| 00:11.36 | CIA-4 | 03koen 07org.oe.dev * r896b4049... 10/conf/distro/preferred-gpe-versions-2.7.inc: GPE 2.7: update gpe-bluetooth to 0.42 |
| 00:19.39 | gerwinin | Would it be possible to make use of an old screen of a pda (say a really cheap one) for another project with an epia ? |
| 00:21.00 | *** join/#oe mithro (n=tim@c213-100-42-188.swipnet.se) |
| 00:22.09 | *** join/#oe Geo_KM (n=keith@bh02i525f01.au.ibm.com) |
| 00:23.20 | koen | gerwinin: yes, but it could be difficult |
| 00:36.10 | *** part/#oe mreimer (n=mreimer@bilbo.vpop.net) |
| 00:37.01 | *** join/#oe ka6sox-office (n=tking@nslu2-linux/ka6sox) |
| 00:56.02 | *** join/#oe [g2] (n=g2@nslu2-linux/g2) |
| 01:06.40 | *** join/#oe noclouds (n=mhfan@60.166.36.212) |
| 01:53.02 | *** join/#oe qip|Virus|da (n=Thomas@p549CD7A1.dip.t-dialin.net) |
| 02:05.51 | *** join/#oe andersee (n=andersee@codepoet.org) |
| 02:06.48 | *** join/#oe mrz80 (n=scotsman@n128-227-1-80.xlate.ufl.edu) |
| 02:11.38 | *** join/#oe raster (n=raster@vagw.valinux.co.jp) |
| 02:27.42 | *** join/#oe aquadran_ (i=pablo@scummvm/undead/aquadran) |
| 02:52.56 | *** join/#oe hufnus (n=slonsiki@m5b8b36d0.tmodns.net) |
| 03:23.12 | *** join/#oe hufnus (n=slonsiki@m5b8b36d0.tmodns.net) |
| 04:04.14 | *** join/#oe minipanda (n=zhanght@221.122.51.131) |
| 04:04.55 | *** part/#oe minipanda (n=zhanght@221.122.51.131) |
| 04:08.46 | *** join/#oe dkey (i=nobody@193.170.48.236) |
| 04:23.26 | *** join/#oe subdue (n=chopstix@198-79-109-131.hi.net) |
| 04:54.09 | dwildes | are there any .bb packages for hylafax? |
| 05:16.53 | *** join/#oe __law__ (n=law@mail.stiftadmont.at) |
| 05:17.48 | *** join/#oe Geo_KM (n=keith@bh02i525f01.au.ibm.com) |
| 05:29.49 | ZonE-HaKin9| | hey if i started a bitbake task-bootstrap and it was a 2.6 kernel version (which didn't work) and wanted to restart it again with the 2.4 kern do i have to start from scratch or what? |
| 05:31.59 | emte | pretty much |
| 05:45.17 | *** join/#oe eumel (n=chatzill@p5483236B.dip0.t-ipconnect.de) |
| 05:51.45 | emte | hey good news for monotone: njs emte: and we have a Plan For Fixing That, hopefully will be working in a ~few months |
| 05:51.59 | emte | re: speed and computational req |
| 05:52.45 | emte | bit of discussion about monotone etc in the mercurial channel |
| 05:53.16 | emte | sounds like mpm is gathering info and stuff for his presentation at linux.conf.au |
| 05:54.52 | *** join/#oe Geo_KM (n=keith@ppp63-196.lns1.cbr1.internode.on.net) |
| 05:56.38 | *** join/#oe Geo_KM (n=keith@ppp63-196.lns1.cbr1.internode.on.net) |
| 06:05.40 | *** join/#oe Geo_KM (n=keith@ppp63-196.lns1.cbr1.internode.on.net) |
| 06:18.51 | *** join/#oe mithro (n=tim@c213-100-42-188.swipnet.se) |
| 06:28.04 | *** join/#oe jipi (n=jipi@cm54.gamma182.maxonline.com.sg) |
| 06:39.09 | *** join/#oe DaKa (n=david@nslu2-linux/daka) |
| 06:45.40 | *** join/#oe JuergenE (i=juergen@140.78.95.63) |
| 06:52.32 | *** join/#oe TomPower (i=thomas@140.78.95.57) |
| 07:06.15 | *** join/#oe koobla_home (n=Simon@cm49-137.liwest.at) |
| 07:14.21 | *** join/#oe keturn (n=kevint@pdpc/supporter/sustaining/keturn) |
| 07:32.28 | RP | morning all |
| 07:47.18 | ZonE-HaKin9|afk | hey RP :) |
| 07:50.30 | hrw|work | hi |
| 07:53.40 | *** join/#oe cedric (n=cedric@LAubervilliers-151-11-32-8.w193-251.abo.wanadoo.fr) |
| 07:54.12 | ZonE-HaKin9| | hi hrw|work |
| 07:59.50 | *** join/#oe zecke (i=fakeuser@p54BD3115.dip0.t-ipconnect.de) |
| 08:00.56 | RP | hi hrw|work |
| 08:08.18 | XorA | morning |
| 08:09.17 | hrw|work | hi rp xora zone |
| 08:10.42 | RP | hi XorA |
| 08:12.23 | hrw|work | RP: tried 2.6.13-rc6-mm2? |
| 08:12.57 | RP | hrw|work: No, I'm enjoying a brief period of stabliity ;-) |
| 08:13.03 | RP | hrw|work: How's it looking? |
| 08:13.28 | hrw|work | RP: didnt tried wifi or bt yet - otherwise works ok |
| 08:14.47 | RP | hrw|work: Excellent. I think 2.6.13-rc5-mm1 is going to be the new stable version for a while and I'll remove 2.6.11... |
| 08:15.25 | hrw|work | great |
| 08:15.36 | hrw|work | now we need to get autorotate in opie |
| 08:15.56 | RP | hrw|work: Autorotate should be working with that kernel? |
| 08:16.03 | RP | I thought I'd hacked it to work :-/ |
| 08:17.47 | ZonE-HaKin9| | morning XorA |
| 08:17.55 | hrw|work | RP: atleast it does not work on my c760 |
| 08:18.01 | XorA | RP: fix hostap before deleting 2.6.11 :-) |
| 08:18.27 | RP | XorA: Has someone not done that? |
| 08:18.48 | XorA | RP: multi function cards need the in kernel hostap or external needs device table |
| 08:19.27 | RP | ah, and I haven't added it - right :) |
| 08:19.59 | hrw|work | <PROTECTED> |
| 08:20.03 | hrw|work | is in 2.6.13-rc7 |
| 08:20.49 | RP | hrw|work: I know ;-) |
| 08:21.24 | ZonE-HaKin9| | RP: so i just d/l the pre-built cross-tools from handhelds.org? |
| 08:22.02 | RP | ZonE-HaKin9|: I have no idea as its a long time since I downloaded it - what does the wiki say? |
| 08:22.27 | RP | XorA: I'll remember to fix it eventually :) |
| 08:22.57 | ZonE-HaKin9| | RP: to d/l the file :/ |
| 08:24.33 | RP | ZonE-HaKin9|: And gives you a link to hh.org... |
| 08:26.17 | ZonE-HaKin9| | RP: d/l'ing it now i think i should be able to work the rest out now |
| 08:28.48 | ZonE-HaKin9| | ALL: would it be possable to re-config the poodle mem setting like the collie? ie 32-32 64-0 ?? |
| 08:34.24 | hrw|work | ZonE-HaKin9|: poodle has 32M only |
| 08:38.11 | ZonE-HaKin9| | D'oh |
| 08:38.20 | ZonE-HaKin9| | maybe its time to sell it?? |
| 08:40.09 | XorA | ZonE-HaKin9|: or donate it to oz.org |
| 08:44.11 | ZonE-HaKin9| | i wish i couldd but just bought it and don't have much $$$ atm due my little baby boy :) but from the money i would get from selling it i woulddn't have much to get a sl-c3100 to put all my work into? |
| 08:45.44 | hrw|work | poodle will be hard to sell probably |
| 08:47.31 | ZonE-HaKin9| | maybe able to sell it at work they love the 5500 that we showed them... so the 5600 woulddn't be a hard sell to ppl who don't dev just want a cool pda running linux |
| 08:48.15 | XorA | ZonE-HaKin9|: :-) |
| 08:49.12 | ZonE-HaKin9| | well it looks like i will be dev'ing for the 5500 again won't waste my time with 5600 atm... |
| 08:50.00 | ZonE-HaKin9| | been dev'ing direct;y on my 5500 for months so oe & bitbake on a pII500 w/128 will hammer compaired to the 5500 206 w/64 hehe...lol |
| 08:50.06 | hrw|work | someone know why "monotone pull" does not want to fetch new revs? I have to use "monotone pull SERVER BRANCH" to get revs.. |
| 08:55.14 | *** join/#oe TomPower (i=thomas@140.78.95.57) |
| 09:11.36 | *** join/#oe Titeuf (n=Titeuf@2m01.net) |
| 09:11.43 | *** join/#oe dyoung (n=dyoung@nslu2-linux/dyoung) |
| 09:16.37 | RP | hrw|work: Maybe the default server you have specificed isn't correct? |
| 09:16.44 | RP | I'm not sure how to change it though... |
| 09:17.29 | hrw|work | RP: default is 'vanille.de' here |
| 09:29.46 | *** join/#oe JuergenE (n=Juergen@140.78.95.63) |
| 09:30.43 | hrw|work | RP: sqlite3 DATABASE; delete from db_vars; - it remove all known_servers and few other things |
| 09:49.04 | *** join/#oe zinga (n=arnaudb@186.80-203-227.nextgentel.com) |
| 09:52.11 | RP | XorA: hostap patch is in. Untested other than compiles ;-) |
| 09:52.56 | *** join/#oe pb_ (n=pb@2002:5246:d929:1:20a:5eff:fe00:391e) |
| 09:56.52 | XorA | RP: cheers, Ill see if I can give that a go today then |
| 09:58.55 | CIA-4 | 03hrw 07org.oe.dev * re8bfb35a... 10/packages/opie-i18n/ (opie-i18n.inc opie-i18n_1.2.0.bb opie-i18n_cvs.bb): opie-i18n: package opie-dict-en also |
| 09:58.59 | CIA-4 | 03xora 07org.oe.dev * r28199200... 10/packages/gnome/libgnomeprint_2.8.2.bb: libgnomeprint: added EXTRA_OECONF = "--with-cups=no" to prevent pulling in of hosts cups stuff. |
| 09:59.03 | CIA-4 | 03rpurdie 07org.oe.dev * r4ee9f0fd... 10/packages/hostap/ (2 files in 2 dirs): hostap: Add cardid table so it works with recent kernels |
| 10:07.20 | *** join/#oe dyoung (n=dyoung@nslu2-linux/dyoung) |
| 10:08.54 | *** join/#oe koen (n=koen@cl-148.ams-05.nl.sixxs.net) |
| 10:13.02 | *** join/#oe nslu2-log (n=nslu2-lo@nslu2-linux/dyoung) |
| 10:16.30 | hrw|work | RP: that cardid table can be expanded a bit more? |
| 10:17.22 | hrw|work | RP: /etc/pcmcia/hostap_cs.conf have more cards iirc |
| 10:21.23 | XorA | hrw|work: its only actually essential for Connect+ |
| 10:22.12 | hrw|work | XorA: not if I have pcmciautils instead of pcmcia-cs |
| 10:23.47 | hrw|work | with pcmcia-cs it is really nearly not needed as cardmgr force loading of modules. but with pcmciautils all work has to be done by hotplug which try to modprobe with "modalias" which is created from ID table in module so normal modutils is needed |
| 10:36.07 | mickeyl | morning folks |
| 10:36.23 | Twiun | mickeyl: I'm seeing you online during the day more and more... how's the phd going? :) |
| 10:38.08 | hrw|work | hi mickeyl |
| 10:39.35 | *** join/#oe mithro (n=tim@c213-100-42-188.swipnet.se) |
| 10:39.35 | mickeyl | bzzzt. wrong subject. choose another one |
| 10:39.55 | Twiun | how's, err, monotone? |
| 10:40.08 | mickeyl | :D |
| 10:41.27 | hrw|work | mickeyl: I joined few lines in OOO |
| 10:41.34 | mickeyl | hrw|work: thanks |
| 10:41.54 | hrw|work | mickeyl: basically you dont have to use <p> - wordpress add them |
| 10:42.26 | mickeyl | I see. Now that I know how I can add things to not-in-menu I'll do the drafts completely in wordpress. it's too annoying to convert it later |
| 10:45.39 | hrw|work | ;) |
| 10:46.21 | *** join/#oe oris_wolfbane (n=oris_wol@82-38-121-195.cable.ubr01.hali.blueyonder.co.uk) |
| 10:46.22 | hrw|work | mickeyl: there are plugins for wordpress which make it easier but it will require converting of all content so I dont enable them |
