maybe it's specific to the way android does things |
| 01:10.47 | *** part/#htc-linux Balsat (n=kll@87.72.13.87) |
| 01:11.00 | lavender-t | netripper: yeah i'm seeing that now ... :) no wonder ... |
| 01:11.31 | NetRipper | dcordes_, regarding the hang.. im a bit out of ideas.. what you could do is stub proc_comm_wince (return 0) and clk_set_rate (return 0).. see if that fixes anything |
| 01:11.46 | NetRipper | clk_set_rate in the clock-wince.c file |
| 01:12.15 | NetRipper | disabling proc_comm also disables vreg stuff, which may also be a cause of headache for your device still |
| 01:12.37 | NetRipper | lavender-t, so same annoying behaviour in X? |
| 01:13.02 | NetRipper | [ 211.690332] msmfb_pan_display timeout waiting for frame start, 39866 39866 |
| 01:13.03 | NetRipper | etc |
| 01:13.37 | NetRipper | it's past my bedtime already ;) |
| 01:13.38 | NetRipper | gtg :) |
| 01:13.40 | NetRipper | night |
| 01:18.56 | lavender-t | good night netripper. |
| 01:21.13 | *** join/#htc-linux pzztgotbagz (n=pzztgotb@c-76-30-250-117.hsd1.tx.comcast.net) |
| 01:21.15 | pzztgotbagz | howdy folks |
| 01:23.54 | *** join/#htc-linux nato2k (n=templarn@adsl-76-205-128-145.dsl.frs2ca.sbcglobal.net) |
| 01:27.18 | *** join/#htc-linux zycho (n=zycho@a89-182-220-85.net-htp.de) |
| 01:40.43 | *** join/#htc-linux mdrobnak (n=mdrobnak@pool-96-232-187-37.nycmny.fios.verizon.net) |
| 01:43.33 | mdrobnak | Hey everyone |
| 02:19.26 | *** join/#htc-linux utter0029 (n=dk@92.12.9.180) |
| 03:20.30 | *** join/#htc-linux heyman (i=bite@gateway/tor/session) |
| 03:31.39 | *** join/#htc-linux holycow (i=bite@gateway/tor/session) |
| 03:37.30 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbf8b04.pool.einsundeins.de) |
| 04:00.08 | *** join/#htc-linux paulproteus (n=paulprot@2002:db69:2513:0:0:0:0:1) |
| 04:15.57 | *** join/#htc-linux AstainHellbring (n=AstainHe@unaffiliated/astainhellbring) |
| 04:27.51 | *** join/#htc-linux nato2k (n=templarn@76.205.128.145) |
| 05:21.26 | maejrep | so, keyboard backlight is (at least on raph800) definitely controlled by i2c, not gpio |
| 05:22.15 | tmzt | hey maejrep, why is diamond a seperate board? |
| 05:22.23 | maejrep | i dunno |
| 05:23.01 | tmzt | does it work for lavender-t? |
| 05:25.16 | *** join/#htc-linux the_sys0p (n=the_sys0@cpe-67-49-210-229.bak.res.rr.com) |
| 05:34.33 | *** join/#htc-linux goxboxlive (n=goxboxli@mail2.hjellnesconsult.no) |
| 05:50.32 | *** join/#htc-linux PoohbaLT (n=Poohba@c-98-235-66-242.hsd1.nj.comcast.net) |
| 05:52.41 | maejrep | cr2: nledset 1 1 <-- turns on vibra o.0 |
| 06:37.24 | *** join/#htc-linux Magorium (i=Othello@gateway/tor/session) |
| 06:45.27 | *** join/#htc-linux rmoravcik1 (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 06:47.00 | *** join/#htc-linux Kuma (n=John@f048236240.adsl.alicedsl.de) |
| 06:50.02 | maejrep | cr2: nothing else seemed to work btw |
| 06:51.47 | *** join/#htc-linux Balsat (n=kll@87.72.13.87) |
| 06:59.40 | Balsat | Morning |
| 07:00.14 | Balsat | Lavender.t: Have you been looking at the "msmfb_pan_update timeout's" |
| 07:01.19 | maejrep | cr2: also redefined ce,13,xx on wiki |
| 07:01.26 | maejrep | it controls keyboard LEDs |
| 07:01.51 | maejrep | ce,13,12 = CAPS, ce,13,14 = Fn, ce,13,10 = both, ce,13,16 = off |
| 07:03.13 | *** join/#htc-linux pleemans (n=toi@116.54-246-81.adsl-static.isp.belgacom.be) |
| 07:14.11 | *** join/#htc-linux kiozen (n=oeichler@p549220FC.dip0.t-ipconnect.de) |
| 07:17.27 | *** join/#htc-linux danny123 (n=danny123@89.146.26.66) |
| 07:20.15 | *** join/#htc-linux nebi (n=nebi@170.ftth2.cust.fyrobs1.upps.se.borderlight.net) |
| 07:37.48 | *** join/#htc-linux Magorium (i=Othello@gateway/tor/session) |
| 08:00.13 | *** join/#htc-linux TheEnforcer (n=kvirc@p549927C8.dip0.t-ipconnect.de) |
| 08:07.31 | *** join/#htc-linux ewasx (n=Armin@armin-dev.ict.tno.nl) |
| 08:11.48 | *** join/#htc-linux Zinbolic (n=chatzill@84.238.80.215) |
| 08:14.00 | *** join/#htc-linux kiozen (n=oeichler@p549220FC.dip0.t-ipconnect.de) |
| 08:16.40 | *** join/#htc-linux kiozen (n=oeichler@p549220FC.dip0.t-ipconnect.de) |
| 08:16.56 | *** join/#htc-linux BabelO_ (n=fcr@unaffiliated/babelo) |
| 08:17.46 | *** join/#htc-linux rmoravcik (n=rmoravci@gtsgw.ttc.cz) |
| 08:22.07 | *** join/#htc-linux Sti_0231 (n=Where_is@224.202-65-87.adsl-dyn.isp.belgacom.be) |
| 08:23.43 | *** join/#htc-linux holycow (i=bite@gateway/tor/session) |
| 09:11.27 | *** join/#htc-linux ChanServ (ChanServ@services.) |
| 09:11.27 | *** join/#htc-linux BabelO_ (n=fcr@unaffiliated/babelo) [NETSPLIT VICTIM] |
| 09:11.27 | *** join/#htc-linux Skitzo (n=DCLXVI@eth582.vic.adsl.internode.on.net) [NETSPLIT VICTIM] |
| 09:11.27 | *** join/#htc-linux tcccp (i=hey@ballbreaker.hey-ix.net) [NETSPLIT VICTIM] |
| 09:11.27 | *** join/#htc-linux woodyPL (n=woody@gateway/shell/blinkenshell.org/x-1f097ac9de48f2cd) [NETSPLIT VICTIM] |
| 09:11.27 | *** mode/#htc-linux [+o ChanServ] by irc.freenode.net |
| 09:13.48 | *** join/#htc-linux ALoGeNo (n=alogeno@185.Red-88-23-201.staticIP.rima-tde.net) |
| 09:15.08 | *** join/#htc-linux radem205 (n=aaa@92-108-47-154.dynamic.upc.nl) |
| 09:25.57 | *** join/#htc-linux DasFx (n=John@dasfx-lptp.euronet.nl) |
| 09:37.02 | *** join/#htc-linux the_sys0p (n=the_sys0@cpe-67-49-210-229.bak.res.rr.com) |
| 09:42.23 | *** join/#htc-linux Magorium (i=Othello@gateway/tor/session) |
| 09:48.19 | _workkaze | 10:41AM up 84 days, 16:36, 2 users, load averages: 0.04, 0.02, 0.00 |
| 09:48.26 | _workkaze | FreeBSD hydric.dbp-aquitaine.net 6.4-PRERELEASE FreeBSD 6.4-PRERELEASE #0: Wed Oct 29 11:26:14 CET 2008 kaze@hydric.dbp-aquitaine.net:/mnt/dd2/obj/mnt/dd2/src/sys/GENERIC i386 |
| 09:48.30 | _workkaze | oops |
| 09:50.09 | *** join/#htc-linux holycow (i=bite@gateway/tor/session) |
| 09:55.09 | *** join/#htc-linux rmoravcik (n=rmoravci@gtsgw.ttc.cz) |
