00:00.15 | *** part/#oe orbarron|OoO (n=orb@nat/ti/x-vzwgnrhumbwovmqi) |
00:10.20 | *** join/#oe rsalveti (n=rsalveti@189.115.172.148) |
00:16.21 | *** join/#oe thaytan (n=jan@78.16.81.164) |
00:25.13 | *** join/#oe starek (n=marel@unaffiliated/romani) |
00:25.26 | *** part/#oe starek (n=marel@unaffiliated/romani) |
00:27.47 | *** join/#oe hufnus_cicq (n=hufnus_c@69-12-177-67.dsl.static.sonic.net) |
00:46.09 | *** join/#oe kergoth (n=kergoth@ip24-251-170-95.ph.ph.cox.net) |
00:47.47 | *** join/#oe BenLauDC (n=benlau@221.125.8.18) |
00:53.12 | *** join/#oe benlau2 (n=benlau@221.125.8.45) |
01:02.36 | *** join/#oe mithro (n=tim@unaffiliated/mithro) |
01:04.21 | *** join/#oe frogger_ (n=frogger@cl-2094.ham-01.de.sixxs.net) |
01:04.51 | *** join/#oe freddy (n=freddy@hotel742.server4you.de) |
01:22.15 | *** join/#oe kg4ysn (n=kg4ysn@gateway.headnut.org) |
01:24.08 | kg4ysn | has anyone had success with src_distribute_local added to INHERIT? |
01:40.55 | *** join/#oe Ironnads_ (n=Ironnads@host86-144-102-167.range86-144.btcentralplus.com) |
01:44.03 | kg4ysn | ah nevermind, looks like i didn't clean /tmp well enough |
01:46.38 | *** join/#oe marcosmamorim (n=marcos@201-43-208-59.dsl.telesp.net.br) |
01:50.03 | nullpuppy | kergoth: where is the tmp/deploy/etc dir? i'm not finding one in me OE tree anywhere. |
01:50.28 | kergoth | TMPDIR defaults to ${TOPDIR}/tmp |
01:50.37 | kergoth | topdir defaults to $PWD, where you ran the bitbake command |
01:52.06 | kergoth | http://docs.openembedded.org/usermanual/html/gettingoe_configuring_oe.html |
01:52.42 | kergoth | to use that example structure, it would be $OEBASE/build/tmp/deploy/images/, assuming you run in build, which is the usual case |
01:53.44 | kergoth | nullpuppy: http://docs.openembedded.org/usermanual/html/usage_workspace.html describes this. |
01:54.00 | nullpuppy | hmm |
01:55.21 | nullpuppy | ok. i wonder if i rm'd tmp, cause i'm not finding one. *sigh* |
01:55.54 | *** join/#oe mekius (n=mekius@enlightenment/developer/mekius) |
01:57.34 | kergoth | tmp is created when you do a build, relative to the dir you run the command in |
01:57.58 | kergoth | can always explicitly set TOPDIR or TMPDIR in local.conf to make it always emit relative to the build dir |
01:58.00 | kergoth | many do so |
01:59.09 | nullpuppy | yeah. i still had the screen session open that i ran bitbake in, (which, since i was following angstrom build instructions, was in $(OE)/openembedded) |
02:00.02 | nullpuppy | and the setup script isn't changing TOPDIR or TMPDIR so.. i dunno what happened. |
02:00.57 | kergoth | shrugs |
02:01.17 | nullpuppy | yep, pretty much. |
02:01.22 | nullpuppy | rebuilding now. |
02:03.04 | nullpuppy | *sigh* screen -x can be so unreliable sometimes. |
02:04.58 | nullpuppy | hmm, and i don't see a tmp being generated. /me pokes around a bit. |
02:10.36 | nullpuppy | kergoth: ok... if its not creating a tmp dir in pwd, have any idea what i should do or look for/at? |
02:10.55 | nullpuppy | oooh |
02:10.56 | kergoth | bitbake -e | grep \^TMPDIR= |
02:10.59 | nullpuppy | ignore that. |
02:11.35 | nullpuppy | the local.conf is setting it ;) |
02:12.11 | nullpuppy | however, i don't have a deploy/images. i do have a deploy/ which only has glibc in it. |
02:12.30 | nullpuppy | ah ha! ok. |
02:12.54 | nullpuppy | things make a lot more sense now. thanks. |
02:33.02 | *** join/#oe ctusar (n=ctusar@c-71-58-119-148.hsd1.pa.comcast.net) |
02:43.10 | *** join/#oe archae0pteryx (n=snewman@69-12-128-192.dsl.static.sonic.net) |
02:46.51 | *** join/#oe orbarron (n=orb@pool-96-226-149-102.dllstx.fios.verizon.net) |
02:53.19 | *** join/#oe archae0pteryx1 (n=snewman@207.47.42.130.static.nextweb.net) |
03:11.34 | *** join/#oe fraxinas (n=quassel@p4FD6481F.dip.t-dialin.net) |
03:20.47 | *** join/#oe reachfh (n=reachfh@123-204-22-190.dynamic.seed.net.tw) |
03:30.52 | *** join/#oe sicu_ (n=n_a@cm-84.208.110.191.getinternet.no) |
03:30.52 | *** join/#oe archae0pteryx1 (n=snewman@207.47.42.130.static.nextweb.net) |
03:30.52 | *** join/#oe mekius (n=mekius@enlightenment/developer/mekius) [NETSPLIT VICTIM] |
03:30.52 | *** join/#oe Ironnads_ (n=Ironnads@host86-144-102-167.range86-144.btcentralplus.com) |
03:30.52 | *** join/#oe freddy (n=freddy@hotel742.server4you.de) |
03:30.52 | *** join/#oe frogger_ (n=frogger@cl-2094.ham-01.de.sixxs.net) [NETSPLIT VICTIM] |
03:30.52 | *** join/#oe benlau2 (n=benlau@221.125.8.45) [NETSPLIT VICTIM] |
03:30.52 | *** join/#oe BenLauDC (n=benlau@221.125.8.18) [NETSPLIT VICTIM] |
03:30.52 | *** join/#oe thaytan (n=jan@78.16.81.164) [NETSPLIT VICTIM] |
03:30.52 | *** join/#oe CIA-2 (n=CIA@208.69.182.149) [NETSPLIT VICTIM] |
03:30.52 | *** join/#oe jpereira (n=jpereira@unaffiliated/jpereira) [NETSPLIT VICTIM] |
03:30.52 | *** join/#oe MWelchUK_work__ (n=welchma@65.91.2.71) [NETSPLIT VICTIM] |
03:30.52 | *** join/#oe chouimat (n=quassel@CPE002129b5a060-CM0011e6c40c15.cpe.net.cable.rogers.com) |
03:30.52 | *** join/#oe pocek (i=pock@87-205-78-228.adsl.inetia.pl) [NETSPLIT VICTIM] |
03:30.52 | *** join/#oe reid04 (n=reid85@CPE001cdf73661f-CM001ceacec55e.cpe.net.cable.rogers.com) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe Artful (n=Laruft@cpc4-hers2-0-0-cust792.hers.cable.ntl.com) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe DJWillis (n=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe nullpuppy (n=dustin@c-98-237-195-243.hsd1.wa.comcast.net) |
03:30.53 | *** join/#oe dhd (n=dhuggins@LIMA-2.SPEECH.CS.CMU.EDU) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe hrw|gone (n=hrw@chello089078170228.chello.pl) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe koobe_ (n=matti@83.150.95.26) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe jconnolly|away (n=jconnoll@firebug.buglabs.net) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe mike_cw (n=quassel@213.218.221.154) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe mrc3_ (n=ddiaz@189.157.113.233) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe tmbinc_ (i=abcd@83.141.3.59) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe neale (n=neale@proxyout.lanl.gov) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe ynezz (i=ynezz@ibawizard.net) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe mturquette (n=mturquet@adsl-76-249-224-33.dsl.rcsntx.sbcglobal.net) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe akheron (n=akheron@lilja.asteriski.fi) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe Stecchino (n=quassel@amarok/developer/Stecchino) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe Cprossu (n=Administ@ip68-231-17-43.ph.ph.cox.net) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe Ainulindale (n=ainu@calaquendi.org) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe Crofton|work (n=balister@pool-71-171-31-89.nwrknj.east.verizon.net) |
03:30.53 | *** join/#oe CSMan (n=csman@unaffiliated/csman) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe betheg (i=betheg@83.151.29.136) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe Sat_Man (n=satman@83.141.3.41) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe Tartarus (i=trini@pixelshelf.com) [NETSPLIT VICTIM] |
03:30.53 | *** join/#oe pigeon (n=pigeon@eth5284.nsw.adsl.internode.on.net) |
03:30.53 | *** join/#oe univac (n=univac@xmms2/user/univac) |
03:30.54 | *** join/#oe khem (n=khem@99-57-141-118.lightspeed.sntcca.sbcglobal.net) [NETSPLIT VICTIM] |
03:31.31 | *** join/#oe ChanServ (ChanServ@services.) |
03:31.31 | *** join/#oe chii (i=chii@freenode/bot/chii) [NETSPLIT VICTIM] |
03:31.31 | *** mode/#oe [+o ChanServ] by irc.freenode.net |
03:32.14 | *** join/#oe kergoth (n=kergoth@ip24-251-170-95.ph.ph.cox.net) |
03:32.14 | *** join/#oe gt1 (n=geetha@nat/ti/x-3c3e9767081dc299) [NETSPLIT VICTIM] |
03:32.14 | *** join/#oe Kevin` (n=kevin@rrcs-67-52-47-69.west.biz.rr.com) [NETSPLIT VICTIM] |
03:32.14 | *** join/#oe grg (n=grg@eth7090.sa.adsl.internode.on.net) [NETSPLIT VICTIM] |
03:32.14 | *** join/#oe playya (n=playya@unaffiliated/playya) [NETSPLIT VICTIM] |
03:32.14 | *** join/#oe ScriptRipper (n=martin@opensuse/member/MartinMohring) [NETSPLIT VICTIM] |
03:32.14 | *** join/#oe colinbates (n=colin@88-109-34-83.dynamic.dsl.as9105.com) |
03:32.14 | *** join/#oe jic23_ (n=jic23@arcturus.eng.cam.ac.uk) [NETSPLIT VICTIM] |
03:32.14 | *** join/#oe cminyard (n=cminyard@pool-173-57-145-237.dllstx.fios.verizon.net) [NETSPLIT VICTIM] |
03:32.14 | *** join/#oe udovdh (n=udovdh@pindarots.xs4all.nl) [NETSPLIT VICTIM] |
03:32.14 | *** join/#oe Analias (n=analias@c-68-35-8-162.hsd1.nm.comcast.net) [NETSPLIT VICTIM] |
03:32.14 | *** join/#oe blindvt (n=bf@85-127-251-67.dynamic.xdsl-line.inode.at) |
03:32.14 | *** join/#oe tomimo (n=kurre@xdsl-83-150-88-111.nebulazone.fi) |
03:32.14 | *** join/#oe ShadowJK (i=jk@terminus.enivax.net) [NETSPLIT VICTIM] |
03:32.14 | *** join/#oe roopar (n=roopati@nat/ti/x-snvqjillaferawsu) [NETSPLIT VICTIM] |
03:32.14 | *** join/#oe mckoan|away (n=marco@unaffiliated/mckoan) [NETSPLIT VICTIM] |
03:32.14 | *** join/#oe zub (i=[U2FsdGV@linux.fjfi.cvut.cz) [NETSPLIT VICTIM] |
03:32.14 | *** join/#oe Splat1 (n=Splat1@rf1.splat1.com) [NETSPLIT VICTIM] |
03:32.16 | *** join/#oe mpr (n=mpr@aggr.com) |
03:43.54 | *** join/#oe lisppaste7 (n=lisppast@common-lisp.net) |
03:56.25 | *** join/#oe Timelord (n=TL@16.8c.d12c.cidr.airmail.net) |
04:01.17 | khem | kergoth: how are CONFFILES used |
04:01.34 | khem | kergoth: is it similar to debian conffiles |
04:13.46 | kergoth | khem: yep |
04:20.34 | khem | cool |
05:13.34 | *** join/#oe thaytan_ (n=jan@78.16.124.233) |
05:21.31 | *** join/#oe Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh) |