| 10:48.52 | mickeyl | sure |
| 10:50.15 | mickeyl | RP: I'm doing a 3100 image atm. Will give you the location when it's done |
| 11:03.49 | RP | morning mickeyl |
| 11:04.13 | RP | mickeyl: I'll pass the location on. I told him to post in oz-dev but he doesn't seem to have done so yet |
| 11:04.33 | RP | hrw: Yes, you can add deviceids at will. If you let me know of any extras, I'll push them into mainline... |
| 11:04.56 | RP | Should that bluetooth id be pushed btw or is someone doing that? |
| 11:05.11 | mickeyl | RP: it'll be @ http://www.Vanille.de/temp/borzoi in a couple of hours |
| 11:05.18 | mickeyl | RP: which bt id? |
| 11:06.13 | RP | the one which gets added to dtl1_cs |
| 11:06.18 | mickeyl | ah |
| 11:06.39 | mickeyl | btw., i got a id tuple from a usb host card which is apparantly not in yet |
| 11:06.55 | mickeyl | oh and we had much fun with a SanDisk 2G sd card |
| 11:06.57 | RP | I don't even know who added that... |
| 11:07.12 | mickeyl | it doesn't work in _any_ Linux device, not even the 2.6.13 zaurus |
| 11:07.13 | RP | "much fun"? |
| 11:07.27 | RP | hmm... |
| 11:07.38 | RP | Its probably too slow at some critical moment... |
| 11:07.47 | RP | Try increasing the value in the mmc_timeout patch |
| 11:07.59 | *** join/#oe yOyOeK (n=yoyo@proxy.ghost.pl) |
| 11:08.09 | yOyOeK | hi all |
| 11:08.26 | RP | Gather any cardids toegther and I'll try and get them in mainline. I don't want any patches we can't help... |
| 11:08.53 | mickeyl | yep |
| 11:09.30 | *** join/#oe Jenna (n=cherryRe@209.8.233.242) |
| 11:09.39 | mickeyl | i think there's a Sandisk ID missing in hostap |
| 11:09.43 | mickeyl | i'll check when I'm home |
| 11:09.57 | hrw|work | RP: that patch was sent to upstream |
| 11:09.57 | mickeyl | it's a rare OEM card which has a Connect+ chipset, however 0 MB memory. |
| 11:10.05 | *** part/#oe oris_wolfbane (n=oris_wol@82-38-121-195.cable.ubr01.hali.blueyonder.co.uk) |
| 11:10.20 | *** part/#oe Jenna (n=cherryRe@209.8.233.242) |
| 11:10.38 | RP | hrw|work: Ok, that's fine then. It should therefore be at the top of the file ;-) |
| 11:10.53 | hrw|work | RP: dtl1_cs-add-socket-revE.patch is my patch |
| 11:10.55 | hrw|work | RP: ok |
| 11:10.57 | RP | or towards the top... |
| 11:13.54 | *** join/#oe BigAl (n=bigal@dsl-202-45-98-37.ACT.netspace.net.au) |
| 11:14.02 | mickeyl | hi BigAl |
| 11:14.04 | mickeyl | sup |
| 11:14.11 | RP | hi BigAl |
| 11:14.44 | hrw|work | there are some pending patches from Dominic that I want to see merged |
| 11:14.44 | hrw|work | mainline first, before I am going to submit patches for the Bluetooth |
| 11:14.45 | hrw|work | PCMCIA drivers. |
| 11:14.53 | hrw|work | thats answer from module author |
| 11:15.58 | hrw|work | hi BigAl |
| 11:17.36 | *** join/#oe reenoo_ (n=r@p5489CE0A.dip.t-dialin.net) |
| 11:17.52 | mickeyl | RP: fwiw, I still have that odd idea that 2.6 doesn't shut down all devices and drains more power in standbye than 2.4. Do you have a means to measure that? |
| 11:17.58 | BigAl | Hi hrw |
| 11:18.13 | BigAl | Hi RP, mickeyl |
| 11:21.07 | RP | hrw|work: Ok, I'm happy just to know its all being dealt with :) |
| 11:21.41 | RP | mickeyl: Its entirely possible. Try the latest battery patches and see if they help as I did make a lot of changes (for the better) |
| 11:21.56 | RP | I should perhaps see if I can measure it somehow... |
| 11:22.03 | mickeyl | ok will do. will have to upgrade my c7x0 anyway to look at the new hinge support |
| 11:22.24 | hrw|work | RP: added info on top of patch |
| 11:22.40 | mickeyl | the c7x0 runs without a battery once it booted. so if you have measuring equipment for AC you could compare it like that |
| 11:22.47 | RP | mickeyl: It could have been that the battery just doesn't charge as much under 2.6... |
| 11:23.10 | reenoo_ | morning |
| 11:23.26 | RP | mickeyl: The last patches should be a bit more active about battery charging... |
| 11:23.36 | mickeyl | RP: ok, I'll try that |
| 11:24.01 | RP | Thinking about it, I'd better remove the debug code in the battery code... |
| 11:24.04 | RP | hrw|work: thanks |
| 11:25.01 | RP | I've updated my status page to reflect the C3000 kernel status :) |
| 11:25.46 | mickeyl | cool |
| 11:26.32 | CIA-4 | 03mickeyl 07org.oe.dev * r4f3c6ab6... 10/packages/sharp-binary-only/sharp-sdmmc-support_2.4.18-rmk7-pxa3-embedix.bb: add borzoi variant of sharp-sdmmc driver |
| 11:26.36 | CIA-4 | 03hrw 07org.oe.dev * rb7f12e46... 10/packages/linux/linux-openzaurus-2.6.13-rc5-mm1/dtl1_cs-add-socket-revE.patch: linux-oz: added info from upstream about future of dtl1_cs-add-socket-revE.patch |
| 11:30.23 | __law__ | here is a new compile error if i try to build an gpe-image http://pastebin.com/344902 |
| 11:30.35 | __law__ | should i try to build xtst ? |
| 11:31.51 | XorA | __law__: ah, I suspected, xdpyinfo should DEPEND on xtst |
| 11:33.36 | XorA | __law__: thats pb_'s package |
| 11:34.21 | __law__ | pb_, could you change this? |
| 11:35.04 | __law__ | after installing xtst manually all works fine |
| 11:45.14 | *** join/#oe mrz80 (i=1000@caledonia.cns.ufl.edu) |
| 11:47.22 | *** join/#oe stevenh (n=shelder@65.167.23.2) |
| 11:47.58 | CIA-4 | 03florian 07org.oe.dev * r7a93d384... 10/conf/ (distro/maemo-preferred.inc machine/netvista.conf): |
| 11:47.58 | CIA-4 | Update netvista cinguration. |
| 11:47.58 | CIA-4 | Fix several version numbers for the maemo images. |
| 11:48.02 | CIA-4 | 03florian 07org.oe.dev * rc5331de7... 10/packages/maemo/osso-gnome-vfs2_2.8.4.4-1.bb: Update dependencies to a fixed version of dbus. Change PROVIDES to virtual/gnome-vfs. |
| 11:48.06 | CIA-4 | 03florian 07org.oe.dev * r52fd1ab0... 10/packages/xdpyinfo/xdpyinfo_cvs.bb: Add missing dependency to xtst. |
| 11:48.10 | CIA-4 | 03florian 07org.oe.dev * r603d3c23... 10/packages/gpe-bluetooth/gpe-bluetooth_0.42.bb: Introduce a new version of gpe-bluetooth. |
| 11:48.15 | CIA-4 | 03florian 07org.oe.dev * r771edb7e... 10/packages/gpe-conf/gpe-conf_0.1.25.bb: Add new version of gpe-conf. |
| 11:50.23 | BigAl | What's a good media player for Opie? |
| 11:52.58 | *** join/#oe patw (i=pat@amd.co.at) |
| 11:53.08 | patw | Hello |
| 11:53.53 | patw | could anybody tell me what LEAD_SONAME is for? |
| 11:53.57 | __law__ | mickey|lunch, i cant update my monotone repo any ideas? http://pastebin.com/344916 |
| 11:55.23 | koen | patw: it's needed to name the package according to debian package naming rules |
| 11:56.46 | patw | aaah, ok, thank you. |
| 12:00.12 | hrw|work | BigAl: hard to tell - opie-mediaplayer2 should work for most |
| 12:02.14 | BigAl | hrw|work: I could never get that to work, it'd always lock up in the "scanning for files" stage. |
| 12:02.24 | CIA-4 | 03koen 07org.oe.dev * rce4141d6... 10/conf/distro/preferred-gpe-versions-2.7.inc: GPE 2.7: use gpe-conf 0.1.25 |
| 12:04.15 | *** join/#oe malfi (n=malte@dsl-084-059-061-185.arcor-ip.net) |
| 12:05.21 | hrw|work | BigAl: works for me |
| 12:06.51 | hrw|work | X-Scale 1.25GHz... intel is weird |
| 12:09.21 | BigAl | hrw|work: I'm rebuilding the image now, hopefully it'll work. |
| 12:13.51 | *** join/#oe chris144 (n=kvirc@195.234.128.72) |
| 12:15.35 | RP | BigAl: Did you ever try gpe on spitz-2.6? |
| 12:16.09 | *** join/#oe _chronic (n=adamb@213.210.24.6) |
| 12:18.43 | BigAl | RP: I've tried to build it, but the built kept failing. |
| 12:19.02 | pb_ | _law_: I lack the privs to change it. If you can do so, please go ahead; otherwise, please file a request in bugzilla. |
| 12:20.48 | RP | BigAl: It appears to set pxafb into a very strange state when the xserver starts :-/ |
| 12:21.37 | BigAl | RP: Weird. With 2.4 it'd build and run to the point where I could set a username and password, but that's it. |
| 12:21.54 | BigAl | RP: If I can get an image to build properly I'll have a poke at it |
| 12:26.52 | CIA-4 | 03florian 07org.oe.dev * r791935fd... 10/packages/maemo/osso-gnome-vfs2_2.8.4.4-1.bb: Fix typo. |
| 12:29.10 | *** join/#oe Virusmaster (n=Thomas@p549E9D86.dip0.t-ipconnect.de) |
| 12:37.22 | *** join/#oe [g2] (n=g2@nslu2-linux/g2) |
| 12:45.02 | *** join/#oe cedric (n=cedric@LAubervilliers-151-11-32-8.w193-251.abo.wanadoo.fr) |
| 12:59.20 | *** join/#oe marcan (n=marcanso@160.10.7.144) |
| 13:04.58 | *** join/#oe Timelord (n=TL@216.137.177.104) |
| 13:06.40 | *** join/#oe Timelord (n=TL@216.137.177.104) |
| 13:06.57 | RP | BigAl: Under 2.6 it works if you disable the command line options in Xserver.... |
| 13:07.04 | RP | (unrotated) |
| 13:08.58 | BigAl | RP: Can the Xserver do rotation itself? |
| 13:12.56 | RP | BigAl: yes, although the rotation applet doesn't appear to be installed |
| 13:13.27 | RP | Is there a commandline to tell gpe to rotate? |
| 13:13.49 | koen | xrandr -o {left,right,normal,inverted} |
| 13:14.01 | koen | which is the regular tool from X |
| 13:14.06 | RP | koen: That had no effect on it... |
| 13:14.07 | koen | (just like on your desktop) |
| 13:16.39 | RP | koen: It will change the login screen. It has no effect after you've logged in - must get changed back by gpe-dm? |
| 13:16.58 | XorA | RP: those hostap modules dont work :-( |
| 13:16.59 | koen | iirc it spawns a new xserver after login |
| 13:17.55 | RP | XorA: And the ones in kernel do? Strange... |
| 13:18.11 | RP | XorA: Did you check the card id was correct? |
| 13:18.12 | XorA | RP: Its oopsed my kernel, trying to extract now |
| 13:18.30 | RP | XorA: Ah. Not good :-/ |
| 13:18.32 | XorA | RP: it recognises card, but firmware wont load then it oopsed |
| 13:19.08 | RP | Maybe try disabling the ID in the ide module - perhaps its a resource conflict? |