| 10:01.01 | *** join/#htc-linux Othello (i=Othello@gateway/tor/session) |
| 10:05.18 | NetRipper | maejrep[w], so also for raph800 the keyboard backlight is via i2c? as on wiki a gpio is documented |
| 10:05.47 | NetRipper | maejrep[w], and how about the stylus, maybe that is also doable via i2c? |
| 10:15.11 | *** join/#htc-linux sut2 (n=su@port-83-236-239-237.static.qsc.de) |
| 10:26.21 | *** join/#htc-linux stefan_schmidt (n=stefan@c120.apm.etc.tu-bs.de) |
| 10:34.34 | *** join/#htc-linux timebomb (n=tb@p5B3E58F5.dip.t-dialin.net) |
| 10:37.14 | *** join/#htc-linux JeckyllHavok (n=cytech_x@versatel096.btnet.de) |
| 10:38.00 | JeckyllHavok | Good day everyone, nice to see so mouch known members of XDA-Dev |
| 10:41.40 | *** join/#htc-linux holycow (i=bite@gateway/tor/session) |
| 11:22.01 | *** join/#htc-linux TripleQ (n=joost@ip49-198-173-82.adsl2.static.versatel.nl) |
| 11:24.27 | *** join/#htc-linux Czarnas (n=czarnas@imik.wip.pw.edu.pl) |
| 11:25.38 | *** join/#htc-linux dwaradzyn (n=chatzill@host40-58.lerkins.com) |
| 11:26.09 | dwaradzyn | cr2: \windows\*.cvs from blackstone: http://rapidshare.com/files/187589408/blackstone_windows_csv.zip |
| 11:41.28 | *** join/#htc-linux tsdogs (n=tsdogs@net70-17.metalit.net) |
| 11:45.05 | *** join/#htc-linux Zinbolic (n=chatzill@84.238.80.215) |
| 11:49.49 | *** join/#htc-linux NeoS2007 (n=neos2007@82-136-223-208.ip.telfort.nl) |
| 11:50.08 | NeoS2007 | hey guys |
| 11:55.28 | NeoS2007 | i'm a noob to android, so here's a question: what file extension should the zImage have? |
| 11:59.27 | tsdogs | NeoS2007: does not matter afaik, the bootloader needs to know it's name |
| 12:04.36 | *** join/#htc-linux ionstorm (n=ion@ip68-227-226-5.ph.ph.cox.net) |
| 12:06.14 | NeoS2007 | k, thx. |
| 12:07.04 | NeoS2007 | I managed to boot android 0.8 on my HD but got messed up text and that was about it. Android 1.0 doesn't boot whatsoever. |
| 12:07.38 | dcordes_ | that is a known problem |
| 12:12.21 | NeoS2007 | that 1.0 won't boot? |
| 12:14.47 | dcordes_ | that's not relevant until the screen is fixed |
| 12:18.03 | NeoS2007 | How come the X1 doesn't have this issue? It's the same wvga rez, right? |
| 12:18.57 | dcordes_ | different mddi |
| 12:20.28 | NeoS2007 | ah. So that needs to be bypassed first? |
| 12:21.08 | dcordes_ | no clue what it needs tbh |
| 12:21.48 | *** join/#htc-linux Untouchab1e (n=Untoucha@82.147.51.146) |
| 12:21.53 | Untouchab1e | good afternoon ^^ |
| 12:22.16 | dcordes_ | good mornign :D |
| 12:22.54 | Untouchab1e | hehe |
| 12:22.57 | Untouchab1e | how are you? |
| 12:24.16 | dcordes_ | I'm fine, you? |
| 12:25.07 | dcordes_ | ..except for x1 not booting with the htc-msm-2.6.27 |
| 12:27.04 | NetRipper | dcordes_, still the hang? |
| 12:27.48 | Untouchab1e | heh, working on the SE Xperia? |
| 12:27.53 | NetRipper | dcordes_, did you try disabling proc_comm and clock api? |
| 12:29.04 | dcordes_ | Untouchab1e: yep |
| 12:29.24 | dcordes_ | NetRipper: no, went to sleep before I saw it |
| 12:29.33 | NetRipper | dcordes_, ok |
| 12:29.40 | Untouchab1e | How is it going? Havent read up on the Xperia development |
| 12:29.57 | dcordes_ | in your description I noticed there was quite a lot of stuff added/changed from patch->git |
| 12:30.04 | NetRipper | dcordes_, indeed |
| 12:31.19 | NetRipper | some changes were neccesary to make it build on .27 and besides that, the major things are the new drivers and CDMA device support |
| 12:31.26 | Untouchab1e | Anyone here experienced that the Android Emulator wont boot into Android, but just get stuck on the loading? |
| 12:31.57 | dcordes_ | sorry no clue about that |
| 12:32.28 | dcordes_ | NetRipper: but the patch does build too with .27 ? |
| 12:33.06 | NetRipper | what is in git now, builds |
| 12:33.49 | dcordes_ | yea and the patch builds too :) |
| 12:33.52 | NetRipper | maejrep's patch also built when applied to bare .27 |
| 12:34.12 | dcordes_ | so how can the changes to the git code be necessary to be able to build? |
| 12:34.47 | dcordes_ | I will try building git without SD |
| 12:35.05 | NetRipper | maejrep's patch already included changes (which are also included in the desciption in the git).. and it was only geared towards raphael, and gpio's were changed as meajrep has a cdma device... so i made it compatible with 4 device types |
| 12:36.12 | dcordes_ | nevermind |
| 12:36.33 | *** join/#htc-linux yoyey (n=yoann@bro69-3-82-237-160-83.fbx.proxad.net) |
| 12:37.17 | NetRipper | it's easy.. what is currently in git. is maejrep's patch + a little bit cleaned up (i.e. changes that only involved printk's) + compatibility with raph100/diam100/raph800/diam800 |
| 12:37.51 | dcordes_ | all good |
| 12:39.11 | dcordes_ | NetRipper: is one supposed to build all 4 machine types? |
| 12:39.54 | NetRipper | the htcraphael_defconfig includes all 4 machine types |
| 12:40.00 | NetRipper | but you can disable one of course |
| 12:40.13 | NetRipper | i removed htcdiamond_defconfig as it didn't differ from raphael, besides the mach types |
| 12:40.17 | NetRipper | it was pointless |
| 12:41.27 | *** join/#htc-linux pichurri (n=pichurri@users3.ilo.org) |
| 12:42.04 | dcordes_ | oouh microp_keypad_init caused an oops it looks |
| 12:44.49 | *** join/#htc-linux stamppot (i=d4cb1b12@gateway/web/ajax/mibbit.com/session) |
| 12:45.15 | Untouchab1e | Hi NetRipper.. anything on the Raph? :) |
| 12:53.30 | *** part/#htc-linux yoyey (n=yoann@bro69-3-82-237-160-83.fbx.proxad.net) |
| 12:57.58 | dcordes_ | NetRipper: ok it's mmc causing the pwrsink freeze |
| 13:01.13 | j0b0 | dcordes_ if you use the microp-keypad driver builtin, not as module, you have to remove some code from the probe function that calls the i2c chip functions, or it will crash on boot |
| 13:01.26 | j0b0 | _set_ksc_notofications() and _read_scancode() |
| 13:01.28 | dcordes_ | ok had it built in |
