| 00:06.47 | *** join/#htc-linux Opius (~Opius@cpc2-addl4-2-0-cust309.6-3.cable.virginmedia.com) |
| 00:18.45 | *** join/#htc-linux WoZZeR__ (no@d14-69-99-229.try.wideopenwest.com) |
| 00:26.11 | *** join/#htc-linux M3DLGpc (~M1DLGpc@bb-87-81-252-83.ukonline.co.uk) |
| 00:28.54 | *** join/#htc-linux GNUtoo|laptop (~gnutoo@host55-144-dynamic.54-79-r.retail.telecomitalia.it) |
| 00:32.34 | WoZZeR__ | jonpry: you around? |
| 00:34.09 | *** join/#htc-linux HardDisk_WP (~marco@wikipedia/harddisk) |
| 00:34.13 | *** join/#htc-linux Baeen (~Bane@ppp118-208-202-97.lns20.hba1.internode.on.net) |
| 00:38.37 | jonpry | hey wozzer |
| 00:38.39 | jonpry | whats up? |
| 00:38.53 | WoZZeR_ | I'm trying to get the mtd partition locations |
| 00:39.01 | WoZZeR_ | 439.00M (0x1b700000) FLASHDR |
| 00:39.01 | WoZZeR_ | | 124.00k (0x1f000) Part00 |
| 00:39.01 | WoZZeR_ | | 3.38M (0x360000) Part01 |
| 00:39.01 | WoZZeR_ | | 274.88M (0x112e0000) Part02 |
| 00:39.01 | WoZZeR_ | | 160.63M (0xa0a0000) Part03 |
| 00:39.11 | WoZZeR_ | I've got the sizes from a stock rom |
| 00:39.18 | WoZZeR_ | but I don't know the starting address |
| 00:39.46 | jonpry | got the sizes? like the different .nb's in the nbh? |
| 00:39.55 | WoZZeR_ | mtdparts=msm_nand:0x10000000@0x0(nand)ro,0x00040000@0x029a0000(root),0x066C0000@0x029e0000(system),0x06f60000@0x090a0000(userdata) sets the mtd blocks |
| 00:40.14 | WoZZeR_ | no, the internal memory |
| 00:40.18 | WoZZeR_ | when it flashes os.nb |
| 00:40.22 | WoZZeR_ | part 00 is ULDR |
| 00:40.26 | WoZZeR_ | part 01 is XIP |
| 00:40.33 | WoZZeR_ | what we are writing with the nbh |
| 00:40.37 | WoZZeR_ | part 02 is the ROM section |
| 00:40.42 | WoZZeR_ | part 03 is userspace |
| 00:41.14 | WoZZeR_ | I'm assuming part 02 is editable, but set to read only |
| 00:41.18 | jonpry | those aren't really what we would be dealing with when doing mtdparts |
| 00:41.19 | WoZZeR_ | so you can't edit it |
| 00:41.45 | WoZZeR_ | I didn't want to mess around too much and kill the xip |
| 00:42.10 | WoZZeR_ | since mtd0 killed my other rhod, I'm assuming it started at 0x0 |
| 00:42.22 | WoZZeR_ | so I want to know where to start the system mtd2 and the user mtd3 |
| 00:42.28 | jonpry | mtd0 starts there because we don't set anything up |
| 00:42.31 | WoZZeR_ | and root mtd1 |
| 00:42.38 | WoZZeR_ | yeah, that's what I figureds |
| 00:42.46 | WoZZeR_ | figured* |
| 00:43.17 | jonpry | so we might not want to do this |
| 00:43.33 | WoZZeR_ | but we can set where the mtd areas are |
| 00:43.39 | jonpry | but on a "real" android phone, they setup the partitions to allows for flashing |
| 00:43.50 | WoZZeR_ | kaiser has them as well |
| 00:43.55 | WoZZeR_ | to install to internal memory |
| 00:44.02 | jonpry | so like mtd0 is qcsbl, mtd1 is radio, mtd2 is spl. |
| 00:44.08 | WoZZeR_ | but only 3 instead of 6 |
| 00:44.11 | jonpry | you get the idea anyway |
| 00:44.16 | jonpry | i don't know how many |
| 00:44.20 | WoZZeR_ | I do |
| 00:44.23 | WoZZeR_ | I did reasearch |
| 00:44.25 | WoZZeR_ | research* |
| 00:44.42 | jonpry | that stuff from winmo. is just what winmo wants to do. has no relation to the hardware |
| 00:44.48 | WoZZeR_ | ahh, ok |
| 00:45.15 | WoZZeR_ | so is there a way to find the starting address of part 02? |
| 00:45.21 | WoZZeR_ | haret maybe? |
| 00:45.39 | jonpry | so you can make whatever scheme you want. like kernel has 5mb reserved. and initrd gets some space |
| 00:46.11 | jonpry | on android the address you want is passed in from atag. i'm not sure how to find it on winmo yet |
| 00:47.01 | WoZZeR_ | 029a0000 seems a little small |
| 00:47.07 | WoZZeR_ | that's only about 3.5 megs in or so |
| 00:47.13 | WoZZeR_ | 3 rather |
| 00:48.18 | *** join/#htc-linux spetrillo (~SteveP@71.167.186.40) |
| 00:48.23 | jonpry | 29a0000? |
| 00:48.29 | WoZZeR_ | 0x00040000@0x029a0000(root) |
| 00:48.38 | WoZZeR_ | or 30 megs |
| 00:49.29 | jonpry | radio spl is a little bigger than 30 |
| 00:50.48 | jonpry | biggest problem is that my user area is at different address than yours |
| 00:51.04 | WoZZeR_ | oh |
| 00:51.06 | WoZZeR_ | damn |
| 00:51.32 | WoZZeR_ | how much different? |
| 00:51.42 | WoZZeR_ | is it based on radio size? |
| 00:55.15 | jonpry | maybe not radio size, but some reserved radio size |
| 00:55.29 | WoZZeR_ | If I set it back far enough, that would be find though, right? |
| 00:55.53 | WoZZeR_ | fine* |
| 00:55.57 | jonpry | mine is 0x27c0000 or so. and yours is at 0x2be0000 or so |
| 00:56.16 | WoZZeR_ | the user area start? |
| 00:57.06 | jonpry | i guess. it would be nice to detect it. if you can find the kernel then it could be flashed from within android |
| 00:57.13 | jonpry | and initrd |
| 00:57.49 | WoZZeR_ | wouldn't it have to find it brute force style though? |
| 00:57.51 | jonpry | i'm calling it the user area. it is the area that is readable. apparently spl or some part of it is also in there |
| 00:57.54 | WoZZeR_ | just chug through an area |
| 00:58.25 | jonpry | that is one way. but spl knows where it is. and that is in smem somewhere |
| 00:59.12 | WoZZeR_ | can mtdparts be set in initrd? |
| 00:59.20 | WoZZeR_ | or are they cmdline |
| 00:59.21 | WoZZeR_ | only |
| 01:00.24 | *** join/#htc-linux danibjor (~no@27.137.251.212.customer.cdi.no) |
| 01:01.48 | WoZZeR_ | I have an idea |
| 01:01.51 | WoZZeR_ | if I do a task 29 |
| 01:01.55 | WoZZeR_ | then flash the nbh |
| 01:02.10 | WoZZeR_ | I should be able to see where the blank area is |
| 01:02.15 | WoZZeR_ | by dumping mtd0 to a file |
| 01:02.22 | WoZZeR_ | and looking for partition information |
| 01:03.46 | jonpry | can you objdump tinboot? |
| 01:03.56 | WoZZeR_ | what's objdump? |
| 01:04.30 | jonpry | you know like. arm-eabi-4.2.0-gcc. but arm-eabi-4.2.0-objdump |
| 01:05.58 | WoZZeR_ | arm-eabi-objcopy tinboot.o -O binary tinbootxip |
| 01:06.01 | WoZZeR_ | change that to dump? |
| 01:06.29 | jonpry | objdump -D tinboot.o |
| 01:06.57 | WoZZeR_ | just run it? |
| 01:07.03 | jonpry | yeah it will make text |
| 01:07.50 | WoZZeR_ | tinboot.o: file format elf32-little |
| 01:07.50 | WoZZeR_ | objdump: Can't disassemble for architecture UNKNOWN! |
| 01:08.08 | jonpry | arm-eabi-objdump |
| 01:08.48 | WoZZeR_ | steam it to a file? |
| 01:09.17 | jonpry | pipe it to head 100 |
| 01:09.40 | WoZZeR_ | | head 100 |
| 01:09.43 | WoZZeR_ | ? |
| 01:09.43 | jonpry | yeah |
| 01:09.53 | WoZZeR_ | head: cannot open `100' for reading: No such file or directory |
| 01:10.12 | jonpry | head -n 100 |
| 01:10.42 | jonpry | pastebin it if you can |
| 01:10.58 | WoZZeR_ | http://pastebin.com/ZSuRBeMp |
| 01:11.23 | WoZZeR_ | what's the difference between mtd and mtdblock? |
| 01:14.49 | jonpry | so tinboot appears to be flashed to offset 0x302003c |
| 01:15.30 | jonpry | it might be 0x3020000 with some weird linking |
| 01:16.08 | jonpry | yeah it is |
| 01:16.20 | jonpry | mtdblock is block device other is char |
| 01:16.49 | jonpry | probably need mtdblock for mounting a filesystem |
| 01:16.57 | jonpry | but maybe not |
| 01:17.13 | *** join/#htc-linux devilcuban (Devilcuban@cpe-24-160-121-180.tampabay.res.rr.com) |
| 01:17.22 | jonpry | i would try searching smem for 0x3020000 |
| 01:19.53 | WoZZeR_ | cat /dev/mtd/mtd0 > /sdcard/image.img should dump all of the internal memory, right? |
| 01:20.12 | jonpry | right |
| 01:20.34 | jonpry | i just went through the image you gave me before |
| 01:20.44 | WoZZeR_ | will it automatically stop when it's done? |
| 01:20.49 | jonpry | no |
| 01:20.51 | WoZZeR_ | ok |
| 01:21.06 | jonpry | but your nand images only live below 50mb or so |
| 01:21.31 | WoZZeR_ | well, I want to dump all 512 megs |
| 01:21.39 | WoZZeR_ | I did a task 29, to wipe everything |
| 01:21.42 | WoZZeR_ | flashed a radio |
| 01:21.44 | WoZZeR_ | then my nbh |
| 01:21.50 | jonpry | then go for it |
| 01:22.29 | WoZZeR_ | is there a way to ls so I get megs instead of bytes |
| 01:22.49 | jonpry | not that i know of |
| 01:22.53 | *** part/#htc-linux yaypunkrock (~Dipesh@78-86-3-70.zone2.bethere.co.uk) |
| 01:25.10 | stinebd | ls -h |
| 01:25.30 | stinebd | will choose the most human-friendly unit |
| 01:25.34 | jonpry | it looks like a microsoft boot loader is installed. and might be running your tinboot |
| 01:25.50 | WoZZeR_ | oh |
| 01:25.53 | WoZZeR_ | it did stop at 512 |
| 01:25.56 | WoZZeR_ | cool |
| 01:26.19 | WoZZeR_ | yeah, tinboot is a hack. it loads tinboot as if it were an xip |
| 01:26.32 | WoZZeR_ | stinebd: thanks! that worked |
| 01:26.53 | WoZZeR_ | now the fun part |
| 01:29.33 | jonpry | hmm. you will have to tell me more about this xip. i'll be back later |
| 01:29.38 | WoZZeR_ | ok |
| 01:30.38 | WoZZeR_ | ugh, looking through 512MB in a hex editor is not fun |
| 01:45.00 | WoZZeR_ | any of my rhod testers here? |
| 01:48.48 | *** join/#htc-linux sykosoft (adf6d4ab@gateway/web/freenode/ip.173.246.212.171) |
| 01:49.04 | sykosoft | wozzer: was reading the logs, what do you need tested? rhod400 using nand test 5 currently |
| 01:49.16 | WoZZeR_ | do you know how to get smem address? |
| 01:49.50 | WoZZeR_ | actually |
| 01:49.55 | WoZZeR_ | I just need a mtd0 dump |
| 01:50.06 | sykosoft | all right |
| 01:50.23 | WoZZeR_ | are you running it now? |
| 01:50.29 | sykosoft | yes |
| 01:50.57 | WoZZeR_ | ok, first |
| 01:51.00 | WoZZeR_ | can you task 29? |
| 01:51.01 | WoZZeR_ | http://forum.ppcgeeks.com/cdma-tp2-upgrades/116571-tool-task-29-format-internal-memory-without-drivers-witout-mtty.html |
| 01:51.12 | WoZZeR_ | that will wipe the internal memory |
| 01:51.21 | WoZZeR_ | normally done before new roms every once and a while |
| 01:51.29 | WoZZeR_ | you flash it |
| 01:51.31 | WoZZeR_ | like a rom |
| 01:51.58 | sykosoft | I assume it removes the xip test5 I've got too? |
| 01:52.00 | sykosoft | just curious |
| 01:52.11 | WoZZeR_ | yeah |
| 01:52.13 | WoZZeR_ | just the nbh part |
| 01:52.17 | WoZZeR_ | not all the data and everything |
| 01:52.22 | WoZZeR_ | you can flash it again |
| 01:52.36 | sykosoft | yeah, that's fine (it's hard to brick these) |
| 01:53.21 | WoZZeR_ | I won't have you write anything |
| 01:53.28 | WoZZeR_ | so it should not be possible |
| 01:53.34 | WoZZeR_ | as long as you don't pull the usb cord like I did |
| 01:53.49 | sykosoft | haha, no, the pullout method is bad |
| 01:54.06 | *** join/#htc-linux test (48500104@gateway/web/freenode/ip.72.80.1.4) |
| 01:54.23 | *** part/#htc-linux test (48500104@gateway/web/freenode/ip.72.80.1.4) |
| 01:55.07 | WoZZeR_ | let me know when you get back into android |
| 01:55.20 | sykosoft | did you want the task 29 first? |
| 01:55.34 | WoZZeR_ | it removes everything from your winmo stuff |
| 01:55.42 | sykosoft | ok |
| 01:55.45 | WoZZeR_ | when you flash a rom, it just overwrites |
| 01:55.48 | WoZZeR_ | it doesn't actually erase |
| 01:56.16 | WoZZeR_ | hmmm, you may need to flash to winmo and do a *228 before you get calling back |
| 01:56.33 | WoZZeR_ | but do that after dumping the mtd in android |
| 01:56.39 | sykosoft | all right |
| 01:56.41 | WoZZeR_ | sorry, forgot about that |
| 01:56.48 | sykosoft | running task29.exe, getting a file not found error |
| 01:56.59 | WoZZeR_ | you need a ruu_signed.nbh |
| 01:57.17 | WoZZeR_ | http://forum.xda-developers.com/showpost.php?p=5845908&postcount=1 |
| 01:57.20 | WoZZeR_ | oh, use that repack |
| 01:57.27 | WoZZeR_ | whoops |
| 01:57.27 | WoZZeR_ | http://forum.xda-developers.com/showpost.php?p=5845908&postcount=1 |
| 01:57.47 | sykosoft | better, thanks |
| 01:57.54 | WoZZeR_ | no, thank you |
| 01:58.28 | sykosoft | yay for empty phone |
| 01:58.43 | sykosoft | eh, invalid model id on the repack |
| 01:58.47 | sykosoft | but |
| 01:58.49 | WoZZeR_ | wtf, really? |
| 01:58.52 | sykosoft | yeah |
| 01:59.02 | sykosoft | and there it goes booting into android |
| 01:59.08 | sykosoft | let me try my ruu I've got |
| 01:59.15 | WoZZeR_ | if it's going to linux |
| 01:59.16 | WoZZeR_ | that's fine |
| 01:59.22 | WoZZeR_ | wait, it shouldn't though |
| 01:59.47 | sykosoft | it's cool, I'll put a radio nbh in the other one |
| 01:59.53 | WoZZeR_ | ok |
| 02:00.42 | sykosoft | so that I know when I got to put android back |
| 02:00.46 | WoZZeR_ | if you ever think it's a good idea to go through 512 megs of data 1K at a time... don't |
| 02:00.46 | sykosoft | which test do you consider most stable? |
| 02:00.47 | sykosoft | still 5? |
| 02:00.53 | WoZZeR_ | yeah |
| 02:00.53 | sykosoft | yeah, I've done that |
| 02:00.58 | WoZZeR_ | 5 is probably good |
| 02:01.01 | sykosoft | recovering truncated innodb tables in mysql |
| 02:01.06 | WoZZeR_ | haha, ouch |
| 02:01.22 | sykosoft | yeah, before the days of innodb tools |
| 02:01.27 | sykosoft | when it was literally a by-hand thing |
| 02:01.34 | WoZZeR_ | ouch, this is just reading |
| 02:01.35 | sykosoft | it pretty much....sucked |
| 02:01.35 | WoZZeR_ | at least |
| 02:02.14 | sykosoft | curiously, is there a way to restore just the xip for windows mobile? |
| 02:02.22 | WoZZeR_ | If the address matchs up, I may be able to get android to internal memory |
| 02:02.23 | sykosoft | so, I can flash back and forth between the two without wiping? |
| 02:02.38 | WoZZeR_ | hmmm, never thought of it |
| 02:02.45 | WoZZeR_ | there may be |
| 02:02.58 | WoZZeR_ | the only problem is the imgfs.bin. it may not work well |
| 02:07.33 | sykosoft | task29 with sprint radio 2.32 is done |
| 02:07.37 | sykosoft | now back to winmo? |
| 02:07.41 | sykosoft | or android? |
| 02:07.46 | sykosoft | I can worry about calling later |
| 02:07.46 | WoZZeR_ | stinebd: any idea of a command that will allow someone to get a mtd memory address? |
| 02:07.47 | WoZZeR_ | android |
| 02:07.47 | sykosoft | it's not big deal |
| 02:07.51 | WoZZeR_ | cool, thanks! |
| 02:08.07 | WoZZeR_ | if I just want 128K from mtd0 @ 33a0000 |
| 02:08.27 | sykosoft | sorry, know how to do that with dd, but you're not using block devices |
| 02:08.36 | WoZZeR_ | oh |
| 02:08.42 | WoZZeR_ | if you can do that with dd, it will work |
| 02:08.48 | WoZZeR_ | su |
| 02:08.53 | WoZZeR_ | modprobe mtdchar |
| 02:09.22 | WoZZeR_ | crap, should have asked if you knew how first, sorry |
| 02:09.40 | *** join/#htc-linux noellenchris (ad3d72f1@gateway/web/freenode/ip.173.61.114.241) |
| 02:10.21 | sykosoft | starting at 54132736, yeah? |
| 02:10.42 | WoZZeR_ | yeah |
| 02:11.04 | WoZZeR_ | can you post what commands you type |
| 02:11.17 | WoZZeR_ | I'm a n00b at that hardcore stuff, I'm just a thinking man |
| 02:12.32 | sykosoft | yeah, does it go to /sdcard? |
| 02:12.36 | stinebd | dd if=/dev/mtd0 of=whatever skip=54132736 bs=1024 count=128 |
| 02:13.19 | stinebd | maybe skip should be 0x33a0000 - 1 |
| 02:13.23 | stinebd | don't know |
| 02:13.54 | sykosoft | yeah, that's pretty much exactly what I was going to do |
| 02:13.58 | sykosoft | (not sure about the -1) |
| 02:14.07 | sykosoft | I'm assuming the output location is /sdcard/something |
| 02:14.08 | stinebd | bs=1024 probably wouldn't work directly on the device |
| 02:14.19 | stinebd | so you can adjust bs to the mtd's block size and count as necessary |
| 02:14.24 | stinebd | or just use that on a dumped image |
| 02:14.32 | sykosoft | I haven't really delved the filesystem layout in android |
| 02:14.36 | sykosoft | really? |
| 02:14.40 | sykosoft | I would expect 1k to work |
| 02:14.48 | sykosoft | but, if you know differently, what bs value should I use |
| 02:14.50 | sykosoft | ? |
| 02:14.57 | stinebd | the flash block size is 8192 |
| 02:15.11 | stinebd | mtd is pissy if you use wrong block size, at least for writes |
| 02:15.14 | sykosoft | all right |
| 02:16.14 | sykosoft | you know what pisses me off? that the usb cable fits into the nic on this netbook |
| 02:16.19 | WoZZeR_ | well, let me know what works |
| 02:16.21 | sykosoft | you're like....why isn't it working?! |
| 02:16.33 | WoZZeR_ | lol |
| 02:16.44 | stinebd | i have hdmi next to usb on my laptop and i'm always confused that the plug wont fit |
| 02:17.05 | sykosoft | yeah, happens |
| 02:17.12 | sykosoft | I had a laptop with both vga and db9 |
| 02:17.20 | sykosoft | and somehow, I could get one to fit where it shouldn't |
| 02:17.26 | sykosoft | mind you, it was the wrong end of the cord anyway |
| 02:17.39 | WoZZeR_ | hah |
| 02:18.10 | sykosoft | that'll be a good reason that you can't connect to the cisco switch via com1 |
| 02:18.12 | WoZZeR_ | so, this should dump 128K from mtd0? |
| 02:18.12 | WoZZeR_ | su |
| 02:18.12 | WoZZeR_ | modprobe mtdchat |
| 02:18.12 | WoZZeR_ | dd if=/dev/mtd0 of=/sdcard/imgfs.bin skip=54132736 bs=8192 count=16 |
| 02:18.22 | sykosoft | all right, will do |
| 02:18.27 | sykosoft | it's booting niow |
| 02:18.28 | sykosoft | *now |
| 02:18.34 | WoZZeR_ | cool |
| 02:18.40 | sykosoft | the terminal is in "other pieces" or something like that, right? |
| 02:19.07 | WoZZeR_ | what's the best way to read a nand dump so it skips long blocks of FF's |
| 02:19.11 | WoZZeR_ | but still tells me address |
| 02:19.23 | sykosoft | probably in vi |
| 02:21.27 | WoZZeR_ | for 512MB? |
| 02:25.15 | sykosoft | fyi |
| 02:26.42 | sykosoft | dd if=/dev/mtd/mtd0 of=/sdcard/imgfs.bin skip=54132736 bs=8192 count=16 |
| 02:26.47 | sykosoft | note the /dev/mtd/mtd0 |
| 02:26.48 | WoZZeR_ | yeah |
| 02:26.50 | WoZZeR_ | just changed that |
| 02:26.55 | WoZZeR_ | and mtdchar, not chat |
| 02:26.55 | WoZZeR_ | lol |
| 02:27.25 | sykosoft | just curious how long it should take? |
| 02:27.30 | sykosoft | cause |
| 02:27.33 | WoZZeR_ | 1 sec |
| 02:27.34 | sykosoft | for such a small dump |
| 02:27.39 | sykosoft | that's taking a while |
| 02:28.30 | sykosoft | still sitting there |
| 02:28.48 | WoZZeR_ | yeah |
| 02:28.55 | WoZZeR_ | still a 0 byte file as well |
| 02:29.18 | sykosoft | how does one bring up a softkeyboard in this? |
| 02:29.38 | WoZZeR_ | I used the 5 star terminal in app market |
| 02:29.45 | WoZZeR_ | the windows key brought up a window |
| 02:29.56 | WoZZeR_ | that can bring up the keyboard |
| 02:30.47 | *** join/#htc-linux g55 (~g55@rgnb-5d878963.pool.mediaWays.net) |
| 02:30.56 | sykosoft | as a tip |
| 02:31.00 | sykosoft | in the terminal in dev tools |
| 02:31.03 | sykosoft | you can go into preferences |
| 02:31.07 | sykosoft | change the control key to @ key |
| 02:31.14 | sykosoft | which is the mail icon key on the rhod400 |
| 02:31.19 | WoZZeR_ | didn't work for me |
| 02:31.21 | WoZZeR_ | I tried |
| 02:31.29 | WoZZeR_ | I can try again though |
| 02:31.54 | WoZZeR_ | nope, not for me |
| 02:32.00 | WoZZeR_ | I just get a ^C |
| 02:32.06 | sykosoft | yes |
| 02:32.08 | sykosoft | so hold it |
| 02:32.12 | sykosoft | and push c |
| 02:32.14 | sykosoft | ctril-c |
| 02:32.17 | sykosoft | *ctrl-c |
| 02:32.22 | WoZZeR_ | nope |
| 02:32.26 | sykosoft | hmm |
| 02:32.27 | sykosoft | worked for me |
| 02:32.30 | WoZZeR_ | just spams ^c to the screen |
| 02:32.31 | sykosoft | anyways |
| 02:32.36 | sykosoft | 0 byte file |
| 02:32.38 | WoZZeR_ | ok, dd doesn't want to work |
| 02:32.53 | sykosoft | new instructions? |
| 02:32.57 | WoZZeR_ | let me see what we used to read last time |
| 02:33.00 | WoZZeR_ | gotta look at logs |
| 02:34.06 | sykosoft | have you used nanddump? |
| 02:34.11 | WoZZeR_ | no |
| 02:34.22 | WoZZeR_ | maybe if we use a block instead of a char? |