06:10.48 | *** join/#oe sakoman_ (n=sakoman@mdb0f36d0.tmodns.net) |
06:13.20 | *** part/#oe amitshah1 (n=amit@utdpat242007.utdallas.edu) |
06:16.22 | CIA-2 | 03Martin Jansa <Martin.Jansa@gmail.com> 07shr/merge * r824a1cb1cc 10openembedded.git/recipes/ (gypsy/gypsy.inc navit/navit.inc): navit: fix depends |
06:23.08 | *** join/#oe zecke (n=ich@123-192-145-111.dynamic.kbronet.com.tw) |
06:46.35 | *** join/#oe spaetz (n=spaetz@mtec-hg-docking-1-dhcp-199.ethz.ch) |
06:49.28 | *** join/#oe bswix (n=rode@147.84-49-231.nextgentel.com) |
07:00.59 | *** join/#oe Weaselweb (n=quassel@2001:6f8:9e4:123:21a:92ff:fe5a:1409) |
07:09.06 | *** join/#oe xjqian (n=gordon@68-184-201-0.dhcp.stls.mo.charter.com) |
07:17.15 | *** join/#oe recalcati_ (i=51485a51@gateway/web/freenode/x-be4d0ee0869daefe) |
07:18.45 | *** join/#oe Jay7 (n=jay@93-81-136-41.broadband.corbina.ru) |
07:20.21 | *** join/#oe sgh (n=quassel@cpe.ge-0-2-0-950.faaqnqu1.customer.tele.dk) |
07:24.54 | CIA-2 | 03Sebastian Spaeth <Sebastian@SSpaeth.de> 07org.openembedded.dev * rb084808fca 10openembedded.git/ (conf/checksums.ini recipes/vala/vala_0.7.8.bb): |
07:24.54 | CIA-2 | vala: add version 0.7.8 and checksums |
07:24.54 | CIA-2 | Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de> |
07:26.06 | *** join/#oe thebohemian (n=rschus@p5DDC612B.dip.t-dialin.net) |
07:26.21 | CIA-2 | 03Sebastian Spaeth <Sebastian@SSpaeth.de> 07shr/merge * r3da5e2c22c 10openembedded.git/ (conf/checksums.ini recipes/vala/vala_0.7.8.bb): |
07:26.21 | CIA-2 | vala: add version 0.7.8 and checksums |
07:26.21 | CIA-2 | Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de> |
07:29.09 | *** join/#oe xjqian (n=gordon@mir-nil-pat-118-150.wustl.edu) |
07:33.43 | CIA-2 | 03Sebastian Spaeth <Sebastian@SSpaeth.de> 07shr/merge * r80ccb1c805 10openembedded.git/recipes/vala/vala-native_0.7.8.bb: |
07:33.43 | CIA-2 | vala-native: add 0.7.8 |
07:33.43 | CIA-2 | Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de> |
07:34.46 | CIA-2 | 03Sebastian Spaeth <Sebastian@SSpaeth.de> 07org.openembedded.dev * rce66333fb4 10openembedded.git/recipes/vala/vala-native_0.7.8.bb: |
07:34.46 | CIA-2 | vala-native: add 0.7.8 |
07:34.46 | CIA-2 | Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de> |
07:40.28 | mckoan | good morning |
07:44.20 | *** join/#oe aloisiojr (n=aloisio@a91-155-177-209.elisa-laajakaista.fi) |
07:47.29 | *** join/#oe kristoffer (n=kristoff@95.209.137.26.bredband.tre.se) |
07:55.24 | recalcati_ | mckoan: good morning |
07:59.28 | *** join/#oe Longfield (n=valentin@lsa1pc7.epfl.ch) |
08:04.47 | mckoan | hi recalcati_ |
08:10.17 | *** join/#oe eFfeM (n=frans@j192117.upc-j.chello.nl) |
08:11.52 | CIA-2 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * rcbda7eff82 10openembedded.git/recipes/mplayer/mplayer_svn.bb: angstrom: raise default pref in mplayer recipe as well |
08:14.21 | *** join/#oe NvrBst (n=nb@66.183.106.176) |
08:17.08 | *** join/#oe cyberdeck (n=cyberdec@iss66.vlsi.informatik.tu-darmstadt.de) |
08:22.54 | CIA-2 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * r6d51f2acd4 10openembedded.git/conf/checksums.ini: checksums: sort and add missing checksum |
08:22.55 | CIA-2 | 03Martin Jansa <Martin.Jansa@gmail.com> 07shr/merge * r26d5a16ea7 10openembedded.git/: Merge branch 'shr/merge' of git.openembedded.org:openembedded into shr/merge |
08:22.56 | CIA-2 | 03Martin Jansa <Martin.Jansa@gmail.com> 07shr/merge * r5855f30d42 10openembedded.git/ (conf/checksums.ini recipes/tangogps/tangogps_0.9.8.bb): |
08:22.56 | CIA-2 | tangogps: add 0.9.9 bugfix release, drop 0.9.8 |
08:22.58 | CIA-2 | Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> |
08:33.19 | *** join/#oe ZaPPaS (n=moritz@weinberg.pi5.physik.uni-stuttgart.de) |
08:45.15 | *** join/#oe lrg (n=lrg@slimlogic.co.uk) |
08:49.07 | *** join/#oe Sleep_Walker (n=Sleep@193.179.96.131) |
08:53.30 | recalcati_ | DISTRO_PR has changed (.3 to .4) : I have to rebuild all. |
08:59.21 | zecke | recalcati_: yeah, there was a change that will impact all packages |
09:00.44 | recalcati_ | zecke: I know it was important, just to complain .. |
09:01.03 | zecke | recalcati_: |
09:01.11 | zecke | recalcati_: complain about what? |
09:01.37 | *** join/#oe pvanhoof (n=pvanhoof@d54C0C0BA.access.telenet.be) |
09:03.46 | *** join/#oe Pr0t0N (n=lcintrat@fe2adsl-2.wyplay.net) |
09:04.18 | *** join/#oe john3909 (n=jsynesio@99-26-125-126.lightspeed.sndgca.sbcglobal.net) |
09:05.55 | *** join/#oe Heinervdm (n=thomas@pD9E1633E.dip.t-dialin.net) |
09:08.43 | eFfeM | recalcati_: this happened almost a week ago and was announced on the mailing list (maybe not the oe one, maybe the angstrom one) |
09:09.38 | recalcati_ | eFfeM: it's good. I now that there are many think. Also there was eabi changing before . no pb . |
09:09.45 | recalcati_ | eFfeM: it's good. I now that there are many things. Also there was eabi changing before . no pb . |
09:09.50 | zecke | eFfeM: and the actual change was developed on the OE ml... I love how people that only take complain |
09:10.37 | recalcati_ | I have many setups. I don't have to discourage!!! |
09:10.50 | *** join/#oe archae0pteryx (n=snewman@207.47.42.130.static.nextweb.net) |
09:12.34 | *** join/#oe daal (n=daal@110.23.37.67) |
09:13.46 | hrw | morning |
09:15.49 | hrw | I just bumped ABI in tmp/ files |
09:23.14 | XorA|gone | god some people just dont know when to stop sending emails |
09:25.58 | CIA-2 | 03Klaus Kurzmann <mok@fluxnetz.de> 07shr/merge * rd3e271f9dc 10openembedded.git/ (3 files in 2 dirs): |
09:25.58 | CIA-2 | linux-openmoko.inc: move autoload of sound modules to the appropriate machine config |
09:25.58 | CIA-2 | Signed-off-by: Klaus Kurzmann <mok@fluxnetz.de> |
09:26.32 | Jay7 | btw |
09:26.42 | Jay7 | http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/zaurus-devel |
09:26.47 | hrw | fsck.. |
09:26.49 | eFfeM | hm, anyone an idea how automake gets its defaults for cross test? somehow for mysql5 stack_direction has no value whereas it has for mysql4. apparently I'm lost in automake hell |
09:26.59 | Jay7 | ML for zaurus development coordination :) |
09:26.59 | hrw | how to tell update-rc.d to apped not to $PN package? |
09:27.34 | hrw | eFfeM: last argument was for cross? |
09:28.03 | Jay7 | eFfeM: you can look into patches for fvwm recipe |
09:28.13 | XorA|gone | hrw: yeah I noticed you broke transmission packages :-D |
09:28.20 | hrw | XorA|gone: yep ;( |
09:28.27 | Jay7 | there I've fixed some cross-awareness |
09:28.39 | hrw | XorA|gone: thinking about doing s/PN-daemon/PN and s/PN/PN-gui/ |
09:28.47 | eFfeM | hrw, don't understand your comment, Jay7 will do (actually looked at the mysql files but didn't find there but there is a big change between 4 and 5) |
09:28.54 | XorA|gone | hrw: I was just going to say that |
09:29.00 | XorA|gone | hrw: we think alike |
09:30.10 | Jay7 | eFfeM: recipes/fvwm/files/upstream-configure.ac.patch |
09:30.13 | hrw | XorA: I have to say that transmission web is nice |
09:30.15 | XorA | eFfeM: autoconf isnt that bad |
09:30.25 | hrw | XorA: lacks some things but usable |
09:30.28 | XorA | eFfeM: pretty easy to work out how the tests work |
09:30.39 | hrw | XorA: can you share your settings for transmission? |
09:30.59 | XorA | hrw: I use the defaults |
09:31.02 | eFfeM | XorA: never got to understand autoconf, sorry, maybe need to spend some time in it |
09:31.05 | XorA | hrw: apart from whitelist |
09:31.27 | Jay7 | I'm using transmission-daemon + remote + web + qt gui at home :) |
09:31.29 | eFfeM | Jay7: you lost me, my recipes dir does not have a fwm subdir (puzzled?) |
09:31.30 | Jay7 | but on x86 |
09:31.57 | eFfeM | an i am at yesterdays head |
09:32.15 | eFfeM | Jay7: are you on a branch ? |
09:32.45 | Jay7 | eFfeM: in that patch I've fixed test results for cross-compiling |
09:33.01 | Jay7 | but may be I've musunderstand your first question.. |
09:33.29 | eFfeM | Jay7: i don't even have a recipes/fwm dir ! |
09:33.39 | eFfeM | would love to have a look at your patch |
09:33.46 | Jay7 | eFfeM: hm.. it should be in oe.dev |
09:33.54 | zecke | earthquake |
09:33.59 | eFfeM | cd recipes; ls | wc gives 1989, ls fwm gives not found |
09:34.09 | Jay7 | f v w m :) |
09:34.10 | CIA-2 | 03Robert P. J. Day <rpjday@crashcourse.ca> 07org.openembedded.dev * r810df5f14c 10openembedded.git/docs/usermanual/chapters/introduction.xml: |
09:34.10 | CIA-2 | usermanual: Aesthetic fix in chapter 1. |
09:34.10 | CIA-2 | A simple tidy of a comma-separated list in Chapter 1. |
09:34.10 | CIA-2 | Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> |
09:34.10 | CIA-2 | Acked-by: Holger Hans Peter Freyther <zecke@selfish.org> |
09:34.12 | CIA-2 | 03Robert P. J. Day <rpjday@crashcourse.ca> 07org.openembedded.dev * raa6bc11505 10openembedded.git/docs/usermanual/chapters/getting_oe.xml: (log message trimmed) |
09:34.15 | eFfeM | oopks 1898 |
09:34.16 | CIA-2 | User manual typoes and aesthetics, chapter 2 only. |
09:34.18 | CIA-2 | Some minor cleanups for Chapter 2 of the User Manual: |
09:34.20 | CIA-2 | * add some DocBook tags for filenames |
09:34.22 | CIA-2 | * update BitBake version to 1.8.16 |
09:34.24 | CIA-2 | * add missing space after "wget" command |
09:34.26 | CIA-2 | * correct misspelled "local/conf" to "local.conf" |
09:34.28 | CIA-2 | 03Robert P. J. Day <rpjday@crashcourse.ca> 07org.openembedded.dev * rf2b43d21cf 10openembedded.git/docs/usermanual/chapters/getting_oe.xml: (log message trimmed) |
09:34.31 | CIA-2 | User Manual: Warn readers about mmap and SELinux issue. |
09:34.33 | CIA-2 | On some Linux distros, if you set the kernel /proc file |
09:34.35 | CIA-2 | /proc/sys/vm/mmap_min_addr to zero, you will probably get an SELinux |
09:34.36 | zecke | wow that was a long one |