| 13:01.39 | j0b0 | either that or test inside those functions whether the driver has yet been inited |
| 13:02.14 | dcordes_ | can we get something in the kernel that adds that automatically when using monolithic kernel? |
| 13:02.47 | j0b0 | around line 350/360 and around line 390/400 |
| 13:03.50 | j0b0 | it would probably be good to test anyway, that way it will work whether its a module or builtin |
| 13:04.21 | dcordes_ | ok |
| 13:06.39 | dcordes_ | j0b0: which file? microp-ksc.c has 297 lines |
| 13:07.20 | j0b0 | microp-keypad.c in input/keyboard/ |
| 13:07.26 | dcordes_ | ok |
| 13:08.07 | j0b0 | where it says: just to be sure the buffer is clean and if (clamshell gpio > 0) {} else {} |
| 13:08.59 | j0b0 | it is the keyboard driver calling the i2c chip driver before it is inited |
| 13:09.03 | *** join/#htc-linux AstainHellbring (n=AstainHe@unaffiliated/astainhellbring) |
| 13:09.21 | dcordes_ | j0b0: can't see just to be sure line |
| 13:09.53 | j0b0 | microp-keypad.c:351 |
| 13:10.20 | dcordes_ | that's ".resume = microp_keypad_resume,C" here |
| 13:10.32 | dcordes_ | I'm using the htc-msm-2.6.27 code |
| 13:11.29 | j0b0 | ok, im using maejreps very original code |
| 13:12.06 | dcordes_ | from the .27 patch or older? |
| 13:12.12 | *** part/#htc-linux rmoravcik (n=rmoravci@gtsgw.ttc.cz) |
| 13:12.53 | j0b0 | anyway .. the probe function calls micropksc_read_scancode() and micropklt_set_ksc_notofications() .. i had to remove that in order for it to not crash on boot |
| 13:13.24 | dcordes_ | can you paste that? |
| 13:13.37 | j0b0 | older. the very first attempt i think |
| 13:14.59 | j0b0 | ahh .. the line numbers are wrong because i inserted the raph100 keymap.. |
| 13:16.27 | dcordes_ | gitweb is slow again. here's the current git one http://privatepaste.com/980I9gIe1l |
| 13:18.35 | j0b0 | ok, i see the read-scancode call is already gone. lines 300 and 302 in your paste call the led chip driver |
| 13:20.36 | dcordes_ | j0b0: I'm trying without them |
| 13:20.38 | Untouchab1e | The Android emulator just wont work on my Laptop.. lol |
| 13:21.49 | j0b0 | a nicer check would be like in line 32 and 42/43 of http://privatepaste.com/81UhYZfLPG |
| 13:22.11 | j0b0 | then it will still do the led thing on module load if the i2c chip driver is there |
| 13:22.47 | dcordes_ | leds don't work for me. I'm using the kovsky (x1) |
| 13:23.06 | dcordes_ | well :) keys don't either |
| 13:23.06 | j0b0 | ok |
| 13:23.14 | dcordes_ | but the ts works |
| 13:23.33 | dcordes_ | does it make any sense then? |
| 13:23.58 | *** join/#htc-linux radem205 (n=aaa@e144118.upc-e.chello.nl) |
| 13:24.19 | j0b0 | and the frame buffer? :P |
| 13:25.42 | dcordes_ | j0b0: works but has the colour problem |
| 13:25.52 | *** join/#htc-linux kso512 (n=kso@cpe-24-28-76-30.austin.res.rr.com) |
| 13:27.11 | j0b0 | same as raph/diam800, right, not scrambled up like blackstone |
| 13:27.39 | *** join/#htc-linux danny123 (n=danny123@89.146.26.66) |
| 13:28.25 | dcordes_ | yep, no scramble. just the colour confusion. |
| 13:34.11 | j0b0 | that one is weird .. almost makes me sad i dont have that problem :| |
| 13:34.43 | dcordes_ | wasn't it fixed on the cdma raphs/diams yet? |
| 13:36.06 | j0b0 | not afaik .. recently? |
| 13:36.28 | dcordes_ | I don't know. it was merely a question |
| 13:37.01 | dcordes_ | with the led chip driver call removed I get the same hang |
| 13:38.33 | j0b0 | if you tell msm_fb that it is in rgb444 mode, its internal functions will honor that, and console and X look normal, but the android renderer assumes and draws 565 |
| 13:38.50 | j0b0 | oh, so its not a crash? |
| 13:39.26 | j0b0 | when i first tried it builtin it crashed and i could tell from the backtrace that this was the culprit |
| 13:41.01 | dcordes_ | j0b0: what's the difference between hang and crash? crash is a panic and outputs errors? |
| 13:43.21 | j0b0 | a hang is a situation like an unbreakable loop or deadlock, that is technically not wrong, but also not what you wanted. a crash is when you touch unallocated memory, or do something else that throws an exception you dont handle |
| 13:44.31 | dcordes_ | ok thanks |
| 13:44.38 | j0b0 | the latter is what I got when i first compiled that driver into the kernel, and it gave me a panic log and stack backtrace |
| 13:45.16 | dcordes_ | I think sometimes it shows the panic, sometimes it doesn't but the problem remains the same |
| 13:45.17 | j0b0 | if you dont see any crash output, maybe its there but never got dma'd to the lcd panel |
| 13:45.24 | dcordes_ | because it always boots without the i2c |
| 13:45.42 | *** join/#htc-linux mib_aft9l7 (i=58b1d227@gateway/web/ajax/mibbit.com/session) |
| 13:46.49 | dcordes_ | that |
| 13:48.55 | *** join/#htc-linux techie (n=blarg@ip24-250-216-85.ga.at.cox.net) |
| 13:49.19 | dcordes_ | j0b0: ever connected to angstrom via usb, ssh on your device? |
| 13:50.10 | j0b0 | yes. i have to remove the key from ~/.ssh/known_hosts every time :) |
| 13:50.40 | dcordes_ | it doesn't accept the blank password for me |
| 13:51.52 | j0b0 | strange .. it worked for me with your X11 image |
| 13:52.43 | j0b0 | make sure you login as root, not ${USER} |
| 13:53.10 | dcordes_ | yea it only has root. something must have changed in 2009.X |
| 13:55.26 | dcordes_ | maybe it's my host config. I'll try on a different machine |
| 14:12.06 | *** join/#htc-linux rmoravcik (n=rmoravci@gtsgw.ttc.cz) |
| 14:28.22 | maejrep | j0b0: that has been fixed |
| 14:29.25 | maejrep | dcordes_: there's an sshd_config entry for allowing blank passwords |
| 14:29.30 | maejrep | :| |
| 14:30.52 | j0b0 | maejrep: cool. :) i dont have all the latest code yet |
| 14:33.49 | j0b0 | im writing a driver for the raph/diam navi pad that is a mashup of the gpio_matrix driver and your keypad i2c chip driver |