| 02:34.29 | sykosoft | dd needs a block dev |
| 02:34.35 | sykosoft | I don't think it'll work on a char |
| 02:34.59 | WoZZeR_ | dd if=/dev/block/mtdblock0 of=/sdcard/imgfs.bin skip=54132736 bs=8192 count=16 |
| 02:35.00 | WoZZeR_ | didn't work |
| 02:35.03 | WoZZeR_ | i/o error |
| 02:35.08 | WoZZeR_ | lemme double check the block is there |
| 02:35.27 | WoZZeR_ | yup, looks to be there |
| 02:36.08 | WoZZeR_ | the way I did it today was cat dev/mtd/mtd0 > /sdcard/image.img |
| 02:36.53 | WoZZeR_ | ok, worked without skip |
| 02:37.06 | sykosoft | makes me want to install gentoo in a chroot |
| 02:37.09 | sykosoft | then I can really do anything |
| 02:37.39 | sykosoft | I was faily certain you had to use skip vs seek |
| 02:38.04 | sykosoft | oh |
| 02:38.06 | sykosoft | misread |
| 02:38.10 | sykosoft | the block worked with skip? |
| 02:38.17 | sykosoft | it's seek on block devs |
| 02:38.27 | WoZZeR_ | no, I removed skip |
| 02:38.33 | WoZZeR_ | so I could see if it could read it fine |
| 02:38.38 | sykosoft | try it with seek |
| 02:38.57 | WoZZeR_ | dd: /sdcard/imgfs.bin: File too large |
| 02:39.01 | WoZZeR_ | lol |
| 02:41.46 | WoZZeR_ | hmmm |
| 02:41.52 | WoZZeR_ | skip=54132 |
| 02:41.53 | WoZZeR_ | that works |
| 02:41.59 | WoZZeR_ | skip=541327 |
| 02:42.01 | WoZZeR_ | that doesn't |
| 02:42.41 | WoZZeR_ | is it because of bs? |
| 02:43.18 | sykosoft | possibly |
| 02:43.21 | sykosoft | unsure |
| 02:43.23 | WoZZeR_ | nope |
| 02:43.24 | sykosoft | it's late, I'm tired |
| 02:43.28 | WoZZeR_ | well, maybe not |
| 02:44.00 | sykosoft | hmm |
| 02:44.05 | sykosoft | you could possibly try |
| 02:44.07 | sykosoft | cat the image |
| 02:44.10 | sykosoft | to a file |
| 02:44.12 | sykosoft | then use dd on the file |
| 02:44.35 | sykosoft | frankly, I don't know what you'll get |
| 02:44.49 | WoZZeR_ | I just cat'd it |
| 02:44.54 | WoZZeR_ | if you want to do that, that works |
| 02:44.56 | WoZZeR_ | then just zip it up |
| 02:44.59 | WoZZeR_ | it'll be around 5 meg |
| 02:45.01 | sykosoft | sure |
| 02:45.04 | sykosoft | no problem |
| 02:45.47 | WoZZeR_ | yeah, it doesn't like bs 1024 either |
| 02:46.01 | sykosoft | cat /dev/mtd/mtd0 > /sdcard/imgfs.bin ? |
| 02:46.14 | WoZZeR_ | yeah |
| 02:46.16 | WoZZeR_ | that'll work |
| 02:46.48 | sykosoft | aaaand of course there's no > key |
| 02:46.51 | sykosoft | stand by |
| 02:47.18 | WoZZeR_ | yeah, it may take a while |
| 02:47.23 | WoZZeR_ | good news is, next test can use adb |
| 02:48.21 | sykosoft | ugh |
| 02:48.25 | sykosoft | gonna have to shut down |
| 02:48.26 | sykosoft | and make a script |
| 02:49.09 | sykosoft | I never did understand what you were talking about about the cdma detection message I sent you on ppcgeeks |
| 02:49.27 | sykosoft | cause, if it's 100% cdma all the time, that's a problem for international travellers |
| 02:49.28 | WoZZeR_ | if you want to use GSM on a cdma phone? |
| 02:49.38 | sykosoft | yeah |
| 02:50.03 | WoZZeR_ | it might not |
| 02:50.14 | WoZZeR_ | it may not disable the GSM radio on it |
| 02:50.24 | sykosoft | that....could be interesting |
| 02:50.47 | WoZZeR_ | the GSM is part of the cdma radio, I believe |
| 02:50.57 | WoZZeR_ | not 100% sure until an international person tells me |
| 02:51.32 | sykosoft | I'll be able to tell you in 2 weeks |
| 02:51.35 | sykosoft | going to peru |
| 02:51.38 | WoZZeR_ | cool |
| 02:51.45 | WoZZeR_ | bring a winmo flash with you :P |
| 02:52.08 | WoZZeR_ | you can test it by using a rhod210 or tilt2 nbh |
| 02:52.15 | WoZZeR_ | the keymap won't be right though |
| 02:52.23 | WoZZeR_ | I can make a rom for you if you let me know |
| 02:52.51 | sykosoft | all right |
| 02:52.59 | sykosoft | I was thinking of a userspace script to change it |
| 02:53.00 | sykosoft | on the fly |
| 02:53.09 | sykosoft | or at least |
| 02:53.11 | sykosoft | on next reboot |
| 02:54.33 | Ondalf | so some cdma can use gsm as backup and vice versa? |
| 02:54.33 | WoZZeR_ | damn, I wish dd worked |
| 02:54.37 | WoZZeR_ | would be so much faster |
| 02:54.55 | WoZZeR_ | Ondalf: sort of. the rhodium has both radios, but CDMA is the main one |
| 02:55.04 | WoZZeR_ | unless it's CDMA radio can read GSM as well |
| 02:55.12 | WoZZeR_ | not 100% sure |
| 02:55.34 | Ondalf | sounds pretty nice. never heard non-sim phone to enter gsm band though |
| 02:56.09 | sykosoft | it has a sim |
| 02:56.11 | WoZZeR_ | it has a sim |
| 02:56.13 | sykosoft | it's a world phone, truly |
| 02:56.18 | sykosoft | and is one of the major pulls of this phone |
| 02:56.24 | sykosoft | there is not yet a dual mode android phone |
| 02:56.30 | sykosoft | verizon is getting one (super ugly) |
| 02:56.42 | sykosoft | but, it's why I keep this phone, to have gsm and cdma |
| 02:56.52 | sykosoft | so, android being cdma only is less desirable |
| 02:57.49 | Ondalf | new things everyday |
| 02:58.35 | *** join/#htc-linux warrenb213_ (47ecbad7@gateway/web/freenode/ip.71.236.186.215) |
| 02:58.39 | warrenb213_ | hey guys |
| 02:58.47 | warrenb213_ | im working to compile cm6 |
| 02:59.06 | warrenb213_ | but it seems my ubuntu doesn't know the command PRODUCT_COPY_FILES |
| 02:59.12 | Ondalf | i guess gsm/cdma radio is commanded thru at-commands so decent libril is required. i'm just guessing, don't believe me. |
| 02:59.37 | Ondalf | warrenb213_: i doubt its a command |
| 03:00.08 | Ondalf | its a enviroinment value for something |
| 03:00.19 | Ondalf | *an |
| 03:00.38 | warrenb213_ | hmmmm, curious |
| 03:00.49 | Ondalf | or pointer for command or alias |
| 03:01.14 | sykosoft | *sigh* of fricking course |
| 03:01.19 | sykosoft | ^M everywhere in the file |
| 03:01.43 | warrenb213_ | cause i'm following the directions from the cyanogen wiki. :-\ the extract-files.sh makes reference to it |
| 03:01.49 | warrenb213_ | and errors in the terminal |
| 03:01.50 | warrenb213_ | :-\ |
| 03:03.11 | Ondalf | that command should be in the beginning of .sh file. depends how its made |
| 03:03.44 | Ondalf | are you running it with ./extract-files.sh ? |
| 03:03.56 | warrenb213_ | yes |
| 03:04.34 | warrenb213_ | at the end of that file it also calls setup-makefiles.sh |
| 03:04.42 | warrenb213_ | which also cannot find |
| 03:04.59 | warrenb213_ | PRODUCT_PACKAGES : |
| 03:05.15 | Ondalf | something sounds incomplete there |
| 03:06.12 | warrenb213_ | yes |
| 03:08.23 | sykosoft | finally |
| 03:08.41 | sykosoft | does android have sshd? |
| 03:08.44 | sykosoft | please tell me yes |
| 03:09.05 | Ondalf | D? |
| 03:09.07 | Ondalf | nope |
| 03:09.24 | sykosoft | ok, that means I'm building a gentoo chroot |
| 03:09.37 | Ondalf | dropbox is sshd compiled for arm |
| 03:09.56 | Ondalf | had it on one asus wl500g |
| 03:11.15 | sykosoft | armv7 should run on this, yeah? |
| 03:11.51 | sykosoft | wozzer: how long should this method take? |
| 03:11.53 | sykosoft | just curious |
| 03:12.24 | WoZZeR_ | a few minutes |
| 03:12.28 | WoZZeR_ | depends on the sd card |
| 03:12.32 | WoZZeR_ | it's writing 512 megs to it |
| 03:12.45 | WoZZeR_ | took me 10 minutes on a class 6 |
| 03:12.55 | *** join/#htc-linux sykosoft_ (adf6d4ab@gateway/web/freenode/ip.173.246.212.171) |
| 03:13.21 | sykosoft_ | all right, mine is a class 4 in this phone |
| 03:13.25 | sykosoft_ | I have several rhod 400 |
| 03:13.29 | warrenb213_ | fuckin a :-\ |
| 03:14.27 | WoZZeR_ | skip may have been wrong |
| 03:14.43 | WoZZeR_ | wait, no |
| 03:17.31 | WoZZeR_ | is there a way to find out of a file does not have FF? |
| 03:17.42 | WoZZeR_ | or if it's all not FF's in hex rather |
| 03:19.32 | sykosoft_ | I'm gzipping the image so I can send it to you |
| 03:19.38 | WoZZeR_ | cool |
| 03:19.59 | sykosoft_ | and working on getting ssh going on my rhod |
| 03:20.03 | sykosoft_ | as, doing this by hand is crap |
| 03:20.22 | *** join/#htc-linux mistadman1 (~mistadman@32.171.80.162) |
| 03:20.27 | WoZZeR_ | at one point I created a new telnetd session to the wifi ip |
| 03:20.29 | WoZZeR_ | that worked |
| 03:20.34 | WoZZeR_ | but have not done that in a while |
| 03:22.19 | sykosoft_ | where do you want the file? |
| 03:24.08 | *** join/#htc-linux brnshroom (~shroom.jo@c-76-30-161-228.hsd1.tx.comcast.net) |
| 03:25.09 | WoZZeR_ | mediafire works |
| 03:25.11 | WoZZeR_ | where ever |
| 03:26.50 | *** join/#htc-linux WisTilt2 (~wisgreg@wireless248.wirelesstcp.net) |
| 03:28.04 | WisTilt2 | jonpry: you around to do a test? |
| 03:28.32 | *** join/#htc-linux stevenkrtek (~stevenr@c-71-231-193-24.hsd1.or.comcast.net) |
| 03:28.35 | stevenkrtek | hello |
| 03:28.43 | WoZZeR_ | he's out for a while I think |
| 03:28.45 | WoZZeR_ | he said he'd be back |
| 03:28.49 | stevenkrtek | i need some help with a project |
| 03:29.06 | stevenkrtek | porting android to the HTC Mega |
| 03:29.13 | stevenkrtek | haret doesnt like the msm7225 |
| 03:29.53 | stevenkrtek | will anyone help me please? |
| 03:30.12 | WisTilt2 | hey WoZZer. ok ill be around for awhile. need him to try a microp test in nand to make sure i have all these lights right and not being influenced from wince. |
| 03:30.25 | WoZZeR_ | I don't know if he's doing nand stuff |
| 03:30.35 | WoZZeR_ | unless I missed something |
| 03:30.38 | sykosoft_ | if you give me instructions, I can do it |
| 03:30.42 | sykosoft_ | I'm booted into nand |
| 03:30.49 | WoZZeR_ | he's always done rhobuntu from haret |
| 03:30.50 | sykosoft_ | and will be working on a gentoo chroot |
| 03:30.52 | sykosoft_ | for extra awesome |
| 03:30.58 | stevenkrtek | :/ |
| 03:31.07 | sykosoft_ | IP=`busybox ifconfig tiwlan0 |grep addr |cut -f 2 -d ":" |cut -f 1 -d " " |grep "."|cut -f 1 -d " " |grep -v Ethernet` dropbear -A -N root -U 0 -G 0 -C password -p $IP:22 echo "Dropbear started with IP:"$IP |
| 03:31.09 | WoZZeR_ | sykosoft_: get it uploaded? how big is the file |
| 03:31.10 | sykosoft_ | whoops |
| 03:31.12 | WisTilt2 | thought thats all he's been working on? who's doing the nand kernel stuff? |
| 03:31.23 | stevenkrtek | what are you guys working on? |
| 03:31.30 | WoZZeR_ | maybe he is. As far as I know it was only me and acl actually IN nand |
| 03:31.34 | jonpry | i'm working on the kernel. just have not actually used it |
| 03:31.44 | Captainkrtek | jonpry, kernel for what |
| 03:31.49 | Captainkrtek | im new here |
| 03:31.52 | WoZZeR_ | jonpry: WisTilt2: I need a internal memory address from you |
| 03:31.57 | WisTilt2 | damn, i need to keep who's doing what straight:) |
| 03:32.04 | WoZZeR_ | 128K from 33a0000 |
| 03:32.49 | WisTilt2 | WoZZer you want that from wince or in linux boot? |
| 03:33.00 | WoZZeR_ | doesn't matter, it's the NAND memory |
| 03:33.05 | sykosoft_ | http://www.megaupload.com/?d=ZCTHAI7P |
| 03:33.30 | Captainkrtek | what are you guys working on if i may ask? |
| 03:33.31 | WoZZeR_ | nand storage, rather |
| 03:33.43 | WoZZeR_ | Captainkrtek: 18 different things at once |
| 03:33.47 | Captainkrtek | hahaha |
| 03:33.51 | WisTilt2 | probably easier for jonpry if you need it right away. im configured in my test kernel right now working on these light maps and gpio. |
| 03:33.52 | Captainkrtek | sounds fun |
| 03:33.56 | WoZZeR_ | I'm trying to wrap my head around internal memory right now |
| 03:34.12 | jonpry | wozzer: my calculator says that is 0x33c0000 |
| 03:34.13 | sykosoft_ | curious, anyone know how to make a shell script a "shortcut" in android? |
| 03:34.13 | Captainkrtek | i come in here every once in a while, very smart people in here |
| 03:34.25 | WoZZeR_ | WisTilt2: I need one from tilt2 eventually, I'm just trying see if 33a000 is the start of the imgfs.bin for everyone |
| 03:34.35 | Captainkrtek | skyosoft like a shortcut on the homescreen? |
| 03:34.42 | sykosoft_ | or the launcher |
| 03:34.43 | sykosoft_ | yes |
| 03:34.45 | *** join/#htc-linux shroom2k1 (shroom2k1@c-98-199-8-124.hsd1.tx.comcast.net) |
| 03:34.54 | Captainkrtek | skyosoft i might let me try something on my droid |
| 03:34.55 | WoZZeR_ | jonpry: where did you get that? |
| 03:35.07 | sykosoft_ | if I could do that, I could have ssh access |
| 03:35.12 | WisTilt2 | np give me 30mins and ill boot to normal mode. need jonpry to test a couple bits in microp before i get out of this kernel. |
| 03:35.13 | sykosoft_ | with one touch |
| 03:35.18 | sykosoft_ | which would make me happy |
| 03:35.25 | Captainkrtek | skyosoft in Better Terminal Emulator pro you can |
| 03:35.36 | Captainkrtek | i just made one |
| 03:35.40 | WoZZeR_ | WisTilt2: it's from internal storage, can you get that in windows? |
| 03:35.43 | Captainkrtek | an ssh shortcut to one of my servers |
| 03:36.26 | WoZZeR_ | jonpry: we tried| dd if=/dev/mtd/mtd0 of=/sdcard/imgfs.bin skip=54132736 bs=8192 count=16 |
| 03:36.28 | WoZZeR_ | and it didn't work |
| 03:36.32 | WoZZeR_ | maybe it'll work for rhobuntu |
| 03:36.36 | WisTilt2 | WoZZer: you mean dump that memory while in winmo? yes can do |
| 03:36.43 | Captainkrtek | skyosoft_ you want the .apk for it? |
| 03:36.52 | jonpry | wozzer, i think there is a problem with your command |
| 03:36.56 | sykosoft_ | http://www.absolutelyandroid.com/automating-tasks-with-gscript-an-overview/ |
| 03:37.04 | WoZZeR_ | it just sits there forever |
| 03:37.04 | sykosoft_ | captainkrtek: yes please |
| 03:37.18 | jonpry | skip is in blocks. so you have skipped almost 4gb |
| 03:37.19 | Captainkrtek | skyosoft_ cool article, one sec let me grab it |
| 03:37.33 | jonpry | or 40 |
| 03:37.39 | sykosoft_ | haha |
| 03:37.39 | WoZZeR_ | 6766592 didn't work either |
| 03:37.42 | sykosoft_ | that's a lotta skip |
| 03:38.20 | Captainkrtek | skyosoft_ ill pm you the link |
| 03:38.33 | WoZZeR_ | wait, so I have to divide it by 8192, not 8 |
| 03:38.34 | jonpry | and seek changes the input stream position before copy |
| 03:39.00 | jonpry | skip should == seek in your case |
| 03:39.12 | jonpry | else you will make a 40gb file |
| 03:39.17 | *** join/#htc-linux brnshroom (shroom2k1@c-98-199-8-124.hsd1.tx.comcast.net) |
| 03:39.29 | jonpry | righteo |
| 03:39.59 | WoZZeR_ | so, this should work to get 33a0000? |
| 03:40.07 | WoZZeR_ | su |
| 03:40.07 | WoZZeR_ | modprobe mtdchar |
| 03:40.07 | WoZZeR_ | dd if=/dev/mtd/mtd0 of=/sdcard/imgfs.bin seek=6608 bs=8192 count=16 |
| 03:40.38 | Captainkrtek | skyosoft_ i sent you the link |
| 03:40.43 | jonpry | yes i think so |
| 03:40.48 | WoZZeR_ | testing now |
| 03:41.34 | WoZZeR_ | it seeked to to the right spot |
| 03:41.40 | WoZZeR_ | but the file is way too big |
| 03:42.07 | *** join/#htc-linux bmnbmn (44cc7f6b@gateway/web/freenode/ip.68.204.127.107) |
| 03:44.13 | jonpry | it should be 128kb |
| 03:44.17 | WoZZeR_ | jonpry: let me know when you can run that dd |
| 03:44.24 | WoZZeR_ | that's what I expected, not 52 megs |
| 03:44.29 | WoZZeR_ | rebooting and runnign again |
| 03:44.32 | WoZZeR_ | I may have messed something up |
| 03:44.45 | WoZZeR_ | then try your 33c0000 after |
| 03:45.05 | bmnbmn | any news on the microsd(hc)/class 2 clocks problem? |
| 03:45.09 | WisTilt2 | it sounds like it wrote the seek offset also, which is 54mb |
| 03:45.19 | jonpry | maybe it id skip |
| 03:45.19 | WoZZeR_ | bmnbmn: yes.. don't be a cheap ass |
| 03:45.56 | bmnbmn | ok, no need to be rude |
| 03:46.22 | WoZZeR_ | it was don't be a "cheap ass", not "don't be cheap", ass |
| 03:46.25 | WoZZeR_ | nothing rude in that |
| 03:46.32 | jonpry | lol |
| 03:47.32 | Captainkrtek | can someone help with haret? |
| 03:48.37 | WoZZeR_ | jonpry: skip seemed to work. checking file now |
| 03:49.02 | bmnbmn | i'd rather donate a class 2 card to someone who can diagnose the issue rather than just avoiding it by buying a class 4 |
| 03:50.03 | WoZZeR_ | jonpry: yup, skip worked perfectly |
| 03:50.13 | *** join/#htc-linux shroom2k1 (~shroom.jo@c-76-30-161-228.hsd1.tx.comcast.net) |
| 03:52.09 | bmnbmn | nice work on the USB stuff, who is Alex? |
| 03:52.15 | WoZZeR_ | acl and alex |
| 03:52.22 | WoZZeR_ | everyone but me |
| 03:52.23 | WoZZeR_ | lol |
| 03:52.39 | WoZZeR_ | jonpry did some, I think WisTilt2 did some |
| 03:52.44 | WoZZeR_ | pohket may have |
| 03:53.23 | jonpry | how can i send the file from rhobuntu |
| 03:53.37 | WoZZeR_ | hmmmm |
| 03:53.38 | WoZZeR_ | ftp? |
| 03:54.06 | WoZZeR_ | unless you can just tell me a certain few bytes |
| 03:54.25 | WoZZeR_ | 0x44 from that file |
| 03:54.34 | WoZZeR_ | 44 to 46 |
| 03:54.35 | jonpry | lol |
| 03:55.02 | sykosoft_ | anyone: is there a root password on xandroid? |
| 03:55.06 | sykosoft_ | does anyone know what it is? |
| 03:55.17 | WoZZeR_ | just su |
| 03:55.22 | jonpry | 0000040 0705 1f00 3041 a000 f300 3633 7454 c000 |
| 03:55.31 | sykosoft_ | for remote, like telnetd |
| 03:55.32 | WoZZeR_ | gonna make me convert that to text |
| 03:55.42 | jonpry | no |
| 03:55.49 | jonpry | looking CECE? |
| 03:56.02 | WoZZeR_ | should be LZX or XPR |
| 03:56.05 | Captainkrtek | will anyone help me? |
| 03:56.21 | WoZZeR_ | try 0x33c0000 + 0x44 |
| 03:56.26 | sykosoft_ | captainkrtek: sorry, haven't really used haret for dev purposes yet |
| 03:56.31 | Captainkrtek | okay |
| 03:56.39 | bmnbmn | tell the channel what you need help with and someone might chime in |
| 03:56.44 | Captainkrtek | i did already |
| 03:56.49 | Captainkrtek | im porting android to the mega |
| 03:56.59 | Captainkrtek | and haret is having issues |
| 03:57.03 | jonpry | 00000040 05 07 00 1f 41 30 00 a0 00 f3 33 36 54 74 00 c0 |....A0....36Tt..| |
| 03:57.08 | Captainkrtek | if anyone helps me ill say the technical details |
| 03:57.46 | WoZZeR_ | ok, try your address then. RHOD400 and 500 seem to use 33a0000 |
| 03:58.03 | bmnbmn | Captainkrtek: out of my league, sorry |
| 03:58.12 | Captainkrtek | okay, well thanks anyways |
| 04:00.44 | Captainkrtek | WoZZeR_ would you be able to help? |
| 04:00.56 | WoZZeR_ | Captainkrtek: no, sorry. If I knew I would have chimed in |
| 04:01.15 | Captainkrtek | okay thanks |
| 04:02.27 | *** join/#htc-linux pigeon_ (~pigeon@eth5284.nsw.adsl.internode.on.net) |
| 04:02.52 | *** join/#htc-linux niall0s_ (niall@spoon.netsoc.tcd.ie) |
| 04:03.01 | Captainkrtek | i hate haret :P |
| 04:03.17 | WisTilt2 | jonpry: you have a tilt2 right? |
| 04:03.44 | jonpry | woz: i don't understand why you are looking there |
| 04:03.44 | jonpry | Part00 is the interesting stuff |
| 04:04.15 | *** join/#htc-linux nrirclog887 (~nrirclog@netripper.com) |
| 04:04.24 | bmnbmn | WoZZeR_: is the irq 26 issue speed related, or is it due to sd/sdhc differences? |
| 04:04.29 | bmnbmn | or both |
| 04:04.54 | WoZZeR_ | jonpry: I'm just looking for the start of the imgfs.bin |
| 04:05.00 | WoZZeR_ | it's really easy to find |
| 04:05.06 | WoZZeR_ | and easy to calculate from |
| 04:06.01 | sykosoft_ | sorry, I'm currently distracted with sshd on my phone |
| 04:06.03 | sykosoft_ | it's important to me |
| 04:06.03 | WoZZeR_ | bmnbmn: it's clock issues. It's setting SDHC correctly, but not SD |
| 04:06.05 | sykosoft_ | cause |
| 04:06.06 | sykosoft_ | seriously |
| 04:06.12 | sykosoft_ | typing with the keyboard long commands sucks |
| 04:06.16 | Captainkrtek | skyosoft does it work? |
| 04:06.18 | WoZZeR_ | jonpry: part00 is not interesting |
| 04:06.25 | WoZZeR_ | cause Part01 has your kernel in it |
| 04:07.08 | WoZZeR_ | part00 is the UDL |
| 04:07.42 | sykosoft_ | plus, I want to build a gentoo chroot |
| 04:07.48 | sykosoft_ | then I can have anything I want utility wise |