09:34.37 | CIA-2 | violation if you're running SELinux in enforcing mode. Explain to the |
09:34.39 | CIA-2 | reader how to get around that. |
09:34.41 | CIA-2 | Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> |
09:35.40 | CIA-2 | 03Sebastian Spaeth <Sebastian@SSpaeth.de> 07org.openembedded.dev * r56b84b4f4c 10openembedded.git/recipes/vala/ (vala-native_0.7.8.bb vala_0.7.8.bb): |
09:35.40 | CIA-2 | vala vala-native: Make use of GNOME_MIRROR in SRC_URI |
09:35.40 | CIA-2 | Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de> |
09:35.51 | CIA-2 | 03Sebastian Spaeth <Sebastian@SSpaeth.de> 07org.openembedded.dev * ra3ee457e82 10openembedded.git/: Merge branch 'org.openembedded.dev' of git+ssh://git@git.openembedded.net/openembedded into org.openembedded.dev |
09:36.12 | eFfeM | Jay7: oops sorry just found out after browsing the git tree on the web |
09:36.16 | Jay7 | http://cgit.openembedded.net/cgit.cgi/openembedded/tree/recipes/fvwm/files/upstream-configure.ac.patch |
09:36.18 | Jay7 | here :) |
09:36.42 | Jay7 | time to eat something.. |
09:36.45 | Jay7 | afk |
09:37.25 | eFfeM | Jay7 enjoy :-) |
09:41.23 | XorA | hrw: are you going to make that name change for transmission? I think thats the best option shortterm |
09:42.06 | hrw | yes |
09:42.54 | hrw | fixing it now |
09:43.15 | MWelchUK_work__ | Hi Guys. A little while back I think we decided that ccache was no longer a requirement (in fact it was causing random compile problems). Shall I remove the remaining mentions of it from the wiki on http://wiki.openembedded.net/index.php/Required_software & http://wiki.openembedded.net/index.php/Getting_started ? |
09:55.08 | hrw | ~hail commit --amend |
09:55.08 | ibot | ACTION bows down to commit --amend and chants, "I'M NOT WORTHY!!" |
09:55.44 | CIA-2 | 03Marcin Juszkiewicz <marcin@juszkiewicz.com.pl> 07org.openembedded.dev * r7f845d2618 10openembedded.git/recipes/transmission/transmission.inc: |
09:55.44 | CIA-2 | transmission: fix breakage of "r3" version - GUI in PN-gui, daemon in PN |
09:55.44 | CIA-2 | update-rc.d.bbclass adds only to PN package so I moved PN-daemon into PN |
09:55.44 | CIA-2 | and PN became PN-gui now |
09:56.47 | *** join/#oe tasslehoff (n=Mich@147.84-49-231.nextgentel.com) |
09:58.07 | pb___ | MWelchUK_work__: yes, go ahead |
09:58.39 | hrw | brb |
09:59.31 | *** join/#oe hrw (n=hrw@chello089078170228.chello.pl) |
10:01.38 | CIA-2 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * rac8425fce9 10openembedded.git/recipes/squashfs-tools/ (squashfs-tools-native_4.0.bb squashfs-tools_4.0.bb): squashfs-tools: fix up native version |
10:03.21 | *** join/#oe benlau2 (n=benlau@221.125.8.45) |
10:06.13 | *** join/#oe likewise (n=chatzill@82-171-51-231.ip.telfort.nl) |
10:07.08 | *** join/#oe zoff99 (i=chatzill@chello080109110037.13.15.vie.surfer.at) |
10:07.41 | MWelchUK_work__ | pb__, I've left the mention on http://wiki.openembedded.net/index.php/Getting_started as it's mentioning a partial work around if it is installed. I've extended the text to suggest it should be uninstalled. |
10:08.14 | *** join/#oe jest (n=jest@150.254.31.31) |
10:08.45 | *** join/#oe rob_w (n=bob@217.237.177.190) |
10:10.01 | *** join/#oe sgh (n=quassel@cpe.ge-0-2-0-950.faaqnqu1.customer.tele.dk) |
10:10.11 | jest | I sent patch to oe-devel list a few days ago. I don't know customs there, shall I ask for ack and commit to repo directly? |
10:10.28 | zecke | jest: got a patchwork URL? |
10:10.51 | jest | http://patchwork.openembedded.org/patch/1192/ |
10:11.59 | jest | this applicable to both dev and stable branches |
10:12.32 | zecke | jest: oh boy... boost... atomic operations |
10:12.39 | jest | yeah :) |
10:13.11 | zecke | do you have any idea why atomic_count_gcc_atomicity.patch is only applied in 1.33.1? |
10:13.12 | jest | zecke: this is a patch resulting from reading sources of newer version of Boost |
10:13.25 | jest | zecke: no |
10:13.42 | jest | zecke: I can try if any other version compiles without it for ARM |
10:14.11 | zecke | jest: can I ask you to find that out? if you do that within the next ~3 hours I can land your patch (otherwise I'm off to bed) |
10:14.23 | jest | sure, I'll take a look |
10:14.52 | *** join/#oe florian_kc (n=fuchs@Maemo/community/contributor/florian) |
10:18.40 | *** join/#oe bswix (n=rode@147.84-49-231.nextgentel.com) |
10:19.05 | likewise | ola all |
10:19.32 | likewise | df |
10:20.51 | tasslehoff | In my custom Angstrom, I want an empty /upgrade folder created in my rootfs. Is there a recipe / script that I could use for this? |
10:21.19 | XorA | tasslehoff: you could define a rootds post process command |
10:21.24 | jest | zecke: I'll find out that it depends on GCC version |
10:21.27 | *** join/#oe thaytan_ (n=jan@62.231.57.248) |
10:22.25 | jest | zecke: for GCC < 4.2 it should be bits/atomicity.h (just as is), for GCC >= 4.2 ext/atomicity.h should be used |
10:22.56 | jest | zecke: I think I should correct the patch, just copying the code from boost 1.40 |
10:23.27 | jest | zecke: how can I do that with git? |
10:27.06 | tasslehoff | XorA: sounds like what I want. any such processes defined already that I can "learn from"? |
10:27.22 | XorA | tasslehoff: I think in angstrom.conf |
10:28.55 | *** join/#oe raster (n=raster@enlightenment/developer/raster) |
10:31.57 | zecke | jest: copying or what? |
10:32.01 | tasslehoff | XorA: can't find it, but then I don't understand much of that file yet :) |
10:32.31 | *** join/#oe cbrake_away (n=cbrake@oh-69-34-21-229.sta.embarqhsd.net) |
10:32.37 | jest | zecke: shall I just post another patch, or relate the new one with the old one (somehow)? |
10:32.40 | *** join/#oe thaytan (n=jan@nat/sun/x-b823fc2ba7228044) |
10:34.01 | zecke | jest: fixing all boost versions in one go would be great |
10:34.20 | florian | good morning |
10:34.55 | jest | zecke: I have no possibility to check, but it's just '#if __GCC__' stuff, so should work |
10:35.27 | zecke | jest: why? you could do bitbake -b boost_version.bb (just compile them... or is this header file not used during compile?) |
10:36.00 | DJWillis | tasslehoff: http://pastebin.com/dcca9723 should give you an idea (it's how I generate a version file for images I build for the Pandora) |
10:36.31 | jest | zecke: the problem is it's a header file and should be included somewhere. I'll try |
10:37.49 | DJWillis | tasslehoff: ROOTFS_POSTPROCESS_COMMAND += "mkdir ${IMAGE_ROOTFS}/upgrade" should do it to be honest, add that to your image file. Not checked that will work but it should. |
10:38.38 | CIA-2 | 03Martin Jansa <Martin.Jansa@gmail.com> 07shr/merge * r6c1ed757c1 10openembedded.git/recipes/update-alternatives/ (3 files in 2 dirs): |
10:38.38 | CIA-2 | update-alternatives-cworth: if there is more alternatives with same preference use latest |
10:38.38 | CIA-2 | Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> |
10:38.48 | CIA-2 | 03Martin Jansa <Martin.Jansa@gmail.com> 07shr/merge * rd20ff32699 10openembedded.git/: Merge branch 'shr/merge' of git.openembedded.org:openembedded into shr/merge |
10:39.41 | *** join/#oe radhermit (n=radhermi@c-67-169-210-177.hsd1.or.comcast.net) |
10:45.31 | CIA-2 | 03Martin Jansa <Martin.Jansa@gmail.com> 07shr/merge * r791907dd12 10openembedded.git/recipes/tasks/task-shr-feed.bb: |
10:45.31 | CIA-2 | task-shr-feed: remove some unneeded apps |
10:45.31 | CIA-2 | Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> |
10:46.50 | pb__ | florian: good morning |
10:46.56 | pb__ | zecke: good afternoon |
10:47.30 | zecke | pb__: hey! |
10:55.38 | *** join/#oe mario-goulart (n=user@67.205.85.241) |
10:57.44 | rwhitby | Is anyone actively building OE on MacOSX? I've found Koen's darwin-fixes branch, but there's no commits in it since March ... |
10:58.23 | pb__ | I think kergoth is/was working on OS X. |
10:59.57 | RP | morning all |
11:00.46 | pb__ | hi rp |
11:02.24 | *** join/#oe greyback (n=greyback@ip-83-147-165-234.dub-3rk1.metro.digiweb.ie) |
11:04.29 | tasslehoff | DJWillis: thanks. (late reply because of lunch) |
11:09.14 | *** join/#oe Laibsch (n=Laibsch@p4211-ipbf1401marunouchi.tokyo.ocn.ne.jp) |
11:12.23 | *** join/#oe mickey|office (n=M@dialbs-092-079-168-007.static.arcor-ip.net) |
11:15.17 | *** join/#oe marcosmamorim (n=marcos@bd210299.virtua.com.br) |
11:21.23 | *** join/#oe Sleep_Walker (n=Sleep@nat/novell/x-118ace4f1673bc00) |
11:21.36 | *** join/#oe pirho (i=pirho@gateway/gpg-tor/key-0x2CEEC9CB) |
11:27.52 | *** join/#oe fraxinath (n=quassel@p4FD64FCB.dip.t-dialin.net) |
11:33.16 | mike_cw | anyone got any tips for getting icecc working? at the moment the helper machines don't seem to be doing any work, although iceccd on those machine uses up a few % CPU when a build is in progress elsewhere |
11:33.59 | tasslehoff | DJWillis: worked like a charm |
11:34.30 | CIA-2 | 03Martin Jansa <Martin.Jansa@gmail.com> 07shr/merge * r565f3559ef 10openembedded.git/conf/distro/shr.conf: |
11:34.30 | CIA-2 | shr: few more preferred providers for task-shr-feed, add testlab |
11:34.30 | CIA-2 | Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> |
11:43.24 | *** join/#oe ao2 (n=u@2001:1418:117:0:0:0:0:1) |
11:44.37 | *** join/#oe alecrim (n=alecrim@189.2.128.130) |
11:50.08 | *** join/#oe alecrim (n=alecrim@189.2.128.130) |
11:52.04 | cdbot2 | * * OE Bug 5332 has been created by ospite(AT)studenti.unina.it |
11:52.06 | cdbot2 | * * building ncurses triggers an internal compiler error |
11:52.08 | cdbot2 | * * http://bugs.openembedded.org/show_bug.cgi?id=5332 |
11:52.56 | *** join/#oe Laibsch (n=Laibsch@p4211-ipbf1401marunouchi.tokyo.ocn.ne.jp) |
11:56.05 | *** join/#oe aloisiojr1 (n=aloisio@a91-155-177-209.elisa-laajakaista.fi) |