| 14:34.16 | j0b0 | once im happy with that i shall try and move it into the latest git |
| 14:34.37 | j0b0 | just to not have 2 factors that could make my kernel not boot :D |
| 14:37.29 | *** join/#htc-linux nato2k (n=templarn@adsl-76-205-128-145.dsl.frs2ca.sbcglobal.net) |
| 14:39.35 | *** join/#htc-linux timebomb (n=tb@p5B3E5CF0.dip.t-dialin.net) |
| 14:45.10 | *** join/#htc-linux AstainHellbring (n=AstainHe@unaffiliated/astainhellbring) |
| 15:12.09 | *** join/#htc-linux orux (n=jose@89.130.46.3) |
| 15:12.39 | *** join/#htc-linux skool (n=azachars@nat/sun/x-f7afd5256b89547e) |
| 15:22.26 | *** join/#htc-linux exco (n=exco@e181066039.adsl.alicedsl.de) |
| 15:23.22 | *** join/#htc-linux marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 15:30.25 | *** join/#htc-linux goxboxlive (n=goxboxli@185.84-48-126.nextgentel.com) |
| 15:30.39 | orux | pichurri, hello |
| 15:32.04 | AstainHellbring | morning |
| 15:39.15 | *** join/#htc-linux myxor (n=myxor@pdbn-4d089f87.pool.mediaWays.net) |
| 15:45.29 | *** join/#htc-linux GPFerror (n=gpferror@cpe-76-187-41-132.tx.res.rr.com) |
| 15:58.59 | pichurri | orux, hey!!! |
| 15:59.15 | pichurri | orux, how you doing? |
| 15:59.21 | orux | pichurri, hello |
| 15:59.28 | pichurri | orux, did you see 2.6.27? it boots!!! but still same issue with screen output, |
| 15:59.40 | pichurri | orux, thou, mmc works, :)! |
| 15:59.47 | orux | pichurri, yes, the problem is the same |
| 16:00.05 | pichurri | orux, yep, have you found something? |
| 16:00.14 | orux | we have an sharp panel, + eps controler |
| 16:01.41 | *** join/#htc-linux rmoravcik (n=rmoravci@gtsgw.ttc.cz) |
| 16:01.54 | pichurri | orux, yeah, have you seen any docs for init stuff of either? |
| 16:02.01 | pichurri | orux, what do you think it is? |
| 16:02.06 | orux | pichurri, i ve dump the pmdh registers that uses wince; |
| 16:02.49 | orux | diferrent that ones used mddi.c |
| 16:03.00 | pichurri | orux, which? |
| 16:03.47 | orux | this function: static void mddi_init_registers(struct mddi_info *mddi) |
| 16:04.34 | *** join/#htc-linux Othello (i=Othello@gateway/tor/x-3954a4c537aab4a0) |
| 16:05.00 | pichurri | orux, interesting! |
| 16:05.14 | pichurri | orux, brb... |
| 16:05.35 | orux | pichurri, foe example, DRIVE_LO uses 0x32 instead 0x50/* 0x32 normal, 0x50 for Toshiba display */ |
| 16:06.08 | orux | i ve hardcoded de values, the same result :( |
| 16:07.59 | orux | one question, the screen shut down after some seconds, do you know why? |
| 16:10.37 | orux | pichurri, other different values are in registers: REV_SIZE, REV_ENCAP_SZ, PAD_CTL, INTEN. |
| 16:16.47 | pichurri | orux, did you correct the screen resolution? |
| 16:17.17 | pichurri | orux, I saw on the trout panel init, that they use some registries to send screen resolution parameters... |
| 16:18.05 | orux | pichurri, no, still working with your .25 initial diff |
| 16:19.17 | orux | pichurri, i test initial code (from sharp trout panel) but doesnt work |
| 16:20.51 | pichurri | orux, well, there is something that always bothered me, I don't thing is an init problem of the panel |
| 16:21.09 | pichurri | orux, if you try to write to the memory of the fb on haret, it prints out correctly |
| 16:21.39 | pichurri | orux, but htc_fb_console (which does not init anything), fails... |
| 16:22.11 | orux | pichurri, i tink the same, |
| 16:22.53 | pichurri | orux, I had been playing with htc_fb_console, and output changes, but not in a good way, :p |
| 16:23.18 | orux | pichurri, it like a syncronization problem; sometimes you can see characters ok! |
| 16:23.23 | pichurri | orux, anyway, sounds interesting what you said about mddi_init_registers, |
| 16:23.26 | pichurri | orux, true, |
| 16:24.12 | orux | pichurri, your screen switch off after the boot? |
| 16:24.22 | pichurri | orux, about the shutdown of the screen, at some point I saw in the logs that hardware senses a bad config, so it shuts down |
| 16:24.34 | pichurri | orux, but I didn't copy the message...:P |
| 16:25.04 | XD | anything new for raph 500 |
| 16:25.12 | XD | we get 1.0 to boot on that yet |
| 16:25.14 | orux | pichurri, with the changes that i ve made, the screen is still on after |
| 16:25.33 | orux | pichurri, it blinks |
| 16:28.00 | pichurri | orux, good! |
| 16:28.04 | orux | pichurri, after two minutes, tray to switch off; if you touch the screen, continues blinking |
| 16:28.31 | pichurri | orux, have you tried the htc_fb_console for tty0? |
| 16:28.52 | orux | pichurri, how? |
| 16:28.57 | pichurri | haven't tried that, but perhaps that prevents the screen from shuting down, as it does nothing to init |
| 16:29.19 | *** join/#htc-linux techie (n=blarg@ip24-250-216-85.ga.at.cox.net) |
| 16:30.36 | pichurri | orux, on the cmdline, add : console=/dev/ttyMSM0 |
| 16:31.01 | orux | pichurri, ok |
| 16:31.06 | pichurri | orux, and set CONFIG_FB_MSM=n on the .config |
| 16:32.40 | orux | pichurri, you can "intuir" the big ANGSTROM letters in the screen :) |
| 16:33.12 | pichurri | orux, jajaja, yes! |
| 16:37.14 | pichurri | orux, have you played with the strade or writel of the x and y or width and height? |
| 16:37.32 | pichurri | orux, in htc_fb_console_update |
| 16:37.58 | pichurri | orux, thou, I did a quick mem dump and I think that the values are correct.... |
| 16:38.06 | orux | pichurri, yes but i tink are correct; are the same that wince uses |
| 16:38.49 | orux | i m dumping the mdph registers from linux |
| 16:39.24 | pichurri | orux, but, fbmem is always different on wince, does it mean that it just updates a part of the screen on each update, because I think that in linux the fbmem is static.... |
| 16:39.34 | pichurri | orux, for htc_fb_console? |
| 16:41.49 | orux | pichurri, i dont know; i think htc_fb-console updates all the screen each time |