| 13:20.02 | XorA | RP: http://pastebin.ca/20976 |
| 13:21.30 | RP | XorA: Its not a "proper" oops - its a soft lockup |
| 13:21.43 | XorA | RP: its taking 100% CPU load :-( |
| 13:22.05 | RP | XorA: Its in the IDE layer - its probably requesting ide resources which are in conflict with hostap |
| 13:22.22 | *** join/#oe __law__ (n=law@mail.stiftadmont.at) |
| 13:23.08 | XorA | RP: battery charging LED no longer works either |
| 13:23.15 | *** join/#oe ChanServ (ChanServ@services.) |
| 13:23.15 | *** mode/#oe [+o ChanServ] by irc.freenode.net |
| 13:23.29 | RP | XorA: It wouldn't as the charger code needs cpu time to function |
| 13:23.40 | RP | XorA: Disable the IDE driver od for that card for now and try that... |
| 13:23.51 | XorA | RP: no, ive rebooted, and no LED |
| 13:24.39 | XorA | RP: battery applet shows AC though |
| 13:24.55 | *** join/#oe obi (n=obi@asus.saftware.de) |
| 13:26.20 | XorA | RP: odd, rebooted, card is now functioning in both IDE and wlan mode simultaneously |
| 13:28.22 | hrw|work | XorA: but it fails when not present at boot time? |
| 13:28.34 | XorA | hrw|work: yeah |
| 13:28.52 | XorA | ah, broken it again, it doesnt last long in when both are running :-) |
| 13:29.15 | XorA | wireles is now running, ide is locked up |
| 13:31.04 | XorA | RP: my Z no longer charges from USB on latest kernel |
| 13:32.26 | *** join/#oe lardman|work (n=lardman@138.38.73.178) |
| 13:34.32 | RP | XorA: Sounds like some races are present. Still, its a start :) |
| 13:34.38 | RP | The charging stuff has me concerned... |
| 13:34.48 | RP | USB doesn't change the reported AC status? |
| 13:35.34 | RP | Can you have a look over the logs for an AC insertion to USB and see if it notices anything at all? |
| 13:37.19 | XorA | RP: ahah, it seems it doesnt like it when USB is inserted on boot, just unplugged, re-insterted and its lit LED |
| 13:37.25 | hrw|work | RP: http://pastebin.ca/20978 - my c760 with 2.6.13-rc6-mm2 after remove/connect usb charger |
| 13:37.29 | *** join/#oe CosmicPenguin (n=nobody@aus-ext-proxy02.amd.com) |
| 13:37.32 | XorA | RP: and voltage is now going up not down |
| 13:38.34 | RP | XorA: Ok, that's much easier to fix :) |
| 13:38.43 | RP | hrw|work: Thanks, it looks fine :) |
| 13:38.43 | hrw|work | I will reboot with usb charger connected |
| 13:39.14 | RP | hrw|work: Ok, it should do an AC check as it boots - if it doesn't I know what to fix... |
| 13:39.30 | hrw|work | Z started with power led off |
| 13:39.38 | RP | We used to have a whole load of these bugs and I thought I'd tidied it all up! |
| 13:41.06 | hrw|work | ;) |
| 13:42.38 | XorA | RP: with reference to your previous comment to mickey|lunch my "fully" charged c7x0 under older kernel now registers as only 70% under new |
| 13:42.42 | hrw|work | my Z is fully charged so charge led was off |
| 13:43.13 | RP | XorA: I've tweaked the charging profile quite a bit. Is it charging? |
| 13:43.31 | XorA | RP: its gone from 70->75 |
| 13:43.47 | RP | and the charger is still on? |
| 13:43.54 | XorA | RP: yes |
| 13:44.07 | RP | XorA: Interesting :) |
| 13:44.12 | hrw|work | RP: http://pastebin.ca/20979 - kind of dmesg from charged with charger connected on boot |
| 13:44.12 | XorA | now hovering 75-78-75-78 |
| 13:45.07 | RP | hrw|work: You' |
| 13:45.15 | RP | hrw|work: Your battery is fully charged? |
| 13:45.41 | hrw|work | RP: yep |
| 13:45.45 | RP | hrw|work: That log suggests it is - it tried to turn the charger on and found it was full... |
| 13:45.52 | hrw|work | Battery Voltage: 217 |
| 13:45.52 | hrw|work | <PROTECTED> |
| 13:45.52 | hrw|work | <PROTECTED> |
| 13:46.15 | hrw|work | voltage at 100% varies from 216 to 222 on my machine iirc |
| 13:47.04 | RP | That sounds normal. I think XorA's machine just got confused as it all appears to be doing what it should... |
| 13:48.42 | XorA | wierd while my machine was "confused" it showed a battery percentage while on AC in GPE applet, not it is charging it shows 100% |
| 13:49.40 | RP | XorA: That sounds like someone got the logic inversed in the battery driver apm code ;-) |
| 13:51.08 | hrw|work | I like to see infos like 'on AC, charging, battery is 70% charged now' |
| 13:51.37 | RP | hrw|work: We can do that but not through apm without breaking the specification |
| 13:51.49 | XorA | just rebooted again with usb connected, and it starts with LED on, then turns it off |
| 13:51.56 | *** join/#oe sirfred (n=mteira@92.Red-81-44-140.pooles.rima-tde.net) |
| 13:52.01 | RP | I don't want to use apm for the battery info... |
| 13:52.05 | sirfred | Hello. |
| 13:52.09 | RP | XorA: Watch for it flicking on then off again |
| 13:52.15 | RP | hi sirfred |
| 13:52.23 | sirfred | Hi, RP |
| 13:52.38 | XorA | seems to be pretty soliddly off |
| 13:53.32 | *** join/#oe Timelord (n=TL@216.137.177.104) |
| 13:53.46 | hrw|work | RP: iirc we have all needed info now.. /sys/devices/platform/corgi-battery/battery_percentage give one info |
| 13:54.17 | RP | XorA: We'll have to see what dmesg says then |
| 13:55.45 | hrw|work | RP: does /sys/devices/platform/corgi-battery/power/state have to give info about charging/not_charging? |
| 13:55.55 | XorA | RP: the initial boot info is lost by the time I get far enough to get mdesg :-( |
| 13:56.32 | RP | hrw|work: No, that state file is something different. Adding extra information is easy though |
| 13:56.34 | *** join/#oe blaster8 (n=jonesml@user-122-216-151-83.e7even.com) |
| 13:58.15 | XorA | http://pastebin.ca/20980 |
| 14:01.26 | RP | XorA: As you say, too late in the bootup :-( |
| 14:07.37 | *** join/#oe reenoo_afk (n=r@p5489C06D.dip.t-dialin.net) |
| 14:09.11 | __law__ | has anyone else mt pull problems? |
| 14:09.21 | CosmicPenguin | always |
| 14:10.08 | mickeyl | __law__: are you on oe@handhelds.org ? |
| 14:10.21 | mickeyl | if not, might subscribe to it |
| 14:10.42 | __law__ | mickeyl, no why |
| 14:11.07 | sirfred | mickeyl: Hi. |
| 14:11.17 | XorA | __law__: essential oe info |
| 14:11.49 | kergoth_ | morning |
| 14:12.01 | mickeyl | everyone with OE core access should be on the mailing list or at least regularly read the archives |
| 14:12.54 | mickeyl | morning kergoth |
| 14:13.06 | koen | hey kergoth_ |
| 14:14.12 | RP | morning kergoth |
| 14:17.50 | oho | mickeyl: Hi, could you please tell me if there is an easy way to install all essential python packages at once. Thanks |
| 14:18.15 | mickeyl | who defines what |
| 14:18.18 | mickeyl | s essential? |
| 14:19.21 | kergoth_ | mickeyl: we just need an app to autogenerate python dependencies. run it against the script the user is trying to run and have it emit a list of the packages tehy should install |
| 14:19.23 | *** join/#oe qfh (n=qfh@ppp-82-135-6-26.mnet-online.de) |
| 14:19.26 | kergoth_ | heh |
| 14:19.29 | RP | mickeyl: Yes, I also found the newsletter extremely helpful - I'd missed a couple of developments :) |
| 14:19.48 | oho | that sounds like what I am after ;-) |
| 14:20.02 | mickeyl | RP :) |
| 14:20.14 | mickeyl | kergoth: it's nearly impossible to do that |
| 14:20.31 | hrw|work | I sent into to one of Polish news services about newsletter |
| 14:20.40 | mickeyl | you can statically look at import statements, but you won't grab all dependencies that way |
| 14:21.07 | oho | mickeyl: then I will write a script which intall's most of them |
| 14:21.46 | kergoth_ | worst case you could swipe the parser from the python interpreter's codebase or something. |
| 14:21.46 | kergoth_ | heh |
| 14:22.29 | mickeyl | it's not a parser thing |
| 14:22.42 | mickeyl | you can do fancy things @ runtime |
| 14:22.51 | mickeyl | foo = "mymodule" |
| 14:22.54 | mickeyl | __import__( foo ) |
| 14:23.53 | kergoth_ | mickeyl: the python interpreter knows what really needs to be imported given what the user is doing. worst case we'd hack up an interpreter to remove the unnecessary bits |
| 14:24.02 | kergoth_ | heh |
| 14:27.57 | XorA | RP: ah, even though charge LED is off it seems unit is charging |
| 14:30.00 | *** join/#oe Timelord0 (n=TL@216.137.177.104) |
| 14:31.29 | RP | XorA: So its just the LED not reflecting the state. Interesting... |
| 14:36.11 | *** join/#oe jipi (n=jipi@cm240.gamma177.maxonline.com.sg) |
| 14:41.58 | koen | RP: you have a .bb for that? |
| 14:42.37 | RP | koen: .bbs, yes |
| 14:42.48 | RP | I've not ported all the patches yet though |
| 14:43.03 | RP | I'm not ported any of the patches really, just built without them... |
| 14:44.10 | RP | koen: I was wondering whether to check them in with DEFAULT_PREFERENCE=-1 ? |
| 14:44.19 | *** join/#oe malfimalfi (n=malte@dsl-084-059-036-104.arcor-ip.net) |
| 14:44.26 | koen | RP: no need for that |
| 14:44.48 | koen | preferred-versions-gpe-2.7.inc selects the right GTK and glib |
| 14:45.32 | RP | koen: Are you sure? I didn't have to alter that to build with the newer versions... |
| 14:46.02 | koen | preferred-gpe-versions-2.7.inc:PREFERRED_VERSION_gtk+ ?= "2.6.7" |
| 14:46.04 | RP | I am using an older oe tree so if that was a recent change, that would explain the difference... |
| 14:48.09 | *** join/#oe lamikr (n=chatzill@aragorn.kortex.jyu.fi) |
| 14:49.25 | RP | koen: I'm using an older oe and DISTRO=oz which includes preferred-gpe-versions.inc which doesn't set a version for gtk+ |
| 14:50.43 | koen | that's expected behaviour |
| 14:50.56 | koen | we only care about versioned distro's |
| 14:52.18 | lamikr | Hi koen! |
| 14:52.44 | koen | RP: 2.8 is ABI and API compatible with 2.6, so no need for DEFAULT_PREFERENCE |
| 14:52.45 | koen | hey lamikr |
| 14:53.25 | RP | koen: ok. I'll list the other things I had to upgrade in a minute and if its ok, I'll push |