12:05.46 | eFfeM | hm, doing something stupid again or don't understand things: |
12:05.54 | eFfeM | my msql5 recipe contains a line: FILES_${PN}-leftovers = "/" |
12:06.28 | eFfeM | i get a QA issue on /work/armv7a-angstrom-linux-gnueabi/mysql5-5.1.40-r0/install/mysql5-leftovers/usr/lib/plugin/.debug/ha_innodb_plugin.so.0.0.0 |
12:06.35 | eFfeM | whiich is understandable |
12:07.05 | eFfeM | added FILES_${PN}-leftovers-dbg = "${libdir}/plugin/.debug/" |
12:07.05 | eFfeM | <PROTECTED> |
12:07.16 | eFfeM | what am I doing wrong here???? |
12:07.23 | zecke | eFfeM: add an '*' to the end |
12:07.29 | eFfeM | ah ok |
12:08.03 | eFfeM | as the leftovers package contained only a dir , thought that would be ok |
12:08.10 | pb__ | yeah, I think that should be ok without the * |
12:08.15 | pb__ | what is the value of ${PACKAGES}? |
12:09.04 | eFfeM | zecke, pb__ with * does not matter |
12:09.18 | eFfeM | packages contains ${PN}-leftovers not the -dbg |
12:09.23 | eFfeM | should that be there too ? |
12:09.26 | pb__ | yes |
12:09.34 | pb__ | and, it needs to be before ${PN}-leftovers |
12:10.00 | pb__ | mickey|office: good morning |
12:10.02 | eFfeM | ah ok |
12:11.00 | CIA-2 | 03Thomas Zimmermann <zimmermann@vdm-design.de> 07shr/merge * r9d555403fe 10openembedded.git/recipes/xorg-lib/ (libxext-native_1.1.1.bb libxfont-native_1.4.1.bb): |
12:11.00 | CIA-2 | libx*-native: fix PROVIDES for some packages |
12:11.00 | CIA-2 | Signed-off-by: Klaus Kurzmann <mok@fluxnetz.de> |
12:11.02 | CIA-2 | 03Thomas Zimmermann <zimmermann@vdm-design.de> 07shr/merge * rd589342d65 10openembedded.git/recipes/matchbox2/matchbox-panel-2_svn.bb: |
12:11.02 | CIA-2 | matchbox-panel-2: add -Wno-error to TARGET_CFLAGS to build with gcc 4.4 |
12:11.04 | CIA-2 | Signed-off-by: Klaus Kurzmann <mok@fluxnetz.de> |
12:11.06 | CIA-2 | 03Thomas Zimmermann <zimmermann@vdm-design.de> 07shr/merge * r08d79665e9 10openembedded.git/recipes/tasks/task-shr-minimal.bb: |
12:11.09 | CIA-2 | task-shr-minimal: include matchbox-keyboard-im again in task-shr-minimal-gtk |
12:11.11 | CIA-2 | Signed-off-by: Klaus Kurzmann <mok@fluxnetz.de> |
12:11.18 | zecke | hmm meta-toolchain is broken in more ways :( |
12:11.32 | pb__ | oh dear |
12:11.35 | pb__ | what's wrong with it? |
12:11.57 | zecke | pb__: the libtool-cross-sdk (or such package) stopped installing config.guess install-sh... |
12:12.05 | zecke | so an autoreconf --install is failing |
12:12.21 | pb__ | drat |
12:16.28 | eFfeM | pb__, thanks that worked |
12:16.36 | eFfeM | one issue left: what is the policy to resolve |
12:16.38 | eFfeM | NOTE: Multiple libraries (libmysqlclient.so.16, libmysqlclient_r.so.16) found and LEAD_SONAME not defined |
12:17.03 | pb__ | put those two in separate packages |
12:17.05 | *** join/#oe alecrim (n=alecrim@189.2.128.130) |
12:17.52 | eFfeM | ok, mysql4 did nod seem to have this |
12:18.40 | pb__ | possibly mysql4 didn't ship both those libraries |
12:20.06 | *** join/#oe alecrim (n=alecrim@189.2.128.130) |
12:21.01 | CIA-2 | 03Klaus Kurzmann <mok@fluxnetz.de> 07shr/merge * r8f88d5e6e1 10openembedded.git/recipes/tasks/task-shr-minimal.bb: |
12:21.01 | CIA-2 | task-shr-minimal.bb: remove notifier and libframeworkd-phonegui-efl |
12:21.01 | CIA-2 | Signed-off-by: Klaus Kurzmann <mok@fluxnetz.de> |
12:21.41 | mickey|office | morning pb__ |
12:23.42 | jest | zecke: I checked my patch on 1.33 and it works |
12:24.00 | jest | zecke: on boost 1.34 it is not applicable |
12:24.56 | *** join/#oe otavio (n=otavio@debian/developer/otavio) |
12:32.56 | *** join/#oe th1_ (n=th@cpc1-cmbg15-2-0-cust361.5-4.cable.virginmedia.com) |
12:33.58 | th1_ | if I have a recipe that has 2 git repos in SRC_URI how can I specify a different SRCREV for each? |
12:34.03 | *** join/#oe vo5 (n=vo@bd210299.virtua.com.br) |
12:35.28 | jic23_ | hrw: You about |
12:35.31 | jic23_ | ? |
12:35.53 | jic23_ | Was just wanting to check wrt email that by vendor page you mean on the wiki? (or is there some other list?) |
12:44.04 | *** join/#oe timtimred (n=meh@79-75-151-48.dynamic.dsl.as9105.com) |
12:46.38 | pb__ | th1_: I don't think you can. |
12:46.59 | pb__ | in that kind of situation I don't think SRCREV really works. |
12:49.12 | tasslehoff | I'm trying to keep my own application outside the OE tree. I have a myimage.bb that picks modules from oe/recipes and myown/recipes. It works well, but how can I make my applications and scripts start automatically? Could I have a myown/recipe/startup.bb that has a script that starts all my stuff, put that in some magic directory where it will automatically be started? |
12:49.35 | *** join/#oe ant_work (n=andrea@host214-85-static.34-85-b.business.telecomitalia.it) |
12:51.06 | CIA-2 | 03Robert Nelson <robert.nelson@digikey.com> 07org.openembedded.dev * r6f0e47264d 10openembedded.git/recipes/linux/ (2 files in 2 dirs): linux-omap 2.6.29: fix FIFO issues with large transfers on the MUSB controller |
12:51.10 | CIA-2 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * rf389ecae02 10openembedded.git/ (3 files in 2 dirs): linux-omap-pm 2.6.29: cleanup some touchbook stuff |
12:51.20 | CIA-2 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * r2b0e95fd5d 10openembedded.git/recipes/gnome/ (gdm-2.28.0/gdm gdm_2.28.0.bb): gdm: tweak initscript and add grep to depends since busybox grep doesn't do -w |
12:53.00 | pb__ | tasslehoff: yes, you can put anything you like in /etc/init.d |
12:53.04 | pb__ | that will do what you want for most distros |
12:55.58 | hrw | jic23_: in machine config I mean |
12:56.02 | tasslehoff | pb__: that simple? great :). how can I control when it runs? I think I want it to run as the last initscript. |
13:03.03 | pb__ | more or less that simple, yes. the actual running is controlled by the symlinks in /etc/rcN.d, which are usually managed by update-rc.d. |
13:03.26 | pb__ | in straightforward cases, you can use update-rc.d.bbclass to take care of all that stuff for you. |
13:04.18 | *** join/#oe dos1 (n=dos@unaffiliated/dos1) |
13:04.22 | pb__ | to make it be the last thing started, you can set INITSCRIPT_PARAMS = "default 99" |
13:04.27 | pb__ | er, "defaults 99" |
13:05.14 | tasslehoff | pb__: I think I have a straightforward case on my hands :) |
13:07.21 | jic23_ | hrw: Ah. Fair point. |
13:08.22 | *** join/#oe rob_w (n=bob@217.237.177.190) |
13:13.01 | mckoan | pb__: about oedem, AFAYK there is a meeting somewhere in Cam to go at the Red Lion? |
13:13.31 | CIA-2 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * r12c4514ab0 10openembedded.git/recipes/gnome/ (gdm-2.28.0/gdm gdm_2.28.0.bb): gdm: add tcp-wrappers to DEPENDS, fix typo in initscript |
13:19.20 | th1_ | pb__, any other way I can get a similar effect? |
13:20.12 | *** join/#oe thebohemian (n=rschus@p5DDC5972.dip.t-dialin.net) |
13:22.43 | CIA-2 | 03Thomas Zimmermann <zimmermann@vdm-design.de> 07shr/merge * r5c2aac7c18 10openembedded.git/recipes/e17/elmdentica_svn.bb: |
13:22.43 | CIA-2 | elmdentica: add inherit pkgconfig and some cleanup |
13:22.43 | CIA-2 | Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> |
13:23.26 | tasslehoff | pb__: this simple? : http://pastebin.com/d457637f5 |
13:25.56 | pb__ | th1_: what exactly is the effect you're trying to achieve? |
13:26.07 | pb__ | tasslehoff: yep, that should do it |
13:26.36 | pb__ | oh, might need to arrange to install mystartup into /etc/init.d; I don't remember whether update-rc.d.bbclass will do that for you. |
13:26.40 | pb__ | probably not I guess |
13:28.13 | tasslehoff | pb__: I had that at first, but it gave an error so I just removed it :) I'll try again if it's missing |
13:33.37 | th1_ | pb__, I have a package that is built from two local git repositories, and I need to specify the revision ID for both the repositories so I can be sure I have a consistent build (and can update the recipe with "known-working" combinations) |
13:33.56 | pb__ | th1_: if all you need is to specify the revision IDs in your recipe, you can do that directly in the URLs. |
13:34.13 | th1_ | so omit SRCREV altogether? |
13:34.17 | pb__ | right |
13:35.09 | *** join/#oe noglitch (n=Miranda@mail.atmel.fr) |
13:36.15 | *** join/#oe chouimat (n=quassel@CPE002129b5a060-CM0011e6c40c15.cpe.net.cable.rogers.com) |
13:37.18 | th1_ | pb__, how do I specify the revision ID in the URL? ;) |
13:38.03 | pb__ | git:///;tag=012345 I think |
13:38.43 | ant_work | yes, embed branch and tag |
13:38.49 | ant_work | hi pb__ |
13:38.52 | pb__ | or might be "rev=" not "tag=" |
13:38.56 | ant_work | ready for heavy weekend? |
13:38.59 | pb__ | I'm not sure if git distinguishes them |
13:39.01 | pb__ | hi ant_work |
13:39.22 | pb__ | yeah, more or less ready |
13:39.58 | th1_ | pb__, from looking at git.py it looks like it must be tag but I don't quite understand that file.. |
13:40.06 | pb__ | th1_: see also the fine manual: http://bitbake.berlios.de/manual/ch03s07.html |
13:40.45 | th1_ | pb__, yes I've seen that but it doesn't have a REV only tags and branch .. anyway I'll try to put the ID in tag and see if it worsk |
13:41.33 | pb__ | th1_: I don't think git makes any distinction between tags and revs at that level. |
13:41.40 | zecke | jest: I commented on your GNU_HASH fix. When touching a .inc file you will need to bump the PR on every of its users |
13:42.01 | jest | zecke: I did |
13:42.05 | zecke | jest: in the last year we have done something like FILE_PR/INC_PR you could convert the boost recipes to that |
13:42.12 | pb__ | th1_: I guess patches for the manual are welcome :-) |
13:42.13 | zecke | jest: the .inc is only used by 1.33.1.bb? |
13:42.17 | jest | yes |
13:42.46 | jest | zecke: 1.34 has everything "embedded", 1.36 uses another .inc |