| 04:07.51 | WoZZeR_ | 33a0000 - 1FDFFFFE seems to be usable area rhods |
| 04:09.13 | bmnbmn | WoZZeR_: thanks |
| 04:09.35 | bmnbmn | i'll make a trip to wally world and see what they have on short notice, i miss not being able to play with xdandroid |
| 04:10.44 | WoZZeR_ | jonpry: can you grep mtd0 with hex values? lol |
| 04:11.33 | *** join/#htc-linux bzo (~chatzilla@c-76-126-175-200.hsd1.ca.comcast.net) |
| 04:11.52 | Captainkrtek | hello bzo |
| 04:12.02 | bzo | hi |
| 04:12.09 | WisTilt2 | WoZZer cant you just objdump mtd0 then pipe grep? |
| 04:12.14 | Captainkrtek | know anything about haret bzo? |
| 04:12.30 | bzo | enough I suppose |
| 04:12.36 | WoZZeR_ | WisTilt2: I'm just trying to find a way for people to find where the imgfs starts |
| 04:12.38 | Captainkrtek | can i PM you? |
| 04:12.42 | WoZZeR_ | since the imgfs uses a header |
| 04:12.57 | WisTilt2 | ah, that should be np |
| 04:13.31 | *** join/#htc-linux mdeejay_ (~mdeejay@188.168.168.101) |
| 04:13.32 | WoZZeR_ | The header is F8 AC 2C 9D E3 D4 2B |
| 04:13.39 | WoZZeR_ | it's actually a lot longer, but that should be enough |
| 04:14.20 | WoZZeR_ | F8 AC 2C 9D E3 D4 2B 4D BD 30 91 6E D8 4F 31 DC |
| 04:15.14 | bmnbmn | WoZZeR_: are you guys working on internal storage stuff? |
| 04:15.17 | WoZZeR_ | yeah |
| 04:15.21 | bmnbmn | ooh |
| 04:15.21 | WoZZeR_ | that's what I'm attempting now |
| 04:15.26 | WoZZeR_ | trying to find the usable range |
| 04:15.34 | WoZZeR_ | RHOD400 and 500 seem to be the same |
| 04:15.39 | bmnbmn | do you have the neccesary info for RHOD400 |
| 04:15.40 | bmnbmn | okay |
| 04:15.47 | WoZZeR_ | look at the thread |
| 04:15.51 | bmnbmn | what thread |
| 04:15.51 | WoZZeR_ | http://forum.ppcgeeks.com/1942057-post241.html |
| 04:15.54 | bmnbmn | thanks |
| 04:15.56 | WoZZeR_ | be the first to do that |
| 04:16.21 | WoZZeR_ | until someone tells me a better way, instead of just checking an address |
| 04:16.26 | WoZZeR_ | WisTilt2: any ideas? |
| 04:17.02 | WisTilt2 | you wanting to search that header from your memory addr above right? |
| 04:17.09 | sykosoft_ | wozzer, would you like a new copy of the file done with that method? |
| 04:17.10 | WoZZeR_ | from nand |
| 04:17.14 | sykosoft_ | or is the one I sent sufficient? |
| 04:17.25 | WoZZeR_ | sykosoft_: no reason unless you want to |
| 04:17.29 | WoZZeR_ | the 512 meg file worked fine |
| 04:17.38 | WisTilt2 | can that be read once booted to linux? |
| 04:17.46 | WoZZeR_ | yeah |
| 04:18.00 | WoZZeR_ | wait, can the address? don't know |
| 04:18.10 | WoZZeR_ | if you can seach mtd0 for a hex string, yes |
| 04:18.19 | WisTilt2 | your 3ca0000(i think that was it) address? |
| 04:18.37 | WoZZeR_ | 33a0000 is the address it is for me |
| 04:18.43 | WoZZeR_ | I want to see if it's different for other people |
| 04:19.15 | WisTilt2 | if the addr is readable once in linux, it would be real easy to code a routine to read and search for that pattern. |
| 04:19.42 | WisTilt2 | hang on let me try that... |
| 04:19.52 | WoZZeR_ | dd if=/dev/mtd/mtd0 of=/sdcard/imgfs.bin skip=6608 bs=8192 count=16 |
| 04:19.59 | WoZZeR_ | that worked, so I'm assuming it's readable |
| 04:20.03 | WoZZeR_ | I also could cat it |
| 04:20.08 | WisTilt2 | wait, before i reboot phone... jonpry are you able to run a quick microp test? |
| 04:20.24 | WoZZeR_ | he's not in nand |
| 04:20.55 | WisTilt2 | thats ok. just need him to verify lights coming on. he can do that in linux |
| 04:21.22 | WisTilt2 | i think the hardspl killed my keyboard light. caps and fn come on but no kbd anymore. |
| 04:22.15 | WoZZeR_ | HSPL should not have. |
| 04:22.20 | WoZZeR_ | I don't see anything saying it could |
| 04:23.15 | WisTilt2 | thats what i need him to verify. dont remember if he has tilt2 though? |
| 04:23.39 | *** join/#htc-linux bmnbmn (44cc7f6b@gateway/web/freenode/ip.68.204.127.107) |
| 04:23.48 | WoZZeR_ | he has a 210 |
| 04:23.50 | WoZZeR_ | t-mo |
| 04:24.13 | WisTilt2 | slide out kbd similar to tilt2? |
| 04:24.23 | WoZZeR_ | same phone |
| 04:24.25 | WoZZeR_ | diff model |
| 04:24.28 | WoZZeR_ | like I have a 500 |
| 04:24.31 | WoZZeR_ | and acl has a 400 |
| 04:24.45 | WoZZeR_ | keymapping is the only difference |
| 04:24.54 | WisTilt2 | do those all have kbd backlight and the caps & fn lights? |
| 04:25.11 | WoZZeR_ | my fn doesn't |
| 04:25.19 | WoZZeR_ | wait |
| 04:25.22 | WoZZeR_ | I think it does |
| 04:25.27 | WoZZeR_ | want me to flash to windows? |
| 04:25.58 | WisTilt2 | you can setup your kernel to do a simple microp test? |
| 04:26.04 | WoZZeR_ | yeah |
| 04:26.06 | sykosoft_ | yay ssh |
| 04:26.14 | WisTilt2 | just need to write a value to one addr |
| 04:26.18 | WoZZeR_ | ok |
| 04:26.24 | WoZZeR_ | just let me know where to put it |
| 04:26.28 | WisTilt2 | to see if the lights come on after bootup. |
| 04:27.19 | WisTilt2 | just microp write to 0x25, value 0x1f and kbd,caps,fn lights should come on. |
| 04:27.30 | WoZZeR_ | how do I do that? |
| 04:27.47 | WoZZeR_ | I said I could run it, not that I knew how, sorry |
| 04:27.57 | sykosoft_ | would anyone like a drop-in ssh that they can execute? |
| 04:28.01 | sykosoft_ | since we don't yet have adb? |
| 04:28.09 | sykosoft_ | (or maybe we do and I just don't know it, but I still prefer ssh) |
| 04:28.12 | WoZZeR_ | sykosoft_: adb soon |
| 04:28.44 | sykosoft_ | I can package this up so you simply run a few commands and have ssh |
| 04:28.49 | WisTilt2 | you'd have to code the routine in kernel. im just testing it using the backlight brightness routine that gets run to turn on screen. |
| 04:29.24 | WoZZeR_ | oh, sorry. I make a good debugger, that's about it |
| 04:30.29 | Captainkrtek | anyone know who i can email for help with this project? |
| 04:30.33 | WisTilt2 | jonpry can do that pretty easy i think:) |
| 04:30.37 | Captainkrtek | i submitted this to the mailing list |
| 04:30.51 | WoZZeR_ | yeah, I R an artard |
| 04:36.40 | *** join/#htc-linux jonpry (~jonpry@63.245.31.4) |
| 04:36.50 | *** join/#htc-linux xawen (~Admin@pool-96-244-250-218.bltmmd.fios.verizon.net) |
| 04:36.51 | *** join/#htc-linux Bry8Star (~Bry8Star@cpe-76-170-247-232.socal.res.rr.com) |
| 04:37.07 | *** join/#htc-linux StummeJ (~StummeJ@dhcp-135-7-149-24.cf-res.cfu.net) |
| 04:37.45 | *** join/#htc-linux mistadman1 (~mistadman@32.171.80.162) |
| 04:38.03 | sykosoft_ | YAY for scp |
| 04:38.48 | Captainkrtek | anyone who just joined good with haret? |
| 04:39.56 | *** join/#htc-linux Kasjopaja23 (~Tina@p57BC037E.dip0.t-ipconnect.de) |
| 04:41.21 | WisTilt2 | WoZZer_ i just started the scan for that header on my phone but looks like its going to take awhile. |
| 04:41.42 | WoZZeR_ | lol, thanks |
| 04:41.50 | WoZZeR_ | should be around 50mb in |
| 04:42.21 | WisTilt2 | using 33a0000 so if thats same on my phone it should find it. |
| 04:43.16 | jonpry | wozzer: i have done some analyzing |
| 04:43.43 | WoZZeR_ | dd if=/dev/mtd/mtd0 bs=8192 count=100 skip=6608 |hexdump -C |grep "f8 ac 2c 9d e3 d4 2b 4d bd 30 91 6e d8 4f 31 dc" |
| 04:43.46 | WoZZeR_ | why doesn't that work |
| 04:44.08 | WoZZeR_ | ohhh, too long for a line |
| 04:44.11 | jonpry | wrap around |
| 04:44.27 | jonpry | is that the sequence you are looking for? |
| 04:44.31 | WisTilt2 | the offsets might not be correct unless the header actually has 0x20 spaces in it like your search string |
| 04:44.31 | sykosoft_ | anyone know why I'm getting: |
| 04:44.32 | sykosoft_ | # losetup /dev/loop1 /sdcard/gentoo/gentoo.img losetup: /dev/loop1 # mke2fs /dev/loop1 mke2fs: can't format mounted filesystem |
| 04:44.45 | WoZZeR_ | jonpry: try this- dd if=/dev/mtd/mtd0 bs=8192 count=1000 skip=6608 |hexdump -C |grep "f8 ac 2c 9d e3 d4 2b 4d" |
| 04:44.57 | WoZZeR_ | should scan 8 megs |
| 04:45.11 | WoZZeR_ | I think |
| 04:45.12 | WoZZeR_ | lol |
| 04:45.50 | jonpry | i can search like that in ghex2 |
| 04:45.52 | WisTilt2 | that wont work. hexdump is going to have address offsets at start of each line also |
| 04:45.55 | jonpry | not found |
| 04:46.11 | WoZZeR_ | WisTilt2: it worked for me |
| 04:46.23 | WoZZeR_ | I would assume that would start it at a 00000 region |
| 04:46.23 | WisTilt2 | does the string have actual spaces in it? |
| 04:46.27 | jonpry | so i've determined that not only is part0 located in different place. but it is also substantially different |
| 04:46.30 | WoZZeR_ | the hex does |
| 04:46.35 | jonpry | like unrecognizable |
| 04:46.42 | *** join/#htc-linux g55 (~g55@rgnb-5d878963.pool.mediaWays.net) |
| 04:46.48 | WoZZeR_ | jonpry: the part00 is the UDL part from M$ |
| 04:46.53 | WoZZeR_ | it's unused |
| 04:47.01 | WoZZeR_ | part01 is the xip |
| 04:47.04 | WoZZeR_ | which has our kernel |
| 04:47.09 | jonpry | i think your wrong there :-) |
| 04:47.11 | WoZZeR_ | no |
| 04:47.14 | WoZZeR_ | I know I'm right |
| 04:47.17 | jonpry | UDL is what is loading your kernel |
| 04:47.19 | WoZZeR_ | no |
| 04:47.20 | WoZZeR_ | XIP is |
| 04:47.27 | WoZZeR_ | well |
| 04:47.29 | WoZZeR_ | it's in XIP area |
| 04:47.38 | WoZZeR_ | the actual kernel is in the xip area |
| 04:48.00 | jonpry | precisely. so first thing UDL does is load up XIP into ram and then jump to it. your stuff is there. so it gets loaded and run |
| 04:48.02 | bmnbmn | WoZZeR_: replied to your thread with attachment |
| 04:48.15 | WoZZeR_ | ULDR* |
| 04:48.22 | WoZZeR_ | yeah |
| 04:48.32 | WoZZeR_ | so we should not touch those areas |
| 04:48.35 | jonpry | thats why tinboot has got no code for nand |
| 04:48.48 | WoZZeR_ | tinboot uses cmdline for nand |
| 04:49.17 | jonpry | thats fine. its just that i cannot locate the gsm entry point because it doesn't remotely resemble cdma |
| 04:49.31 | WoZZeR_ | bmnbmn: ahh crap |
| 04:49.32 | WoZZeR_ | that didn't work |
| 04:49.42 | WoZZeR_ | waaay too much data |
| 04:49.47 | WoZZeR_ | wait |
| 04:49.47 | WoZZeR_ | no |
| 04:49.57 | jonpry | that is also why your kernel+tinboot has some weirdo limit on size. your stuck with whatever UDL thinks the size of XIP is |
| 04:50.11 | jonpry | *kernel+initrd |
| 04:50.27 | WoZZeR_ | jonpry: nope, I can boot any size I want |
| 04:50.35 | WoZZeR_ | I just change the size in tinboot |
| 04:50.39 | *** join/#htc-linux _friehmaen (freeman@xers.de) |
| 04:50.48 | WoZZeR_ | .equXIP_END,0x0100000 |
| 04:51.11 | *** join/#htc-linux an0key_ (~an0key@n0rty.an0key.net) |
| 04:51.14 | bmnbmn | I zipped it due to file name restrictions on the forum |
| 04:51.19 | *** join/#htc-linux krog271 (~wurst@profila.de) |
| 04:51.22 | bmnbmn | obviously |
| 04:51.35 | Captainkrtek | hey an0key and krog271 |
| 04:52.22 | WoZZeR_ | bmnbmn: type this dd if=/dev/mtd/mtd0 bs=8192 count=1000 skip=6608 |hexdump -C |grep "f8 ac 2c 9d e3 d4 2b 4d" |
| 04:52.26 | WoZZeR_ | and see what comes up |
| 04:52.28 | WoZZeR_ | brb |
| 04:52.42 | bmnbmn | ok, let me boot |
| 04:53.10 | sykosoft_ | *sigh* busybox |
| 04:53.31 | jonpry | ok. i just don't understand what you are looking for |
| 04:54.09 | *** join/#htc-linux CazH (~quassel@3007ds2-rd.0.fullrate.dk) |
| 04:55.03 | jonpry | woz: i have something about xpr near 0x3000000 |
| 04:55.26 | sykosoft_ | I don't think that dd command is going to work |
| 04:55.32 | *** join/#htc-linux liamsmit1uk (~Liam@host86-152-231-220.range86-152.btcentralplus.com) |
| 04:55.50 | *** join/#htc-linux lenix- (~irc@lenix.de) |
| 04:56.19 | jonpry | however, neomatrix does not |
| 04:56.34 | jonpry | he has MSFLSH50 at that address |
| 04:56.37 | sykosoft_ | nevermind |
| 04:56.38 | sykosoft_ | but |
| 04:56.39 | bmnbmn | WoZZeR_: |
| 04:56.41 | bmnbmn | 001c7020 47 00 46 00 53 00 00 00 f8 ac 2c 9d e3 d4 2b 4d |G.F.S.....,...+M| |
| 04:56.48 | bmnbmn | 00480000 f8 ac 2c 9d e3 d4 2b 4d bd 30 91 6e d8 4f 31 dc |..,...+M.0.n.O1.| |
| 04:56.52 | bmnbmn | still searching |
| 04:56.58 | bmnbmn | ok its done |
| 04:57.12 | sykosoft_ | for me I got this |
| 04:57.12 | sykosoft_ | 00000000 f8 ac 2c 9d e3 d4 2b 4d bd 30 91 6e d8 4f 31 dc |..,...+M.0.n.O1.| |
| 04:57.37 | bmnbmn | sykosoft_: what model? |
| 04:57.40 | sykosoft_ | rhod400 |
| 04:57.48 | bmnbmn | neat |
| 04:58.43 | sykosoft_ | mmmm bogomips for breakfast |
| 05:00.44 | WoZZeR_ | jonpry: I'm looking for the start of the imgfs |
| 05:00.48 | bmnbmn | two locations is probably not a good thing, since hes looking for one particular string |
| 05:01.01 | WoZZeR_ | jonpry: bmn has a start of 480000 |
| 05:01.14 | bmnbmn | cant always count on it being the last search result either |
| 05:01.25 | bmnbmn | or can you? |
| 05:01.50 | jonpry | wozzer. you made him skip to far |
| 05:01.50 | WoZZeR_ | well, it doesn't make sense at 1c7020 |
| 05:01.52 | *** join/#htc-linux myn (cereal@cpe-71-64-8-228.insight.res.rr.com) |
| 05:01.52 | *** join/#htc-linux parmaster (par@dipole.idlepattern.com) |
| 05:02.09 | *** join/#htc-linux xawen (~Admin@pool-96-244-250-218.bltmmd.fios.verizon.net) |
| 05:02.10 | WoZZeR_ | ohh |
| 05:02.24 | jonpry | on 210. img is at 0x300000 |
| 05:02.35 | jonpry | *0x3000000 |
| 05:03.46 | WoZZeR_ | dd if=/dev/mtd/mtd0 bs=8192 count=10000 |hexdump -C |grep "f8 ac 2c 9d e3 d4 2b 4d" |
| 05:04.03 | WoZZeR_ | that doesn't seem right |
| 05:04.14 | bmnbmn | 03139020 47 00 46 00 53 00 00 00 f8 ac 2c 9d e3 d4 2b 4d |G.F.S.....,...+M| |
| 05:04.22 | bmnbmn | 03567020 47 00 46 00 53 00 00 00 f8 ac 2c 9d e3 d4 2b 4d |G.F.S.....,...+M| |
| 05:04.22 | WoZZeR_ | wait, no, it's fine |
| 05:04.30 | bmnbmn | 03820000 f8 ac 2c 9d e3 d4 2b 4d bd 30 91 6e d8 4f 31 dc |..,...+M.0.n.O1.| |
| 05:04.31 | bmnbmn | there it is |
| 05:04.52 | jonpry | that sounds more reasonable |
| 05:05.44 | WoZZeR_ | mine is at 33a0000 |
| 05:05.48 | WoZZeR_ | but I did a task 29 first |
| 05:05.52 | WoZZeR_ | to wipe everything |
| 05:05.57 | WoZZeR_ | so I shouldn't only have 1 |
| 05:05.57 | jonpry | different roms :-) |
| 05:06.17 | *** join/#htc-linux antoszka (~antoszka@unaffiliated/antoszka) |
| 05:06.24 | bmnbmn | stock sprint MR1 winmo rom for me |
| 05:06.33 | WoZZeR_ | jonpry: custom rom? |
| 05:06.48 | WoZZeR_ | or maybe smaller radio |
| 05:06.51 | jonpry | energyrom wm6.5 gsm |
| 05:06.59 | WoZZeR_ | jonpry: ahh, that makes sense then |
| 05:07.03 | WoZZeR_ | he has a smaller xip |
| 05:07.22 | WoZZeR_ | stock roms have a larger xip |
| 05:07.28 | jonpry | 02a79020 47 00 46 00 53 00 00 00 f8 ac 2c 9d e3 d4 2b 4d |G.F.S.....,...+M| |
| 05:08.04 | jonpry | i'm not sure how this helps to locate the beginning of XIP. |
| 05:08.26 | WoZZeR_ | I'm looking for the beggining of the imgfs |
| 05:08.27 | WoZZeR_ | not xip |
| 05:08.49 | jonpry | i know. its just that imho that is not very interesting to know |
| 05:09.07 | WoZZeR_ | it's the safest place to start the root, system and userdata partitions |
| 05:09.12 | jonpry | can't make an mtd for kernel and initrd unless you know where it is |
| 05:09.30 | WoZZeR_ | don't need to |
| 05:09.33 | WoZZeR_ | kernel loads fine as is |
| 05:09.39 | jonpry | argh |
| 05:09.59 | WoZZeR_ | ?? |
| 05:10.27 | bmnbmn | hey jonpry, you did the psfreedom stuff for the rhodium/etc? |
| 05:11.13 | jonpry | can't upgrade kernel without it. if you look at tinboot source. first mtd it sets up it "boot". supposed to be kernel and initrd. doesn't work. but that seems to be how things are done |
| 05:11.35 | jonpry | bmnbmn: i did the kernel driver. other guy patched psfreedom |
| 05:11.51 | bmnbmn | thanks for that |
| 05:11.59 | WoZZeR_ | jonpry: I think we are going after different things |
| 05:15.29 | WoZZeR_ | you want to update the kernel from with android, that's what you are trying to do, right? |
| 05:16.48 | jonpry | if i had my way kernel would be in yaffs anyways |
| 05:17.11 | jonpry | if you just want to make it work. put rootfs at 64mb |
| 05:17.35 | WoZZeR_ | mtdparts=msm_nand:0x10000000@0x0(nand)ro,0x00040000@0x04000000(root),0x066C0000@0x04040000(system),0x06f60000@0xA700000(userdata)" |
| 05:17.39 | WoZZeR_ | that's what I was doing right now |
| 05:19.28 | jonpry | now for the second problem. how are you going to get than in an nbh? |
| 05:19.48 | WoZZeR_ | I was going to have it install from the sd card for now |
| 05:21.03 | jonpry | sounds good to me |
| 05:21.15 | WoZZeR_ | no point in making it too complicated |
| 05:21.36 | WoZZeR_ | I can do it for the androidinstall.tar.gz easily |
| 05:21.43 | WoZZeR_ | gotta figure it out for the .ext2 version |
| 05:22.42 | jonpry | i dunno what that is |
| 05:22.55 | WoZZeR_ | the official version |
| 05:23.01 | WoZZeR_ | that some as system.ext2 |
| 05:23.47 | jonpry | i'm guessing you mount it loopback and copy the files |
| 05:24.28 | WoZZeR_ | if the system.ext2 is the /system partition, it's easy |
| 05:24.38 | WoZZeR_ | and data.img can probable be /data |
| 05:24.44 | WoZZeR_ | not 100% sure though |
| 05:26.00 | WoZZeR_ | time to figure out how to get flash_eraseall into the initrd |
| 05:26.42 | WoZZeR_ | ok, wish me luck... going to try the vogue linux initrd |
| 05:26.45 | WoZZeR_ | it has all that in it |
| 05:26.51 | bmnbmn | go go go |
| 05:28.42 | WisTilt2 | jonpry: while Woz is doing that you feel like testing this microp lights? |
| 05:29.14 | *** join/#htc-linux kiozen (~kiozen@rgnb-5d879642.pool.mediaWays.net) |
| 05:29.23 | jonpry | sure |
| 05:29.36 | WisTilt2 | you have caps and fn lights on your kbd? |
| 05:29.51 | jonpry | yes |
| 05:30.05 | bzo | WoZZeR_ that's where our initrd originally came from |
| 05:30.05 | jonpry | btw. can you check our dsp tables for camera? |
| 05:30.22 | WisTilt2 | you need to add a few lines of code in microp-klt.c |
| 05:30.23 | bzo | in fact I think it still prints "vogue" when it starts up :) |
| 05:30.26 | WoZZeR_ | bzo: yeah, I kinda figured. but they've been updating it as well |
| 05:30.31 | WoZZeR_ | it does still say vogue |
| 05:30.35 | bzo | lol |
| 05:30.59 | bzo | yeah, I looked into copying over a newer version a while back |
| 05:31.07 | bzo | their startup menu is nice |
| 05:31.15 | bzo | but you will have to merge all our specific crap into it |
| 05:31.21 | WisTilt2 | jonpry: where are the tables, ill have to look at them at office on monday. |
| 05:31.38 | jonpry | same old stuff in adsp_6125.c |
| 05:31.54 | WoZZeR_ | bzo: I used it for the original nand booting |
| 05:32.00 | WoZZeR_ | the menu is not intuitive |
| 05:32.13 | jonpry | wistilt2: we just have enough of it now for sound. video and cam are still all wrong |
| 05:32.13 | WoZZeR_ | with clicking ont he left and right part of the screen |
| 05:32.17 | WisTilt2 | yeah still have some stuff not right in there. combo table is ok i know but some others arent. |
| 05:32.57 | WisTilt2 | something is not right also because when sound was fixed it should be using image0 and its using combo |
| 05:33.04 | bzo | WoZZeR_: yeah, that was actually a workaround to support non-vogue devices. Originally it was designed for the vogue direction pad |
| 05:33.17 | jonpry | image0 and combo are the same no? |
| 05:33.30 | WoZZeR_ | bzo: that's kinda what I figured |
| 05:33.45 | WisTilt2 | in the current 6125 file they are but they arent supposed to be. |
| 05:33.54 | WisTilt2 | looks like they were just duplicated |
| 05:35.28 | WisTilt2 | sound is using combo table but i need to look at docs on that again. image0 should be sound, video and media should use combo i think. |
| 05:35.34 | jonpry | what does combo do? is it like a different firmware image on adsp? |