| 14:53.31 | lamikr | We have finally submitted h6300 specific patches to bugzilla. I have tested them working on yesterday nights familiar-0.8.3 |
| 14:53.44 | lamikr | http://bugs.openembedded.org/show_bug.cgi?id=255 and http://bugs.openembedded.org/show_bug.cgi?id=256 |
| 14:55.41 | *** join/#oe france_ (n=france@zap.crl.dec.com) |
| 14:58.10 | RP | After updating its just pango and glib missing so I should be ok to push? |
| 14:58.15 | CoreDump|home | hi |
| 14:58.28 | koen | RP: glib is in already |
| 14:58.31 | koen | pango too |
| 14:58.46 | koen | and atk |
| 14:58.52 | koen | and cairo |
| 14:59.10 | hrw|work | hi CoreDump |
| 14:59.26 | RP | I went to glib 2.8.1 ;-) |
| 14:59.34 | koen | aha |
| 14:59.47 | koen | I go away for a week and they release new stuff ;) |
| 15:00.05 | RP | and pango_10.1 ;-) |
| 15:00.18 | RP | I'll tidy it up and push |
| 15:08.36 | *** join/#oe Timelord (n=TL@216.137.177.104) |
| 15:09.25 | CIA-4 | 03koen 07org.oe.dev * rf83ca42f... 10/packages/gpe-mini-browser/gpe-mini-browser_cvs.bb: Add sqlite to gpe-mini-browser depends |
| 15:10.06 | lamikr | RP: Am I able to build gpe-image with those ńew libs if I just change the DISTRO to pure familiar insteat of using familiar-0.8.3 |
| 15:12.05 | RP | lamikr: Yes. They're not in yet though... |
| 15:12.50 | hrw|work | koen: gpe-mini-browser and gpe-pim use sqlite2 still? |
| 15:13.44 | koen | hrw|work: yes |
| 15:19.15 | hrw|work | koen: any plans to move to sqlite3? |
| 15:20.02 | koen | hrw|work: plans yes, just no developer time available |
| 15:20.55 | emte | could use edb :P |
| 15:21.04 | koen | no |
| 15:21.12 | koen | that's berkely db |
| 15:21.12 | emte | since e depends on gpe anyway now |
| 15:21.17 | emte | yeah i know |
| 15:21.41 | hrw|work | koen: ok |
| 15:22.03 | emte | curiousl why you would use sqlite for a browser tho |
| 15:22.12 | emte | seems a bit overkill |
| 15:29.07 | mickeyl | CoreDump|home: http://www.vanille.de/temp/efl-altboot.png |
| 15:29.22 | mickeyl | CoreDump|home: just a mockup :) |
| 15:29.26 | kergoth_ | ooh. |
| 15:29.32 | CoreDump|home | cool :D |
| 15:29.40 | hrw|work | nice |
| 15:29.47 | koen | mickeyl: sweetness!!!! |
| 15:29.48 | *** join/#oe ar_ (n=ar@213.211.242.221) |
| 15:29.51 | mickeyl | hehe |
| 15:29.53 | mickeyl | fluff |
| 15:29.58 | mickeyl | unnecessary eye candy |
| 15:30.22 | koen | I think trolltech just hired a hitman |
| 15:30.39 | CoreDump|home | :) |
| 15:34.02 | koen | 239x321, funky |
| 15:34.04 | hrw|work | altboot using gtk/x11 will be next step |
| 15:34.30 | mickeyl | nah, this will remain fb-only |
| 15:34.35 | koen | evasfb would be more appropriate |
| 15:34.43 | mickeyl | my goal is to make it fit into the spitz flash |
| 15:34.51 | mickeyl | which means 6MB is the limit |
| 15:34.53 | mickeyl | or was it 5? |
| 15:35.27 | hrw|work | spitz/2.6 should be able to boot stright from /dev/hda1 |
| 15:36.32 | mickeyl | hrw|work: sure, but consider altboot being more than just a bootmanager, i.e. also backup functionality via network and stuff. It makes sense to have nothing running from hd in that case |
| 15:36.43 | hrw|work | yep |
| 15:36.57 | *** join/#oe Virusmaster (n=Thomas@p549CD7A1.dip.t-dialin.net) |
| 15:37.49 | mickeyl | next thing I'll do will be to add tslib support to ecore-fb |
| 15:37.56 | mickeyl | atm. it's hardcoded to some h3600 thingy |
| 15:37.59 | mickeyl | :D |
| 15:38.05 | RP | monotone doesn' |
| 15:38.08 | koen | heh |
| 15:38.15 | RP | monotone doesn't have a copy command does it? |
| 15:38.23 | mickeyl | RP: not yet |
| 15:38.55 | RP | so we just copy files and lose history? |
| 15:39.08 | mickeyl | when you copy yes |
| 15:39.13 | mickeyl | you can move instead |
| 15:39.26 | mickeyl | i think this is on the TODO list |
| 15:39.45 | RP | np, just checking :) |
| 15:40.22 | *** join/#oe Timelord0 (n=TL@216.137.177.104) |
| 15:41.28 | kergoth_ | mickeyl: nice work on the latest newsletter, finally read it. good stuff. |
| 15:42.13 | mickeyl | thanks |
| 15:42.34 | koen | mickeyl: iirc reenoo asked for a 'copy' command and they weren't interested |
| 15:43.18 | mickeyl | koen: too bad, that's handy for projects like ours. guess that most people just rename and are not interested in having multiple files with the same history |
| 15:43.35 | hrw|work | RP: I added few cards from hostap_cs.conf to hostap cardid table: http://pastebin.ca/20988 |
| 15:44.05 | kergoth_ | i'm going to look at getting tailor to support a monotone source, which will make it easy to test out other source control tools without losing history, or maintain gateways to other tools |
| 15:44.11 | kergoth_ | i think we should seriously consider svk, myself. |
| 15:44.21 | koen | mickeyl: how about having a netstumbler (http://www.netstumbler.com/) style 'o' in the A for angstrom? |
| 15:44.34 | RP | hrw|work: fine. feel freel to update the diff |
| 15:44.36 | hrw|work | hostap 0.4.4 have support for pcmcia changes in 2.6.13 |
| 15:44.43 | hrw|work | 2005-08-21 - v0.4.4 |
| 15:44.43 | hrw|work | * added support for pcmcia changes in Linux 2.6.13 |
| 15:44.44 | hrw|work | * added support for creating sysfs device files (Linux 2.6.x) |
| 15:45.24 | CIA-4 | 03rpurdie 07org.oe.dev * r8981688a... 10/packages/glib-2.0/ (glib-2.0_2.8.0.bb glib-2.0_2.8.1.bb): glib-2.0: upgrade to 2.8.1 |
| 15:45.25 | RP | Time to upgrade I suspect :) |
| 15:45.27 | CIA-4 | 03rpurdie 07org.oe.dev * r0ad28d6b... 10/packages/pango/pango_1.10.0.bb: pango: add version 1.10.0 |
| 15:45.32 | CIA-4 | 03rpurdie 07org.oe.dev * rab3bfea8... 10/packages/gtk+/ (14 files in 2 dirs): Add gtk+ 2.8.0 |
| 15:46.27 | *** join/#oe dopez (n=unknown@unaffiliated/dopez) |
| 15:47.18 | emte | hmm |
| 15:47.52 | hrw|work | RP: add_event.patch looks like applied, hostap_cardids.patch also |
| 15:47.52 | emte | kergoth, you read my paste lastnight? |
| 15:48.01 | kergoth_ | dont think so, what was it? |
| 15:48.04 | emte | hey good news for monotone: njs emte: and we have a Plan For Fixing That, hopefully will be working in a ~few months |
| 15:48.09 | emte | re: speed and computational req |
| 15:48.15 | kergoth_ | ah |
| 15:48.17 | mickeyl | koen: you mean the antenna symbol? |
| 15:48.18 | kergoth_ | cool |
| 15:49.13 | emte | njs and mpm were discussing monotone, i belive mpm was getting info for his presentation at linux.conf.au |
| 15:49.17 | kergoth_ | hmm, i should run up to the nearby grocery store and get some soda to bring to work |
| 15:49.20 | kergoth_ | emte: ah |
| 15:49.54 | emte | lot of discussion about monotone vs bk design history |
| 15:49.59 | kergoth_ | whats the irc channel for hg? |
| 15:50.07 | emte | #mercurial |
| 15:50.46 | emte | very active group |
| 15:50.57 | RP | hrw|work: That would be what they needed to add to have it work with 2.6.13 |
| 15:52.01 | hrw|work | looks like our hostap_cs.conf need cleaning and comparing with upstream one |
| 15:52.59 | emte | and if your curious it looks liek the newest project is the hgeditor |
| 15:53.45 | emte | simular to how bk worked i think ... |
| 15:54.34 | emte | okay back to biohazard .... time for all the mouse/touch callbacks |
| 15:54.53 | emte | er, fig segfault first |
| 15:54.55 | *** join/#oe eumel (n=chatzill@p5483236B.dip0.t-ipconnect.de) |
| 15:54.56 | emte | fix* |
| 15:56.00 | koen | mickeyl: yes, the antenna symbol |
| 15:57.57 | lardman|work | Afternoon all; I've just done a bitbake gpe-image for which I pulled last night; I have a strange error in log.do_rootfs: http://pastebin.ca/20989 |
| 15:58.04 | lardman|work | Basically the error for unsatisfied deps for task-bootstrap, those modules exist as ipks, I don't know why they're not picked up |
| 15:59.43 | gerwinin | Lardman I have the same error |
| 16:00.01 | lardman|work | would the naming make any difference to whether they are picked up? Mine seem to have a 2.6 prefix before the kernel version: http://pastebin.ca/20990 |
| 16:00.37 | gerwinin | With me task bootstrap generates an error but it is not saying what it is missing |
| 16:00.56 | lardman|work | gerwinin: even in the log file |
| 16:00.57 | lardman|work | ? |
| 16:01.26 | gerwinin | Yes in the log file it is not saying anything about this |
| 16:01.36 | gerwinin | It is saying unsatisfied depency |
| 16:02.25 | koen | RP: gtk 2.8.0 is so last week ;) |
| 16:02.33 | reenoo_ | lardman|work: http://bugs.openembedded.org/show_bug.cgi?id=51 |
| 16:02.52 | CIA-4 | 03rpurdie 07org.oe.dev * r306834bf... 10/packages/gtk+/gtk+_2.8.0.bb: gtk-2.8.0: syntax correction |
| 16:03.00 | hrw|work | RP: with 2.6.13-rc6-mm2 hostap-modules 0.4.4 compiles without utsname.patch |
| 16:03.12 | reenoo_ | gerwinin: are you sure the log file (not the console output) doesn't contain any detailed info? |
| 16:04.21 | lardman|work | reenoo_: Thanks, I'll work through |
| 16:04.47 | gerwinin | renoo_ I amm looking at log.do_rootfsdoesn't say anything interesting |
| 16:05.22 | lardman|work | gerwinin: look about half way through, that's where my pastebin.ca post came from |
| 16:06.34 | RP | hrw|work: That's good to know |
| 16:09.11 | gerwinin | Okay |
| 16:12.11 | hrw|work | mickeyl: can you look at http://pastebin.ca/20993 - its hostap_cs.conf a bit changed to be more up-to-date with upstream one |
| 16:12.48 | *** join/#oe minipanda (n=zhanght@219.236.21.70) |
| 16:13.22 | *** part/#oe minipanda (n=zhanght@219.236.21.70) |
| 16:13.27 | hrw|work | NOTE: package hostap-modules-0.4.4-r0: task do_build: completed |
| 16:14.44 | hrw|work | someone familiar with hostap should post our changes to hostap_cs.conf for upstream |
| 16:16.31 | mickeyl | hrw|work: why do you do that? |
| 16:16.45 | mickeyl | don't forget that our hostap_cs.conf is _appended_ to the upstream one, not replacing it |