13:42.54 | th1_ | pb__, after we make the switch there'll be lots of patches hopefully :) |
13:42.55 | ant_work | pb__: I'd ike to debug a non-booting kernel and was thinking about have early output. I found this new patch |
13:42.57 | ant_work | http://lists.infradead.org/pipermail/linux-arm-kernel/2009-November/003452.html |
13:43.03 | th1_ | so far it's a struggle because I'm the only one maintaining the OE stuff |
13:43.15 | ant_work | wuestion: does it work on framebuffer? |
13:43.26 | ant_work | *question |
13:43.31 | ant_work | (damned qwerty) |
13:43.35 | pb__ | ant_work: no |
13:43.39 | pb__ | that would be for serial only |
13:43.41 | zecke | jest: oh, e.g. writing this in the commit message would be good :) |
13:43.48 | ant_work | ah, ok, still fine |
13:44.10 | *** join/#oe Gnutoo (n=gnutoo@host87-147-dynamic.44-79-r.retail.telecomitalia.it) |
13:44.21 | pb__ | the kernel isn't in control of the framebuffer at the point where that runs. |
13:44.33 | jest | zecke: in fact, I'd vote for deprecation policy in this case... :) |
13:44.35 | ant_work | yep, even console is not there yet..silly question |
13:44.37 | pb__ | obviously you could move the fb initialisation earlier, but that starts to defeat the object of the "early" printk |
13:44.48 | zecke | jest: deprecation as in throwing this file out? |
13:44.49 | ant_work | atm I have no output on serial |
13:45.06 | pb__ | since, obviously, the more code that you have to move to the "early" stage, the greater the chance that one of those things will be what is causing your crash |
13:45.09 | ant_work | I have doubt about the decompression |
13:45.31 | ant_work | I don't even see 'Uncompressing...' |
13:45.44 | pb__ | ah, that doesn't sound good |
13:45.54 | ant_work | wait, this only booting from nand |
13:45.57 | ant_work | he |
13:46.04 | ant_work | all fine from SD |
13:46.09 | ant_work | (kexec) |
13:46.10 | jest | zecke: more or less. In cases where nobody uses old versions, as newer ones are better. But it is a matter of attitude and kind of philosophical. |
13:46.12 | *** join/#oe cyberdeck (n=cyberdec@iss66.vlsi.informatik.tu-darmstadt.de) |
13:46.50 | ant_work | pb__: anyway that 'Uncompressing..' msg comes *after* console is up |
13:47.07 | ant_work | or? |
13:47.23 | th1_ | pb __: nope, it doesn't work: fatal: Couldn't find remote ref 04087d7838830880a5bc52207b13bf22d6a8bfa2 |
13:47.33 | th1_ | so it has to be a tag there apparently :( |
13:47.34 | pb__ | ant_work: no, before |
13:47.50 | ant_work | ah, is logged and displayed later |
13:48.12 | ant_work | how could it go to serial without console? |
13:48.13 | *** join/#oe Weaselweb_ (n=quassel@77-64-160-64.dynamic.primacom.net) |
13:48.19 | pb__ | no, that particular message is displayed by special code in the first stage bootstrap |
13:48.25 | ant_work | I see |
13:48.29 | pb__ | see arch/arm/boot/compressed/head.S |
13:48.48 | pb__ | this is completely separate to the "real" kernel, which can't be running at that point since it hasn't been uncompressed yet |
13:49.04 | ant_work | is a bit like that earlyprintk patch |
13:49.09 | ant_work | extra |
13:49.13 | pb__ | th1_: ah, that is a shame. I guess you should look at what git command the fetcher is running and compare that to what you are trying to get it to do. |
13:49.35 | jest | zecke: Considering commit style: I can excuse myself by watching others patches' commits -- sometimes they are really sparse :) |
13:49.48 | th1_ | pb__, yes that's what I'm doing but it's using git commands I wouldn't normally use so taking me a bit of time to figure out :) I'm sure I'll get it in the end though |
13:51.38 | tasslehoff | pb__: "defaults 99" will make it start last and stop first? |
13:52.04 | ant_work | pb__: yes, arm boot is a long story :) |
13:52.09 | zecke | jest: this argument is weak, today morning I had to explain a ~2 year old patch of mine and my commit message had grammar issues and was crap :) |
13:52.13 | pb__ | tasslehoff: I think that will make it start last and stop first. |
13:52.17 | pb__ | er, sorry, start last and stop last |
13:52.27 | pb__ | if you want start last, stop first, you need "defaults 99 01" |
13:56.30 | jest | zecke: I understand all the care of commit quality and totally support it. However, this requirement may pose problems for unexperienced OE users, as they are not so knowledgeable to understand fully the whole machinery, dependencies, consequences, and so on. So there is a risk of losing potential patches. |
13:58.29 | zecke | jest: it is more about putting thought into the change, no need to be perfect... One difference from user to maintainer is... the user fixes his problem (e.g. in boost version X), the maintainer has to ask if it is in other versions too |
13:58.30 | eFfeM | guys, we yesterday discussed the naming of the mysql5 recipe, it it now mysql5...., should the pacakges also get a mysql5 prefix or just mysql_5.... ? |
13:59.03 | jest | zecke: I definitely a user here :) |
13:59.10 | jest | zecke: I -> I'm |
13:59.13 | zecke | jest: e.g. a commit message telling why other boost recipes do not need to be changed is great for everyone |
13:59.39 | jest | zecke: I guess. It just didn't cross my mind. |
14:00.09 | jest | zecke: Shall I correct it somehow and send a new patch? |
14:02.36 | zecke | jest: please :) |
14:03.01 | jest | zecke: which one? both, or just GNU_HASH |
14:03.05 | tasslehoff | pb__: thanks |
14:03.07 | jest | zecke: ? |
14:04.17 | *** join/#oe greyback (n=greyback@ip-83-147-165-234.dub-3rk1.metro.digiweb.ie) |
14:04.42 | XorA | eFfeM: do what debian does |
14:05.05 | eFfeM | XorA: will check |
14:05.46 | XorA | eFfeM: they have mysql-4.0 mysql-5.0 mysql-5.1 packages |
14:05.54 | eFfeM | ok |
14:05.56 | XorA | so they obviously saw some ABI/API problems |
14:06.33 | zecke | jest: try to write a less brief message |
14:06.45 | eFfeM | btw any idea why I would get libmysqlclient16_5.1.40-r0.4_armv7a.ipk (and especially the number 16) my recipe just has FILES_libmysqlclient = "${libdir}/libmysqlclient.so.*" |
14:07.09 | XorA | eFfeM: debian renaming |
14:07.13 | *** join/#oe sgh (n=quassel@cpe.ge-0-2-0-950.faaqnqu1.customer.tele.dk) |
14:07.45 | eFfeM | ah ok |
14:08.03 | eFfeM | learns something new every day (and sometimes even every hour ;-) ) |
14:09.07 | eFfeM | XorA: the issue with the client name is that if I just postfix with a 5 to distinguish between 4 and 5 the name will become something like libmysqlcient516... |
14:09.22 | XorA | it wont |
14:09.34 | eFfeM | ok |
14:10.17 | XorA | I think you could name it "randomlibraryinhere666" and it would still change name to libmysqlclient16_5.1.40-r0.4_armv7a.ipk |
14:14.15 | hrw | SOVERSION is used for name not number in PACKAGES |
14:17.14 | *** join/#oe MWelchUK_work (n=welchma@65.91.2.71) |
14:19.20 | eFfeM | still one more thing: when installing mysql-server wants libmysqlclient-dev not the regular package, is this something wrong in the recipe ? |
14:21.41 | XorA | eFfeM: yes, means you stuck the libraries in the -dev |
14:22.08 | XorA | eFfeM: normally anyway |
14:27.09 | hrw | shell question I have: how should "if [ -e filename ]" react to filename being broken symlink? |
14:29.17 | th1_ | false |
14:29.27 | hrw | thx |
14:29.36 | hrw | and how to make it return true? |
14:30.11 | th1_ | -h |
14:30.33 | th1_ | -h FILE True if file is a symbolic link. |
14:30.40 | hrw | but it can be also a file sometimes |
14:30.55 | *** join/#oe bbradley_ (n=bbradley@87-194-119-230.bethere.co.uk) |
14:31.12 | th1_ | -h FILE -o -e FILE |
14:31.21 | hrw | thx |
14:33.23 | *** join/#oe rsalveti (n=rsalveti@200.184.118.130) |
14:33.47 | *** join/#oe kergoth (n=kergoth@nat/montavista/x-ae28f951dc329845) |
14:38.16 | recalcati_ | recompiled: still this error: http://pastebin.com/f7c9b47f3 . any idea? |
14:40.31 | kergoth | meh |
14:41.00 | CIA-2 | 03Marcin Juszkiewicz <marcin@buglabs.net> 07org.openembedded.dev * r4270cb2928 10openembedded.git/classes/java.bbclass: (log message trimmed) |
14:41.00 | CIA-2 | java.bbclass: fixed oe_jarinstall for broken symlinks |
14:41.00 | CIA-2 | Code checked for existance of JAR file and if it was present then it had |
14:41.00 | CIA-2 | to be removed before symlinking to it. But it was not working sometimes |
14:41.02 | CIA-2 | so we forced symlinking. |
14:41.04 | CIA-2 | Proper fix is to check "does file exists or is a symlink" which we do |
14:41.06 | CIA-2 | now. |
14:41.54 | eFfeM | XorA: ok, thanks (was afk) just copied the packaging from mysql 4. |
14:42.04 | eFfeM | guess this needs a review once it it done :-) |
14:45.59 | *** join/#oe Hrww (n=hrw@chello089078170228.chello.pl) |
14:47.01 | *** join/#oe ctusar (n=ctusar@router2.videon-central.net) |
14:47.03 | CIA-2 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * rf54128714e 10openembedded.git/ (conf/checksums.ini recipes/sqlite/sqlite3_3.6.20.bb): sqlite3: add 3.6.20 |
14:47.04 | CIA-2 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * r38396f8aa5 10openembedded.git/conf/machine/omap3-touchbook.conf: omap3-touchbook: ship both omapfb and fbdev drivers |
14:47.05 | CIA-2 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * r2b1a41cbb8 10openembedded.git/recipes/xorg-xserver/ (2 files in 2 dirs): xserver-xorg-conf: switch to fbdev driver for touchbook till the vrfb bug gets solved |
15:01.08 | CIA-2 | 03Otavio Salvador <otavio@ossystems.com.br> 07org.openembedded.dev * r0da71f8df5 10openembedded.git/recipes/chicken/chicken.inc: |
15:01.08 | CIA-2 | chicken.inc: fix install and compilation issues |
15:01.08 | CIA-2 | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> |