| 16:44.58 | pichurri | orux, then, have you tried disabling the line "x = 0; y = 0; w = pi->width; h = pi->height; // XXX - VERY ugly hack so we can draw in fbram" ? |
| 16:47.55 | orux | pichurri, no, i'll try |
| 16:48.19 | pichurri | orux, sorry, its not CONFIG_FB_MSM, its CONFIG_HTC_FB_CONSOLE_BOOT |
| 16:49.25 | *** join/#htc-linux Mullins (n=bw@213.191.248.48) |
| 16:56.57 | orux | pichurri, "disabling the line.... " ko, same behavior initial, then screen off |
| 16:57.11 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 16:57.14 | pichurri | orux, hum |
| 16:58.28 | orux | pichurri, we dont reach the endline, but; almost learning a lot :) |
| 16:59.37 | pichurri | orux, true, so that you know...nunca he trabajado con electronica o hecho algun circuito ni programado dispositivos... |
| 16:59.54 | pichurri | orux, so, yes, I'm learning a lot! |
| 17:00.31 | pichurri | orux, what value do you have for VDE_SIZE on the registries? |
| 17:01.23 | orux | pichurri, where? |
| 17:01.32 | *** join/#htc-linux ewasx (n=armin@5-157.surfsnel.dsl.internl.net) |
| 17:02.16 | pichurri | http://pastebin.com/d5a62b36d |
| 17:02.27 | pichurri | orux, thats for trout toshiba panel... |
| 17:03.20 | pichurri | #defineVDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x50) |
| 17:06.22 | *** join/#htc-linux chab7 (n=kvirc@212.92.4.114) |
| 17:07.21 | orux | pichurri, those registers must be read by mddi_remote_read,... wait |
| 17:10.55 | orux | pichurri, remote_read gives me timeout; |
| 17:15.17 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 17:20.00 | pichurri | orux, gotta go, cya! |
| 17:20.09 | pichurri | orux, let me know if you find something... |
| 17:20.30 | pichurri | orux, better, post on the wiki, :) |
| 17:20.31 | orux | pichurri, ok |
| 17:24.14 | *** join/#htc-linux cr2 (n=konversa@crpl6.physik.uni-wuppertal.de) |
| 17:25.48 | cr2 | orux: can you document the mddi init in the wiki ? |
| 17:26.37 | orux | cr2, i havent it complete |
| 17:26.46 | cr2 | orux: the raph100 is already documented, raph800 is some strange mix between toshiba and epson init |
| 17:27.00 | cr2 | i'll add more epson data later today |
| 17:27.24 | orux | cr2, i am lokking in spl and disptools.dll |
| 17:27.34 | orux | but it is hard for me |
| 17:28.30 | cr2 | ok |
| 17:29.15 | cr2 | i've not looked at the pmdh setup, it should not be that difficult. |
| 17:29.30 | cr2 | the pmdh clock is different though |
| 17:30.45 | orux | cr2, i am now learning, i think you cant trust in me :) |
| 17:32.04 | *** join/#htc-linux BabelO (n=fcr@unaffiliated/babelo) |
| 17:33.15 | cr2 | ok |
| 17:42.24 | maejrep[w] | [09:30:52] <j0b0> maejrep: cool. :) i dont have all the latest code yet <-- I'm actually not sure that NetRipper had the latest fixed version either.. It's possible that I fixed it after sending him the .27 diffs |
| 17:43.38 | maejrep[w] | and, what are you planning for the mashup of gpio_matrix and the i2c chip driver? I don't think they should be mixed.. That's the point of having the chip driver be separate, because the chip driver is not the keyboard driver. |
| 17:44.17 | maejrep[w] | Similarly, the navi driver should be separate from the psoc i2c chip driver, but will depend on it |
| 17:45.33 | *** part/#htc-linux skool (n=azachars@nat/sun/x-f7afd5256b89547e) |
| 17:46.52 | maejrep[w] | For the keypad driver, I moved the buffer flush code from the keypad driver into the microp-ksc driver |
| 17:48.24 | *** join/#htc-linux sut2 (n=su@port-83-236-239-237.static.qsc.de) |
| 18:04.29 | j0b0 | right now i have 1 driver that does the i2c and all gpio stuff |
| 18:05.04 | j0b0 | id be very happy if i get that working, after that i can always make it nice and put all the bits where they belong |
| 18:20.29 | maejrep[w] | of course |
| 18:20.46 | maejrep[w] | was just curious of the end goal, which is where I think combining them is the wrong direction to take it |
| 18:21.03 | maejrep[w] | obviously it's easier to test and get things worked out when combined :) |
| 18:21.13 | maejrep[w] | (also easier when compiled as modules :P) |
| 18:21.43 | *** join/#htc-linux dream_kill (n=nospam@92.56.48.66) |
| 18:22.53 | j0b0 | im now at the point where i can combine the input from the buttons and the trackpad in one place |
| 18:23.29 | *** join/#htc-linux stefan_schmidt (n=stefan@p5B0367B4.dip.t-dialin.net) |
| 18:23.38 | j0b0 | i seem to hit a dead lock tho when i touch the pad (so at least it is being sensed) |
| 18:28.17 | NetRipper | maejrep[w], if that's the case i'm anxiously awaiting a patch ;) i havent had any crashes yetthough |
| 18:28.20 | NetRipper | maybe conincidental |
| 18:28.52 | *** join/#htc-linux imfloflo (n=imfloflo@cap31-6-88-180-73-121.fbx.proxad.net) |
| 18:40.12 | orux | cr2, i ve got the initialization (blackstone) of pmdh registers from spl |
| 18:42.43 | orux | cr2, i'll paste it this night |
| 18:54.42 | *** join/#htc-linux miknix (n=miknix@sjcc176x121.sjccnet.com) |
| 18:59.22 | *** part/#htc-linux orux (n=jose@89.130.46.3) |
| 19:01.27 | maejrep[w] | NetRipper: yeah I'd done one patch just to get it compiling into the kernel |
| 19:01.52 | maejrep[w] | the other one was cleaning that up |
| 19:06.54 | *** join/#htc-linux Xime (n=xime@bankize.net) |
| 19:18.18 | *** join/#htc-linux techie (n=blarg@ip24-250-216-85.ga.at.cox.net) |
| 19:21.05 | *** join/#htc-linux Tinyboom (n=nahh@108.84-49-166.nextgentel.com) |
| 19:21.54 | *** join/#htc-linux kaze (n=kaze@pac33-1-82-235-251-34.fbx.proxad.net) |
| 19:24.15 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbf8b04.pool.einsundeins.de) |
| 19:55.48 | *** join/#htc-linux lastik_ (n=eraser@80.92.96.29) |
| 19:57.31 | *** join/#htc-linux timebomb (n=tb@office.xing.com) |
| 20:20.56 | *** join/#htc-linux AstainHellbring (n=AstainHe@unaffiliated/astainhellbring) |