| 05:36.30 | jonpry | btw. what is VFE? |
| 05:37.30 | sykosoft_ | just curious if anyone knows what causes sleep of death? |
| 05:37.34 | WoZZeR_ | how do I get mtd to show up without having to modprobe it? |
| 05:37.36 | sykosoft_ | it's weird |
| 05:37.47 | sykosoft_ | if I push the end key on off a few times |
| 05:37.48 | jonpry | wozzer: build it into kernel |
| 05:37.49 | sykosoft_ | it locks up |
| 05:37.53 | WoZZeR_ | CONFIG_MTD_CHAR=y |
| 05:37.54 | WoZZeR_ | II have that |
| 05:38.03 | jonpry | not =m? |
| 05:38.06 | WoZZeR_ | had m |
| 05:38.09 | WoZZeR_ | before |
| 05:38.13 | WoZZeR_ | still had to modprobe |
| 05:38.27 | jonpry | it could be loaded, just no dev entry |
| 05:38.50 | WoZZeR_ | trying to not edit the initrd |
| 05:40.03 | bmnbmn | might have to mknod? |
| 05:40.36 | jonpry | afaik that cmdline partition stuff does not work |
| 05:41.06 | WoZZeR_ | it set it up correctly |
| 05:41.18 | WoZZeR_ | when I had the mtd parts, cat /proc/mtd had the correct names |
| 05:41.31 | WoZZeR_ | but they did not exist until I modprobe'd |
| 05:42.07 | WisTilt2 | jonpry: VFE = Video Front End |
| 05:42.21 | WisTilt2 | you digging into camera? |
| 05:42.56 | jonpry | a little. in theory we don't have to do much because of userland drivers |
| 05:44.37 | WisTilt2 | on this microp test, you'll have to add this into microp-klt.c - |
| 05:45.12 | WisTilt2 | in the micropklt_led_brightness_set func |
| 05:45.33 | jonpry | wozzer: you have CONFIG_MTD_PARTITIONS? |
| 05:46.05 | WisTilt2 | within the if (idx == 6+8) add this: |
| 05:46.22 | WoZZeR_ | CONFIG_MTD_PARTITIONS=y |
| 05:46.36 | WisTilt2 | buffer[0]=0x25 |
| 05:46.46 | WisTilt2 | buffer[1]=0x0f |
| 05:47.08 | WisTilt2 | micropklt_write(client, buffer, 32; |
| 05:47.18 | WisTilt2 | not 32, 2 |
| 05:47.55 | WisTilt2 | that should turn on kbd backlight, caps, fn lights at boot and leave them on. |
| 05:48.29 | jonpry | thats my magic audio address |
| 05:48.41 | WisTilt2 | since i hard spl my kbd backlight no longer works but the others do |
| 05:48.52 | WisTilt2 | magic audio? |
| 05:49.11 | jonpry | it turns on a1010 and adc3001 |
| 05:49.30 | WisTilt2 | you have a rhod right? |
| 05:49.52 | jonpry | yeah |
| 05:50.13 | jonpry | and the light on the back for speaker phone |
| 05:50.15 | WisTilt2 | microp 0x25 is light control only afaik |
| 05:50.26 | jonpry | well its not |
| 05:50.33 | WisTilt2 | which bit is the light speaker |
| 05:51.37 | jonpry | 0x40,0x10,and 0x4. are involved. 2 are resets on the audio chips. 1 is the light. not sure which one is which |
| 05:52.12 | jonpry | i told you about this stuff back in the day :p |
| 05:53.48 | WisTilt2 | well on the tilt2 its different then. 0x25 controls kbd related lights. bit 0 - caps light, bit 1 - fn, bit 3 - kbd light |
| 05:54.17 | jonpry | how is does that preclude the audio resets? its just gpo |
| 05:54.51 | *** join/#htc-linux babijoee (~babijoee_@d110-33-179-230.sun801.vic.optusnet.com.au) |
| 05:55.23 | WisTilt2 | are you writing 2 or 3 bytes when doing audio? |
| 05:55.29 | WisTilt2 | to 0x25 |
| 05:55.33 | jonpry | 1. reg and val |
| 05:56.05 | *** join/#htc-linux camro (~camro@89-104-29-101.customer.bnet.at) |
| 05:56.12 | WisTilt2 | same for lights. can you try and see if your lights come on? |
| 05:57.00 | jonpry | i'm just saying bit 2 is audio. which you don't have in your list. and bit 8, and bit 10 |
| 05:57.06 | WisTilt2 | kbd light should be full on. it is controlled differently though in reality since it has brightness levels also like lcd does. |
| 05:57.58 | jonpry | its building |
| 05:58.12 | WisTilt2 | no bit 10 in single byte |
| 05:58.37 | jonpry | :p. 4 and 6 |
| 05:59.03 | WisTilt2 | im looking at 0-7 single bits:) |
| 05:59.41 | WisTilt2 | wow a 10,000lb bar of chocolate just made record book. |
| 05:59.57 | bmnbmn | keyboard backlight has brightness levels? |
| 06:00.20 | WisTilt2 | on tilt2 it does, dont know anything about other devices. |
| 06:00.30 | bmnbmn | neat |
| 06:00.37 | jonpry | hmm |
| 06:00.50 | jonpry | will anything try to turn these lights on in rhobuntu? |
| 06:01.50 | WisTilt2 | should if you have the code in microp-klt and called. did they come on? |
| 06:02.05 | jonpry | no but there is a bug in the code |
| 06:02.33 | jonpry | i just don't know what would call that code in rhobuntu |
| 06:03.19 | *** join/#htc-linux NeoMatrixJR (~chatzilla@173-25-51-102.client.mchsi.com) |
| 06:03.32 | WisTilt2 | im using the linux-on-qual stuff. you should be able to hard code microp call anywhere after kernel loads. |
| 06:04.06 | jonpry | i'm sure it works |
| 06:04.09 | WisTilt2 | you're calling the same microp write for the audio aren't you? |
| 06:04.17 | WisTilt2 | or speaker light |
| 06:04.39 | jonpry | speaker light just happened while i was making audio work |
| 06:04.46 | WisTilt2 | just OR those bits and viola |
| 06:05.14 | jonpry | you wouldn't happen to know what bit is what light? |
| 06:06.18 | WisTilt2 | bit 0 = caps bit 1 = fn bit 3 = kbd. you have to have kbd brightness at full though and i will have to search for that because dont remember offhand. |
| 06:08.39 | jonpry | wozzer are you yaffs enabled yet? |
| 06:08.43 | *** join/#htc-linux kiozen (~kiozen@rgnb-5d879642.pool.mediaWays.net) |
| 06:09.34 | jonpry | still no lights |
| 06:10.16 | jonpry | 2 lights |
| 06:10.38 | jonpry | no kbd backlight |
| 06:10.49 | WisTilt2 | but the caps and fn did come on? |
| 06:10.55 | jonpry | yes |
| 06:11.27 | WisTilt2 | does your phone have brightness levels for kbd like tilt2? |
| 06:11.45 | jonpry | in winmo it does |
| 06:12.19 | jonpry | is there some setting in android i am supposed to be changing? |
| 06:12.27 | WisTilt2 | ok so its same. default has brightness register at 0 so it wont come on until set. |
| 06:13.11 | WisTilt2 | probably eventually. ive only been hard testing this stuff in kernel then move to appropriate android areas later. |
| 06:13.51 | jonpry | so you can control the brightness of kbd? and it works? |
| 06:13.52 | *** join/#htc-linux dekar_ (~dekar@drms-4d01459d.pool.mediaWays.net) |
| 06:14.15 | WisTilt2 | yep just like the lcd display. |
| 06:14.39 | jonpry | cool |
| 06:15.21 | WisTilt2 | when you slide open your kbd in winmo you should see if go from dim to bright quickly. i think there are 10 steps just like screen. |
| 06:15.46 | jonpry | sounds right |
| 06:16.27 | WisTilt2 | i locked mine at 5 for testing way back when but need to implement the full range. |
| 06:16.44 | jonpry | there was somebody working on a fake multitouch driver. i might need to look into that :-) |
| 06:18.24 | WisTilt2 | lots can be done. ok i need to hit the sack. early auction im going to tomorrow so catch you tomorrow night. |
| 06:18.30 | jonpry | cya |
| 06:20.36 | *** join/#htc-linux hyperfire21 (~nun@c-98-223-15-190.hsd1.il.comcast.net) |
| 06:21.38 | WoZZeR_ | jonpry: how would I mknod for the blocks? |
| 06:21.56 | WoZZeR_ | since the kernel doesn't seem to want to make them |
| 06:22.08 | jonpry | is char working? |
| 06:22.24 | WoZZeR_ | don't know, let me throw a test cat in the initrd |
| 06:23.19 | jonpry | mknod /dev/mtdblock0 b 31 0 |
| 06:23.33 | jonpry | mknod /dev/mtdblock1 b 31 1 |
| 06:23.35 | jonpry | etc |
| 06:23.38 | WoZZeR_ | ok |
| 06:23.46 | WoZZeR_ | thx, I'llt ry that |
| 06:24.47 | WoZZeR_ | can't open /proc/mtd |
| 06:25.07 | jonpry | ? |
| 06:25.23 | WoZZeR_ | no device |
| 06:25.26 | jonpry | you modprobe the mtdblock driver? |
| 06:25.36 | WoZZeR_ | can't modprobe in initrd |
| 06:25.45 | WoZZeR_ | or that early |
| 06:25.47 | jonpry | build in mtdblock? |
| 06:25.50 | WoZZeR_ | at least.. I tried |
| 06:26.41 | jonpry | you should be able to insmod provided the modules are in the initrd or otherwise mounted |
| 06:26.53 | WoZZeR_ | modules are not mounted |
| 06:27.28 | WoZZeR_ | mknod didn't work |
| 06:28.15 | jonpry | for char or dev? |
| 06:28.34 | jonpry | er block |
| 06:28.37 | WoZZeR_ | block |
| 06:28.52 | jonpry | there are some other drivers involved |
| 06:28.56 | WoZZeR_ | I have mounting /dev/block/mtdblock2 on /system |
| 06:29.01 | WoZZeR_ | no such device |
| 06:29.17 | jonpry | that is what you mknod'd? |
| 06:29.21 | WoZZeR_ | yeah |
| 06:29.27 | WoZZeR_ | mknod /dev/mtdblock2 b 31 2 |
| 06:29.33 | WoZZeR_ | oh |
| 06:29.34 | WoZZeR_ | crap |
| 06:29.36 | WoZZeR_ | not in /blcok |
| 06:29.48 | bmnbmn | haha |
| 06:29.50 | jonpry | i was wondering... |
| 06:30.25 | jonpry | you already did flash_erase and mkyaff2? |
| 06:30.49 | WoZZeR_ | the install does that |
| 06:30.53 | WoZZeR_ | which is a different issue |
| 06:33.02 | jonpry | mtdblock seems to require mtdblk_devs |
| 06:33.16 | jonpry | er mtd_blkdevs |
| 06:33.25 | WoZZeR_ | in config? |
| 06:33.32 | jonpry | yeah |
| 06:33.56 | jonpry | its probably managed by config though |
| 06:35.28 | WoZZeR_ | CONFIG_BLK_DEV=y |
| 06:35.52 | jonpry | mtd_blk |
| 06:35.57 | WoZZeR_ | don't see it |
| 06:37.05 | jonpry | ONFIG_MTD_BLKDEVS=y |
| 06:37.08 | jonpry | *C |
| 06:37.22 | jonpry | i have it in my config |
| 06:37.43 | jonpry | can always just add it |
| 06:37.57 | WoZZeR_ | CONFIG_MTD_BLKDEVS=m |
| 06:38.01 | WoZZeR_ | had it |
| 06:38.27 | WoZZeR_ | hmm, maybe it was creating it |
| 06:38.28 | jonpry | well build it in |
| 06:38.36 | WoZZeR_ | change to y? |
| 06:38.42 | jonpry | yeah |
| 06:39.03 | jonpry | along with MTD_BLOCK |
| 06:41.36 | WoZZeR_ | ./sys/block/mtdblock1 |
| 06:41.40 | WoZZeR_ | it should create that as well |
| 06:41.41 | WoZZeR_ | right? |
| 06:42.40 | jonpry | i think so |
| 06:45.28 | jonpry | no go? |
| 06:46.02 | WoZZeR_ | gonna boot back to a working rom to see if it's there without modprobing |
| 06:46.06 | WoZZeR_ | this initrd is a pain |
| 06:56.12 | WoZZeR_ | I threw ls /dev/block/ and /sys/block in the initrd |
| 06:56.56 | WoZZeR_ | it's in /dev, but not in /sys |
| 07:00.16 | WoZZeR_ | it didn't create block0 |
| 07:02.22 | jonpry | so it works? |
| 07:02.29 | WoZZeR_ | yeah |
| 07:02.32 | WoZZeR_ | I guess |
| 07:02.57 | WoZZeR_ | if [ -d /dev/block/mtdblock1 ] ; then |
| 07:03.01 | WoZZeR_ | that wasn't seeing it... |
| 07:03.07 | jonpry | hmm. can you mount the nand? |
| 07:03.48 | jonpry | i think we need this: https://www.codeaurora.org/gitweb/quic/chrome/?p=kernel.git;a=blob;f=drivers/mtd/devices/msm_nand.c;h=2e53f5d1673ab78b2f7326af9ebf183b1c015ce2;hb=2e53f5d1673ab78b2f7326af9ebf183b1c015ce2 |
| 07:03.57 | jonpry | some people disagree :p |
| 07:04.29 | WoZZeR_ | if I do this in the initrd - ls -l /dev/block/ |
| 07:04.33 | WoZZeR_ | and mtdblock1 comes up |
| 07:04.37 | WoZZeR_ | if [ -d /dev/block/mtdblock1 ] ; then |
| 07:04.40 | WoZZeR_ | why is that not catching it |
| 07:05.33 | *** join/#htc-linux jonolo (~jonolo@host-87-75-139-17.dslgb.com) |
| 07:06.13 | WoZZeR_ | oh, it's not a directory, right? |
| 07:06.30 | jonpry | yeah i guess. i don't know any sh |
| 07:06.55 | bmnbmn | WoZZeR_: , right |
| 07:08.25 | jonpry | -r seems to work |
| 07:10.27 | sykosoft_ | mmm gentoo |
| 07:10.34 | sykosoft_ | but sadly, lots of illegal instructions |
| 07:10.39 | sykosoft_ | this is armv6, yes? |
| 07:10.50 | bmnbmn | jonpry, cant you use -b? since its a block special file |
| 07:10.56 | bmnbmn | err wozzer |
| 07:11.04 | WoZZeR_ | I can try |
| 07:11.18 | jonpry | armv6t no vfp |
| 07:12.21 | sykosoft_ | does armv6t have all the instructions of arm5? |
| 07:13.06 | sykosoft_ | as in, what's the lowest common denominator? |
| 07:13.23 | sykosoft_ | this gentoo is built for armv6j |
| 07:13.41 | WoZZeR_ | jonpry: CONFIG_MTD_CHAR=y is that all I need for mtd2? |
| 07:17.57 | jonpry | should be |
| 07:17.57 | bmnbmn | lots of fun stuff on http://www.linux-mtd.infradead.org/doc/nand.html |
| 07:18.17 | WoZZeR_ | going to a working initrd and just gonna test in android now |
| 07:18.24 | WoZZeR_ | flash_eraseall /dev/mtd/mtd2 > /dev/null |
| 07:18.28 | jonpry | armv5te is what rhobuntu is built with |
| 07:18.33 | WoZZeR_ | that gave me no device or address |
| 07:18.36 | WoZZeR_ | from initrd |
| 07:19.07 | jonpry | you mknod mtd2? |
| 07:19.14 | WoZZeR_ | no |
| 07:19.32 | WoZZeR_ | it said it was in /dev/mtd |
| 07:19.32 | jonpry | they are odds or something too |
| 07:19.51 | jonpry | ls -l it |
| 07:21.29 | jonpry | its like mtd0 is c 90 0. and mtd1 is c 90 2 |
| 07:21.41 | jonpry | mtd2 is c 90 4 |
| 07:24.18 | bmnbmn | jonpry, is flashcp only for nor? |
| 07:24.39 | bmnbmn | from mtd utils |
| 07:24.58 | jonpry | dunno. |
| 07:25.36 | WoZZeR_ | I'm not getting mtd blocks or chars now |
| 07:25.39 | WoZZeR_ | with a fresh install |
| 07:26.14 | jonpry | i'm out. cya |
| 07:26.18 | WoZZeR_ | night |
| 07:26.37 | bmnbmn | night |
| 07:26.56 | WoZZeR_ | ahh |
| 07:26.59 | WoZZeR_ | they are in makedevs |
| 07:27.04 | WoZZeR_ | wait, no |
| 07:31.33 | *** join/#htc-linux jonolo (~jonolo@87.75.139.17) |
| 07:47.22 | *** join/#htc-linux LeTama (~IceChat7@vau06-1-82-228-252-90.fbx.proxad.net) |
| 07:49.02 | Rajko | what file is the compass driver in |
| 07:50.25 | *** join/#htc-linux Markinus (~Miranda@gtng-4db045a3.pool.mediaWays.net) |
| 07:51.20 | *** join/#htc-linux warrenb213_ (47ecbad7@gateway/web/freenode/ip.71.236.186.215) |
| 07:52.53 | warrenb213_ | anyone familiar with compiling cm6 rom from source? |
| 08:01.53 | *** join/#htc-linux Regulator (~duffman@c-68-51-38-96.hsd1.ar.comcast.net) |
| 08:10.15 | sykosoft_ | just out of curiousity |
| 08:10.31 | sykosoft_ | is the plan to eventually migrate these device specific fixes to mainline kernel.org? |
| 08:14.22 | *** join/#htc-linux M1DLGpc (~M1DLGpc@bb-87-81-252-83.ukonline.co.uk) |
| 08:25.49 | *** join/#htc-linux LordDeath (~LordDeath@cable-81-173-164-118.netcologne.de) |
| 08:28.19 | *** join/#htc-linux luc_ (5e3edc93@gateway/web/freenode/ip.94.62.220.147) |
| 08:32.14 | *** join/#htc-linux drfosters (~drfosters@173-115-94-126.pools.spcsdns.net) |
| 08:34.29 | drfosters | anybody awake? |
| 08:34.41 | luc_ | me |
| 08:34.45 | luc_ | :) |
| 08:35.18 | drfosters | I read in the logs that usb is working is this true? |
| 08:35.36 | luc_ | hd2 |
| 08:35.42 | *** join/#htc-linux Timber (~Tim@cable-86-56-42-159.cust.telecolumbus.net) |
| 08:36.26 | drfosters | Thanks just wanted to confirm, it was not clear |
| 08:40.48 | drfosters | have you seen the workaround to enable speakerphone during call on the rhodium? |
| 08:40.53 | *** join/#htc-linux Andreyxxl[HD2EU] (~Andreyxxl@89.32.146.153) |
| 08:40.59 | *** join/#htc-linux goxboxlive (~jrs@195.80-202-137.nextgentel.com) |
| 08:46.29 | WoZZeR_ | mtd2 is c 90 4 |
| 08:47.32 | bmnbmn | [03:21] <jonpry> mtd2 is c 90 4 |
| 08:49.19 | WoZZeR_ | bmnbmn: forgot to click back in my nx client... |
| 08:49.31 | WoZZeR_ | I'm having issues with mtd from initrd |
| 08:49.46 | bmnbmn | busybox problems? |
| 08:49.53 | WoZZeR_ | I don't understand why modprobe would work |
| 08:50.01 | WoZZeR_ | even though they are included |
| 08:50.32 | WoZZeR_ | is there any way to tell what is being loaded in the kernel? |
| 08:50.40 | WoZZeR_ | to make sure it's included in the kernel? |
| 08:52.01 | bmnbmn | i dont know sorry |
| 08:52.14 | bmnbmn | though i would assume that the kernel messages would tell you that it is configuring the devices? |
| 08:52.48 | bmnbmn | found the devices i mean |
| 08:53.50 | bmnbmn | dmesg doesnt shed any light on anything? |
| 08:53.57 | WoZZeR_ | this is pissing me off.. now my normal initrd isn't working right |
| 08:54.14 | Ondalf | unless modules doesn't print any info to dmesg, then nada... if those are modules, you're seeking, lsmod shows if they're loaded. |
| 08:54.48 | bmnbmn | i believe he built what he needed into the kernel |
| 08:55.17 | Ondalf | i kinda knew that while writing |
| 08:55.33 | WoZZeR_ | something is making mtd work |
| 08:55.40 | WoZZeR_ | but not on the initrd I want it to |
| 08:55.40 | WoZZeR_ | lol |
| 08:56.10 | *** join/#htc-linux SVic (~SVic@ip20.119.dars-ip.ru) |
| 08:57.48 | Rajko | what file is compass driver in supersonic |
| 09:07.45 | WoZZeR_ | bmnbmn: I think I finally got it to work |
| 09:08.10 | WoZZeR_ | well, at least it formatted the mtd, I think |
| 09:08.14 | Markinus | Rajko: akm8973 |
| 09:08.30 | bmnbmn | WoZZeR_: good job |
| 09:08.47 | Rajko | is the magnetic field off by 90o because the chip in htcleo is rotated 90o from the way it should be ? |
| 09:08.58 | Markinus | Rajko: didn't test it |
| 09:09.04 | *** join/#htc-linux rrew (~rrew@78-2-22-187.adsl.net.t-com.hr) |
| 09:09.18 | Markinus | Rajko: but could be |
| 09:09.20 | Rajko | well would itbe ok for me just to change it in akm8973 |
| 09:09.26 | Rajko | with an ifdef for htcleo |
| 09:09.38 | Markinus | maybe better in userspace |
| 09:09.50 | Rajko | yeah but then everybody has to change their builds |
| 09:10.02 | Markinus | yes |
| 09:10.54 | Baeen | wouldn't it be best to check if it's the leo in the kernel, then change it.. saves new builds.. etc? |
| 09:11.10 | Rajko | exactly what i wanted to do |
| 09:12.46 | Markinus | Rajko: I think there is a bit work for the compas needed. There are some parameters for the driver and in the moment we'Re using nexus one. We have to check how it works |
| 09:13.10 | Markinus | Rajko: or simple try with supersonic config |
| 09:18.14 | Rajko | how would i do that |
| 09:20.31 | Markinus | Rajko: I tested it, itn'S working. I think the layout is the right thing. Try to find out how it works. Look in the header boardfile, there is a layout. |
| 09:20.39 | Markinus | isn't |
| 09:22.32 | Rajko | winmo is actually giving me the same values |
| 09:24.01 | *** join/#htc-linux aeeex (4c6601e5@gateway/web/freenode/ip.76.102.1.229) |
| 09:25.59 | *** join/#htc-linux figeloal (~chatzilla@c213-200-146-116.bredband.comhem.se) |
| 09:29.07 | Rajko | nexus one frg33 with michyprima r11 msm is giving me good values |
| 09:31.21 | Markinus | Rajko: there is the nexus config, so it has to give you the right values on a nexus |
| 09:31.44 | Rajko | on a leo. |
| 09:31.47 | Rajko | i only have a leo |
| 09:31.55 | Rajko | "nexus one frg33" is the build name |
| 09:31.59 | Markinus | ahh, ok, I misunderstud you :) |
| 09:32.11 | Markinus | hehe :) |
| 09:32.20 | Rajko | ill try with supersonic kernel now, see if they fixed it in userland |
| 09:36.26 | *** join/#htc-linux Ashar (deadly@unaffiliated/ashar) |
| 09:39.58 | Rajko | nope, it was kernel |
| 09:40.59 | Rajko | maybe its something michyprima did, gonna try his supersonic |
| 09:45.30 | Rajko | nope, must be a msm thing |
| 09:51.04 | *** join/#htc-linux GNUtoo|laptop (~gnutoo@host55-144-dynamic.54-79-r.retail.telecomitalia.it) |
| 09:51.10 | *** join/#htc-linux iliak (~asdasd@bzq-109-67-200-155.red.bezeqint.net) |
| 09:53.07 | Rajko | im reading the datasheet, and it has an internal eeprom |
| 09:54.04 | *** join/#htc-linux Andreyxxl[HD2EU] (Andreyxxl@89.32.146.153) |
| 09:55.12 | Rajko | and it has parameters like x-axis offset |
| 09:59.39 | Rajko | damn you bsod |
| 10:03.58 | *** join/#htc-linux tids2k (~tids2k@27-32-30-32.static.tpgi.com.au) |
| 10:06.03 | Rajko | where can i find that layout |
| 10:15.24 | Rajko | nvm |
| 10:19.43 | noellenchris | Markinus: u using LeTama's kernel? |
| 10:19.52 | Markinus | noellenchris: no |
| 10:20.36 | Markinus | noellenchris: new repo veo based kernel |
| 10:20.37 | Markinus | evo |