15:01.35 | *** join/#oe dijenerate (n=dijenera@64.210.44.37) |
15:02.49 | *** join/#oe spaetz (n=spaetz@62.48.113.247) |
15:05.00 | pb__ | kergoth: good morning |
15:05.04 | kergoth | hey |
15:10.16 | *** join/#oe montamer (n=montamer@203.199.213.3) |
15:14.34 | *** join/#oe montamer (n=montamer@203.199.213.3) |
15:18.13 | *** part/#oe jest (n=jest@150.254.31.31) |
15:18.39 | *** join/#oe pH5 (n=ph5@e178195081.adsl.alicedsl.de) |
15:22.38 | RP | hi kergoth |
15:25.46 | *** join/#oe reid02 (n=reid85@CPE001cdf73661f-CM001ceacec55e.cpe.net.cable.rogers.com) |
15:25.50 | reid02 | join #reddit |
15:27.28 | *** join/#oe bbradley (n=bbradley@87-194-119-230.bethere.co.uk) |
15:32.52 | *** join/#oe benlau2 (n=benlau@221.125.8.45) |
15:39.38 | *** join/#oe tzanger (n=tzanger@208.68.91.47) |
15:39.41 | tzanger | good morning |
15:40.14 | tzanger | I'm trying to build the gumstix-basic-image but it's failing almost immediately when trying to unpack libtool |
15:40.24 | tzanger | I was following the instructions on the wiki: http://www.gumstix.net/wiki/index.php?title=Build_Environment_Ubuntu_9.04 |
15:43.17 | th1_ | after rebasing OE from upstream I'm getting several of these: ERROR: Multiple .bb files are due to be built which each provide XXXX (e.g. xfvwm4) (/path/to/XXXX_4.6.1.bb /path/to/XXXX_4.4.1) |
15:43.38 | th1_ | I don't know why it still wants to build the old version of those |
15:46.22 | *** part/#oe thebohemian (n=rschus@p5DDC5972.dip.t-dialin.net) |
15:53.15 | DJWillis | th1_: is the Gumstix setup building Xfce? I did not realise many people used 4.4.1 still (when I asked on the mailing list) when I pushed the upgrade to 4.6. What's in the gumstix-basic-image? Xfce seems OTT for a 'basic' image. |
15:55.28 | th1_ | DJWillis, sorry it was 4.4.2 |
15:55.39 | th1_ | but it is not gumstix, it's XenClient our own custom project. |
15:56.13 | th1_ | I've tried replacing my dependency on task-xfce-base with task-xfce46-base hoping it might be that which pulls in the old version |
15:56.51 | DJWillis | th1_: Sorry, mixed you and tzanger up there ;-). Anyway, 4.4.2 is still old, I am suprised you have a prefered version in there somewhere, that would normally cause that sort of issue. |
15:57.06 | th1_ | I don't have it in my custom tree anywhere |
15:57.22 | DJWillis | th1_: something old and Xfce 4.4 in there like xffm or xcalender? |
15:57.35 | th1_ | but after replacing task-xfce-base with task-xfce46-base in my image recipe it's not showing it anymore for xfwm (yet at least) |
15:57.57 | th1_ | no there's nothing like that in there actually |
15:58.03 | DJWillis | I am using the task-xfce46-* for a few builds without any issues with hte 4.4.* stuff still in tree. |
15:58.09 | th1_ | ok |
15:58.42 | DJWillis | How many recipies do it other than XFWM4? |
15:58.48 | th1_ | just gconf |
15:58.59 | th1_ | probably down to network manager applet |
15:59.09 | th1_ | which I have a custom hacked version for... |
15:59.22 | *** join/#oe orbarron (n=orb@nat/ti/x-b06d899480bac6b6) |
15:59.46 | DJWillis | I would expect any odd vesion stuff to call in more then just XFWM4, hmmm, what DISTRO if any? |
16:00.01 | *** join/#oe Sleep_Walker (n=Sleep@nat/novell/x-d8be47428441aafc) |
16:00.10 | th1_ | ahh yes xfce4-panel and sundy others as well :) |
16:00.14 | th1_ | but that has gone with using the 46 task |
16:00.39 | th1_ | DISTRO="angstrom-2008.1" |
16:02.34 | *** join/#oe cyberdeck (n=cyberdec@iss66.vlsi.informatik.tu-darmstadt.de) |
16:02.41 | *** join/#oe tomasg (n=tomas@rrcs-67-78-37-210.sw.biz.rr.com) |
16:02.49 | *** join/#oe thebohemian (n=rschus@p5DDC5972.dip.t-dialin.net) |
16:05.01 | DJWillis | th1_: do you have your image file or task file somewhere public? |
16:06.35 | *** join/#oe mario-goulart (n=user@67.205.85.241) |
16:06.41 | tomasg | Hello... I'm tring to remove a dependency under the angstrom distro that is confounding me: Missing or unbuildable dependency chain was: ['virtual/kernel', 'u-boot-mkimage-openmoko-native'] |
16:07.08 | tomasg | I'm not using openmoku, and I've set up my own linux kernel and u-boot (local overlay) recipes |
16:08.32 | *** join/#oe Timelord (n=TL@16.8c.d12c.cidr.airmail.net) |
16:12.23 | th1_ | DJWillis, let me find out ... :) |
16:16.46 | tomasg | ahhhhh... nevermind... i found the hard dependency under kernel.bbclass. don't know why my grep didn't pull this up earlier.. |
16:17.40 | *** join/#oe xxiao (n=chatzill@cpe-70-123-143-205.austin.res.rr.com) |
16:18.51 | *** part/#oe thebohemian (n=rschus@p5DDC5972.dip.t-dialin.net) |
16:20.11 | DJWillis | wonders what was wrong with the existing mkimage-native that OM needed to override it? |
16:20.52 | XorA | DJWillis: other way round |
16:21.17 | XorA | DJWillis: the OM version was first, people didnt like seeing the name openmoko in build logs and created the other one |
16:22.04 | hrw | and openmoko one is ugly due to lot of patches applied |
16:22.14 | hrw | uboot-utils-native do the same iirc |
16:22.27 | DJWillis | XorA: Mea culpa! |
16:23.04 | XorA | the OM version could go away now, but no-one can be bothered :-D |
16:23.10 | tzanger | when a bitbake script fails, is there somewhere I can look to see the actual compiler output? |
16:23.16 | tzanger | or a way to tell bitbak to put that up on the screen for me? |
16:23.46 | DJWillis | tzanger: it will tell you where the log you want to look at is ;-) |
16:26.20 | tzanger | DJWillis: hmm, I'm not seeing it but I do see the compiler errors |
16:26.35 | tzanger | stupid "error out on warnings" is fine, but for output of asprintf? gimme a break |
16:27.51 | tzanger | wtf |
16:27.59 | tzanger | (void)asprintf(...) should be enough to shut that warning up |
16:29.51 | *** join/#oe marex (n=marex@vasut.kolej.mff.cuni.cz) |
16:33.40 | *** join/#oe BET-frogger (n=frogger@cl-2094.ham-01.de.sixxs.net) |
16:34.27 | tzanger | hmm very weird errors, maybe I really should have downgraded the compiler :-) |
16:34.38 | tzanger | gcc-4.4.1 doesn't like it, gcc-4.1 is supposed |
16:34.41 | tzanger | er supposed to |
16:44.10 | *** join/#oe otavio (n=otavio@debian/developer/otavio) |
16:45.15 | CIA-2 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * re9c3ba01c8 10openembedded.git/recipes/gnome-mplayer/ (gecko-mediaplayer_0.9.8.bb gnome-mplayer_0.9.8.bb): |
16:45.15 | CIA-2 | gecko-mediaplayer: fix packaging |
16:45.15 | CIA-2 | gnome-mplayer: bump PR |
16:45.16 | CIA-2 | The symlinking should be done in a postinst, but I'm too low on caffeine right now to make that work |
16:49.04 | tzanger | hmm, is there a way to tell bitbake to use a specific gcc/g++? I'd really, REALLY rather not have to have the entire computer using the older compiler |
16:49.14 | *** join/#oe claudiu (n=claudiu-@host53-248-dynamic.15-87-r.retail.telecomitalia.it) |
16:49.27 | pb__ | as your native compiler, you mean? |
16:51.13 | tzanger | correct |
16:51.20 | tzanger | I'd like to continue to use gcc 4.4.1 for everything else on the system |
16:51.28 | pb__ | see ${BUILD_CC} in bitbake.conf |
16:51.32 | tzanger | but I'd like to tell OE to use gcc 4.1 to build the cross compiler and tools |
16:53.35 | tzanger | aha, that looks like what I want to modify. perfect |
16:53.51 | tzanger | now that I've done that though, what's the command to clean out everything I've built so far so I can start over? |
16:54.09 | pb__ | rm -rf tmp? |
16:54.13 | hrw | bye all |
16:54.15 | *** join/#oe woglinde (n=henning@p5DDC5972.dip.t-dialin.net) |
16:54.21 | hrw | see you on oedem |
16:54.24 | tzanger | really, that simple? groovy. |
16:54.26 | woglinde | oh |
16:54.32 | tzanger | as you can see I'm a little new to OE and bitbake :-) |
16:54.33 | woglinde | bye hrw |
16:54.41 | pb__ | yeah, everything in tmp is expendable |
16:54.53 | tzanger | the downloads aren't in there are they? |
16:55.02 | th1_ | tzanger, no |
16:55.03 | pb__ | shouldn't be. they usually go to ~/sources/ or some such |
16:55.16 | pb__ | you can configure that in local.conf though so it might be worth checking what you have set. |
16:55.38 | pb__ | seems unlikely that you would have accidentally set DL_DIR to be a path inside tmp, but... :-} |
16:58.12 | *** join/#oe alecrim (n=alecrim@189.2.128.130) |
16:58.42 | *** join/#oe bbradley_ (n=bbradley@87-194-119-230.bethere.co.uk) |
17:01.37 | tzanger | :-) |
17:01.39 | tzanger | thanks again guys |
17:08.48 | mckoan | see you tomorrow in UK |
17:11.46 | *** part/#oe claudiu (n=claudiu-@host53-248-dynamic.15-87-r.retail.telecomitalia.it) |
17:25.45 | CIA-2 | 03Jeremy Lainé <jeremy.laine@m4x.org> 07org.openembedded.dev * r56db8bc2ab 10openembedded.git/conf/bitbake.conf: |
17:25.45 | CIA-2 | bitbake.conf: add support for "cpio.lzma" images |
17:25.45 | CIA-2 | * add support for LZMA-compressed cpio images for use as Linux |
17:25.45 | CIA-2 | RamDisk images. |
17:26.07 | tzanger | hmm, that didn't seem to change the compielr used, bugger. |
17:26.17 | CIA-2 | 03Brijesh Singh <bksingh@ti.com> 07org.openembedded.dev * r0816c962bd 10openembedded.git/recipes/ti/ti-dmai.inc: |
17:26.17 | CIA-2 | ti-dmai_svn: bumup svn rev |
17:26.17 | CIA-2 | This has proper CPU detection, so no need to manually add platforms anymore |
17:28.14 | noglitch | hi |
17:28.32 | noglitch | is somebody knows how to launch a QT embedded application ? |
17:28.58 | noglitch | is there a framebuffer manager to launch before running the application ? |
17:29.08 | noglitch | qws ? |
17:32.59 | *** join/#oe alecrim (n=alecrim@189.2.128.130) |
17:33.18 | woglinde | you can run it with -nodaemon or so |
17:33.26 | woglinde | cant remember exactly |
17:35.18 | woglinde | okay bye till later |
17:36.34 | *** join/#oe timtimred (n=meh@79-75-151-48.dynamic.dsl.as9105.com) |