| 16:16.47 | mickeyl | :D |
| 16:16.54 | hrw|work | aha ;) |
| 16:17.02 | mickeyl | tricky, isn't it? :)) |
| 16:17.18 | hrw|work | mickeyl: so it needs cleaning a bit then |
| 16:17.23 | mickeyl | possible |
| 16:17.31 | mickeyl | some things may have landed upstream already |
| 16:19.33 | koen | how's the stuff with the celf people working out? |
| 16:20.11 | hrw|work | http://pastebin.ca/20994 - modinfo hostap_cs 0.4.4 |
| 16:22.09 | mickeyl | hmmm i will take some time to get used to the new style aliasses |
| 16:22.39 | hrw|work | "modprobe pcmcia:m*c*f*fn*pfn*pa4B801A17pb6345A0BFpcC9049A39pdC23ADC0E*" is so easy to remember... |
| 16:22.47 | mickeyl | hehe |
| 16:23.08 | *** join/#oe pH5 (n=ph5@e178207217.adsl.alicedsl.de) |
| 16:23.10 | hrw|work | pcmciautils will need modutils-modprobe for it |
| 16:23.22 | mickeyl | the full thng? |
| 16:23.23 | mickeyl | bummer |
| 16:23.35 | hrw|work | mickeyl: to get module aliases |
| 16:28.24 | hrw|work | cu |
| 16:28.36 | CIA-4 | 03rw 07org.oe.dev * r67c06308... 10/packages/vlc/ (4 files in 3 dirs): vlc-gpe: make 0.8.1 work with more recent tremor API. patch courtesy of Philipp Zabel. fixes Bug #205. |
| 16:44.44 | *** join/#oe aquadran_ (i=pablo@scummvm/undead/aquadran) |
| 16:47.01 | RP | mickeyl: Do you have gpe with a 2.4 kernel on spitz at the moment? |
| 16:47.13 | *** join/#oe kergoth_ (n=kergoth@mail.astrocorp.com) |
| 16:48.37 | RP | The config line in /etc/X11/Xserver looks wrong to me, even for 2.4. I suspect it needs 640x480@270 changed to 480x640@270 - the console might be rotated but I doubt the framebuffer is... |
| 16:48.59 | JustinP | RP: I do, yes |
| 16:49.28 | JustinP | RP: I'm the one who added that line for spitz...is it not correct? it works for me |
| 16:49.52 | JustinP | and it worked for jnc when he was testing it |
| 16:49.54 | RP | JustinP: Could you try changing the 640x480 to 480x640 and see if Xserver still works please? You'd better stop gpe-dm from initing on boot just in case... |
| 16:50.04 | *** join/#oe _ggilbert (n=ggilbert@tinman.treke.net) |
| 16:50.05 | JustinP | (and I assume it's workin on the e-image since people haven't yelled at me about it) |
| 16:50.17 | RP | JustinP: It might work but it looks wrong - the framebuffer is 480x640, not 640x480 |
| 16:50.34 | RP | It doesn't support hardware rotation |
| 16:50.44 | JustinP | RP: surely I don't need to reboot to make it take effect... |
| 16:51.11 | RP | JustinP: No, just restart X - if it screws up the display - reboot instantly though |
| 16:51.15 | JustinP | and I think I tried that at onc epoint but it didn't help my TS rotation problems so I left it as it is now... |
| 16:51.18 | JustinP | ok |
| 16:52.26 | RP | I'm seeing certain problems under 2.6 which I doubt will happen with 2.4 - 2.6 pxafb has a massive black hole in its mode handling... |
| 16:52.45 | JustinP | worke exactly the same |
| 16:52.56 | RP | That's what I thought would happen |
| 16:53.01 | JustinP | the only reason that's in there is to fix rotation problems |
| 16:53.20 | JustinP | the screen size works fine if that isn't there, it's just rotated incorrectly |
| 16:53.37 | RP | Yes, you can keep the @270 which should do that |
| 16:54.05 | RP | It just should be 480x640@270 and not 640x480@270 |
| 16:54.22 | JustinP | ok |
| 16:54.24 | RP | So I'm ok to change that in OE? |
| 16:54.25 | JustinP | I'll check in that change |
| 16:54.28 | JustinP | or you can |
| 16:54.29 | JustinP | sure |
| 16:54.37 | JustinP | no problems |
| 16:54.42 | RP | I'm in the file so I can do it |
| 16:54.47 | JustinP | does it fix your 2.6 problems? |
| 16:54.59 | JustinP | make sure you change the right one... |
| 16:55.09 | RP | Yes, 2.6 works if I fix that |
| 16:55.30 | JustinP | packages/x11/x11-common/etc/X11/Xserver, right? |
| 16:55.33 | RP | There is a bug here as well as 2.6 should bomb out with the setting that's there at the moment |
| 16:56.10 | RP | I can see that Xserver-cxk.patch in gpe-dm/files has soething to do with this... |
| 16:56.19 | JustinP | not any more |
| 16:56.27 | JustinP | look at the "remove files" patch |
| 16:56.34 | JustinP | I'm removing Xserver from gpe-dm |
| 16:56.40 | JustinP | it's in x11-common now |
| 16:56.47 | JustinP | there was a discussion on the GPE list |
| 16:57.07 | RP | JustinP: I'm not subbed to GPE :) |
| 16:57.25 | RP | I'll alter the other file then, thanks for the pointer :) |
| 16:57.28 | JustinP | I moved a bunch of scripts from gpe-dm and gpe-session-scripts to x11-common to allow for other X systems to use them (i.e. e17) |
| 16:57.31 | JustinP | np |
| 16:58.02 | JustinP | right now they're removed with makefile patches...hopefully they'll get updated soon and we can put up a tarball for x11-common somewhere..... |
| 16:58.45 | emte | hey JustinP |
| 16:59.04 | JustinP | emte: hey |
| 16:59.07 | JustinP | got to run, meeting |
| 16:59.11 | JustinP | I'll be back in a bit |
| 16:59.23 | emte | i am curious ... you are aware that e17 has its own rotation code ... |
| 16:59.52 | lardman|work | night all |
| 17:00.29 | RP | emte: Its more just specifiying which is the default rotation for different devices... |
| 17:02.01 | emte | yeah i understand that |
| 17:02.23 | emte | i just wasnt sure if he was aware of it |
| 17:02.34 | emte | e doesnt care which direction it goes |
| 17:03.31 | RP | emte: excellent :). To complicate things the C series Zaurii have switches so the screen can auto rotate to the right orientation depending on how the device is held :) |
| 17:03.32 | CIA-4 | 03rpurdie 07org.oe.dev * r26a17ae9... 10/packages/x11/x11-common/etc/X11/Xserver: x11-common: Correct spitz resolution - confirmed on 2.4 and fixes Xserver on 2.6 kernels |
| 17:03.38 | emte | i was playing with the rotation code the otehr day is why it just occured to me |
| 17:04.02 | emte | nah that doesnt complecate it |
| 17:04.11 | emte | setup a listener to auto-rotate |
| 17:04.19 | emte | problem solved |
| 17:05.04 | emte | i am discovering ecore's listeners to be very handy things |
| 17:14.18 | *** join/#oe Timelord (n=TL@216.137.177.102) |
| 17:14.21 | *** join/#oe blgoeris (n=siggi@p54BF6A1A.dip.t-dialin.net) |
| 17:14.25 | RP | emte: They sound it :). Just needs someone to write the platform support code I guess |
| 17:17.41 | *** join/#oe stevenh (n=shelder@65.167.23.2) |
| 17:21.18 | emte | http://enlightenment.org/doxy/ecore/config__listener__example_8c-example.html |
| 17:21.24 | emte | RP, example for you |
| 17:21.29 | emte | easy peasy |
| 17:21.49 | emte | all that one does is alter ecore_config |
| 17:22.40 | emte | i'll keep in mind the zaurus-rotate tho when i setup biohazard's |
| 17:23.14 | emte | i wasnt aware it had a mercury/tilt switch |
| 17:23.58 | RP | emte: Not tilt switch - the screen has a hinge and it can change from a clamshell to a tablet |
| 17:24.11 | *** join/#oe incinerator (n=incinera@82-41-24-164.cable.ubr04.edin.blueyonder.co.uk) |
| 17:24.15 | RP | There are physical switches to detect the position of the screen |
| 17:24.59 | emte | ah, i thought you ment it was a gravity rotate |
| 17:25.22 | emte | tho the code would be the same |
| 17:25.32 | RP | emte: No, but the principle is the same |
| 17:25.33 | emte | yup |
| 17:25.42 | RP | When you fold the screen, its nice to have it react :) |
| 17:25.57 | emte | yup |
| 17:39.57 | *** join/#oe mithro (n=tim@c213-100-42-188.swipnet.se) |
| 17:42.59 | koen | mickeyl: is pcmcia applet included in all images? |
| 17:54.15 | *** join/#oe hufnus (n=slonsiki@m661136d0.tmodns.net) |
| 18:01.00 | *** join/#oe hrw (n=szczepan@c36-51.icpnet.pl) |
| 18:01.05 | hrw | hi |
| 18:01.10 | hrw | mickeyl: ping |
| 18:06.25 | *** join/#oe qfh (n=qfh@ppp-82-135-6-26.mnet-online.de) |
| 18:17.26 | *** join/#oe gremlin[it] (n=gremlin@194-177-126-116.f4.ngi.it) |
| 18:19.34 | gremlin[it] | good evening !!! |
| 18:19.40 | kergoth_ | hey |
| 18:19.44 | *** part/#oe patw (i=pat@amd.co.at) |
| 18:20.01 | gremlin[it] | hi kergoth ! |
| 18:20.44 | CIA-4 | 03hrw 07org.oe.dev * rb1c39c88... 10/packages/hostap/ (4 files in 2 dirs): added hostap modules 0.4.4 (development version which works with kernel 2.6.13) |
| 18:20.50 | CIA-4 | 03hrw 07org.oe.dev * r6ea9d797... 10/packages/pcmciautils/ (pcmciautils_005.bb pcmciautils_007.bb): updated pcmciautils to 007 |
| 18:20.55 | CIA-4 | 03hrw 07org.oe.dev * r5a11cecc... 10/packages/pcmciautils/ (pcmciautils_001.bb pcmciautils_002.bb pcmciautils_003.bb): removed old versions of pcmciautils |
| 18:21.32 | *** join/#oe ggilbert_ (n=ggilbert@tinman.treke.net) |
| 18:27.40 | gremlin[it] | mhhh question about bitbake ... what are the full list of commands ( supplied with -c ) ??? |
| 18:28.34 | kergoth_ | do a bitbake -c listtasks on the .bb file and look :P |
| 18:28.35 | koen | bitbake -b file.bb -clisttasks |
| 18:28.48 | gremlin[it] | thanks ... |
| 18:32.46 | lamikr | I have put patches that add h6300 support today to bugzilla, is there any hope somebody could check them today? I will leave on friday for a one week trip, so if we need to make some changes I can only try on today or tomorrow. (bugs 255 and 256) |
| 18:33.23 | koen | kergoth_: is your monotone key in already? |
| 18:33.49 | kergoth_ | koen: heh, mickey did so, but then i did something stupid.. removed my .db without exporting my keys |
| 18:33.55 | kergoth_ | so now i need to generate a new set :) |
| 18:37.30 | hrw | in update-alternatives higher priority value means higher priority or vice versa? in other words - does 20 is more important then 50 or 50 then 20? |
| 18:38.10 | kergoth_ | from the man page: |