| 10:21.32 | noellenchris | LeTama's is evo, but sucks the life out of my battery...:( |
| 10:21.45 | Rajko | all evo do |
| 10:22.35 | Rajko | use michy evo |
| 10:23.03 | noellenchris | I'm going fishing today and I'll have backup power for a little, but I think I might have to reboot to winmo or try turning data off. |
| 10:23.20 | *** join/#htc-linux Opius (~Opius@cpc2-addl4-2-0-cust309.6-3.cable.virginmedia.com) |
| 10:23.26 | Rajko | use the old msm kernel if you care about bat ife |
| 10:23.30 | noellenchris | how is michy's supersonic working out for ya |
| 10:23.49 | Rajko | its normal evo, just with undervolt and no camera flashing at boot |
| 10:24.10 | noellenchris | yes, I think I may, but I had bad experiences w/ppp corrupting my data.img w/older kernels |
| 10:24.51 | Rajko | this is what -chat is for |
| 10:26.15 | *** join/#htc-linux tjs_bsd (~tjs@mail.CDPA.cc) |
| 10:27.26 | *** part/#htc-linux noellenchris (ad3d72f1@gateway/web/freenode/ip.173.61.114.241) |
| 10:37.36 | *** join/#htc-linux zycho (~zycho@g226239052.adsl.alicedsl.de) |
| 10:42.05 | *** join/#htc-linux MethoS- (~clemens@134.102.106.250) |
| 10:46.16 | *** join/#htc-linux flagada (58a1e24e@gateway/web/freenode/ip.88.161.226.78) |
| 10:48.19 | *** join/#htc-linux ALoGeNo (~alogeno@unaffiliated/alogeno) |
| 11:00.29 | *** join/#htc-linux WoZZeR__ (no@d14-69-99-229.try.wideopenwest.com) |
| 11:09.07 | *** join/#htc-linux danibjor (~no@27.137.251.212.customer.cdi.no) |
| 11:22.14 | *** join/#htc-linux luc_ (5e3edc93@gateway/web/freenode/ip.94.62.220.147) |
| 11:24.36 | luc_ | LeTama kernel + matt1.7ppp 10mah batt drain |
| 11:25.02 | luc_ | 1 issue wifi tethering doesnt start |
| 11:25.41 | Rajko | -chat |
| 11:25.42 | luc_ | Micyprima kernel +matt17ppp wifi tethering works but....300mah drain |
| 11:26.28 | *** join/#htc-linux rayman18 (~rayman18@87.pool85-54-5.dynamic.orange.es) |
| 11:28.37 | *** join/#htc-linux spetrillo (~SteveP@71.167.186.40) |
| 11:29.42 | rayman18 | any help to mount the rootfs.img in ubuntu? i havent foud the good way yet :( |
| 11:30.28 | Rajko | mount -o loop -t ext2 /path/to/rootfs.img /path/to/mount/point |
| 11:31.05 | rayman18 | thanks Rajko i will try |
| 11:34.44 | *** join/#htc-linux alexkreuz (~alexkreuz@cpe-76-167-246-10.socal.res.rr.com) |
| 11:37.34 | rayman18 | nothing, the terminal say the help info of the command mount :( |
| 11:39.43 | *** part/#htc-linux rayman18 (~rayman18@87.pool85-54-5.dynamic.orange.es) |
| 11:43.05 | *** join/#htc-linux Echo31 (~olivier@mir31-4-82-240-194-54.fbx.proxad.net) |
| 11:53.32 | *** join/#htc-linux noellenchris (ad3d72f1@gateway/web/freenode/ip.173.61.114.241) |
| 11:55.49 | noellenchris | LeTama: w/your kernel, if I check batt history, shows no signal in standby eating battery. Well not no sig, but 93% w/out signal. Any progress? Need some kernel testing? |
| 11:56.38 | *** join/#htc-linux programmer8922 (~Evan@67.219.166.182) |
| 11:58.55 | *** join/#htc-linux Cotulla (~opera@nat004-252-205-109.tvoe.tv) |
| 11:59.04 | Markinus | phh: Leos nvs from nand isn't working with linux drivers. Some values are missing or have to be changed. Very strange. I read now only the mac address and replace it. |
| 11:59.21 | [Delenn] | hello |
| 11:59.25 | Markinus | hi |
| 11:59.28 | phh | Markinus: on rhodium, there are two things that looks like wifi nvs |
| 11:59.31 | phh | only one is proper |
| 11:59.36 | [Delenn] | what's up? |
| 11:59.37 | phh | the other one doesn't work, no clue why |
| 11:59.53 | Markinus | phh: I searched the whole nand and find only one |
| 12:00.01 | phh | ok |
| 12:00.10 | phh | Markinus: see from windows ? |
| 12:00.16 | phh | something like nvram.txt or something |
| 12:00.16 | noellenchris | Good morning Cotulla |
| 12:00.30 | noellenchris | Delenn I meant... |
| 12:00.36 | Markinus | phh: good Idea, have to look |
| 12:01.46 | Markinus | phh: hehe, yes, there is one |
| 12:01.56 | Markinus | phh: with macaddr 11:22:33:44:55:66 |
| 12:02.03 | phh | -_-' |
| 12:02.03 | [Delenn] | I think nand one is used :) |
| 12:02.12 | Markinus | it seems they merge it |
| 12:02.19 | phh | [Delenn]: you know windows mobile data are in nand ? :p |
| 12:02.24 | phh | Markinus: possibly |
| 12:02.56 | [Delenn] | yes cfg data in nand\ |
| 12:03.25 | Rajko | wait, so mtd for leo is working to read from nand ? |
| 12:03.28 | *** join/#htc-linux danibjor (~no@27.137.251.212.customer.cdi.no) |
| 12:04.13 | Markinus | [Delenn]: I do it now in the same way, a static config + mac address from Nand |
| 12:04.25 | [Delenn] | :) |
| 12:05.18 | Markinus | [Delenn]: I replaced the wlan driver with newest BCM. Seems to be faster and better for battery |
| 12:05.43 | phh | Rajko: yeah mtd is one of the simpliest things to get working |
| 12:06.23 | [Delenn] | oki, I will load ur tree today... where it's located now? |
| 12:06.47 | [Delenn] | I am now adding USB mass storage support for MAGLDR :) |
| 12:06.57 | phh | MAGLDR ? |
| 12:07.02 | [Delenn] | my own loader :) |
| 12:07.14 | *** join/#htc-linux DaveWM (~dave@173-20-113-51.client.mchsi.com) |
| 12:07.15 | phh | what do you call a loader ? |
| 12:07.19 | Markinus | [Delenn]: http://gitorious.org/linux-on-wince-htc/linux_on_wince_htc I will check it in in some minutes |
| 12:07.34 | [Delenn] | ok, bootloader |
| 12:07.45 | phh | [Delenn]: so you overwrite SPL ? |
| 12:07.51 | [Delenn] | no, second one after SPL |
| 12:07.56 | [Delenn] | in chain |
| 12:08.03 | phh | ok |
| 12:08.21 | *** join/#htc-linux joplayer (~joplayer@AClermont-Ferrand-256-1-119-47.w90-10.abo.wanadoo.fr) |
| 12:08.26 | phh | why would you write usb mass from a bootloader, when you can leave it to linux ? |
| 12:08.33 | phh | like a recovery on android things |
| 12:08.58 | [Delenn] | because I need get log from kernel when it will be on nand |
| 12:09.11 | [Delenn] | so mass storage will put log as one file on disk "dmesg.txt" |
| 12:09.17 | [Delenn] | with fake MBR & FAT |
| 12:09.21 | *** join/#htc-linux jonolo (~jonolo@cpc1-pres1-0-0-cust471.pres.cable.virginmedia.com) |
| 12:10.01 | Rajko | you mean usb host mode, with an attached usb flash drive or something ? |
| 12:10.11 | [Delenn] | no, UDC mode |
| 12:10.28 | [Delenn] | so after reset, it will provide ramconsole as file on disk for computer :P |
| 12:10.54 | Rajko | why not just virtual uart |
| 12:11.07 | [Delenn] | it's not comfortable |
| 12:11.33 | *** join/#htc-linux gauner1986 (~Adium@p508C681E.dip.t-dialin.net) |
| 12:12.12 | *** join/#htc-linux skodde (~skodde@unaffiliated/skodde) |
| 12:12.16 | *** join/#htc-linux leobaillard (~leobailla@leobaillard.org) |
| 12:12.43 | *** join/#htc-linux DaveWM (~dave@173-20-113-51.client.mchsi.com) |
| 12:13.10 | [Delenn] | is it possible to mount yaffs as disk? |
| 12:13.50 | Rajko | what do you mean |
| 12:14.52 | noellenchris | gauner1986: hello, any luck yesterday with the slow wake up issues you had? |
| 12:15.22 | [Delenn] | ever in linux |
| 12:15.51 | *** join/#htc-linux luc_ (5e3edc93@gateway/web/freenode/ip.94.62.220.147) |
| 12:17.42 | Rajko | it needs some info from mtd |
| 12:17.49 | Rajko | like block size, bad blocks, etc |
| 12:18.39 | LeTama | noellenchris: I'm not looking at power at all |
| 12:19.21 | LeTama | noellenchris: there are more important things to do before |
| 12:20.33 | [Delenn] | Rajko, just thought about idea - make feature to mount internal yaffs as usb disk, so u can edit it on computer without booting os |
| 12:20.43 | [Delenn] | but not sure if it can be mounted like fat and etc |
| 12:21.20 | Rajko | it can only be mounted on a mtd nand device, or on ram emulation device |
| 12:21.31 | [Delenn] | so it won't work? |
| 12:21.47 | Rajko | so, if you have usb mass storage device on computer, you cant mount yaffs2 partition from it |
| 12:21.53 | [Delenn] | shit |
| 12:22.54 | Markinus | so, new wlan drivers and mac from nand are checked in |
| 12:23.41 | Rajko | what some people do is, make 1 vfat or ext2 or whatever |
| 12:23.47 | Rajko | file, that fills the entire yaffs2 fs |
| 12:24.04 | Rajko | then you can provide that as mass storage contens |
| 12:24.43 | Rajko | eg, you make a loop device from the file on yaffs2 |
| 12:24.59 | Rajko | so yaffs2 handles the bad block and wear management |
| 12:25.07 | Rajko | while the actual fs is whatever you want it to be |
| 12:26.29 | Rajko | how about that [Delenn] |
| 12:27.25 | DuperMan | playing the devil's advocates, it sounds SLOW |
| 12:27.57 | Rajko | its what some commercial devices do to enable usb mass storage on raw nand |
| 12:28.24 | Rajko | it can be for testing only |
| 12:28.36 | Rajko | when he needs to rapidly change fs contents |
| 12:29.03 | Rajko | (its also basically what usb flash drives and sd cards already do, only in hardware) |
| 12:29.23 | DuperMan | being wear aware as it is must take a toll either in cpu time or access times |
| 12:29.48 | Rajko | all modern flash drives perform bad block and wear leveling management |
| 12:29.48 | DuperMan | especially in software implemantation |
| 12:30.07 | Rajko | yet expose raw blocks, that are guaranteed to be good |
| 12:31.25 | DuperMan | but that's in hardware (controller). does it blend? |
| 12:32.16 | Rajko | we have a 1ghz snapdragon... its not gonna be that much slower |
| 12:33.07 | DuperMan | you're making it seem like a de facto standard - are there cases of such implementation in existing products? |
| 12:33.20 | Rajko | gp2x does it like that |
| 12:34.34 | Rajko | its not gonna have a bigger peformance hit than our loop mounting of images on sd card anyway |
| 12:35.15 | DuperMan | wow... googled gp2x, haven't seen it in a while:) still, it emulates 16bit consoles and acts as a media player - can the yaffs2 subroutines be fully bypassed for day to day use of our device, minimizing overhead when not necessary? |
| 12:36.14 | Rajko | all android devices so far use yaffs2 for the nand ... |
| 12:37.09 | DuperMan | so... where's... the... issue?:) |
| 12:37.13 | [Delenn] | yaffs2 is RO? |
| 12:37.17 | Rajko | no. |
| 12:37.54 | [Delenn] | so why it can't be mounted? |
| 12:38.03 | Rajko | can be mounted on mtd devices only |
| 12:38.24 | Rajko | as it needs to manually invoke flash_erase, etc |
| 12:38.33 | [Delenn] | oh they include it into FS |
| 12:38.37 | [Delenn] | ok clear now |
| 12:39.34 | [Delenn] | gp2x? |
| 12:39.47 | DuperMan | http://en.wikipedia.org/wiki/GP2X |
| 12:39.53 | Rajko | gp2x only has nand flash, and it has linux on it |
| 12:40.07 | Rajko | however, for user friendliness, it reads its ROMs from a vfat loop mounted image on that yaffs2 |
| 12:40.19 | [Delenn] | heh |
| 12:40.21 | [Delenn] | 200 + 200 |
| 12:40.27 | Rajko | its usb mass storage driver only exposes blocks of that vfat image |
| 12:40.38 | [Delenn] | there dual processor kernel? |
| 12:40.52 | Rajko | i dont know, its weird |
| 12:40.54 | [Delenn] | usb mass storage exposes any disk as raw sectors |
| 12:41.02 | [Delenn] | not as filesystem |
| 12:41.06 | Rajko | yes |
| 12:41.17 | Rajko | the raw sectors it exposes, are the sectors of the FILE on yaffs21 |
| 12:41.57 | DuperMan | again, a lot like the current ext2 image's behaviour from it's comfy fat32 nested home |
| 12:42.01 | Rajko | can you even expose a mtd ddevice ? |
| 12:42.25 | [Delenn] | there no definitions in USB standards I guess |
| 12:42.41 | Rajko | but there would be no way for you to write/erase it |
| 12:42.43 | Rajko | as that uses mtd calls |
| 12:43.07 | [Delenn] | ok |
| 12:43.15 | DuperMan | wait... when you connect the winmo in sync mode, doesn't it sorta kinda allow access? |
| 12:43.24 | DuperMan | or is that a loop inside the nand? |
| 12:43.27 | Rajko | thats all through their API |
| 12:43.31 | Rajko | its not mass storage |
| 12:43.35 | [Delenn] | it's another thing... |
| 12:43.48 | DuperMan | right, nvm then if it's that different |
| 12:43.50 | [Delenn] | in CE this stuffs handled by flash driver |
| 12:44.02 | [Delenn] | so any filesystem can run on flash without major problems |
| 12:44.38 | Rajko | still, there's no raw block access going on in activesync mode |
| 12:44.41 | Rajko | just pushing/pulling files |
| 12:44.50 | [Delenn] | RAPI yes... |
| 12:45.38 | DuperMan | yeah... I'll just think of all that as "buffer galore" |
| 12:46.31 | Rajko | embedding block management into the FS has its benefits though |
| 12:47.22 | [Delenn] | few yes |
| 12:47.23 | DuperMan | duh. compatibility+the benefits of the fs |
| 12:48.07 | *** join/#htc-linux Blades (~Blades@c-24-34-126-187.hsd1.ct.comcast.net) |
| 12:49.49 | Rajko | does anyone know the reason of the slow hw3d performance on linux hd2 ? |
| 12:50.13 | phh | clock is at minimal speed ? |
| 12:50.29 | Rajko | android hd2 |
| 12:50.33 | Rajko | hmm ? |
| 12:50.44 | phh | grp clock I mean |
| 12:50.55 | Rajko | how do you change this |
| 12:51.12 | phh | I don't know enough HD2 mess for that |
| 12:51.14 | phh | I think it's RPC for you |
| 12:52.12 | Blades | its not slow. |
| 12:52.28 | phh | ah. |
| 12:52.30 | Blades | oh, linux.. i dont know the state of ubuntu hw3d |
| 12:52.34 | Rajko | no, android |
| 12:52.41 | Blades | its not slow |
| 12:52.41 | Rajko | kwaak3 runs at 0.2 fps |
| 12:52.46 | Blades | hold on |
| 12:52.54 | phh | Blades: yeah no 3D in linux atm |
| 12:52.58 | *** join/#htc-linux F-D (~Stoned@92.30.74.172) |
| 12:54.43 | Rajko | there must be a parameter im missing somewhere |
| 12:54.59 | Markinus | Rajko: some builds are fast some not |
| 12:55.04 | Markinus | I thing missing files or so |
| 12:56.00 | Rajko | http://www.youtube.com/watch?v=X2w7cG2ggQA <- ive tried even using the exact same build and kernel as his description, still 0.5-1fps |
| 12:56.01 | Blades | http://home.comcast.net/~ibladesi/snap20100905_000717.png |
| 12:56.16 | Blades | see.. |
| 12:56.18 | Blades | not slow |
| 12:56.21 | Blades | problem is adreno |
| 12:56.36 | Blades | or you downloaded incorrect build of kwaak3 |
| 12:56.48 | Blades | mine was fine running it |
| 12:56.55 | Blades | it was annoying to play it on a touch screen tho |
| 12:57.20 | Blades | ok.. so.. phh |
| 12:57.26 | Blades | no usb on tp2 yet, right? |
| 12:57.31 | phh | what do you mean ? |
| 12:58.02 | Blades | ahh, weren't you working on nand tp2 with wozzer and acl |
| 12:58.09 | phh | I'm kind of. |
| 12:58.18 | phh | but you mean usb on TP2 ***from nand*** then ? |
| 12:58.23 | Blades | yes, sorry |
| 12:58.28 | Rajko | Blades, have you tried quake2 |
| 12:58.37 | Rajko | it gets 1fps when there's particles |
| 12:58.44 | phh | it depends on alex[sp3dev] patches :p |
| 12:59.05 | Blades | no.. i won't bother either.. touch screen gaming is like playing football using your nuts |
| 12:59.17 | phh | :D |
| 12:59.26 | Blades | I was wondering why no one has mentioned adb's capability to use tcp/ip |
| 12:59.50 | phh | Blades: because it's annoying compared to usbnet ? |
| 12:59.56 | Blades | oh no |
| 12:59.58 | Rajko | lol, the lsensor driver likes turninig the backlight completely off sometimes |
| 13:00.03 | Blades | i was refering to quake 2 |
| 13:00.19 | phh | Blades: lolwat ? |
| 13:00.19 | phh | you want network quake2 over adb ? |
| 13:00.20 | Blades | no no |
| 13:00.39 | Blades | sorry, i should've mentioned to whom i was replying to in the soccer nuts thing |
| 13:00.59 | Blades | to you, phh,.. i was asking why adb over wifi hasn't been looked into |
| 13:01.09 | Blades | while usb is in development |
| 13:01.17 | phh | Blades: because adb works fine from haret ? |
| 13:01.28 | Blades | yes.. but for nand |
| 13:01.32 | Blades | not so much |
| 13:01.36 | phh | and adb isn't really needed for nand ... |
| 13:01.42 | phh | adb is mostly only for userland stuff |
| 13:02.15 | phh | and the problem ATM is everything but userland for nand |
| 13:02.54 | Blades | how so |
| 13:03.09 | phh | the problem are in drivers ... ? |
| 13:03.20 | phh | well you can tell acl and wozzer about it later |
| 13:03.37 | Blades | haha, well.. i'll see if i can get it to work over wifi and offer a working option |
| 13:04.00 | Blades | i'm feeling like a man about town after getting ubuntu working on 4x software raid0 |
| 13:04.31 | phh | yeah adb over IP is documented mostly everywhere. |
| 13:04.34 | Blades | what phone do you currently have, phh? |
| 13:04.42 | phh | acer liquid and HTC TP2 |
| 13:05.12 | Blades | ah, most of the people i've talked to didn't know.. so i assumed like a clown that was stat quo |
| 13:05.30 | phh | it's because I work mostly everywhere. |
| 13:05.58 | phh | and I did more useful work on HD2 than TP2 lately :p |
| 13:06.33 | Blades | haha, yeah, that always left me guessing what phone you actually have |
| 13:06.56 | Blades | i have an ex gf who is supposed to give me back my 'other' hd2 |
| 13:07.23 | Blades | shes been holding it ransom.. i think i'll have to take one for the team and actually go see her to get it :( |
| 13:07.47 | Ondalf | just pack your jungle knife and you'll be fine |
| 13:08.11 | [Delenn] | :D |
| 13:08.11 | Blades | you have tmo? i don't know who i'd donate it to.. i'd probably pick random or ask dcordes |
| 13:08.37 | Blades | she just got her concealed weapons permit.. i'd be bringing a knife to a gun fight |
| 13:08.40 | Blades | literally |
| 13:08.43 | *** join/#htc-linux NeoFlux (~NeoFlux@89.243.131.103) |
| 13:15.53 | Blades | amazing.. ok.. i'm silly.. theres a friggin widget for adb over wifi in the market |
| 13:17.15 | *** join/#htc-linux Microang (522deb64@gateway/web/freenode/ip.82.45.235.100) |
| 13:17.34 | Microang | Hey has anyone noticed that xda is down? |
| 13:18.23 | Rajko | Blades, i thought that hw3d being slow is due to using old grahics driver in kernel |
| 13:20.04 | Blades | its possible that it could be better |
| 13:20.09 | Blades | i don't know enough to tell |
| 13:20.24 | Blades | but i do know that it performs better than android |
| 13:20.25 | Blades | er |
| 13:20.27 | Blades | n1 |
| 13:20.40 | Blades | as seen here |
| 13:20.41 | Blades | http://home.comcast.net/~ibladesi/snap20100905_000717.png |
| 13:20.47 | Blades | this is on my phone, using quadrant advanced |
| 13:20.54 | Blades | it breaks the scores down into sections |
| 13:20.57 | matth | Microang: yep |
| 13:21.11 | Blades | the quadrant cpu score is highly variable.. |
| 13:21.18 | Blades | even with the frequency locked |
| 13:21.25 | Rajko | cuz of jit |
| 13:21.38 | Blades | and yes.. microang - it has been down for 3-4 hours |
| 13:22.06 | *** part/#htc-linux F-D (~Stoned@92.30.74.172) |
| 13:22.14 | Blades | what tool is used to edit/extend ext2 files? |
| 13:22.19 | Microang | lol, thats annoying! Does anyone know why? I just wanted to download a kernel to test! :( |
| 13:22.30 | Blades | what kernel |
| 13:22.33 | *** join/#htc-linux Termana (~bradley@123-3-181-9.static.dsl.dodo.com.au) |
| 13:22.45 | Rajko | Blades, you cant really |
| 13:23.12 | Rajko | you can make a new one with bigger size then cp -ar everything over |
| 13:23.14 | Blades | ok, extract.. and recreate.. |
| 13:23.24 | matth | their NS are down |
| 13:23.30 | Blades | ah, and how to do that |
| 13:23.31 | Rajko | just mount -o loop -t ext2 system.ext2 /path/to/mnt/point |
| 13:23.47 | Blades | neat |
| 13:24.11 | Rajko | use dd to make a new file of desired size |
| 13:24.22 | Blades | damn, you read my mind |