| 20:23.27 | *** join/#htc-linux TripleQ (n=joost@ip49-198-173-82.adsl2.static.versatel.nl) |
| 20:24.24 | *** join/#htc-linux cr2 (n=cr2@ip-77-25-129-47.web.vodafone.de) |
| 20:24.42 | kaze | hi therehi, i got a very strange problem with android on kaiser |
| 20:25.00 | kaze | everything was running ok with the 21/01 build |
| 20:25.29 | kaze | then i decided to try to pass a call while playing a mp3 to see if the player would shut itself off |
| 20:25.33 | kaze | it did |
| 20:25.36 | cr2 | kaze: kaiser does not have sd ? |
| 20:25.49 | kaze | it has |
| 20:25.59 | cr2 | ah |
| 20:26.01 | cr2 | sorry. |
| 20:26.27 | cr2 | i thought about hermes ;) |
| 20:26.28 | kaze | ok so the player shut itself but i had not any sound in call |
| 20:26.43 | kaze | so i thought phone part crashed |
| 20:26.48 | kaze | rebooted |
| 20:26.54 | kaze | but no sound in call still |
| 20:27.15 | kaze | i done reflashed my rom, radio, hard reseted |
| 20:27.34 | kaze | still no sound in call in android |
| 20:27.40 | kaze | it works ok in winmo |
| 20:27.51 | kaze | and i have all system sound in android |
| 20:27.54 | kaze | even dtmf |
| 20:28.21 | kaze | i tried older builds too |
| 20:28.25 | kaze | and other kernels |
| 20:28.35 | kaze | i can get any sound in call anymore |
| 20:28.51 | kaze | can not |
| 20:29.18 | kaze | i suppose that if it was hardware failure it wouldnt work in winmo |
| 20:29.29 | kaze | so im pretty helpless |
| 20:30.12 | Mullins | have you looked a t volume settings? |
| 20:30.16 | kaze | yup |
| 20:30.20 | kaze | up to the max |
| 20:31.25 | Mullins | I would try to remove data.img and restore data.gz, could not say for definite though |
| 20:31.34 | kaze | i did it |
| 20:31.37 | Mullins | oh |
| 20:31.43 | Mullins | don't know then... |
| 20:31.44 | kaze | i tried any build |
| 20:31.52 | kaze | thats so weird |
| 20:32.22 | kaze | i wish dzo was around the chan |
| 20:32.41 | Mullins | post in the forums and he might help |
| 20:32.46 | kaze | i did post :) |
| 20:32.57 | kaze | only got casual answers |
| 20:33.06 | kaze | things i already tried |
| 20:34.13 | kaze | and im thinking my post will be buried below a bunch of "do you flash the android rom" "is it ready yet" posts |
| 20:41.49 | *** join/#htc-linux nebi (n=nebi@170.ftth2.cust.fyrobs1.upps.se.borderlight.net) |
| 20:43.48 | *** join/#htc-linux yoyey (n=yoann@lns-bzn-49f-81-56-185-87.adsl.proxad.net) |
| 20:53.00 | *** join/#htc-linux Rogro82 (n=rogro82@s5591104d.adsl.wanadoo.nl) |
| 20:53.16 | Rogro82 | hiya all |
| 20:53.27 | exco | hi Rogro82 |
| 20:53.36 | exco | just about to tryout your latest kernel |
| 21:00.12 | Rogro82 | k :) |
| 21:01.29 | exco | Rogro82: no audio in calls |
| 21:02.29 | Rogro82 | i know its because of the latest changes DZO made for the audio... i also cant get it to work although some can with latest system.img |
| 21:03.09 | Rogro82 | The only way i can make the sound in calls work is by changing the audio_path in the kernel but sound will be very soft |
| 21:03.38 | Rogro82 | Can you get a phone connection with latest system.img? |
| 21:03.48 | exco | I with the kernel you made available before - I had audio working - also in calls just not both ways |
| 21:04.30 | exco | I will make a data connection in Win and try (should take 2 mins) |
| 21:04.32 | Rogro82 | Ill create another one with the changes audio path |
| 21:05.29 | exco | nice work on the buttons |
| 21:05.54 | exco | do you now have all info you need for buttons? |
| 21:06.41 | Rogro82 | yes you want to know them for the wiki? Thanks for setting it up! :) |
| 21:07.19 | exco | <PROTECTED> |
| 21:08.03 | Rogro82 | you found in1_23 24 25? |
| 21:08.18 | exco | Internet works |
| 21:08.23 | Rogro82 | they are the matrix button and depend on in1_17 18 19 |
| 21:11.30 | exco | no - didn't find those - but didn't look either |
| 21:11.59 | exco | why does Android show an active gprs connection on boot - although there is none? |
| 21:12.24 | Rogro82 | I think the ril code is setting that up... |
| 21:13.13 | Rogro82 | my problem is i cant get a provider with the latest system.img dzo build... |
| 21:13.28 | Rogro82 | think ill have to change the phone db to support t-mobile nld |
| 21:14.24 | exco | we should assign some identifier to those builds ... you mean the one I linked in the wiki as the latest or the one in the 21.01 zip as latest (which actually isn't the latest) |
| 21:14.38 | *** part/#htc-linux yoyey (n=yoann@lns-bzn-49f-81-56-185-87.adsl.proxad.net) |
| 21:14.55 | cr2 | black100 lcd init is complex |
| 21:15.00 | Rogro82 | hmmm you have a point there.... even i get lost which one is the latest... |
| 21:15.20 | exco | I only could after deleting the APN's in Android and setting the one up my provider uses (don't know why it worked before without - should it even work without that - or is there some db where it gets the info from?) |
| 21:16.00 | kaze | hi there you talkin raph builds? |
| 21:16.58 | Rogro82 | exco was that with the system.img in your wiki? |
| 21:17.22 | exco | not my wiki - everyones wiki :-) |
| 21:17.26 | Rogro82 | the other ones were cdma and didnt do anything to the radio... so the phone just used its open connection |
| 21:17.30 | Rogro82 | :) |
| 21:17.35 | exco | Rogro82: http://forum.xda-developers.com/showpost.php?p=3194496&postcount=2146 |
| 21:17.47 | Rogro82 | k ill use that one as a base to get audio working |
| 21:18.40 | Rogro82 | what provider do you have? |
| 21:18.41 | exco | I wonder why I still need the active data connection from Win though - now that the APN has to be right |
| 21:18.49 | exco | O2 Germany |
| 21:19.30 | Rogro82 | i think the latest system.img doesnt uses pppd at start up |
| 21:20.26 | exco | I think dzo mentioned sth like that |
| 21:20.41 | Rogro82 | ok then it ll be easy to fix |