| 18:38.14 | kergoth_ | " Each alternative has a priority associated with it. When a link group |
| 18:38.14 | kergoth_ | <PROTECTED> |
| 18:38.14 | kergoth_ | <PROTECTED> |
| 18:38.14 | kergoth_ | " |
| 18:38.29 | hrw | ok |
| 18:38.40 | kergoth_ | so i'd say 50 is more important than 20 |
| 18:39.07 | kergoth_ | man, these coffee shops are gonna bankrupt me. i need to buy an espresso/cappuccino machine |
| 18:39.41 | gremlin[it] | i can't find where (specially in kernel 2.6 but also 2.4) is defined the partition scheme of the flash ... my attemps to run kernel 2.6 in h3600 fail cause a kernel panic on trying to mount root fs :( ... |
| 18:42.08 | *** join/#oe mreimer (n=mreimer@bilbo.vpop.net) |
| 18:43.27 | mreimer | still trying to build gpe-image. now getting "Cannot satisfy the following dependencies for gpe-task-base: hotplug" |
| 18:44.17 | mreimer | I see build/tmp/work/hotplug-dbus-0.9-r1 |
| 18:44.19 | mreimer | Ideas? |
| 18:44.41 | koen | does hotplug-dbus provide 'hotplug'? |
| 18:44.54 | lamikr | mreimer: How about if you run "bitbake hotplug" and then "bitbake gpe-image"? |
| 18:44.55 | mreimer | hi koen. How do I check that? |
| 18:45.15 | mreimer | lamikr: ERROR: Nothing provides hotplug |
| 18:45.37 | koen | mreimer: ar x build/tmp/work/hotplug-dbus-0.9-r1.ipk and check control.tar.gz |
| 18:46.31 | koen | or check build/tmp/work/Packages |
| 18:47.18 | mreimer | koen: what am I looking for? Provides: hotplug? |
| 18:47.30 | koen | something like that |
| 18:47.56 | hrw | mreimer: hotplug-dbus RDepend on hotplug |
| 18:48.31 | hrw | kergoth_: so module-init-tools needs update to be higher priority then busybox |
| 18:48.43 | mreimer | hrw: yes, "Depends: hotplug" |
| 18:49.42 | mreimer | koen: linux-hotplug-doc and linux-hotplug both provide, replace, conflict with hotplug |
| 18:49.49 | mreimer | is that a problem? |
| 18:50.18 | koen | iirc linux-hotplug is the correct one |
| 18:50.31 | koen | but I confused them earlier |
| 19:01.51 | CIA-4 | 03ph5 07org.oe.dev * r74801abf... 10/conf/bitbake.conf: mkdir the 'patches' directory before calling quilt |
| 19:02.39 | kergoth_ | heh, thats a quick and easy fix for that bug |
| 19:03.34 | pH5 | kergoth_: wait till you see the next one |
| 19:05.10 | *** join/#oe Timelord (n=TL@216.137.177.102) |
| 19:05.34 | CosmicPenguin | Wait - I thought we already did that |
| 19:05.36 | CosmicPenguin | a long time ago |
| 19:05.40 | *** join/#oe _law1 (n=_law_@213.173.86.202) |
| 19:06.37 | *** join/#oe _alwin_ (n=ral@cable-195-14-254-208.netcologne.de) |
| 19:09.02 | CIA-4 | 03ph5 07org.oe.dev * r65c6c7a1... 10/classes/kernel.bbclass: fix regexp to strip cvs kernel versions, too. (fixes #230) |
| 19:13.25 | lamikr | Has others expericenced that /etc/profile file build by gpe-image does not have executable bits "x" set? That's happening in familiar-0.8.3 distro. |
| 19:14.28 | CosmicPenguin | /etc/profile should not have the executable bits set |
| 19:16.17 | kergoth_ | lamikr: it should be sourced by the shell, not executed. |
| 19:17.02 | *** join/#oe tmbinc (n=tmbinc@support.de.elitedvb.net) |
| 19:17.32 | *** part/#oe blgoeris (n=siggi@p54BF6A1A.dip.t-dialin.net) |
| 19:18.08 | mreimer | what's a good machine conf file to start from for a 2.6 kernel? I want to make h2200.conf |
| 19:20.06 | koen | is that really needed? |
| 19:20.06 | mreimer | I dunno. What would be the right way to build a rootfs for h2200? |
| 19:20.06 | koen | e.g different mkfs.jffs2 params |
| 19:20.07 | *** join/#oe _law_ (n=law@213.173.86.202) |
| 19:20.26 | koen | KERNEL="kernel26" in local.conf and MACHINE=h3900 |
| 19:20.45 | *** part/#oe _law1 (n=_law_@213.173.86.202) |
| 19:21.05 | gremlin[it] | mreimer was u working on kernel 2.6 for h3600 ??? |
| 19:21.07 | mreimer | that's what I'm doing right now, but I'm getting errors: Cannot satisfy the following dependencies for task-bootstrap: kernel-module-h3900-lcd-2.6 kernel-module-h5400-lcd-2.6 kernel-module-asic2-adcts-2.6 kernel-module-apm-2.6 kernel-module-h5400-battery-2.6 kernel-module-h3900-battery-2.6 kernel-module-pcmcia-core-2.6 |
| 19:21.11 | lamikr | ok, then I have a somekind of problem. We have /etc/profile.d/tslib.sh that is executed by the /etc/profile script. Tslib.sh sets two environment variables that are needed by the touschscreen driver but for some reason that script is not executed before /etc/init.d/gpe-dm is started. --> touschreen driver does not work. I have put that working simply by adding call to /etc/profile from the /etc/init.d/gpe-dm script but it seems that this is not the cor |
| 19:21.17 | mreimer | gremlin[it]: no, h2200 |
| 19:21.30 | gremlin[it] | mreimer ops my mistake :) |
| 19:21.51 | hrw | cu |
| 19:22.07 | *** join/#oe law (n=law@213.173.86.202) |
| 19:22.29 | kergoth_ | lamikr: init scripts are not run by login shells, and as such do not get the profile sourced. having the init script do so is probably the best solution, or execute gpe-dm in the script using exec -l (iirc, exec's it using a login shell) |
| 19:23.18 | *** join/#oe Timelord0 (n=TL@216.137.177.102) |
| 19:30.28 | *** join/#oe hufnus (n=slonsiki@m661136d0.tmodns.net) |
| 19:31.26 | lamikr | Wondering how this is working for other devices like h3600, as we are using same initscripts than other devices... We have Just added /usr/share/tslib/ts.conf-h6300 and /etc/profile.d/tslib.sh configs to use it. h2200 and h3600 uses same approach. |
| 19:33.08 | CIA-4 | 03ph5 07org.oe.dev * r4a2c1667... 10/classes/kernel.bbclass: |
| 19:33.08 | CIA-4 | makes the kernel-module-af-packet package add "alias net-pf-17 af_packet" to |
| 19:33.08 | CIA-4 | /etc/modules.conf (fixes #233). |
| 19:39.26 | CIA-4 | 03ph5 07org.oe.dev * r1d77ddb0... 10/packages/libdaemon/libdaemon_0.6.bb: install dexec.h into the staging area |
| 20:00.32 | dwildes | '/clear |
| 20:00.45 | dwildes | ooops - sorry :) |
| 20:12.23 | mickeyl | koen: yes, it should be in all opie-images. |
| 20:12.26 | mickeyl | hrw|gone: pong |
| 20:12.57 | koen | mickeyl: I noticed |
| 20:13.18 | koen | the conceptronic pcmcia card is just rubbish |
| 20:13.33 | mickeyl | conceptronic? what's that doing |
| 20:13.42 | koen | 10mbit ethernet card |
| 20:13.47 | mickeyl | ah. |
| 20:13.54 | mickeyl | no |
| 20:13.55 | mickeyl | billionton |
| 20:14.15 | koen | so it will be either wifi or usb |
| 20:14.45 | mickeyl | whois ph5?` |
| 20:14.53 | koen | philip zabel |
| 20:15.08 | mickeyl | hmm, k. |
| 20:15.59 | JustinP | emte: I'm not sure what you mean by "e17 has its own rotation code. I have used xrandr to rotate my screen (this is what GPE uses) and it works fine with e17. Are you saying that e has a built-in way of doing this? |
| 20:16.20 | koen | xrandr is the X way |
| 20:16.21 | mickeyl | JustinP: don't take too much attention :D |
| 20:16.23 | JustinP | emte: AFAIK the rotation is an X thing, not a WM thing. e17 can rotate its orientation but wouldn't this leave the apps rotated the wrong way? |
| 20:16.26 | koen | anything other is crap |
| 20:16.31 | JustinP | heh |
| 20:16.34 | JustinP | ok, thanks |
| 20:16.40 | treke | is e17 running in X? |
| 20:16.45 | JustinP | I really don't know anything about xrandr |
| 20:16.47 | JustinP | yes, it's in X |
| 20:16.50 | treke | I was under the impression it was running on the fb |
| 20:16.50 | JustinP | hence xrandr works |
| 20:16.51 | mickeyl | treke: yeppa. |
| 20:16.55 | JustinP | nope |
| 20:16.56 | koen | treke: configurable |
| 20:17.01 | mickeyl | treke: no, most e17 apps are X only yet. |
| 20:17.05 | JustinP | e17 and pretty much all the other *programs* need X |
| 20:17.08 | treke | ah |
| 20:17.16 | mreimer | JustinP: what's the best way to give e17 a try with OE? |
| 20:17.21 | JustinP | the libraries are set up to run on fb/qt/whatever as well, though |
| 20:17.29 | JustinP | mreimer: bitbake e-image |
| 20:17.32 | mreimer | thanks |
| 20:17.47 | treke | I thought I remembered something about raster doing an evas only e17 as well |
| 20:17.48 | JustinP | mreimer: although the unzipped image is >80MB, maybe over 90MB now |
| 20:17.49 | treke | maybe not |
| 20:18.06 | JustinP | treke: raster told me himself that e17 was X only |
| 20:18.20 | treke | Then I'm clearly mistaken |
| 20:18.33 | JustinP | treke: it *should* be possible...but all the apps would have to be built on evas as well. A WM is of no use without programs. |
| 20:18.33 | mreimer | what's the RAM footprint like? |
| 20:18.42 | JustinP | mreimer: ummm....let me check.... |
| 20:18.53 | mickeyl | works fairly well on 64MB RAM devices |
| 20:19.14 | mickeyl | "mouse" buttons being the only major thing to solve before we can release such an image |
| 20:19.23 | mickeyl | oh and a lighter theme |
| 20:19.26 | mickeyl | but that's minor |
| 20:19.57 | JustinP | mickeyl: load up the engage module and start xmonobut ;-) |
| 20:20.17 | CosmicPenguin | sounds like a Start Trek command |
| 20:20.27 | mickeyl | "make it so" |
| 20:20.34 | koen | e16 did have an lcars theme |
| 20:20.38 | CosmicPenguin | Then, you should rerount the power through the phasers and cause the DNA in the gas cloud to realign |
| 20:20.43 | koen | 'energie' |
| 20:20.43 | *** join/#oe cbrake (n=cbrake2@cpe-204-210-216-174.neo.res.rr.com) |
| 20:21.00 | koen | the german voice-overed startrek is just to scary |
| 20:21.17 | treke | hehe |
| 20:21.44 | gremlin[it] | mhhh should sound good klingon in doich :) :) :) |
| 20:22.03 | JustinP | ~57MB used on my Z with 1.3MB buffers and 33MB cached |
| 20:22.28 | JustinP | so....23MB or so? |
| 20:23.15 | mreimer | I suppose that's enough for another decent app or two to run |
| 20:23.18 | JustinP | (assuming I'm reading that right) |