17:39.42 | *** join/#oe dos1 (n=dos@unaffiliated/dos1) |
17:45.58 | noglitch | ok I manage to run a qte application : ./qte-example -qws |
17:46.06 | noglitch | all is good ! |
17:53.43 | *** join/#oe toi (n=toi@d54C2A96D.access.telenet.be) |
17:59.11 | *** join/#oe CosmicPenguin (n=nobody@66-162-99-237.static.twtelecom.net) |
18:06.47 | *** join/#oe rddDavid51 (n=roudoudo@78.234.93.192) |
18:10.13 | *** join/#oe Gnutoo (n=gnutoo@host87-147-dynamic.44-79-r.retail.telecomitalia.it) |
18:12.42 | *** part/#oe Tartarus (i=trini@pixelshelf.com) |
18:14.06 | *** join/#oe mango_make (n=dan@89.193.17.170) |
18:16.06 | mango_make | hi guys, have an Angstrom install on Zaurs c760, booting from SD, it used to boot fine. I have installed a whole host of packages and rebooted and now it hangs at usb0: RNDIS ready. odd thing is the version i flashed to the internal flash does this too, but always did from the first time i flashed it |
18:16.42 | mango_make | any ideas what casues that? |
18:17.02 | mango_make | as it boots from SD i shoul din thoery be ablel to fix the issue form PC |
18:36.23 | *** join/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
18:37.30 | *** join/#oe xjqian (n=gordon@68-184-201-0.dhcp.stls.mo.charter.com) |
18:40.42 | *** join/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
18:42.23 | *** join/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
18:44.01 | *** join/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
18:46.21 | *** join/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
18:48.52 | *** join/#oe archae0pteryx (n=snewman@207.47.42.130.static.nextweb.net) |
18:49.20 | *** join/#oe jest (n=jest@103-215.echostar.pl) |
18:55.17 | *** join/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
19:00.59 | *** join/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
19:02.59 | *** join/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
19:04.47 | *** join/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
19:08.22 | *** join/#oe kg4ysn (n=kg4ysn@dsl081-028-098.sfo1.dsl.speakeasy.net) |
19:10.50 | *** join/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
19:13.07 | *** join/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
19:16.05 | kg4ysn | has anyone experienced an issue in compiling connman_git.bb with "signal" being redefined in bluetooth.lo? |
19:17.25 | *** join/#oe bluelightning (n=blueligh@93-96-131-185.zone4.bethere.co.uk) |
19:20.02 | *** join/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
19:22.28 | *** part/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
19:22.32 | *** join/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
19:24.41 | *** join/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
19:28.53 | *** join/#oe florian (n=fuchs@Maemo/community/contributor/florian) |
19:30.27 | *** join/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
19:34.10 | *** join/#oe likewise (n=chatzill@82-171-51-231.ip.telfort.nl) |
19:36.42 | *** join/#oe MWelchUK_work_ (n=welchma@65.91.2.71) |
19:42.59 | *** join/#oe amitshah1 (n=amit@utdpat241047.utdallas.edu) |
19:47.06 | CIA-2 | 03Artur Wronowski <arteqw@gmail.com> 07org.openembedded.dev * r69026f3da9 10openembedded.git/ (conf/checksums.ini recipes/libpar2/libpar2_0.2.bb): libpar2: new recipe; multi-part archives library |
19:47.16 | CIA-2 | 03Artur Wronowski <arteqw@gmail.com> 07org.openembedded.dev * r9a06361338 10openembedded.git/recipes/nzbget/ (nzbget.inc nzbget_0.6.0.bb nzbget_0.7.0-testing.bb): nzbget: new recipe; a command-line based binary newsgrabber for nzb files |
19:47.17 | florian | re |
19:49.39 | *** join/#oe sgh (n=quassel@0x4dd5bf76.adsl.cybercity.dk) |
19:56.41 | mckoan | hi florian |
19:58.53 | *** join/#oe qsp (n=qsp@bl6-40-197.dsl.telepac.pt) |
20:00.22 | *** join/#oe xjqian (n=gordon@mscitspubwlgw.wustl.edu) |
20:01.55 | *** join/#oe likewise (n=chatzill@82-171-51-231.ip.telfort.nl) |
20:03.10 | *** join/#oe amitshah1 (n=amit@utdpat242007.utdallas.edu) |
20:06.24 | qsp | good evening everyone. i'm trying to extract angstrom's linux-rp kernel .config i thought i could make it with bitbake -c menuconfig virtual/kernel |
20:06.42 | qsp | but this starts menuconfig and the generated.conf seems to be a default one |
20:06.50 | qsp | am i missing something here? |
20:07.30 | *** join/#oe lookingAround (n=chatzill@64.85.190.26) |
20:09.26 | CIA-2 | 03Michael 'Mickey' Lauer <mickey@vanille-media.de> 07org.openembedded.dev * r97ae177996 10openembedded.git/conf/machine/htcdream.conf: conf/machine/htcdream.conf: mention commercial device names in description |
20:09.37 | CIA-2 | 03David Lanzendörfer <david.lanzendoerfer@o2s.ch> 07org.openembedded.dev * r1d86318cd9 10openembedded.git/recipes/linux/ (12 files in 10 dirs): linux-replicant: new recipe; kernel tree for HTC devices |
20:24.12 | khem | gm all |
20:28.37 | tzanger | urg. |
20:28.52 | tzanger | unifdef-native redefines getline() |
20:29.08 | RP | mickey|zzZZzz: I need to talk to you about python and these staging changes at some point ;-) |
20:29.31 | RP | hi khem |
20:30.03 | khem | RP: I will cherry pick your branch into my local branch |
20:30.07 | khem | this weekend |
20:30.35 | RP | khem: ok, sounds good. My testing in Poky has gone well |
20:30.49 | RP | My OE testing is less complete but also showed no problems |
20:31.06 | kergoth | should try it in mvl6, too |
20:31.20 | *** join/#oe playya (n=playya@unaffiliated/playya) |
20:31.31 | khem | tzanger: hmmm it must be fixed getline is a POSIX function. May be unifdef should rename it to mygetline or something else |
20:31.48 | RP | Coverage wise for poky, 205/972 recipes to convert to new staging. 59 -native recipes not using BBCLASSEXTEND remain |
20:32.00 | khem | cool |
20:32.24 | RP | and of that -59, a load only have a -native version |
20:35.01 | khem | tzanger: hmmm OE version of unifdef is fixed on .dev |
20:35.25 | tzanger | khem: that's exactly what I did, was make it mygetline |
20:36.05 | khem | tzanger: thats right approarch |
20:41.08 | tzanger | thanks |
20:43.02 | *** join/#oe qsp (n=qsp@bl9-28-254.dsl.telepac.pt) |
20:56.08 | kg4ysn | for anyone who might be interested, there seems to be a variable name conflict between connman_0.42 and /usr/include/signal.h in the connman/plugins/bluetooth.c file. Both define a variable "signal", but of different types. Upstream, connman changed this variable in their package to "watch" -- see version 0.46. Unfortunately, the "sane-rev" for connman in OE is stuck at 0.42, so you have to grab the new GIT tag and override it in your |
20:56.08 | kg4ysn | local.conf. (This message is mostly for the IRC sniffers for those who may Google search for the problem.) |
21:05.43 | *** join/#oe spaetz (n=user@62.48.113.247) |
21:10.33 | khem | you can post a patch to ml |
21:11.43 | kg4ysn | khem: yeah, i have a number of patches to submit. i'm queueing them up for when we release our product. |
21:12.42 | khem | kg4ysn: nice |
21:13.32 | kg4ysn | khem: does OE have their patch submission guidelines anywhere? I'm used to the kernel's process, but wasn't sure if there were differences preferred by the OE team. |
21:13.53 | khem | its same almost |
21:14.15 | khem | there is a wiki link |
21:14.39 | kg4ysn | khem: ok i've seen that. it was fairly sparse, so i'll just do my best and hope it works. :-) |
21:14.47 | kg4ysn | khem: thanks for confirming |
21:15.59 | khem | yeah, git-format your patches with signed-offs and git send-email them to openembedded-devel ml |
21:16.43 | khem | they will then appear in the patchwork.openembedded.org and reviewed and applied |
21:16.47 | kg4ysn | i'll try to make them an early christmas present then |
21:17.08 | khem | heh that might be a time when activity is low |
21:18.43 | *** join/#oe Martin-B (n=martin@pool-139-67-198-89.dbd-ipconnect.net) |
21:19.54 | *** join/#oe dth (n=Dieter@p4FDEB0CA.dip.t-dialin.net) |
21:21.18 | *** join/#oe mango_make (n=dan@89.192.231.202) |
21:22.12 | mango_make | has anybody done any performance tests with qt4-embedded vs qt4-x11 ? |
21:23.04 | *** join/#oe likewise (n=chatzill@82-171-51-231.ip.telfort.nl) |
21:26.48 | *** join/#oe Sleep_Walker (n=Sleep@193.179.96.131) |
21:27.36 | *** join/#oe Jay7 (n=jay@93-81-70-123.broadband.corbina.ru) |
21:28.38 | jest | qsp: you are right, there is a problem with menuconfig |
21:29.24 | qsp | jest: and there is some workaround? |
21:29.41 | jest | qsp: I'm trying with linux-2.6.28 and have the same effect as you did |
21:30.01 | qsp | as i've been telling in the last days here, i'm configuring a kernel for c700 cause angstrom one wont boot |
21:30.08 | *** join/#oe cminyard (n=cminyard@pool-173-57-145-237.dllstx.fios.verizon.net) |
21:30.34 | qsp | so i wanted to get current config and then try to meddle with the options :-) |
21:31.16 | qsp | so it took me 2 days to compile a kernel with bitbake :-) many obstacles, and this is the latest one :-) that i cant extract the .config :-) |
21:31.17 | jest | qsp: I just tried 'bitbake virtual/kernel' and now I have two files, .config and .config.old. Of course the same, but this allows me to copy .config and reuse later |
21:31.49 | qsp | mm, i'll try then |
21:33.17 | jest | qsp: try this: |
21:33.17 | jest | 1. bitbake virtual/kernel -c configure |
21:33.17 | jest | 2. bitbake virtual/kernel -c menuconfig |
21:33.17 | jest | 3. bitbake virtual/kernel |
21:33.39 | jest | qsp: I try it as well right now, I'll let you know |
21:33.52 | qsp | thank you! :-) starting the process :-) |
21:40.04 | khem | bitbake virtual/kernel -c listtasks will show you available tasks |
21:40.18 | khem | for given recipe |
21:40.26 | qsp | yes, i was inspecting the tasks |