| 21:20.55 | exco | so after that's fixed we should be able to get gprs working straight from Android |
| 21:21.22 | Rogro82 | yes... it should i could make a connection from my initrd without a prob |
| 21:22.00 | Rogro82 | the calls for cdma and gsm are different... cdma has to dial 777 and we need to initiate a data connection |
| 21:22.42 | exco | cdma = umts? |
| 21:22.52 | Rogro82 | if ill have some time tomorrow ill put my modem-setup in the initrd |
| 21:23.22 | *** join/#htc-linux timebomb (n=tb@85.176.124.201) |
| 21:24.18 | Rogro82 | http://www.wisegeek.com/what-is-the-difference-between-gsm-and-cdma.htm :) |
| 21:25.32 | exco | ok so cdma != umts |
| 21:26.02 | NetRipper | umts and hsdpa are eu like gsm |
| 21:26.57 | *** join/#htc-linux orux (n=jose@89.130.46.3) |
| 21:27.09 | cr2 | NetRipper: umts ==wcdma :) |
| 21:27.33 | NetRipper | what does the w stand for? |
| 21:27.35 | NetRipper | wide? |
| 21:28.39 | cr2 | wideband |
| 21:29.37 | orux | cr2, this is what i found about pmdh init: http://pastebin.com/m2ffa0778 |
| 21:30.50 | *** join/#htc-linux pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 21:31.18 | cr2 | orux: looks good, i think we should do a side-by-side comparison with g1 and other phones |
| 21:33.09 | orux | cr2, i'll continue tomorrow looking inside, but there are a lot of subroutines that i have not identified what them does |
| 21:33.34 | cr2 | http://wiki.xda-developers.com/index.php?pagename=RaphaelMDDI |
| 21:33.50 | cr2 | orux: i've added more epson registers there |
| 21:34.06 | cr2 | at the bottom |
| 21:34.13 | exco | Rogro82: are you interested in getting wifi working or what are your priorities atm? |
| 21:38.43 | orux | cr2, a question; the spl shows the initial htc logo on screen, correct? |
| 21:43.31 | cr2 | maybe |
| 21:43.56 | *** join/#htc-linux Zinbolic (n=chatzill@84.238.80.215) |
| 21:44.20 | cr2 | cc,70,val,2 -> strange new command |
| 21:48.53 | *** join/#htc-linux ttbob (n=ttbob@213.196.240.161) |
| 21:50.27 | exco | does anybody have the neocore apk at hand? |
| 21:53.28 | orux | cr2, the epson registers, i think are the same on blackstone; are going to post the "values"? |
| 22:00.54 | cr2 | orux: it's a long list, and there are some data tables |
| 22:01.04 | cr2 | orux: these tables are from blac100 |
| 22:03.55 | *** part/#htc-linux TripleQ (n=joost@ip49-198-173-82.adsl2.static.versatel.nl) |
| 22:05.27 | orux | cr2, ok but the table begins with: Epson S1D13774 (on raph800) |
| 22:05.58 | orux | ok, i ve to go; see you later! |
| 22:06.39 | *** part/#htc-linux orux (n=jose@89.130.46.3) |
| 22:24.17 | *** join/#htc-linux ewasx (n=armin@2-157.surfsnel.dsl.internl.net) |
| 22:28.12 | *** join/#htc-linux dzo (n=dzo@121.98.128.127) |
| 22:31.27 | *** join/#htc-linux MethoS (n=lem@host-091-097-243-006.ewe-ip-backbone.de) |
| 22:37.50 | *** join/#htc-linux MethoS- (n=lem@dyndsl-085-016-162-121.ewe-ip-backbone.de) |
| 22:38.35 | *** join/#htc-linux MethoS- (n=lem@dyndsl-085-016-162-121.ewe-ip-backbone.de) |
| 22:45.08 | Rogro82 | dzo: any reason why I cant get a network connection with your system.img with the new ril? |
| 22:45.38 | Rogro82 | dzo: Should the telephony.db get updated? or doesnt depend on that? |
| 22:56.41 | *** join/#htc-linux MethoS-- (n=lem@dyndsl-085-016-167-147.ewe-ip-backbone.de) |
| 22:57.01 | cr2 | maejrep: updated the microP wiki page |
| 22:57.15 | *** join/#htc-linux konsta (n=asds@host217-42-14-101.range217-42.btcentralplus.com) |
| 22:57.48 | NetRipper | cr2, do you have linux kernel experience? |
| 22:57.55 | NetRipper | or anyone else for that matter |
| 22:58.09 | NetRipper | i need to know how to do a lock.. thread synchronizations |
| 22:58.10 | NetRipper | -s |
| 23:02.13 | *** join/#htc-linux MethoS (n=lem@dyndsl-085-016-162-211.ewe-ip-backbone.de) |
| 23:04.14 | *** part/#htc-linux kso512 (n=kso@cpe-24-28-76-30.austin.res.rr.com) |
| 23:17.17 | *** join/#htc-linux Untouchab1e (n=Untoucha@82.147.51.146) |
| 23:17.19 | Untouchab1e | hi all |
| 23:17.26 | Untouchab1e | Good evening |
| 23:17.29 | NetRipper | evening |
| 23:17.41 | Untouchab1e | hey! how's it going? |
| 23:18.10 | j0b0 | hola hermanitos |
| 23:18.13 | NetRipper | define it :p |
| 23:18.44 | NetRipper | j0b0, do you know how to make something threadsafe in a kernel environment? |
| 23:18.51 | Untouchab1e | hehe, with you! and the raph port off course :) Any news? |
| 23:19.03 | j0b0 | with mutexen |
| 23:19.21 | NetRipper | do you know any function names i can google on? |
| 23:20.43 | j0b0 | struct mutex yourmutex; mutex_init(&yourmutex); mutex_lock(&yourmutex); mutex_unlock(&yourmutex); |
| 23:21.17 | NetRipper | nice.. mutex_lock is blocking i presume? |
| 23:21.50 | NetRipper | instead of returning a bool |
| 23:21.58 | j0b0 | if its already locked. then it falls through as soon as the current owner unlocks it |
| 23:21.59 | NetRipper | well i can work with this ;) |
| 23:22.04 | NetRipper | exactly |
| 23:22.04 | NetRipper | thx |
| 23:22.05 | NetRipper | :) |
| 23:22.41 | j0b0 | i can tell where you press a button on the navi pad :) |
| 23:22.49 | NetRipper | sweet! |
| 23:22.56 | NetRipper | nice job :) |
| 23:23.06 | j0b0 | that gives us 4 more buttons |
| 23:23.21 | NetRipper | great :) |
| 23:23.22 | Untouchab1e | so, sorry for being curious, but I havent been able to follow up on the development in the IRC channel the last 24 hours.. has any new progress been made? |
| 23:23.47 | NetRipper | Untouchab1e, we've ported to .27.. so we're trying to get things stable on the new tree.. |
| 23:24.01 | j0b0 | i dont know .. i think some research on lcd panels or mddi init |
| 23:24.05 | j0b0 | i saw scrolling by |
| 23:24.19 | NetRipper | there are some graphical glitches that prevent android (and X for that matter) from working properly |
| 23:24.42 | Untouchab1e | Ah, right.. so we have really decided to stick with .27? |