| 13:24.27 | *** join/#htc-linux gauner1986 (~gauner198@p508C681E.dip.t-dialin.net) |
| 13:24.27 | Blades | rajko, have you run quadrant? |
| 13:24.30 | Rajko | then mkfs -t ext2 |
| 13:24.31 | Rajko | yes |
| 13:24.33 | gauner1986 | hi |
| 13:24.34 | Rajko | like 1200 |
| 13:24.42 | *** join/#htc-linux NeoFlux (~NeoFlux@92.25.230.207) |
| 13:24.46 | Blades | ok, so there is something wrong with your setup |
| 13:24.53 | Blades | you saw mine was 1806... |
| 13:25.02 | Blades | hi gauner |
| 13:25.11 | Rajko | whats your etup |
| 13:25.28 | Blades | just msg me.. i dont want to clog up irc log |
| 13:26.22 | Microang | michyprima |
| 13:26.26 | Microang | evo |
| 13:26.47 | *** join/#htc-linux Kasjopaja (~Tina@p57BC1C7A.dip0.t-ipconnect.de) |
| 13:27.05 | Blades | i might have that |
| 13:27.19 | Blades | dammit, its on my other comp |
| 13:27.52 | matth | guys, any idea what NVitems are in HTC phone ? |
| 13:27.56 | matth | non volatile storage ? |
| 13:27.59 | Markinus | gauner1986: Hi gauner, I checked new wifi stuff in, you could try it |
| 13:28.09 | noellenchris | microang: just google for the thread and use cached page to get d/l links |
| 13:28.20 | Microang | hmm ok |
| 13:28.25 | noellenchris | I'm doing the same now....hehe |
| 13:28.25 | gauner1986 | Markinus: okay.. gotta eat sth first :) |
| 13:29.03 | *** join/#htc-linux Opius (~Opius@cpc2-addl4-2-0-cust309.6-3.cable.virginmedia.com) |
| 13:29.29 | matth | I'm interested to what EFS is also and what it's supposed to store |
| 13:29.37 | Markinus | gauner1986: eat?? irrelevant! :)) |
| 13:29.41 | Microang | no cached doesn't work either :(, I'll just wait till it's back up or another greaet kernel gets released here, I'm currently using Letama's :D |
| 13:29.50 | Microang | great |
| 13:30.33 | Blades | micro - i have it |
| 13:30.38 | Blades | 7zipping now |
| 13:30.54 | Microang | for sense? is it any good btw? |
| 13:32.17 | DuperMan | aren't all kernels blind to sense? |
| 13:32.20 | DuperMan | oO |
| 13:32.33 | Microang | nope |
| 13:32.41 | Microang | some have the right drivers |
| 13:32.54 | matth | any idea ? or is that so noob q? that it doesn't require an answer ? |
| 13:33.15 | *** join/#htc-linux MN (5685c0dc@gateway/web/freenode/ip.86.133.192.220) |
| 13:33.19 | DuperMan | Microang: tnx |
| 13:33.29 | Microang | :D |
| 13:33.31 | MN | Hello |
| 13:33.52 | matth | the wiki doesn't mention any of those |
| 13:35.20 | Blades | micro |
| 13:35.36 | Microang | yeah? |
| 13:35.49 | Blades | you got msg.. its like 11 megs.. compared to the original 90.. i love 7z |
| 13:36.47 | NeoFlux | Microang, what kernel? |
| 13:38.14 | NeoFlux | For anyone who is bored and waiting for XDA http://www.engadget.com/2010/09/12/pac-man-reenacted-by-humans-in-stop-motion-masterpiece/ |
| 13:40.17 | NeoFlux | pokes Microang |
| 13:40.31 | Microang | yes? |
| 13:40.59 | NeoFlux | Since XDA is down so I can't check, you say your using Letama's kernel? |
| 13:41.38 | NeoFlux | I'm using gauner1986's from the 6th, just wondering if there was any thing interesting with Letama's kernel :) |
| 13:41.39 | Microang | yes, you can find it in the logs |
| 13:41.59 | NeoFlux | Microang, today or yesterday? |
| 13:42.05 | Microang | yes it wakes faster and is evo based |
| 13:42.23 | NeoFlux | ahh, anything I should worry about? heard about bsod issues with the evo builds |
| 13:42.28 | Microang | not sure before yesterday I think |
| 13:42.37 | NeoFlux | the wake problem is doing my head in now |
| 13:42.43 | NeoFlux | someone needs to put a lid on it :P |
| 13:42.52 | manusfreedom | Yes BSOD with evo kernel |
| 13:42.57 | Microang | they have |
| 13:43.05 | Microang | nope no bsod here! |
| 13:43.19 | noellenchris | not on LeTama's kernel |
| 13:43.28 | DuperMan | manusfreedom: I sorta left my hd2 booting once and that blue screen only affects the display |
| 13:43.37 | DuperMan | android DOES load oO |
| 13:43.39 | *** join/#htc-linux Termana (~bradley@123-3-154-197.static.dsl.dodo.com.au) |
| 13:43.49 | DuperMan | talking about the evo kernels |
| 13:44.01 | manusfreedom | DuperMan: yes normal |
| 13:44.08 | noellenchris | diff between gauner1986 & LeTama's posted yesterday around 15:00 I think, check logs |
| 13:44.09 | NeoFlux | Microang, what rom? |
| 13:44.22 | manusfreedom | because the speed change and the video got a timeout too quick |
| 13:44.22 | Microang | mattc 1.7 ppp |
| 13:44.24 | DuperMan | manusfreedom: buffer misalligned? |
| 13:44.32 | Blades | did you get my msg microang |
| 13:44.41 | Blades | it has link to michy-evo kernel |
| 13:44.44 | Microang | yes blades thNKS. |
| 13:45.04 | manusfreedom | BSOD is only a consequence of the speed |
| 13:45.48 | DuperMan | manusfreedom: how does it happen? if educating a non-contributive noob on this isn't too big a hassle |
| 13:46.05 | NeoFlux | Microang file name? |
| 13:46.16 | NeoFlux | for kernel :) |
| 13:46.43 | manusfreedom | DuperMan: how happen what? the speed? |
| 13:46.47 | Microang | LEMME UPLOAD IT FOR YOU |
| 13:46.54 | Microang | oops caps :D |
| 13:46.57 | NeoFlux | Microang, found it! |
| 13:47.04 | Microang | ok |
| 13:47.06 | NeoFlux | megaupload link? :P |
| 13:47.09 | NeoFlux | thanx :P |
| 13:47.32 | Microang | so u found it and are downloading it? |
| 13:47.38 | NeoFlux | Microang, link doesn't work |
| 13:47.39 | Microang | you also need the wifi odule though |
| 13:47.42 | NeoFlux | :( |
| 13:47.49 | Microang | lemme upload! :D |
| 13:47.51 | NeoFlux | The file you are trying to access is temporarily unavailable. |
| 13:47.52 | NeoFlux | :D |
| 13:47.59 | NeoFlux | thank you Microang |
| 13:48.01 | DuperMan | I can uplo... nvm:) |
| 13:50.10 | MN | [Delenn] u adding usb recognition to MAGLDR |
| 13:51.25 | NeoFlux | Microang, any idea when netripper will start autobuilds for the new tree? |
| 13:51.48 | Microang | nope he ain't been on here in a loooonnnnngggg time! |
| 13:51.57 | NeoFlux | i hope he is still alive :( :P |
| 13:51.59 | Microang | ~seen Netripper |
| 13:52.04 | apt | netripper is currently on #htc-linux, last said: 'not specifically.. i havent tracked the problem down tocaches'. |
| 13:52.17 | NeoFlux | o.O |
| 13:53.01 | NeoFlux | using gauner1986's kernel, the TS is still active if you let it goto sleep |
| 13:53.32 | Rajko | yes, as it just turns off BL |
| 13:53.49 | NeoFlux | hmm |
| 13:55.48 | NeoFlux | has mattc got a website with his builds on? want to test 1.7 but can't because of XDA being down :( |
| 13:56.00 | Microang | megaupload won't allow me to upload it it keeps saying not available! |
| 13:56.12 | Microang | yes, androidmayhem.com |
| 13:56.29 | Microang | http://www.megaupload.com/?d=HRW5905I |
| 13:56.43 | Microang | there we go 7z inside 7z worked |
| 13:56.49 | Microang | :D |
| 13:57.22 | NeoFlux | Microang, thanx :D |
| 13:57.29 | Microang | :D |
| 13:57.31 | NeoFlux | Microang, is mattc 1.7 sense? |
| 13:57.44 | NeoFlux | ick, is 1.7 built with sense or? |
| 13:57.45 | Microang | on androidmayhem¬ |
| 13:57.50 | NeoFlux | don't like sense builds :( |
| 13:57.52 | Microang | androidmayhem.com |
| 13:57.54 | Microang | yes |
| 13:58.12 | Microang | why it makes sense to have sense unless your senseless! |
| 13:58.56 | NeoFlux | :o |
| 13:58.59 | manusfreedom | For EVO kernel dev: I found an error in code line 110 :[return msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);] must be [return msm_proc_comm(PCOM_VREG_SWITCH, &id, &disable);] |
| 14:00.30 | *** join/#htc-linux Kasjopaja23 (~Tina@p57BC1983.dip0.t-ipconnect.de) |
| 14:01.20 | Microang | actually androidmayhem is now shit since I left it! I used to mod! :( |
| 14:02.13 | Markinus | manusfreedom: it's correct |
| 14:02.21 | Markinus | disable=0 |
| 14:02.24 | Microang | they don't even have mattc anymore |
| 14:02.30 | Markinus | enable=0 -> disabled |
| 14:02.45 | Markinus | manusfreedom: it's standard code, not modificated by us |
| 14:05.15 | *** join/#htc-linux surge (surge@pool-98-118-157-221.bflony.fios.verizon.net) |
| 14:06.11 | *** join/#htc-linux NeoFlux2 (~NeoFlux@92.25.230.207) |
| 14:12.38 | *** join/#htc-linux AstainW00t (AstainHell@unaffiliated/astainhellbring) |
| 14:13.37 | *** part/#htc-linux [Delenn] (~opera@nat004-252-205-109.tvoe.tv) |
| 14:19.49 | *** join/#htc-linux [acl] (~abel@cpe-69-203-141-229.si.res.rr.com) |
| 14:22.32 | [acl] | whats good |
| 14:22.50 | phh | life, beer |
| 14:23.03 | [acl] | beer ? woa.. thought u only drang bad milk |
| 14:23.09 | phh | . |
| 14:23.10 | [acl] | wait.. thats cotulla |
| 14:23.35 | [acl] | beer is good |
| 14:23.45 | Rajko | manus cant code why listen to him |
| 14:24.02 | DuperMan | "if you like my work buy some milk, keep it out of the fridge for a week then send it to me"? |
| 14:24.44 | [acl] | thats about right.. week should suffice |
| 14:24.51 | DuperMan | lol |
| 14:25.41 | [acl] | phh: question time |
| 14:25.51 | phh | yup ? |
| 14:25.57 | [acl] | phh: how familiar are you with these new usb drivers |
| 14:26.04 | phh | mostly not |
| 14:26.22 | [acl] | shit.. no good |
| 14:26.29 | phh | why ? |
| 14:26.44 | [acl] | well we arent 100% complete.. so i wanna finish it up |
| 14:27.03 | [acl] | .hw_reset on the msm_hsusb_pdada .. im not really suyre what it does |
| 14:27.14 | [acl] | i know its not phy_reset |
| 14:27.24 | [acl] | and they took off phy_shutdown |
| 14:27.26 | manusfreedom | Markinus: lol, I don't read correctly because in codeaurora they have disable var... |
| 14:27.39 | *** join/#htc-linux Andreyxxl[HD2EU] (Andreyxxl@89.32.146.153) |
| 14:27.49 | Markinus | manusfreedom: aso:) I wondered a bit :) |
| 14:28.26 | [acl] | ahh markinus is here.. you guys run this new usb gadget driver right. |
| 14:30.21 | Markinus | [acl]: yes |
| 14:30.52 | [acl] | .hw_reset on the msm_hsusb_pdada .. im not really suyre what it does |
| 14:30.52 | [acl] | <PROTECTED> |
| 14:30.52 | [acl] | <PROTECTED> |
| 14:31.47 | [acl] | markinus: .hw_reset sounds like shutdown and reset again ? |
| 14:33.51 | *** join/#htc-linux Kasjopaja (~Tina@p57BC022B.dip0.t-ipconnect.de) |
| 14:33.59 | Markinus | hmm, don'T know, if I look correctly we donT use it |
| 14:34.13 | Markinus | [acl]: only phy_reset |
| 14:34.22 | [acl] | ahh .. ok.. |
| 14:37.27 | *** join/#htc-linux drfosters (~drfosters@108.111.136.139) |
| 14:43.56 | *** join/#htc-linux Blizzzard (5e0522a5@gateway/web/freenode/ip.94.5.34.165) |
| 14:49.40 | *** part/#htc-linux Baeen (~Bane@ppp118-208-202-97.lns20.hba1.internode.on.net) |
| 14:49.50 | *** join/#htc-linux Baeen (~Bane@ppp118-208-202-97.lns20.hba1.internode.on.net) |
| 14:56.30 | *** join/#htc-linux dieselboy (~dieselboy@dsl-69-172-110-202.acanac.net) |
| 14:59.53 | *** join/#htc-linux lejinad (~danijel@93-138-237-253.adsl.net.t-com.hr) |
| 15:01.38 | *** join/#htc-linux hyperfire21 (~nun@c-98-223-15-190.hsd1.il.comcast.net) |
| 15:06.46 | *** join/#htc-linux csja (~Anon@198.84-48-193.nextgentel.com) |
| 15:23.30 | *** join/#htc-linux Alex[sp3dev] (~alexander@91.209.218.3) |
| 15:24.01 | Alex[sp3dev] | [acl]: here? |
| 15:24.33 | rrew | ~seen emwe |
| 15:24.38 | apt | emwe <~mweirauch@cable-86-56-8-104.cust.telecolumbus.net> was last seen on IRC in channel #htc-linux, 4d 19h 30m ago, saying: 'camro, good luck. give viruscrazy's patch a try. i rather keep it for now. and it seems to do some magic detecting the battery models and from a quick look, seems to dynamically select some predefined lookup tables.'. |
| 15:25.58 | Alex[sp3dev] | i feel stupid. after we've fixed the usb, i have found the code that sets up the ulpi in almost the same way on codeaurora.. but at least now i know how ulpi works and how hw on kovs works |
| 15:26.31 | *** join/#htc-linux Opius (~Opius@cpc2-addl4-2-0-cust309.6-3.cable.virginmedia.com) |
| 15:29.52 | *** join/#htc-linux iDavid (c3d35597@gateway/web/freenode/ip.195.211.85.151) |
| 15:34.40 | *** join/#htc-linux nineX_ (~nunya@75-132-13-29.dhcp.stls.mo.charter.com) |
| 15:38.12 | *** join/#htc-linux Neo31 (~Neo31@unaffiliated/neo31) |
| 15:40.18 | *** join/#htc-linux Rewind402 (~rrew@78-3-209-190.adsl.net.t-com.hr) |
| 15:40.34 | *** part/#htc-linux Rewind402 (~rrew@78-3-209-190.adsl.net.t-com.hr) |
| 15:41.07 | *** join/#htc-linux Rewind402 (~rrew@78-3-209-190.adsl.net.t-com.hr) |
| 15:43.51 | *** join/#htc-linux rrew (~rrew@78-3-209-190.adsl.net.t-com.hr) |
| 15:45.43 | *** join/#htc-linux Neonkoala (~Neonkoala@92.20.209.90) |
| 15:45.55 | *** join/#htc-linux L_miller (~IceChat7@68-115-50-78.dhcp.eucl.wi.charter.com) |
| 15:47.02 | lejinad | anyone to test leo kernel for BSOD-s ? |
| 15:47.17 | gauner1986 | for bsod's? |
| 15:47.41 | lejinad | yeah, to see will there be any bsod ? |
| 15:47.48 | lejinad | evo kernel |
| 15:48.52 | lejinad | http://htcleo.noobhands.net/dan1j3l/ |
| 15:49.00 | lejinad | there is BSOD-TEST kernel |
| 15:49.12 | Rajko | modules too, thx |
| 15:49.46 | lejinad | no this is without modules, just want to test bsod |
| 15:49.54 | Rajko | MODULES. |
| 15:50.03 | lejinad | :p |
| 15:50.13 | *** join/#htc-linux Akustik84 (~volodin_d@89-178-242-51.broadband.corbina.ru) |
| 15:50.13 | lejinad | ok, maybe just one :D |
| 15:50.24 | Rajko | just put bcm and tun there, like anyone else |
| 15:51.15 | Rajko | and ill slap it on |
| 15:51.59 | *** join/#htc-linux Rican (4c656ed2@gateway/web/freenode/ip.76.101.110.210) |
| 15:52.11 | lejinad | they are up |
| 15:52.17 | lejinad | in modules dir |
| 15:54.00 | Rajko | boot 1 no bsod |
| 15:54.24 | lejinad | just continue testing :) |
| 15:55.19 | Rajko | it takes a while to boot from class 2 |
| 15:55.48 | lejinad | that's why i have class 6 :D |
| 15:55.56 | Rajko | doesnt that suck up ma's |
| 15:56.32 | lejinad | gotta go now, bbl... |
| 15:59.26 | gauner1986 | Markinus: ok, i'm back now.. did you also test wifi tethering with the new driver? |
| 15:59.40 | Markinus | gauner1986: yes, works fine :) |
| 15:59.57 | gauner1986 | Markinus: okay :) |
| 16:00.08 | gauner1986 | still no update on the wakeup issues? |
| 16:00.29 | gauner1986 | Markinus: where can i find the new firmware? |
| 16:00.34 | Markinus | gauner1986: look after start to telefoninfo/hardware, there should be your true mac address for wifi |
| 16:01.42 | Markinus | http://htc-linux.org/wiki/index.php?title=LeoWifi |
| 16:01.50 | gauner1986 | ok |
| 16:02.01 | gauner1986 | hey dan |
| 16:02.14 | dan1j3l | hi |
| 16:02.39 | Rajko | no bsod yet |
| 16:02.44 | dan1j3l | Markinus: i need tester for bsod :D |
| 16:03.03 | gauner1986 | dan1j3l: also about the wakeup issues? :) |
| 16:03.12 | *** join/#htc-linux Cass (~Cass@87-194-153-242.bethere.co.uk) |
| 16:03.32 | gauner1986 | hey cass |
| 16:03.32 | dan1j3l | gauner1986: hehe, bsod first :p |
| 16:03.55 | gauner1986 | i only have one in ten boots or so |
| 16:03.56 | Markinus | dan1j3l: ok, but difficould to test, it's only ca. every 50 boot on my dev . . |
| 16:04.22 | Rajko | it happens like 50% for me |
| 16:04.27 | gauner1986 | it mostly occurs with usb plugged in for me |
| 16:04.29 | dan1j3l | Markinus: i know, that's why i need more testers |
| 16:04.45 | Markinus | dan1j3l: hehe:) give me a patch |
| 16:05.12 | Cass | hey gauner1986 |
| 16:05.22 | dan1j3l | Markinus: no pathc yet because it's too messy, only kernel |
| 16:05.24 | Rajko | dan1j3l, wifi gives m "Error" tho |
| 16:05.27 | dan1j3l | patch* |
| 16:05.38 | Rajko | with the modules you gave |
| 16:05.54 | *** join/#htc-linux mastermerlin (~Adium@p4FEE5984.dip.t-dialin.net) |
| 16:06.02 | dan1j3l | Rajko: try enable wifi again |
| 16:06.08 | Rajko | just instant error |
| 16:06.11 | Rajko | like mismatching module |
| 16:06.52 | gauner1986 | shitty weather today |
| 16:06.52 | gauner1986 | :( |
| 16:07.17 | Rajko | dan1j3l, BLUESCREEN |
| 16:07.21 | Rajko | with usb connected in activesync mod |
| 16:07.26 | gauner1986 | yeah |
| 16:07.34 | gauner1986 | i also have bsods often with activesync |
| 16:07.36 | dan1j3l | fuck, then back to work |
| 16:07.40 | dan1j3l | :( |
| 16:07.45 | Rajko | booted wm, played some bubble breaker |
| 16:07.50 | Rajko | connected usb, chose actvesync |
| 16:08.00 | Rajko | then total commander to launch android |
| 16:08.41 | gauner1986 | Markinus: defconfig has bcm4329 as default Oo |
| 16:09.00 | dan1j3l | bbl |
| 16:09.08 | Markinus | gauner1986: yes, I know |
| 16:09.09 | *** join/#htc-linux theadde (sven@lunix.hostit.se) |
| 16:09.28 | Markinus | gauner1986: but makefile points to new one, this was bevor wrong and ponitet to 203 |
| 16:09.31 | Markinus | 204 |
| 16:10.00 | Markinus | gauner1986: yeah, we could create a new entry, in the moment it'S the default one |
| 16:10.08 | gauner1986 | ok |
| 16:10.26 | gauner1986 | and we should throw out rmnet out of defconfig |
| 16:10.29 | theadde | hi, grabbed your latest zimage thru the logs dan1j3l_away , I don't experience the same issues Rajko has. wifi works with your modules. |
| 16:11.11 | Rajko | maybe i need tochmod 777 them |
| 16:11.32 | theadde | I just put em in android,root etc and rebooted phone |
| 16:11.49 | theadde | thus i got the red led always on =) |
| 16:11.52 | theadde | with this zimage |
| 16:11.57 | Rajko | yeah i always copy stuff to /system manually |
| 16:12.18 | theadde | and uhm, sometimes it doesnt wake up either |
| 16:19.10 | NeoFlux2 | . |
| 16:24.54 | *** join/#htc-linux l_millerL (~Lmiller17@68-115-50-78.dhcp.eucl.wi.charter.com) |
| 16:27.21 | *** join/#htc-linux WoZZeR_ (no@d14-69-99-229.try.wideopenwest.com) |
| 16:27.50 | WoZZeR_ | jonpry: so I got the block devices to be found, but they are not accrurately written to |
| 16:28.02 | WoZZeR_ | and I can't mount the root partition in android |
| 16:28.13 | jonpry | not accurately written to? |
| 16:28.16 | WoZZeR_ | yeah |
| 16:28.30 | WoZZeR_ | the first time I installed, nothing was written to them |
| 16:28.43 | WoZZeR_ | and with android, I can't boot into it with the 4 partitions to check |
| 16:29.03 | WoZZeR_ | the size seems correct though |
| 16:29.16 | Rajko | dan1j3l_away, it seems that if winmo is on for longer than a minute, you get bsod |
| 16:29.19 | Rajko | otherwise no |
| 16:29.20 | jonpry | but you did mkyaffs2fs successfully? |
| 16:29.42 | WoZZeR_ | I think it worked |
| 16:29.51 | WoZZeR_ | it never does that though |
| 16:29.54 | WoZZeR_ | flash_eraseall /dev/mtd/mtd2 |
| 16:29.58 | WoZZeR_ | mount -t yaffs2 /dev/block/mtdblock2 /system |
| 16:30.10 | phh | what partitions do you use ? |
| 16:30.19 | Rajko | mkyaffs2fs seems to not work for me at all (on other devices) |
| 16:30.21 | WoZZeR_ | mtdparts=msm_nand:0x10000000@0x0(nand)ro,0x00040000@0x04000000(root),0x066C0000@0x04040000(system),0x06f60000@0x0A700000(userdata) |
| 16:30.31 | Rajko | i always had to make a empty yaffs2 right on th mtd, then copy files over |
| 16:30.44 | jonpry | wozzer: you will have to make the fs or it won't be mountable |
| 16:31.14 | WoZZeR_ | shouldn't the install script have that? |
| 16:31.34 | phh | jonpry: yaffs2 doesn't need to have a FS "installed" |
| 16:31.36 | jonpry | it doesn't. it expects partitioned formatted devices |
| 16:31.37 | phh | just needs to be formated |
| 16:31.42 | phh | I mean |
| 16:31.43 | phh | 0xff |
| 16:31.48 | phh | like the flash_eraseall |
| 16:31.55 | jonpry | no way |
| 16:32.03 | phh | just try it ... ? |
| 16:32.11 | *** join/#htc-linux M1DLGpc (~M1DLGpc@bb-87-81-252-83.ukonline.co.uk) |