| 20:23.31 | JustinP | of course I also have a swap partition ;-) |
| 20:24.06 | JustinP | actually it's not on right now |
| 20:24.13 | JustinP | forgot ot turn it on after my rebuild |
| 20:24.29 | JustinP | I need to rebuild again, actually...I've still got a hybrid GPE/e17 for my main boot |
| 20:25.00 | mickeyl | rebuild? how yesterday |
| 20:25.02 | gremlin[it] | there is screenshoot of e17 ? |
| 20:25.17 | mickeyl | JustinP: http://vanille.de/temp/efl-altboot.png ;) |
| 20:25.37 | JustinP | mickeyl: huh? I mean that the "image" on my zaurus was the GPE image and I installed e17 on top of it. I've been testing my e-images with image files. |
| 20:25.47 | JustinP | mickeyl: I saw that, looks sweet |
| 20:25.50 | mickeyl | JustinP: i know. i was just longing for a chance to post this mockup again :)) |
| 20:25.54 | JustinP | mickeyl: too bad it's only a mockup |
| 20:25.59 | mreimer | nice! |
| 20:26.00 | mickeyl | well |
| 20:26.02 | mickeyl | lets say |
| 20:26.07 | mickeyl | 60% is mockup |
| 20:26.09 | mickeyl | 40% is code |
| 20:26.23 | JustinP | you actually have some done? awesome :-) |
| 20:26.36 | JustinP | gremlin[it]: http://handhelds.org/scap/ |
| 20:26.46 | JustinP | oops...damn |
| 20:26.46 | mickeyl | most work is my C++ abstraction layer, because i can't stand C |
| 20:26.51 | mickeyl | heh |
| 20:26.53 | JustinP | there were some e17 screenshots there a little while ago |
| 20:27.15 | JustinP | mickeyl: ah....so you're readying your C++ layer for use? Any actual altboot code done? |
| 20:27.24 | kergoth_ | mickeyl: hehe, i've been shamelessly posting your mockup to #elinux and places ;) |
| 20:27.33 | mickeyl | kergoth: excellent :D |
| 20:27.51 | mickeyl | unfortunately you can't see it's animated. the two horizontal bars are glowing |
| 20:28.00 | koen | oooh |
| 20:28.00 | kergoth_ | ooh. |
| 20:28.04 | mickeyl | and to be honest... I ripped that as part of an E background |
| 20:28.21 | mreimer | btw, cairo 1.0 is out |
| 20:28.26 | mickeyl | cool |
| 20:28.43 | *** part/#oe dwildes (n=dwildes@209.164.237.195) |
| 20:29.28 | mickeyl | FYI: first dude gives actual feedback on OZ/3100. I guess it somehow works then |
| 20:29.39 | JustinP | mreimer: here you go: http://handhelds.org/scap/port.5276.png |
| 20:29.42 | CosmicPenguin | mmmm... cairo |
| 20:29.58 | mreimer | JustinP: sweet! |
| 20:30.43 | mreimer | hopefully cairo will get a little acceleration on ARM (some asm and soft-float for starters) |
| 20:30.47 | CosmicPenguin | cute |
| 20:31.56 | JustinP | mreimer: 2 more: http://handhelds.org/scap/port.5604.png |
| 20:32.09 | JustinP | http://handhelds.org/scap/port.5655.png |
| 20:32.31 | mreimer | JustinP: you're torturing me. I wonder how it will look on 240x320? |
| 20:32.40 | JustinP | mreimer: try it and see... |
| 20:32.51 | JustinP | mreimer: I'm not sure how usable entrance will be on that size screen... |
| 20:32.55 | mreimer | JustinP: I hope to |
| 20:33.22 | mreimer | has anyone successfully built gpe-image for 2.6 recently? |
| 20:33.42 | koen | NOTE: package cairo-1.0.0: completed |
| 20:33.50 | mreimer | koen: you're fast :-) |
| 20:33.56 | mickeyl | JustinP: E's theming is absolutely great. Making entrance work on 240x320 is just a matter of adjusting the theme. |
| 20:34.11 | koen | mreimer: I just copied the 0.9.2 .bb and adjusted the SRC_URI :) |
| 20:34.38 | JustinP | mickeyl: well, I know it's good, I just haven't played with the theme stuff as yet.... |
| 20:34.56 | JustinP | mickeyl: actually....e will be compiled with the lower profile for the smalle rdevices, won't it? |
| 20:35.13 | JustinP | although I'm not sure if this affects entrance.... |
| 20:35.15 | mreimer | what provides things like kernel-module-h3900-lcd-2.6? I'm getting unsatified dependencies when building gpe-image |
| 20:35.26 | mickeyl | JustinP: yes, but that won't affect the entrance theme. |
| 20:35.39 | JustinP | should be pretty easy to add a post-compile bbclass which themes |
| 20:35.42 | koen | mreimer: I think the defconfig needs to be adjusted |
| 20:36.12 | mreimer | <PROTECTED> |
| 20:36.24 | *** join/#oe woglinde (n=woglinde@e178087144.adsl.alicedsl.de) |
| 20:36.26 | CIA-4 | 03koen 07org.oe.dev * r889c17fb... 10/packages/cairo/cairo_1.0.0.bb: Add cairo 1.0.0 |
| 20:36.29 | koen | I think so |
| 20:36.40 | koen | but I haven't looked into kernels for a while |
| 20:36.59 | kergoth_ | Fatal error: Call to undefined function: get_bloginfo() in /home/groups/o/op/openzaurus/htdocs/wordpress/wp-includes/wp-db.php on line 304 |
| 20:37.00 | kergoth_ | eh |
| 20:37.02 | kergoth_ | thats no good |
| 20:37.32 | mickeyl | got that too when i hit a layer 2 likn |
| 20:37.33 | mickeyl | link even |
| 20:37.45 | mickeyl | didn't occur when starting from the main site |
| 20:38.08 | kergoth_ | odd |
| 20:38.35 | mickeyl | ~shoot sourceforge.net |
| 20:38.39 | ibot | ACTION shoots sourceforge.net in the eye with a glue gun! |
| 20:38.56 | mickeyl | we really should move to another provider, it's unbearably slow. guess they moved oz.org to the slowest server they have |
| 20:39.02 | CosmicPenguin | ouch |
| 20:40.58 | treke | hehe |
| 20:40.59 | gremlin[it] | i still have problem with "Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,1)" on kernel 2.6 with h3600 :( ... |
| 20:41.08 | treke | go sourceforge! |
| 20:41.44 | gremlin[it] | that's set linuxargs="mtdparts=ipaq:0x00040000(bootldr)ro,0x00FC0000(root) root=/dev/mtdblock1 init=/linuxrc noinitrd console=ttySA0 rootfstype=jffs2" |
| 20:41.55 | gremlin[it] | but i got from kernel : |
| 20:42.14 | gremlin[it] | SA1100 flash: CFI device at 0x00000000, 16MiB, 32-bit |
| 20:42.14 | gremlin[it] | RedBoot partition parsing not available |
| 20:42.17 | gremlin[it] | SA1100 flash: using static partition definition |
| 20:42.22 | gremlin[it] | Creating 4 MTD partitions on "sa1100": |
| 20:42.33 | gremlin[it] | ... |
| 20:42.39 | gremlin[it] | jffs2: Too few erase blocks (2) |
| 20:42.40 | gremlin[it] | Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,1) |
| 20:43.05 | JustinP | gremlin[it]: using the right updater.sh? |
| 20:43.16 | gremlin[it] | updater.sh ?!?!? |
| 20:43.26 | JustinP | gremlin[it]: just a guess |
| 20:43.34 | JustinP | no idea what you're actually doing... |
| 20:43.40 | gremlin[it] | h3600 (the old) ... not h6300 ... |
| 20:44.06 | koen | JustinP: updater.sh is a sharp only thing |
| 20:44.33 | gremlin[it] | ahhh :) ... i thought i was doing completelly wrong procedure |
| 20:44.47 | JustinP | ah....yes, ok, sorry |
| 20:45.13 | gremlin[it] | i built a task-image with a familiar kernel26 h3600 ... using oe :) |
| 20:49.49 | *** join/#oe qfh^ (n=qfh@ppp-82-135-6-26.mnet-online.de) |
| 20:52.11 | emte | JustinP, no it handles rotating everything |
| 20:52.22 | emte | wethere the apps like it or not ... |
| 20:52.26 | emte | weather* |
| 20:52.47 | *** join/#oe mrz80 (n=scotsman@n128-227-69-158.xlate.ufl.edu) |
| 20:52.51 | emte | i cant imagine a non-e app behaving very well, you are correct |
| 20:53.16 | koen | a *wm* handles rotating? |
| 20:53.17 | emte | mmm red bean bun |
| 20:53.22 | emte | yup |
| 20:53.25 | koen | are you sure you aren't on crack? |
| 20:53.46 | emte | there are even examples in the cookbook |
| 20:53.53 | emte | sec i'll grab you a link |
| 20:54.40 | mickeyl | slowly guys. Evas handles rotation - which is perfectly on spec for a canvas abstraction layer. You *could* use that on the X backend as well, but it's pretty worthless. It has been designer for the non-rotatable backends like the FB. |
| 20:55.03 | koen | that's what I thought |
| 20:55.15 | emte | http://enlightenment.org/docs/eflcookbook.html#id2460452 |
| 20:55.18 | JustinP | emte: exactly, non-EFL apps are going to go bonkers. You can go ahead and patch e17 and try it yourself, but I'm positive it's not going to work for X apps |
| 20:55.20 | koen | and why I said '*wm*' |
| 20:55.32 | JustinP | same thing I said earlier |
| 20:56.08 | emte | nah, i dont plan on doning stuff for x-apps |
| 20:56.22 | emte | trying to convince some programmers now to write e-apps |
| 20:56.33 | CIA-4 | 03pohly 07org.oe.dev * rb4bff47a... 10/conf/machine/h3900.conf: bugzilla bug 83: list all supported architectures so that tune-xscale can be used |
| 20:56.58 | emte | getting them to do some of the cookbook examples to get a basic handle on the code |
| 20:57.18 | koen | emte: I can't see an example of the wm doing rotation |
| 20:57.21 | koen | only evas |
| 20:57.51 | emte | e is one evas canvas container taht contains objects |
| 20:58.03 | koen | are you blind? |
| 20:58.15 | koen | WM WM WM WM WM WM WM |
| 20:58.25 | emte | if you simplify it down enough that is all it is |
| 20:59.10 | koen | no, it isn't |
| 20:59.11 | emte | then you add in all your callbacks, listeners, and handlers |
| 20:59.24 | koen | the wm manages X windows |
| 20:59.30 | koen | including the rootwin |
| 21:00.12 | koen | it does *NOT* paint regular apps on an evas canvas |
| 21:00.32 | emte | no it cant |
| 21:00.32 | koen | so it does *NOT* do rotation |
| 21:01.09 | kergoth_ | ;) |
| 21:01.49 | reenoo_ | kergoth_: hehe. I've been missing that while you were away ;) |
| 21:02.05 | kergoth_ | hehe |
| 21:02.13 | kergoth_ | my old boss told me i should tell prospective employers to google for kergoth |
| 21:02.25 | CosmicPenguin | heh |
| 21:02.26 | kergoth_ | i considered all the ircl ogs out there of me berating some noob, and decided against that |
| 21:02.27 | reenoo_ | heh |
| 21:02.44 | CosmicPenguin | Mabye you can bribe tim to do a perl s/kergoth// on the irc logs |
| 21:02.49 | kergoth_ | hehe |
| 21:03.11 | kergoth_ | "no really, i'm nice when i'm paid to be! just not on my own time!" |