| 23:24.45 | NetRipper | though im currently working on the touchscreen driver.. |
| 23:24.49 | Untouchab1e | cool |
| 23:24.51 | *** join/#htc-linux PoohbaLT1 (n=Poohba@c-98-235-66-242.hsd1.nj.comcast.net) |
| 23:25.15 | NetRipper | it's still poll-based.. we got the interrupt to fire so im turning it around |
| 23:25.46 | Untouchab1e | ah, I knew we got interrupts firing, but I didnt know we were still using the polling-based solution.. |
| 23:25.50 | j0b0 | maejrep around? |
| 23:26.22 | j0b0 | the info on the wiki for the data from the navi touch pad is ..uhm.. different for me |
| 23:26.25 | NetRipper | well didnt have time to implement it earlier.. and it's quite a hassle as vkeyb redraws based on that polling.. and the 'dirty hack' in the msm_fb also depends on that polling ;) |
| 23:26.32 | j0b0 | maybe its a raph100/800 thing |
| 23:26.41 | Untouchab1e | hehe |
| 23:27.05 | NetRipper | j0b0, we also found that the stylus in/out is via i2c on raph100, while it's a gpio on raph800 |
| 23:28.18 | j0b0 | ..which explans why all the stylus rumours never worked for me |
| 23:29.05 | NetRipper | yea same here |
| 23:30.16 | NetRipper | also, raph800 has a GPIO for hardware keyboard backlight as well as access via i2c... while raph100 can only access it via i2c, no gpio |
| 23:31.43 | j0b0 | wow .. we do a lot over i2c |
| 23:32.07 | NetRipper | yep |
| 23:33.10 | j0b0 | NetRipper can you boot this kernel: http://tibook.jb.b4m.com/j0b0/zImage-navi-jobo |
| 23:33.29 | j0b0 | and see if the navi works for you |
| 23:34.52 | j0b0 | i mapped 'home' to 'menu' (because end is already home and menu is nice to have and i wanted all 4 directions :) |
| 23:36.21 | Rogro82 | matrix gpios? |
| 23:36.29 | NetRipper | is that kernel .25 or .27? |
| 23:36.44 | j0b0 | Rogro82 yes. a gpio matrix + touch pad |
| 23:36.47 | j0b0 | NetRipper .25 |
| 23:36.56 | NetRipper | ok |
| 23:38.06 | Rogro82 | k... just had to do the same for the polaris to get all buttons to work properly... also the sound switch... pain in the ass while the device has like 8 buttons :S |
| 23:38.47 | j0b0 | does it also have a touch pad, like on raph/diam |
| 23:39.31 | Rogro82 | no just normal buttons... its a 3x3 matrix and a couple of normal input gpios |
| 23:40.13 | j0b0 | couldnt you have gpio_matrix.c do the work? |
| 23:40.26 | NetRipper | im still using the old android 1.0 so i don thave that spare key thingy to remap my end key :p |
| 23:40.29 | NetRipper | so still makes my screen blank |
| 23:40.32 | NetRipper | but i'll try in a few mins |
| 23:41.00 | Rogro82 | job0: that allows only normal keycodes to be mapped isnt it? |
| 23:41.45 | j0b0 | the code and values to determin the key from the location needs some tweaking tho |
| 23:42.00 | j0b0 | Rogro82 what is 'normal?' |
| 23:42.55 | Rogro82 | i mean can you catch the falling-rising event? or can you only set it to use a keycode? |
| 23:44.21 | j0b0 | you cant catch events. you just populate a bunch of structs and arrays and register the device |
| 23:44.39 | j0b0 | look at board-trout-keypad.c |
| 23:44.50 | Rogro82 | k... ill look into it... thnx :) |
| 23:45.08 | j0b0 | it also does a switch and camera buttons |
| 23:46.30 | j0b0 | for me that wasnt good enough because the same key in the matrix can be 3 keys depending on where you press it |
| 23:47.46 | Rogro82 | aha... do you get an actual location from the touchpad? |
| 23:48.16 | NetRipper | j0b0, can you also read the pressure? |
| 23:48.28 | j0b0 | yes. on the raphael and diamond, the so called navi pad is touch sensitive and has a couple of hard buttons under it |
| 23:48.43 | Rogro82 | cool |
| 23:48.48 | j0b0 | there is 1 hard button for home, send, left, and 1 for back, end, right |
| 23:49.15 | j0b0 | NetRipper I dont know. probably. i just decode teh bare minimum |
| 23:49.28 | NetRipper | ok, just curious |
| 23:49.29 | NetRipper | :) |
| 23:49.53 | j0b0 | it doesnt do the scroll ring yet |
| 23:50.04 | NetRipper | er lol j0b0 what did you add at the beginning of the htc_fb_console? some very bright colors;) |
| 23:50.05 | j0b0 | i have to look into what kind of event that is |
| 23:50.25 | Rogro82 | aha... sometimes i dont really how they choose the layout/sharing of the buttons... we have 2x2 buttons for call/hangup ie/nav and one for vol up/vol down/voice recorder |
| 23:52.05 | j0b0 | NetRipper those colors all have the highest and lowest bit on for high and only the lowest for low, so that it would look as different as possible if the colorspace is different |
| 23:52.24 | NetRipper | j0b0, awsome, it's working ;) |
| 23:52.39 | NetRipper | ah ok |
| 23:52.58 | j0b0 | so its a bit diagnostic |
| 23:53.56 | NetRipper | j0b0, though, my 'home' button and my 'pickup' button do the same |
| 23:54.01 | NetRipper | but 'left' is actually left |
| 23:54.11 | j0b0 | your home button should be 'menu' |
| 23:54.13 | NetRipper | same with my hangup and back buttons |
| 23:54.17 | NetRipper | yes |
| 23:54.19 | NetRipper | but pickup is also menu |
| 23:54.33 | NetRipper | eh |
| 23:54.36 | NetRipper | it isnt now |
| 23:55.21 | NetRipper | ok pickup doesn't do anything, what did you map to that? |
| 23:55.46 | j0b0 | KEY_SEND |
| 23:56.11 | j0b0 | when youre in dialer and enter a number and then 'send' it calls |
| 23:56.20 | NetRipper | hm ok |
| 23:56.20 | j0b0 | maybe there is a more appropriate KEY_BLA for it |
| 23:56.23 | NetRipper | ok |
| 23:56.27 | NetRipper | and end key works too |
| 23:56.31 | NetRipper | it just doesn't blank my screen anymore |
| 23:56.35 | NetRipper | but when i hold it |
| 23:56.41 | NetRipper | it wants to turn my phone off ;) |
| 23:56.53 | NetRipper | which it does (well, it locks it up anyway) |
| 23:57.31 | j0b0 | yes. holding end more than 1 sec is power off, ad inmost recent android also silent mode |