| 16:32.13 | phh | that's definitely how yaffs2 and jffs2 work |
| 16:33.45 | Rajko | dan1j3l_away, or its just luck |
| 16:35.50 | phh | WoZZeR_: perhaps reads logs, we've already done that |
| 16:36.40 | gauner1986 | Markinus: <4>[ 138.181908] dhd_module_init: sdio_register_driver timeout |
| 16:36.43 | gauner1986 | Oo |
| 16:37.13 | jonpry | phh: i got the part number of the flash chip. but samsung doesn't have part numbers anything like it |
| 16:37.25 | phh | jonpry: haha |
| 16:37.52 | gauner1986 | Markinus: now it reboots |
| 16:38.03 | phh | jonpry: what about plain google ? |
| 16:38.07 | jonpry | however latest msm_nand is able to determine onenand capability by examining registers on the chip |
| 16:38.09 | jonpry | not that either |
| 16:38.25 | phh | and it finds onenand capability on our chip ? |
| 16:39.40 | jonpry | i dunno. have to backport |
| 16:40.36 | Markinus | gauner1986: hm?!? |
| 16:40.45 | gauner1986 | Markinus: http://pastebin.com/BRms5g5s |
| 16:41.02 | gauner1986 | Markinus: it just rebooted..... |
| 16:41.04 | Markinus | gauner1986: you didn't change enything else? |
| 16:41.09 | gauner1986 | Markinus: no |
| 16:41.20 | gauner1986 | Markinus: freshly checked out |
| 16:41.41 | Markinus | gauner1986: I booted it 100 times after this change . .hmm |
| 16:41.58 | Markinus | gauner1986: and the firmwrei s in right place? |
| 16:42.01 | Markinus | firmware |
| 16:43.02 | Markinus | gauner1986: please give me your ramconsole |
| 16:43.07 | Markinus | dump |
| 16:43.14 | gauner1986 | Markinus: just posted it |
| 16:43.18 | gauner1986 | http://pastebin.com/BRms5g5s |
| 16:43.56 | *** part/#htc-linux dan1j3l_away (~danijel@93-138-237-253.adsl.net.t-com.hr) |
| 16:47.18 | Markinus | gauner1986: hmm, no errors |
| 16:47.36 | Markinus | gauner1986: what do you using as userspace? |
| 16:47.37 | gauner1986 | it rebooted... |
| 16:47.57 | gauner1986 | [ 138.181908] dhd_module_init: sdio_register_driver timeout |
| 16:48.11 | gauner1986 | hm.. an old version of darkstone's sense |
| 16:48.17 | gauner1986 | with some mods by me |
| 16:50.19 | Markinus | gauner1986: I've mattc 1.7, bus this should be a problem |
| 16:50.40 | gauner1986 | firmware is in place |
| 16:50.52 | gauner1986 | ah ok |
| 16:50.56 | gauner1986 | i had the wrong firmware |
| 16:51.07 | gauner1986 | :) |
| 16:51.19 | Markinus | urgh :) |
| 16:53.11 | HardDisk_WP | hoi |
| 16:53.30 | HardDisk_WP | anyone know a EU place where I can get the display ribbon cable & speaker component of a TP2? |
| 16:54.14 | *** join/#htc-linux michyprima (~opera@host106-197-dynamic.55-79-r.retail.telecomitalia.it) |
| 16:54.29 | gauner1986 | Markinus: encryption doesnt seem to work though |
| 16:54.35 | gauner1986 | Markinus: i have wpa2 configured |
| 16:54.44 | gauner1986 | Markinus: but it shows as unencrypted |
| 16:54.50 | gauner1986 | Markinus: with tethering |
| 16:56.35 | gauner1986 | Markinus: wifi-mac shows correctly |
| 16:58.14 | Markinus | gauner1986: I using wpa2 too |
| 16:58.19 | Markinus | gauner1986: works very fine |
| 16:58.58 | Markinus | gauner1986: ahh, you mean if you configure the tethering network to wpa2? |
| 16:59.06 | gauner1986 | Markinus: yes |
| 16:59.19 | gauner1986 | it doesnt encrypt |
| 16:59.20 | Markinus | I used wpa |
| 16:59.20 | *** join/#htc-linux BHSPitMonkey (~stephen@unaffiliated/bhspitmonkey) |
| 16:59.40 | gauner1986 | ah yeah |
| 16:59.43 | gauner1986 | i also use wpa |
| 16:59.44 | gauner1986 | sorry |
| 16:59.49 | gauner1986 | wpa tkip |
| 16:59.56 | gauner1986 | just shows as unencrypted |
| 17:00.53 | Markinus | gauner1986: I looking too . . |
| 17:01.04 | gauner1986 | every encryption type shows as unencrypted from outside.. |
| 17:02.56 | Markinus | gauner1986: yeah, you'Re right, hmm |
| 17:03.18 | gauner1986 | worked better with the other driver ;) |
| 17:04.14 | Markinus | gauner1986: maybe a configuration problem, will look |
| 17:04.19 | gauner1986 | ok |
| 17:06.26 | Markinus | gauner1986: the true mac address works with both, with the old one too |
| 17:06.41 | gauner1986 | ok |
| 17:07.05 | gauner1986 | so no point in "upgrading" probably |
| 17:07.29 | Markinus | gauner1986: should be better for battery |
| 17:07.50 | Markinus | gauner1986: but encryption is more importand, right :) |
| 17:13.22 | *** join/#htc-linux Blizzzard (5e0522a5@gateway/web/freenode/ip.94.5.34.165) |
| 17:14.45 | *** join/#htc-linux bmnbmn (44cc7f6b@gateway/web/freenode/ip.68.204.127.107) |
| 17:14.45 | *** join/#htc-linux pkirsche (~pkirsche@p5DF562C9.dip.t-dialin.net) |
| 17:16.00 | *** join/#htc-linux Cass (~Cass@87-194-153-242.bethere.co.uk) |
| 17:26.16 | *** join/#htc-linux luc_ (5e3edc93@gateway/web/freenode/ip.94.62.220.147) |
| 17:30.15 | *** part/#htc-linux Baeen (~Bane@ppp118-208-202-97.lns20.hba1.internode.on.net) |
| 17:31.17 | *** join/#htc-linux NeoFlux (~NeoFlux@92.25.230.207) |
| 17:38.20 | *** join/#htc-linux lenix (~irc@lenix.de) |
| 17:40.35 | Cass | hey nice work Markinus, proper mac address on wifi :) |
| 17:40.47 | gauner1986 | and it's read from nand |
| 17:40.48 | gauner1986 | :P |
| 17:40.54 | Cass | yep |
| 17:40.56 | Cass | nice |
| 17:41.06 | gauner1986 | btw |
| 17:41.12 | gauner1986 | time to read compass calibration from nand |
| 17:41.16 | gauner1986 | even more interesting |
| 17:41.22 | Cass | :) |
| 17:41.26 | Cass | who uses compass :P |
| 17:42.19 | gauner1986 | i'd use it if it was working :P |
| 17:42.32 | Cass | fair enough |
| 17:42.50 | *** join/#htc-linux Timber (~Tim@cable-86-56-42-159.cust.telecolumbus.net) |
| 17:44.06 | Cass | ohh and no rmnet as default, even better |
| 17:44.18 | gauner1986 | :P |
| 17:44.25 | Rajko | compass is quite good tho |
| 17:44.34 | gauner1986 | it's good |
| 17:44.41 | gauner1986 | but it points in the wrong direction |
| 17:44.42 | gauner1986 | :P |
| 17:44.43 | Rajko | otherwise gps has no idea where youre going if youre standing |
| 17:44.48 | Cass | haha |
| 17:44.58 | Rajko | gauner1986, michyprima fixed it with static offset on his msm kernels |
| 17:45.01 | Cass | yeah ive nerv had a use for it |
| 17:45.04 | gauner1986 | it's the jack sparrow thing |
| 17:46.07 | Cass | knew i read somewhere someone did that |
| 17:46.23 | gauner1986 | sure you could add an offset |
| 17:46.27 | gauner1986 | but that's kinda uncool |
| 17:46.32 | *** join/#htc-linux Wally (~wally@c-75-73-178-169.hsd1.mn.comcast.net) |
| 17:46.41 | Cass | if it works, its cool |
| 17:47.16 | Rajko | gauner1986, so you read offset from nand, where do you apply it |
| 17:47.41 | gauner1986 | i don't know if it's an offset that you read |
| 17:47.45 | gauner1986 | maybe markinus knows |
| 17:47.46 | gauner1986 | :P |
| 17:47.50 | Rajko | the magnet chip already reads some of its own calibration (gain, etc) from its internal eeprom |
| 17:48.06 | *** join/#htc-linux JesusFreak316 (~John@pool-173-65-107-248.tampfl.fios.verizon.net) |
| 17:48.14 | Rajko | and you can use i2c to set mV offset of its ADC |
| 17:48.43 | Cass | michy have a patch for what he changed ? |
| 17:48.45 | Markinus | gauner1986: hehe, I don't know. But for every device is there a layout parameter in kernel. Maybe it'S something like a 3d orientation of the sensor, we are using in the moment nexus config |
| 17:49.11 | gauner1986 | okay |
| 17:49.17 | Rajko | the matrix in htcleo board.h is used by sensors lib |
| 17:49.19 | Rajko | in userspace |
| 17:49.24 | gauner1986 | so the offset alone can be a fix |
| 17:49.28 | Rajko | however i have no idea of its format |
| 17:49.47 | Rajko | the matrix is in format -1 0 or 1 |
| 17:49.49 | Rajko | no offsets |
| 17:52.48 | Markinus | could someone here prepare a aotubuild service for the new kernel? |
| 17:52.54 | Markinus | autobuild |
| 17:53.10 | gauner1986 | netripper ? :) |
| 17:54.05 | Markinus | NetRipper: ping |
| 17:56.11 | Markinus | gauner1986: could you test something? Change the dir in Makefile/KConfig in drivers/net/wireless from 245 to 204 hwether tethering is working with encryption again? |
| 17:56.22 | *** join/#htc-linux johnb81 (~johnb@78.161.21.244) |
| 17:56.28 | gauner1986 | Markinus: sure |
| 17:57.04 | Markinus | thx |
| 18:01.22 | *** join/#htc-linux rrew (~rrew@78-3-209-190.adsl.net.t-com.hr) |
| 18:12.06 | gauner1986 | Markinus: works again |
| 18:12.14 | Markinus | gauner1986: ok thx! |
| 18:13.07 | *** join/#htc-linux Neonkoala (~Neonkoala@92.20.209.90) |
| 18:14.00 | DuperMan | meh. let myself believe you meant the site:P |
| 18:17.00 | michyprima | anyone thinks it's a good idea pushing my battery driver to git? |
| 18:17.15 | gauner1986 | michyprima: what are the changes? |
| 18:17.25 | michyprima | extended battery support |
| 18:17.34 | michyprima | 2300-2600 mAh batteries |
| 18:17.38 | gauner1986 | michyprima: well.. let us see a diff :) |
| 18:18.44 | michyprima | in first version of my kernel I was just disabling temperature check :) now added battery type detection and correct percent/temperature report |
| 18:18.55 | gauner1986 | sounds good |
| 18:19.03 | Rajko | hey michyprima, why dont you ever post diffs |
| 18:19.13 | gauner1986 | let us see the diff :) |
| 18:19.24 | Rajko | i wanted tosee how you hacked compass offset in msm kernel |
| 18:19.42 | michyprima | I'm on a windows machine right now |
| 18:19.45 | Rajko | (as you didnt do it for evo kernel) |
| 18:20.00 | michyprima | my source is on another one |
| 18:20.13 | michyprima | btw yes you are right didn't add offset to evo's one |
| 18:20.38 | *** join/#htc-linux JesusFreak316 (~John@pool-173-65-107-248.tampfl.fios.verizon.net) |
| 18:20.38 | *** join/#htc-linux Wr4i7h (~abc@a83-132-136-41.cpe.netcabo.pt) |
| 18:20.38 | Rajko | you should post a diff along with binaries |
| 18:21.14 | michyprima | will prepare one |
| 18:21.30 | Rajko | thanks |
| 18:21.41 | gauner1986 | evo's kernel offset is incorrect for me |
| 18:21.43 | gauner1986 | by 45 ° |
| 18:21.50 | Rajko | almost 90 here |
| 18:21.55 | Rajko | correct on r11 msm |
| 18:22.05 | michyprima | yep |
| 18:22.11 | Rajko | this might be caused by the fact that this chip suports mV offsets |
| 18:22.11 | michyprima | it's not so elegant but works |
| 18:22.25 | Rajko | thy might be applied on winmo, but not reset for android |
| 18:22.31 | *** join/#htc-linux kiozen (~kiozen@rgnb-5d879642.pool.mediaWays.net) |
| 18:22.59 | michyprima | who knows ^^ |
| 18:23.05 | Rajko | either that, or the chip is just physically rotated by 90o |
| 18:23.07 | Rajko | on th pcb |
| 18:23.14 | michyprima | yep |
| 18:23.18 | *** join/#htc-linux CrAzY_CbR (d5e74651@gateway/web/freenode/ip.213.231.70.81) |
| 18:23.38 | Rajko | i should try resetting the chip offsets to 0 |
| 18:23.42 | Rajko | on driver start |
| 18:24.06 | michyprima | anyway compass is not so important :) |
| 18:24.10 | gauner1986 | that's why that calib stuff is needed |
| 18:24.13 | *** join/#htc-linux thejeos (~androirc@84.123.186.211.dyn.user.ono.com) |
| 18:24.21 | Rajko | it is to me, i like using gps |
| 18:24.22 | gauner1986 | michyprima: true.. help us on the wakeup issue :) |
| 18:24.37 | Rajko | and navigation software keeps getting confused because im wlaking/driving sideways |
| 18:25.06 | gauner1986 | maybe you are indeed? |
| 18:25.07 | gauner1986 | :P |
| 18:25.12 | Rajko | im not that crazy |
| 18:25.20 | michyprima | gauner1986: any specific work to do? |
| 18:25.22 | Markinus | michyprima: right, if someone would build a external battery interface wit a current measurment between device and battery, and then enable/disable the components to look which is draining |
| 18:25.36 | Markinus | this would be nice :) |
| 18:25.40 | gauner1986 | michyprima: have you noticed the wakeup lags on new evo kernel? |
| 18:26.02 | michyprima | I'm currently using msm based kernel |
| 18:26.42 | michyprima | Markinus: that's not too much a dream on linux :) |
| 18:26.45 | gauner1986 | michyprima: recently someone has reported to have it working correctly with an xdandroid image |
| 18:27.00 | gauner1986 | we have to find what userspace component is making the difference |
| 18:27.11 | michyprima | mmmh |
| 18:27.24 | gauner1986 | maybe that also helps fixing the bug in kernel |
| 18:27.37 | michyprima | is thinking |
| 18:27.58 | *** join/#htc-linux eugenb (~no@dslb-188-100-178-255.pools.arcor-ip.net) |
| 18:28.24 | michyprima | thinking aborted. Kernel panic - not syncing |
| 18:28.27 | michyprima | lol |
| 18:28.50 | gauner1986 | :D |
| 18:29.04 | michyprima | well, that's strange. will not be that easy to find out |
| 18:29.15 | gauner1986 | no :( |
| 18:29.29 | gauner1986 | that bug kills my fun |
| 18:29.56 | michyprima | anyway - some time there's a wakeup lag also on msm kernel |
| 18:29.57 | Rajko | i dont have it really |
| 18:30.05 | michyprima | but doesn't happen anytime |
| 18:30.19 | Rajko | could take up to5 seconds |
| 18:30.25 | Rajko | just dont keep hammering the button |
| 18:30.28 | gauner1986 | sometimes it doesnt even want to come up on evo kernel |
| 18:30.50 | michyprima | if it doesn't I start pushing buttons until it wakes up |
| 18:30.59 | michyprima | randomly |
| 18:31.21 | michyprima | anyway that's not another great solution |
| 18:31.37 | gauner1986 | yeah |
| 18:32.37 | michyprima | that's a sure thing xdandroid images fix that issue? |
| 18:32.58 | gauner1986 | michyprima: letama said so... |
| 18:33.13 | gauner1986 | havent tested xdandroid though |
| 18:33.18 | gauner1986 | but i believe him |
| 18:33.20 | gauner1986 | :) |
| 18:33.35 | michyprima | I also do :) |
| 18:34.35 | michyprima | well, since init script are the same, probably it's something in some .so/.ko file? |
| 18:35.07 | michyprima | just wondering |
| 18:35.12 | gauner1986 | some binary/library |
| 18:35.14 | gauner1986 | not a kernel module |
| 18:35.44 | michyprima | will do some experiments tomorrow |
| 18:35.57 | michyprima | with that xdandroid images |
| 18:36.44 | Rajko | you guys should have a matching tree for build |
| 18:36.49 | Rajko | kernel/rom |
| 18:37.31 | michyprima | dunno why people keeps calling that android builds roms... :D |
| 18:37.48 | michyprima | or kernel "kernal" |
| 18:38.02 | gauner1986 | rom is shorter than image |
| 18:38.04 | gauner1986 | :P |
| 18:39.23 | Rajko | because /system is supposed to be RO |
| 18:39.25 | Rajko | :D |
| 18:39.42 | michyprima | but basically is not on most builds :D |
| 18:40.02 | gauner1986 | allows easier devwork |
| 18:40.04 | gauner1986 | :) |
| 18:40.12 | Rajko | and because its stored in NAND RO on real android devices |
| 18:41.35 | *** join/#htc-linux pH5 (~ph5@e178220021.adsl.alicedsl.de) |
| 18:41.46 | myn | any other rom devs in here? |
| 18:45.46 | michyprima | Rajko: isn't android's NAND also writable? basically /system can always be remounted as RW |
| 18:46.05 | Rajko | sure |
| 18:46.14 | Rajko | if you have root and nand is unlocked |
| 18:46.21 | Rajko | basically if you hacked it |
| 18:46.28 | michyprima | :D |
| 18:47.49 | michyprima | who knows when an htc device with next gen QSD will be released, that's will be my next buy |
| 18:47.52 | Markinus | gauner1986: so, 204 is checked in as default back |
| 18:49.18 | gauner1986 | Markinus: okay :) |
| 18:50.21 | *** join/#htc-linux Andreyxxl[HD2EU] (Andreyxxl@89.32.146.153) |
| 18:50.38 | Rajko | is gitorious fast ? |
| 18:50.39 | DuperMan | michyprima: that'll be half the case for g2 I think.:P |
| 18:50.42 | Rajko | i dont want to wait another 3 hours |
| 18:50.46 | DuperMan | next gen chipset, not so proc |
| 18:55.46 | *** join/#htc-linux flagada (58a1e24e@gateway/web/freenode/ip.88.161.226.78) |
| 18:57.00 | *** join/#htc-linux idcom (~AndChat@comyns.plus.com) |
| 18:59.55 | Andreyxxl[HD2EU] | is xda down? why? |
| 19:02.12 | *** join/#htc-linux Echo31 (~olivier@mir31-4-82-240-194-54.fbx.proxad.net) |
| 19:03.37 | *** join/#htc-linux Kasjopaja (~Tina@p57BC025D.dip0.t-ipconnect.de) |
| 19:03.49 | *** join/#htc-linux johnb81 (~johnb@78.161.21.244) |
| 19:07.08 | Rajko | you touch yourself at night |
| 19:07.43 | *** join/#htc-linux hyperfire21 (~nun@c-98-223-15-190.hsd1.il.comcast.net) |
| 19:08.24 | *** join/#htc-linux Pepe__ (58800639@gateway/web/freenode/ip.88.128.6.57) |
| 19:19.27 | *** part/#htc-linux pkirsche (~pkirsche@p5DF562C9.dip.t-dialin.net) |
| 19:24.32 | *** part/#htc-linux michyprima (~opera@host106-197-dynamic.55-79-r.retail.telecomitalia.it) |
| 19:25.19 | *** join/#htc-linux invisiblegod (invisibleg@bl8-70-243.dsl.telepac.pt) |
| 19:27.34 | *** join/#htc-linux fish1209 (~fish@unaffiliated/fish0912) |
| 19:29.39 | *** join/#htc-linux Jack-E (~chatzilla@host86-143-166-160.range86-143.btcentralplus.com) |
| 19:29.51 | *** join/#htc-linux thejeos (~androirc@84.123.186.211.dyn.user.ono.com) |
| 19:36.01 | *** join/#htc-linux toastcfh (~toastcfh@29-37.200-68.tampabay.res.rr.com) |
| 19:36.20 | *** join/#htc-linux Kasjopaja23 (~Tina@p57BC2FA6.dip0.t-ipconnect.de) |
| 19:39.28 | jonpry | wozzer_: any luck? |
| 19:39.36 | *** join/#htc-linux swc|666 (~neopwn@unaffiliated/swc666/x-4934821) |
| 19:45.01 | *** join/#htc-linux stunt (~fuck@c-76-114-36-123.hsd1.ca.comcast.net) |
| 19:45.47 | *** join/#htc-linux leobaillard (~leobailla@leobaillard.org) |
| 19:52.30 | manusfreedom | we have again change GIT repo.... it's hard to follow you guys... |
| 19:52.39 | gauner1986 | what? |
| 19:52.41 | gauner1986 | again? |
| 19:52.42 | gauner1986 | :D |
| 19:52.50 | manusfreedom | 2 day ago.. |
| 19:52.55 | manusfreedom | I have not noticed it... |
| 19:53.14 | gauner1986 | current is http://gitorious.org/linux-on-wince-htc/linux_on_wince_htc/commits/master |
| 19:53.25 | gauner1986 | because linuxtogo has connectivity problems |
| 19:53.38 | manusfreedom | ok |
| 19:53.47 | manusfreedom | for me it always work.... |
| 19:53.52 | gauner1986 | it works |
| 19:53.55 | gauner1986 | but it is slow |
| 19:54.07 | manusfreedom | ha... |
| 19:54.25 | Rajko | i agree, stay on gitorious |
| 19:54.47 | *** join/#htc-linux fcna (5d1c57c5@gateway/web/freenode/ip.93.28.87.197) |
| 19:55.38 | ali1234 | you are free to mirror on both |
| 19:55.43 | ali1234 | no need to pick one or the other |
| 19:56.31 | manusfreedom | yes but it's not easy to follow the dev if we works on both one week and on the other one another week... |
| 19:56.44 | gauner1986 | true |
| 19:56.51 | gauner1986 | so lets stay where we are now |
| 19:56.52 | gauner1986 | :P |
| 19:57.03 | manusfreedom | no prob for me |
| 19:59.47 | Markinus | manusfreedom: sorry for that, but I had to much problems on linuxtogo |
| 20:00.09 | Markinus | now we stay wo we are, right :) |
| 20:04.23 | *** join/#htc-linux MN (5685c0dc@gateway/web/freenode/ip.86.133.192.220) |
| 20:04.26 | MN | Hi |
| 20:05.28 | MN | any news |
| 20:06.13 | Rajko | MN, why dont you just check the git commit logs and such |
| 20:06.36 | MN | yh i will |
| 20:08.18 | *** join/#htc-linux ImHos (pIRCuser35@86.57.242.241) |
| 20:10.01 | MN | ~seen cotulla |
| 20:10.06 | apt | cotulla <~opera@nat004-252-205-109.tvoe.tv> was last seen on IRC in channel #htc-linux, 21h 50m 28s ago, saying: 'gotta go bb'. |
| 20:10.14 | MN | ~seen [Delenn] |
| 20:10.14 | apt | [delenn] <~opera@nat004-252-205-109.tvoe.tv> was last seen on IRC in channel #htc-linux, 7h 2m 3s ago, saying: ':D'. |
| 20:16.07 | *** join/#htc-linux en1gma (~abc@173-31-88-49.client.mchsi.com) |
| 20:17.57 | *** join/#htc-linux Kasjopaja (~Tina@p57BC2DA3.dip0.t-ipconnect.de) |