| 21:03.37 | gremlin[it] | mhhh i start to suppose kernel-2.6 don't support flash for h3600 :( :( :( ... |
| 21:04.14 | emte | i only suggested it as a possible option for dealing with the zaurus rotate switch for the e-image nothing more |
| 21:04.55 | reenoo_ | gremlin[it]: I don't think 2.6 is ready for end users on h3600 |
| 21:05.49 | gremlin[it] | no end user ... either (beginners) developer ... if u enable mtd ipaq maping kernel don't compile ;( |
| 21:06.41 | gremlin[it] | | drivers/built-in.o: In function `h3xxx_really_set_vpp': |
| 21:06.54 | emte | gremlin[it], which part of the sa-1110 did you write your code for? |
| 21:06.54 | gremlin[it] | | freq_table.c:(.text+0x40b90): undefined reference to `assign_h3600_egpio' |
| 21:07.00 | kergoth_ | gremlin[it]: this really isnt the channel for this. try #handhelds.org |
| 21:07.16 | gremlin[it] | emte ... micro |
| 21:07.50 | gremlin[it] | kergoth i know ... but here at least i got some answer ... on #handhelds.org no one speak :( ... sorry |
| 21:08.16 | koen | djeez |
| 21:08.21 | emte | yeah, the same thing happens when i try to talk to myself like reenoo_ tells me to |
| 21:08.35 | koen | when will people realize that opie isn't installed on every embedded device |
| 21:08.39 | koen | morons |
| 21:10.14 | kergoth_ | :( |
| 21:10.29 | reenoo_ | koen: relax ;) |
| 21:17.32 | *** join/#oe ibot (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) |
| 21:17.32 | *** topic/#oe is OpenEmbedded Developer Lounge | http://bugs.openembedded.org/ | This is not a distribution support channel | OE and bitbake were made to match, keep them both up to date |
| 21:21.01 | *** join/#oe dwildes (n=dwildes@209.164.237.195) |
| 21:21.03 | koen | ~kergoth |
| 21:21.05 | ibot | methinks kergoth is Chris Larson, an embedded linux guy at Texas Instruments. Email at kergoth@handhelds.org or clarson@ti.com. OpenZaurus project founder. Core dev / architect on the BitBake, OZ, and OpenEmbedded projects. |
| 21:21.15 | kergoth_ | heh, thats old |
| 21:21.29 | koen | ~cluebat |
| 21:21.30 | ibot | *WHACK* *WHACK* *WHACK* |
| 21:21.35 | koen | :) |
| 21:22.36 | kergoth_ | ~no, kergoth is Chris Larson, an embedded linux guy currently at Astrocom Corporation (http://www.astrocorp.com/). Email at kergoth@handhelds.org or clarson@astrocorp.com. Core dev / architect on the BitBake, OZ, and OpenEmbedded projects. Maintainer of the tslib project. |
| 21:22.49 | kergoth_ | bah, silly bot |
| 21:22.50 | kergoth_ | ibot: no, kergoth is Chris Larson, an embedded linux guy currently at Astrocom Corporation (http://www.astrocorp.com/). Email at kergoth@handhelds.org or clarson@astrocorp.com. Core dev / architect on the BitBake, OZ, and OpenEmbedded projects. Maintainer of the tslib project. |
| 21:22.51 | ibot | kergoth_: okay |
| 21:24.28 | emte | grr |
| 21:24.57 | emte | must be a rule ... |
| 21:35.07 | *** join/#oe ibot (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) |
| 21:35.07 | *** topic/#oe is OpenEmbedded Developer Lounge | http://bugs.openembedded.org/ | This is not a distribution support channel | OE and bitbake were made to match, keep them both up to date |
| 21:35.22 | JustinP | all right, going to get some work done now |
| 21:43.20 | sirfred | Good night. |
| 21:43.50 | *** part/#oe sirfred (n=mteira@92.Red-81-44-140.pooles.rima-tde.net) |
| 21:47.32 | gerwinin | How do I upload a new kernel to oe ? |
| 21:52.22 | emte | to your device or the metafile to the repo? |
| 21:52.59 | mreimer | I'm still getting errors building gpe-image: "Cannot satisfy the following dependencies for gpe-task-base: hotplug". Any more ideas? According to Packages, linux-hotplug-doc and linux-hotplug both claim to provide, replace, and conflict with hotplug |
| 21:53.30 | pb_ | mreimer: that would be the problem. |
| 21:53.55 | mreimer | pb_: I thought that might be. How can I go about solving it? |
| 21:54.07 | gerwinin | The metafile |
| 21:54.09 | mreimer | both ipks are built |
| 21:54.24 | pb_ | mreimer: linux-hotplug-doc should not be providing, conflicting with, or replacing hotplug. I think the .bb file for linux-hotplug is defective. |
| 21:55.03 | mreimer | that would be linux-hotplug_20040920.bb ? |
| 21:55.13 | pb_ | mreimer: right. it sounds like you need to replace RDEPENDS with RDEPENDS_${PN}, and likewise for RCONFLICTS and RREPLACES. |
| 21:55.41 | mreimer | do you mean RPROVIDES (not RDEPENDS)? |
| 21:55.49 | pb_ | er, yeah, sorry |
| 21:55.51 | pb_ | ~lart pb_ |
| 21:55.52 | *** join/#oe CosmicPenguin (n=nobody@aus-ext-proxy01.amd.com) |
| 21:55.56 | mreimer | ok, thanks |
| 21:57.04 | emte | gerwinin, send it to the mailing list/or the other place taht i for get |
| 21:59.35 | reenoo_ | gerwinin: attach the files you want to be added to a bug filed at bugs.openembedded.org |
| 22:03.07 | emte | odd concept, metafile additions are bugs :P |
| 22:03.24 | emte | most likly true for the most part |
| 22:03.39 | kergoth_ | bug trakcing systems are generally used for both feature requests and bugs |
| 22:03.54 | CosmicPenguin | As they should be |
| 22:05.04 | gremlin[it] | GOT PROMPT !!! |
| 22:05.09 | gremlin[it] | root@h3600:~# uname -a |
| 22:05.15 | gremlin[it] | Linux h3600 2.6.12-hh2 #17 Wed Aug 24 23:45:15 CEST 2005 armv4l unknown |
| 22:05.47 | emte | good job gremlin[it] |
| 22:05.59 | gerwinin | If you want to start a built from the beginning which bitbake command do you use ? |
| 22:06.21 | emte | rm -Rf tmp ? |
| 22:06.33 | koen | what do you mean? |
| 22:06.53 | koen | or rather: what do you want to do? |
| 22:07.07 | gerwinin | I want to erase my previous built from opie-image |
| 22:07.10 | *** join/#oe _ggilbert (n=ggilbert@tinman.treke.net) |
| 22:07.12 | gerwinin | And start all over again |
| 22:07.52 | koen | rm -rf build/tmp ; bitbake opie-image |
| 22:08.03 | gremlin[it] | i'm happy and i go to bed ;) :) :) |
| 22:08.17 | dwildes | gerwinin: if you want to automatically purge the directory, re-extract the source, apply patches - without rebuilding everything. I do 'bitbake rebuild <package>' |
| 22:08.29 | emte | night gremlin[it] |
| 22:08.40 | gremlin[it] | byeeeeeeeee |
| 22:08.50 | koen | 'night gremlin[it] |
| 22:10.49 | gerwinin | night gremlin |
| 22:12.55 | *** join/#oe rwhitby-away (n=rwhitby@nslu2-linux/rwhitby) |
| 22:15.30 | mreimer | pb_: what do I need to do after editing the .bb to get bitbake to see the change? I ran "parse" and then "rebuild linux-hotplug", but the resulting still has the same provides, conflicts, replaces |
| 22:15.55 | mreimer | in the bb I'm using RPROVIDES = "hotplug_${PN}", RCONFLICTS = "hotplug_${PN}", RREPLACES = "hotplug_${PN}" |
| 22:16.02 | pb_ | mreimer: did you increment PR? |
| 22:16.11 | pb_ | if not, do that |
| 22:16.14 | mreimer | nope. that's what I'm missing |
| 22:16.19 | mreimer | reparse? |
| 22:16.25 | pb_ | yeah |
| 22:18.03 | mreimer | are ipkgs like kernel-module-h3900-lcd-2.6 generated automatically by ipkg-make-kernel2.6-packages based on what the build generates? So whatever modules are created get packages up according to some munging of their names? |
| 22:19.40 | pb_ | right, although oe doesn't use the ipkg-make-kernel*-packages scripts. |
| 22:19.51 | pb_ | it has its own stuff, which lives in kernel.bbclass. |
| 22:20.46 | mreimer | the reason I'm asking is because when building gpe-image I'm getting "Cannot satisfy the following dependencies for task-bootstrap: kernel-module-h3900-lcd-2.6...". Do I just need to keep tweaking the ipaqpxa_defconfig until it properly builds these missing modules? |
| 22:21.06 | pb_ | yeah, probably |
| 22:21.17 | mreimer | ok, I'll keep at it. thanks as always |
| 22:21.33 | *** part/#oe pH5 (n=ph5@e178207217.adsl.alicedsl.de) |
| 22:24.42 | emte | damn strcpy ... |
| 22:26.58 | pb_ | mreimer: okay, cool |
| 22:34.05 | yOyOeK | package xdpyinfo compilation error on configure |
| 22:34.48 | yOyOeK | checking xext xtst package xtst was not sound :( |
| 22:35.10 | mreimer | yOyOeK: try updating; I think a fix was committed in the last day |
| 22:46.01 | mreimer | bitbake -i rocks |
| 23:00.18 | CIA-4 | 03nail 07org.oe.dev * ra91a76a6... 10/packages/ (3 files in 3 dirs): Move qc-usb |
| 23:00.23 | CIA-4 | 03nail 07org.oe.dev * ra6cc7e9f... 10/packages/meta/openslug-packages.bb: Re-add qc-usb-messenger to openslug feed |
| 23:00.27 | CIA-4 | 03nail 07org.oe.dev * r617b38d3... 10/packages/ (2 files in 2 dirs): Update DESCRIPTION |
| 23:08.26 | *** join/#oe Geo_KM (n=keith@ppp63-196.lns1.cbr1.internode.on.net) |
| 23:08.47 | CIA-4 | 03nail 07org.oe.dev * rd1519ff3... 10/packages/musicpd/mpd_0.11.5.bb: Update mpd to latest version |
| 23:08.52 | CIA-4 | 03nail 07org.oe.dev * r9fd4fd7a... 10/packages/libao/libao_0.8.6.bb: Update libao to latest version |
| 23:09.45 | JustinP | ok....if I want to run a script whenever usbd0 is started up (i.e. when I plug a mini-B connector into my zaurus and the other end into a PC) where do I put it? |
| 23:09.53 | JustinP | hotplug seems like the plae but I'm not sure where.... |
| 23:32.51 | JustinP | ::sigh:: |
| 23:33.20 | JustinP | and it would probably not work anyway...I added some code to net.agent and it works...except reloading the module causes it to be run again, of course... |
| 23:43.59 | CIA-4 | 03rpurdie 07org.oe.dev * r8bdd9843... 10/packages/linux/linux-openzaurus_2.6.13-rc5-mm1.bb: linux-oz-2.6: general cleanup of spitz patches. Disable debugging of common power/battery code |
| 23:47.05 | *** join/#oe Timelord (n=TL@66.84.189.72) |
| 23:57.35 | reenoo_ | 'night all |
| 23:58.02 | *** join/#oe CosmicPenguin (n=nobody@aus-ext-proxy02.amd.com) |