| 20:18.53 | *** join/#htc-linux Echo31 (~olivier@mir31-4-82-240-194-54.fbx.proxad.net) |
| 20:23.16 | gauner1986 | Markinus: what are you currently looking at? |
| 20:23.52 | *** join/#htc-linux programmer8922 (~Evan@67.219.166.182) |
| 20:25.21 | *** join/#htc-linux Scepterr69 (~scepterr@ool-18b92277.dyn.optonline.net) |
| 20:25.28 | *** join/#htc-linux M1DLGpc (~M1DLGpc@bb-87-81-252-83.ukonline.co.uk) |
| 20:29.41 | *** join/#htc-linux darkstar62 (~darkstar6@97-126-99-222.tukw.qwest.net) |
| 20:31.09 | *** join/#htc-linux Axion_ (6277ca90@gateway/web/freenode/ip.98.119.202.144) |
| 20:37.43 | *** join/#htc-linux thejeos (~androirc@84.123.186.211.dyn.user.ono.com) |
| 20:41.32 | *** join/#htc-linux Kasjopaja (~Tina@p57BC2DA3.dip0.t-ipconnect.de) |
| 20:43.50 | *** join/#htc-linux swc|666 (~neopwn@unaffiliated/swc666/x-4934821) |
| 20:43.57 | *** join/#htc-linux iDavid (c3d35597@gateway/web/freenode/ip.195.211.85.151) |
| 20:45.20 | iDavid | Xda not working ? |
| 20:45.22 | *** join/#htc-linux hyperfire21 (~nun@c-98-223-15-190.hsd1.il.comcast.net) |
| 20:51.43 | programmer8922 | "Forums are down: server hoster connection has failed || "it's expected we'll see a full restoration of connectivity before 3:30PM CDT" by official hoster information || moved to 4.30 CDT" |
| 20:52.13 | programmer8922 | so, I guess not |
| 20:54.20 | *** join/#htc-linux leodog (6dbd5cf7@gateway/web/freenode/ip.109.189.92.247) |
| 20:56.02 | iDavid | Aight, thanks for the info |
| 21:01.31 | *** join/#htc-linux camro (~camro@89-104-29-101.customer.bnet.at) |
| 21:01.41 | *** join/#htc-linux blackplaty (~blackplat@host55-108-dynamic.5-87-r.retail.telecomitalia.it) |
| 21:03.58 | *** join/#htc-linux Kidrepair (18f6b653@gateway/web/freenode/ip.24.246.182.83) |
| 21:04.40 | Kidrepair | Hey, the forum is not working right nw, but I am trying to find out why my downloaded apps keep crashing |
| 21:09.55 | *** join/#htc-linux gauner1986 (~Adium@p508C681E.dip.t-dialin.net) |
| 21:11.43 | Rajko | wasnt all the mtd stuff supposed to be compiled into kernel, not as module |
| 21:15.53 | Rajko | i had to do that in order for it to load, because it loads before init |
| 21:16.07 | *** join/#htc-linux Hunterkll (~Hunterkll@dynamic-acs-24-112-135-245.zoominternet.net) |
| 21:16.09 | Hunterkll | Mmmmmm |
| 21:16.15 | Hunterkll | htc-solaris is coming along very slowly |
| 21:16.23 | Hunterkll | must get any kind of boot working... :/ |
| 21:19.49 | gauner1986 | who needs solaris on a phone? |
| 21:19.50 | gauner1986 | :P |
| 21:20.38 | noellenchris | gauner1986: u testing newer evo kernel, or still fighting with slow wakeup? |
| 21:21.07 | gauner1986 | slow wakeup is still shit |
| 21:21.17 | Rajko | about the nand workaround, <4>[ 14.344312] Leo NAND wrfail it 0 flash_status 00c03030 |
| 21:21.17 | Rajko | <4>[ 14.347461] Leo NAND wrfail it 1 flash_status 00c02030 |
| 21:22.35 | epsas | hmm |
| 21:22.51 | epsas | is there a way to flash an HTC apache over USB? |
| 21:23.58 | *** join/#htc-linux gauner1986 (~Adium@p508C681E.dip.t-dialin.net) |
| 21:27.10 | camro | hi @ all |
| 21:27.29 | camro | is it true - xda forum seems to be down ? - or only for me ? |
| 21:27.47 | iDavid | yes |
| 21:29.08 | *** join/#htc-linux jeos (~androirc@84.123.186.211.dyn.user.ono.com) |
| 21:29.57 | *** join/#htc-linux lenix (~irc@lenix.de) |
| 21:31.36 | *** join/#htc-linux jonolo (~jonolo@87.75.139.17) |
| 21:35.48 | Hunterkll | gauner1986, if my project benchmarks faster then your project... :P |
| 21:35.49 | Hunterkll | lmao |
| 21:35.51 | Hunterkll | soldroid |
| 21:35.53 | *** join/#htc-linux Rajko (~Rajko@cable-188-2-156-189.dynamic.sbb.rs) |
| 21:36.16 | Hunterkll | i'm gonna make android work on solaris kernel and submit compatability patches to google and hope for ultrasparc phones in the future... XD |
| 21:36.34 | gauner1986 | hunterkll: rofl.. is that really gonna happen? ;) |
| 21:36.56 | Hunterkll | I'm working on the solaris booting first |
| 21:37.01 | Hunterkll | then we can move on to ZFS nand etc |
| 21:37.02 | Hunterkll | :P |
| 21:38.11 | Rajko | u mad |
| 21:38.25 | Rajko | i dunno why this error http://codepad.org/b0rt71Jn |
| 21:40.48 | Hunterkll | wait |
| 21:40.53 | Hunterkll | Leo NAND support? O.o |
| 21:40.58 | Hunterkll | who is doing this :P |
| 21:41.10 | DuperMan | ALL the cool kids |
| 21:41.17 | Hunterkll | lol |
| 21:41.21 | Hunterkll | i've been out off and on for a while |
| 21:41.34 | Hunterkll | when is the htc-msm tree going to see new commits? :o |
| 21:41.38 | *** join/#htc-linux thejeos (~androirc@84.123.186.211.dyn.user.ono.com) |
| 21:42.02 | gauner1986 | we have moved to somewhere else |
| 21:42.03 | DuperMan | dunno... wait msm? |
| 21:42.12 | gauner1986 | because of bad connectivity on linuxtogo |
| 21:42.18 | Hunterkll | what? really? |
| 21:42.24 | Hunterkll | does netripper have his autobuild repointed? |
| 21:42.28 | gauner1986 | http://www.gitorious.com/linux-on-wince-htc/linux_on_wince_htc |
| 21:42.34 | gauner1986 | don't think so |
| 21:43.08 | Hunterkll | damnit |
| 21:43.15 | Hunterkll | well, this is the sort of activity i wanted |
| 21:43.24 | Hunterkll | i kept looking for htc-msm linux on google to find the link on my phone, lol |
| 21:43.26 | *** join/#htc-linux C_h_r_i_s (~ja@dslb-088-065-073-014.pools.arcor-ip.net) |
| 21:44.01 | Hunterkll | bah, i don't like gitorious's layout :P |
| 21:44.09 | DuperMan | I might be and probably am totally wrong, but it feels like msm tree's gonna be deprecated soon |
| 21:44.17 | DuperMan | :P |
| 21:44.25 | DuperMan | sorry if it's total fud |
| 21:44.42 | Hunterkll | huh? |
| 21:44.50 | Hunterkll | i'm talking about all the htc trees? O.o |
| 21:44.51 | Hunterkll | sigh |
| 21:44.53 | DuperMan | evo tree's the hot new thing now |
| 21:44.57 | DuperMan | oh sorry |
| 21:45.03 | DuperMan | was only talking about leo |
| 21:45.05 | Hunterkll | do i have to get my hands dirty in linux code and unify this crap? |
| 21:45.19 | Hunterkll | my best advice? take latest upstream kernel.org and start getting that up to speed |
| 21:45.20 | gauner1986 | solaris freak? |
| 21:45.21 | gauner1986 | :) |
| 21:45.22 | Hunterkll | if you want to future-proof |
| 21:46.35 | NetRipper | gauner1986, whats up with the autobuild |
| 21:47.10 | gauner1986 | NetRipper: as markinus and others have problems with linuxtogo connectivity we're currently working on this git http://www.gitorious.com/linux-on-wince-htc/linux_on_wince_htc |
| 21:47.24 | Hunterkll | NetRipper, everyone abandoned the git that us oldskool users enjoy? :P |
| 21:47.27 | NetRipper | is that just the ltg tre hosted on gitorious? |
| 21:47.32 | NetRipper | tree* |
| 21:47.38 | gauner1986 | the evo one, yes |
| 21:47.54 | NetRipper | oh you guys are working on a new tree? |
| 21:48.04 | gauner1986 | yeah |
| 21:48.06 | NetRipper | ok |
| 21:48.09 | NetRipper | porting the old content? |
| 21:48.09 | gauner1986 | we ported evo tree |
| 21:48.12 | NetRipper | ok |
| 21:48.17 | NetRipper | (does it work better?) |
| 21:48.30 | gauner1986 | kinda, some features started to work out of the box |
| 21:48.34 | gauner1986 | and battery is better |
| 21:48.41 | gauner1986 | tether for example |
| 21:48.43 | gauner1986 | wifi tether |
| 21:48.53 | Hunterkll | heh |
| 21:48.58 | NetRipper | ok |
| 21:49.03 | Hunterkll | i need to get some non linux systems going here |
| 21:49.06 | Hunterkll | er, non windows |
| 21:49.06 | NetRipper | you guys use the master branch on that tree? |
| 21:49.06 | gauner1986 | netripper: but we have a big problem currently |
| 21:49.19 | NetRipper | how so |
| 21:49.21 | Hunterkll | i've gone from not using windows for years to using nothing but in the span of weeks :( |
| 21:49.21 | gauner1986 | netripper: waking up the phone does take very long |
| 21:49.29 | gauner1986 | and we don't know why really |
| 21:49.35 | gauner1986 | maybe you can look into it? :) |
| 21:49.53 | NetRipper | i first have to get things with haret in order... i've been out of the running for a while |
| 21:49.57 | gauner1986 | sometimes the phone doesnt even want to wake up at all for two minutes or so |
| 21:50.09 | NetRipper | lol |
| 21:50.15 | Hunterkll | well then |
| 21:50.19 | NetRipper | but it does wake up eventually |
| 21:50.28 | Hunterkll | you just scared me far far away from your tree |
| 21:50.28 | Hunterkll | :P |
| 21:50.28 | gauner1986 | yeah |
| 21:50.29 | gauner1986 | it always wakes up |
| 21:50.31 | gauner1986 | question is when |
| 21:50.32 | gauner1986 | :P |
| 21:50.49 | gauner1986 | this tree rocks |
| 21:50.50 | NetRipper | hehe funny, maybe the ARM9 triggers the wakeup |
| 21:50.54 | gauner1986 | except of that issue |
| 21:51.04 | NetRipper | does standby work on the old tree then? |
| 21:52.18 | gauner1986 | it did |
| 21:52.20 | gauner1986 | yes |
| 21:52.24 | gauner1986 | it does probably |
| 21:52.32 | NetRipper | lol doesnt sound very convincing |
| 21:52.48 | gauner1986 | i think it does.. havent tested for a long time |
| 21:52.53 | NetRipper | i'll add autobuild for that tree |
| 21:52.53 | gauner1986 | but as there have been no commits |
| 21:53.02 | gauner1986 | ok, nice |
| 21:53.07 | Hunterkll | standby as in regular C3 or just cutting down devices |
| 21:53.07 | NetRipper | i dont have time to look into this problem specifically |
| 21:53.14 | Hunterkll | er, S2->C3 |
| 21:53.18 | gauner1986 | netripper :( |
| 21:53.32 | NetRipper | but it sounds like the gpio interrupt is put to sleep |
| 21:53.39 | NetRipper | while it should be in the 'awake' mode |
| 21:53.57 | gauner1986 | hm |
| 21:54.00 | NetRipper | you can set a flag on gpio's to flag them as "when this interrupt fires, wake up" |
| 21:54.26 | gauner1986 | i'll tell markinus tomorrow.. i don't have a clue about this |
| 21:54.40 | NetRipper | if the wakeup currently is random.. then it sounds more like the arm9 receives some sort of event over the GSM/UMTS network causing it to wake up... and then starts processing the keypad wakeup |
| 21:54.56 | NetRipper | does it wakeup on an incoming call? |
| 21:55.05 | gauner1986 | it wakes up if you plug in usb |
| 21:55.07 | gauner1986 | instantly |
| 21:55.25 | gauner1986 | and while usb is connected you can wake it up using the button anytime you want |
| 21:55.34 | NetRipper | yea because it doesnt really go to standby |
| 21:55.44 | NetRipper | (probably) |
| 21:56.21 | gauner1986 | havent tested incoming call yet |
| 21:56.27 | gauner1986 | lets see |
| 21:57.04 | eugenb | NetRipper when will be an autobuild for this tree available? :P |
| 21:57.40 | NetRipper | im fixing it right now, so hopefully in an hour or so (but i'll be asleep then, so might be in the morning before i check if it went ok) |
| 21:57.53 | NetRipper | need to do some changes to the script, but it might fail of course ;) |
| 21:58.18 | eugenb | ah kk :D so now we'll only have autobuilds of evo tree's? |
| 21:58.24 | *** join/#htc-linux hyperfire21 (~nun@c-98-223-15-190.hsd1.il.comcast.net) |
| 21:58.42 | NetRipper | both, but i'll put them in different directories |
| 21:59.23 | eugenb | okay^^ |
| 22:02.57 | Major_Sarcasm | Interesting that a few are jumping to the Evo tree... I'm running Bangsters 1.2 (Nexus) with Michy's r11 (XIP) and it's the best combination of battery life and speed that I've found yet. |
| 22:03.38 | *** join/#htc-linux JesusFreak316 (~John@pool-173-65-107-248.tampfl.fios.verizon.net) |
| 22:03.42 | Hunterkll | what? |
| 22:05.24 | Hunterkll | how's it interesting? more similar hardware already established codebase = no brainer for further fixing |
| 22:06.20 | eugenb | right^^ |
| 22:06.30 | Major_Sarcasm | I tried Michy's Evo kernel and had issues |
| 22:06.52 | *** join/#htc-linux surge (surge@pool-98-118-157-221.bflony.fios.verizon.net) |
| 22:06.58 | *** join/#htc-linux mistadman1 (~mistadman@166.133.72.61) |
| 22:07.29 | Major_Sarcasm | (it wasn't a criticism, peace ;) ) |
| 22:08.38 | Hunterkll | of course, there's always issues... :P |
| 22:09.18 | Major_Sarcasm | Indeed. Without issues, we wouldn't need devs for solutions |
| 22:09.39 | Hunterkll | no, you still would |
| 22:09.40 | Hunterkll | :P |
| 22:09.43 | *** join/#htc-linux F-D (~Stoned@92.30.163.4) |
| 22:11.41 | gauner1986 | netripper: phone wakes up on call.. takes five secs though.. very strange |
| 22:12.59 | NetRipper | aha |
| 22:13.49 | eugenb | autobuild started ^-^ :P |
| 22:14.01 | NetRipper | yep you f5'ed correctly |
| 22:14.02 | NetRipper | ;) |
| 22:14.18 | eugenb | :D |
| 22:14.46 | gauner1986 | F5 is an art of itself |
| 22:14.55 | NetRipper | true |
| 22:18.08 | eugenb | btw has evo kernel , bt hid support? :P |
| 22:18.20 | gauner1986 | i dont know |
| 22:18.33 | gauner1986 | check it out :P |
| 22:19.04 | NetRipper | http://oe.netripper.com/files/htcleo_autobuild_evo_tree/ |
| 22:19.09 | F-D | BT is very fast on evo kernel to my headset |
| 22:19.20 | F-D | naice one bruvva |
| 22:19.21 | F-D | :D |
| 22:19.56 | gauner1986 | but i dont have sound on my headset |
| 22:19.58 | gauner1986 | during call |
| 22:19.59 | gauner1986 | :( |
| 22:20.08 | *** join/#htc-linux toi (~toi@d54C2AA76.access.telenet.be) |
| 22:20.11 | eugenb | kay, now i only need a working build to use with this kernel :P |
| 22:20.11 | F-D | isnt that build related? android build |
| 22:21.19 | *** join/#htc-linux Scrizz (~Scrizz@pool-96-254-167-115.tampfl.fios.verizon.net) |
| 22:21.28 | F-D | did anyone figure out the micro pauses in music yet? |
| 22:21.41 | *** join/#htc-linux Neo31 (~Neo31@unaffiliated/neo31) |
| 22:21.52 | eugenb | NetRipper, already downloaded the kernel files :P, gonna try it tomorrow xD gtg sleep :D good night everyone xD |
| 22:21.59 | Scrizz | gnight |
| 22:22.13 | F-D | ello scrizz |
| 22:22.34 | Scrizz | ello |
| 22:22.37 | Scrizz | :) |
| 22:22.40 | Scrizz | long time no c |
| 22:23.06 | F-D | very loud on my bt headset :D |
| 22:23.49 | noellenchris | gauner1986: are u using the same kernel from autobuild w/markinus's changes, and still have wakeup issues? |
| 22:24.06 | gauner1986 | i compiled it myself |
| 22:24.19 | gauner1986 | and wakeup issues are present on my sense build |
| 22:24.59 | noellenchris | gauner1986: i was running yours and i didn't have the wake up issues until after about 2 days, then Cass helped me ruin my day...lol |
| 22:25.12 | gauner1986 | hm |
| 22:25.14 | gauner1986 | dunno |
| 22:26.03 | noellenchris | the issues were gone once I use LeTama's, and also not present for me with Michy's , but I'm using CM6 and I think your using sense build right |
| 22:26.08 | *** join/#htc-linux JesusFreak316 (~John@pool-173-65-107-248.tampfl.fios.verizon.net) |
| 22:26.46 | *** join/#htc-linux GNUtoo|laptop (~gnutoo@host55-144-dynamic.54-79-r.retail.telecomitalia.it) |
| 22:27.42 | DuperMan | I t-h-i-n-k I had the issue with michy's |
| 22:27.54 | NetRipper | nexusone tree can now be found under http://oe.netripper.com/files/htcleo_autobuild_nexus_tree/ |
| 22:28.06 | NetRipper | the old directory is obsoleted (http://oe.netripper.com/files/htcleo_autobuild/) |
| 22:28.12 | DuperMan | ^^ |
| 22:28.17 | noellenchris | maybe u can update some of your build packages, I think CM6 had some issues a week or 2 ago with wake up also. You may be fighting 2 different wake up issues....inject some caffeine into that baby... |
| 22:29.30 | F-D | booting new evo autobuild kernel |
| 22:29.50 | F-D | bluescreen |
| 22:29.51 | F-D | lol |
| 22:30.01 | gauner1986 | noellenchris: es.. sense :) |
| 22:30.06 | noellenchris | it's pretty ehh? |
| 22:30.33 | noellenchris | blue screen.....lol |
| 22:30.33 | F-D | 2nd boot working |
| 22:31.21 | gauner1986 | i like it |
| 22:31.29 | gauner1986 | because it's just quality |
| 22:31.32 | gauner1986 | everything is fine tuned |
| 22:31.33 | gauner1986 | :) |
| 22:31.37 | gauner1986 | no surprises |
| 22:31.48 | noellenchris | gauner1986: maybe try another build on another sd card and boot it up with a newer sense and latest evo kernel. Then you can preserve your masterpiece |
| 22:32.22 | F-D | its alive |
| 22:32.31 | F-D | does that mean build successful? |
| 22:32.44 | *** join/#htc-linux Jack-E (~chatzilla@host86-143-166-160.range86-143.btcentralplus.com) |
| 22:32.47 | gauner1986 | try it |
| 22:32.49 | gauner1986 | :) |
| 22:32.55 | noellenchris | I keep an extra card with a known good build with me all the time...haven't had to switch much, but if I'm not home it will get me by |
| 22:33.28 | F-D | interesting problem... flash fires too early on camera and upi get a dark picture lol |
| 22:33.30 | *** join/#htc-linux mackie (~mackie@124.20.121.70.cfl.res.rr.com) |
| 22:34.02 | *** part/#htc-linux mackie (~mackie@124.20.121.70.cfl.res.rr.com) |
| 22:36.31 | F-D | now thats interesting... i get the pauses again in music which i didnt have with the kernel released by mdeejay with his evo build..... |
| 22:36.58 | F-D | which was based from this tree to i believe (had the flashlight on boot) |
| 22:43.33 | *** join/#htc-linux jdp_ (jdp@theorize.org) |
| 22:46.08 | flagada | F- D : lol evo mdeejay its a letama its me send pack letama evo (build letama evo and letama kernel) |
| 22:46.36 | jonpry | is codeaurora down? |
| 22:47.40 | *** join/#htc-linux Jack-E (~chatzilla@host86-143-166-160.range86-143.btcentralplus.com) |
| 22:47.58 | Scrizz | ? |
| 23:01.43 | *** join/#htc-linux F-D (~Stoned@92.30.163.73) |
| 23:01.53 | F-D | stupid ghey internets |
| 23:02.37 | DuperMan | roshambu 'em for connectivity |
| 23:04.45 | *** join/#htc-linux Neo31 (~Neo31@unaffiliated/neo31) |
| 23:04.59 | F-D | bdi_queue_work: wake up flush-179:0 FAIL retries 4 : wtf |
| 23:06.15 | *** join/#htc-linux Scepterr (~scepterr@ool-18b92277.dyn.optonline.net) |
| 23:09.09 | *** join/#htc-linux Opius (~Opius@cpc2-addl4-2-0-cust309.6-3.cable.virginmedia.com) |
| 23:18.18 | F-D | flash firing early seems to be a common theme on the evo kernels ... maybe needs looking at. |
| 23:25.20 | Cass-out | was a debug thing to ensure kernel was alive |
| 23:25.35 | Cass-out | i kinda like it, nostalgic for the old days |
| 23:26.00 | Hunterkll | yea that's not a bug per say :P |
| 23:28.38 | noellenchris | I think he is talking about actually taking a photo, as the pictures are dark |
| 23:28.55 | Cass-out | k |
| 23:30.05 | *** join/#htc-linux manatails (~admin@reactos/tester/manatails) |
| 23:36.40 | *** join/#htc-linux Baeen (~Bane@ppp118-208-202-97.lns20.hba1.internode.on.net) |
| 23:45.07 | noellenchris | hey Cass, anything new? |
| 23:45.44 | noellenchris | netripper updated autobuild and added EVO tree autobuild |
| 23:45.53 | *** join/#htc-linux F-D (~Stoned@92.30.77.142) |
| 23:46.08 | Cass | noellenchris, nah nothing new |
| 23:46.56 | F-D | yes i meant in pictures |
| 23:47.03 | F-D | damn internet wont stay connected lol |
| 23:47.09 | noellenchris | XDA is finally back up |
| 23:47.42 | noellenchris | F-D: did you reboot |
| 23:48.04 | F-D | my pc? |
| 23:49.41 | noellenchris | hd2 |
| 23:49.48 | F-D | yes |
| 23:49.54 | noellenchris | just checkin |
| 23:50.13 | F-D | i gotta go.. work in 6 hours lol |
| 23:50.19 | F-D | cyas tomorrow =) |
| 23:50.26 | noellenchris | nite |
| 23:50.30 | *** part/#htc-linux F-D (~Stoned@92.30.77.142) |
| 23:58.10 | DuperMan | evo tree autobuild bluescreens? |
| 23:58.13 | DuperMan | :D |