21:40.31 | qsp | and i tried unpack one |
21:40.35 | CIA-2 | 03Stanislav Brabec <utx@penguin.cz> 07org.openembedded.dev * r3cc58ee273 10openembedded.git/recipes/ncurses/ncurses.inc: ncurses: Always use --enable-static to work-around possible linking problems. |
21:40.39 | qsp | thought it would just unpack the sources |
21:40.43 | khem | unpack just creates src tree |
21:40.46 | CIA-2 | 03Stanislav Brabec <utx@penguin.cz> 07org.openembedded.dev * r11f33f70f6 10openembedded.git/recipes/gdb/gdb_7.0.bb: gdb-7.0: Always use --enable-static to work-around possible linking problems. |
21:41.21 | qsp | thats it.. it didnt touch .config |
21:41.33 | qsp | i'm now trying as per jest suggestion |
21:41.58 | qsp | :-) should open champagne when i finally can boot my zaurus again :-D |
21:42.23 | *** join/#oe pirho (i=pirho@gateway/gpg-tor/key-0x2CEEC9CB) |
21:43.49 | CIA-2 | 03Stanislav Brabec <utx@penguin.cz> 07org.openembedded.dev * r21cb1d0889 10openembedded.git/recipes/gnome/gnome-icon-theme_2.28.0.bb: gnome-icon-theme-2.28.0: Set it as arch-independent package. |
21:44.56 | *** join/#oe orbarron1 (n=orb@nat/ti/x-23f53889de39b1c0) |
21:46.05 | jest | qsp: looking at do_menuconfig, it simply does 'make menuconfig'. So, no special magic regarding even creating .config |
21:46.44 | jest | qsp: and do_configure is different, as it creates .config based (somehow) on defconfig |
21:47.01 | qsp | its making the configure task |
21:47.07 | qsp | just, so that i learn it as well |
21:47.16 | qsp | how do you see the details of the task? |
21:47.41 | *** join/#oe claudiu_m (n=claudiu@host53-248-dynamic.15-87-r.retail.telecomitalia.it) |
21:47.41 | jest | qsp: because both do_configure and do_menuconfig goes after do_patch, I think it should work to do 'configure' and then 'menuconfig' |
21:48.18 | qsp | mm... it failed :-/ |
21:48.20 | jest | qsp: I run a specified task, and then look at run.do_... files in work |
21:48.55 | jest | qsp: this way you see exactly what is going on, after any magic of bitbake, inheritance, etc. |
21:49.27 | qsp | ah, so i should tail them :-) |
21:49.49 | *** join/#oe ant__ (n=andrea@host191-189-dynamic.60-82-r.retail.telecomitalia.it) |
21:51.15 | cbrake | Melo (git server) will be down for about 20 minutes over the next 1.5 hours |
21:51.17 | CIA-2 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * r25904bc071 10openembedded.git/: Merge branch 'org.openembedded.dev' of git@git.openembedded.org:openembedded into org.openembedded.dev |
21:51.20 | CIA-2 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * rb8d29529be 10openembedded.git/recipes/linux/ (2 files in 2 dirs): linux-omap-pm 2.6.29: add hack to get asoc to register on the touchbook |
21:51.24 | qsp | khem: yes, just its not always obvious what each task do |
21:51.26 | jest | qsp: slowly... after 'configure' I have .config which is exactly the same as 'defconfig', with exception of CONFIG_LOCALVERSION |
21:51.30 | cbrake | we need to replace some RAM |
21:52.07 | qsp | jest:then its exactly what i need :-) |
21:52.15 | khem | cbrake: how much are you putting on |
21:52.19 | qsp | maybe my machine is slower here, cause its still running |
21:52.41 | jest | qsp: so, you don't need to add manual changes to .config? |
21:52.55 | qsp | yes, i will |
21:53.04 | qsp | after i get the default ones |
21:53.24 | cbrake | khem: I'm not actually sure |
21:53.38 | qsp | jest: i'll compare with kexecboot kernel, which is stripped down, and see what might be causing it not to boot in my zaurus |
21:53.55 | cbrake | khem: we're hoping to upgrade the Melo VM to 1.5G, but the machine itself has something crazy like 24G |
21:54.04 | khem | cbrake: it will be faster afterward I hope |
21:54.09 | qsp | jest: as everyone told me so far, it might be a mem issue, cause the c700 is only 32mb |
21:54.14 | cbrake | khem: have you noticed it being slow? |
21:54.28 | khem | cbrake: I think its been good |
21:54.38 | khem | not that I clone often |
21:54.45 | khem | but pulls are ok |
21:54.50 | cbrake | khem: nod, neither do I |
21:55.13 | khem | someone cloning frequently could tell better |
21:56.13 | jest | qsp: what 'configure' does is 'make oldconfig'; what is interesting, it calls this target *twice* :O |
21:57.30 | qsp | i did try a bitbake -c oldconfig before, but it isnt a task on its own, so you just found exactly what i was looking for :-) thank you. can't wait for it to finish |
21:58.05 | CIA-2 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * rc1ff4bb5b8 10openembedded.git/ (conf/checksums.ini recipes/webkit/arora_0.10.1.bb): |
21:58.05 | CIA-2 | arora: add 0.10.1. Arora is a qtwebkit based browser. |
21:58.05 | CIA-2 | This recipe is ugly because neither I nor the upstream authors know how to use qmake |
21:58.05 | CIA-2 | screenie: http://scap.linuxtogo.org/files/25c0d644dfabb484382183269e8af286.png |
22:02.56 | *** join/#oe santamarta (n=Juanjo@195.Red-213-96-224.staticIP.rima-tde.net) |
22:03.22 | jest | qsp: looks like the procedure I gave you works, i.e. it creates default, correct .config for my machine and let me change anything with menuconfig, and then build the kernel |
22:04.03 | *** join/#oe thaytan (n=jan@78.16.51.22) |
22:04.04 | jest | qsp: I can't confirm fully, as I don't know how to check contents of the kernel image file without booting it |
22:04.52 | tzanger | hmm |
22:05.21 | tzanger | libtool-cross is erroring out on decompress with a broken pipe... any ideas on how to get around that? it decompresses just fine by hand but it still tries to do it again when I re-run bitbake |
22:05.44 | *** part/#oe claudiu_m (n=claudiu@host53-248-dynamic.15-87-r.retail.telecomitalia.it) |
22:05.47 | kergoth | sounds like you're using an oe tree that doesn't have the subprocess SIGPIPE fix |
22:06.14 | tzanger | possible, it's the gumstix-oe tree |
22:09.25 | kergoth | cd upstreamoe; git log -SPIPE org.openembedded.dev -- classes/base.bbclass |
22:13.48 | tzanger | I'll have to pull it manually, they use svn and git won't let me do what you're suggesting :-) |
22:14.21 | *** join/#oe grg (n=grg@eth7090.sa.adsl.internode.on.net) |
22:14.45 | kergoth | i said "cd upstreamoe" for a reason. upstream oe isn't svn. |
22:15.15 | ant__ | khem: hi, any idea how to circumvent this (new kernel headers brought this issue): kernel/qpixmapcache.cpp:125:57: error: asm/page.h: No such file or directory |
22:19.04 | khem | ant__: search for this include and delete it in the sources |
22:19.19 | ant__ | ah :) |
22:19.29 | ant__ | provided by modern libc? |
22:19.56 | ant__ | I had found it in klibc |
22:21.13 | khem | oh |
22:21.17 | ant__ | and bluelightning found out this: http://www.nntp.perl.org/group/perl.perl5.porters/2007/02/msg121370.html |
22:21.22 | khem | klibc is probably not so modern |
22:21.48 | ant__ | nkhem: was only found by grepping, no use of klibc in this project :) |
22:22.31 | *** join/#oe santamarta (n=Juanjo@195.Red-213-96-224.staticIP.rima-tde.net) |
22:23.07 | tzanger | kergoth: that fixed it, many thanks. |
22:23.47 | kergoth | np |
22:24.03 | khem | ant__: which packge is this |
22:24.21 | *** join/#oe santamarta (n=Juanjo@195.Red-213-96-224.staticIP.rima-tde.net) |
22:24.54 | ant__ | he qte-mt_2.3.10.bb |
22:25.04 | ant__ | (opie-image) |
22:26.25 | khem | ant__: you should try to get rid of including this file and replacing the functionality |
22:27.36 | *** join/#oe santamarta (n=Juanjo@195.Red-213-96-224.staticIP.rima-tde.net) |
22:31.25 | *** join/#oe santamarta (n=Juanjo@195.Red-213-96-224.staticIP.rima-tde.net) |
22:36.19 | *** join/#oe john268 (n=john268@99-26-125-126.lightspeed.sndgca.sbcglobal.net) |
22:46.16 | *** join/#oe nslu2-log (n=nslu2-lo@limax.nslu2-linux.org) |
22:46.53 | ant__ | Jay7: we still miss Pavel |
22:47.01 | *** part/#oe john268 (n=john268@99-26-125-126.lightspeed.sndgca.sbcglobal.net) |
22:47.38 | Jay7 | ant__: I see.. |
22:47.44 | Jay7 | we are working on this :) |
22:48.28 | ant__ | btw I fear that Laibsch did NOT yet send a serial cable to Pavel :/ |
22:48.28 | Jay7 | florian: I suspect some problems.. |
22:48.54 | Jay7 | florian: I've sent some test mails to zaurus-devel@ but w/o any visible success |
22:48.59 | florian | Jay7: oh no :-( |
22:49.13 | Jay7 | what is graylisting timeout? |
22:49.21 | Jay7 | (if any) |
22:50.11 | Jay7 | ant__: do Laibsch still have zaurus? |
22:50.33 | ant__ | think so, but he has some cables |
22:50.42 | ant__ | iirc |
22:50.59 | Jay7 | seems we should catch him then :) |
22:51.27 | florian | Jay7: the default ;) |
22:51.39 | ant__ | one month? |
22:51.43 | ant__ | :D |
22:51.50 | Jay7 | :)) |
22:51.58 | Jay7 | well... |
22:52.05 | Jay7 | let's wait then.. |
22:52.24 | *** join/#oe john268 (n=jsynesio@99-26-125-126.lightspeed.sndgca.sbcglobal.net) |
22:54.09 | *** join/#oe aloisiojr (n=aloisio@84-231-70-176.elisa-mobile.fi) |
22:57.06 | ant__ | Jay7: hooray \°/ |
22:57.21 | ant__ | florian: congrats |
22:59.30 | Jay7 | ~20 min is gone from last mail to list was sent :( |
22:59.31 | ibot | Jay7: okay |
22:59.39 | Jay7 | hm.. |
22:59.43 | ant__ | lol |
22:59.50 | Jay7 | smart bot :) |
22:59.57 | bluelightning | ibot: what is 20 min |
22:59.58 | ibot | well, 20 min is gone from last mail to list was sent :( |
23:00.02 | bluelightning | hahaha |
23:00.09 | ant__ | hmpfff |
23:00.13 | bluelightning | good teaching there |
23:00.24 | ant__ | good english too |
23:00.30 | bluelightning | ibot: forget 20 min |
23:00.30 | ibot | i forgot 20 min, bluelightning |
23:00.54 | bluelightning | ~botsnack |
23:00.54 | ibot | bluelightning: :) |
23:00.54 | Jay7 | well.. i should replace ~ with about then :) |
23:01.16 | ant__ | bluelightning: don't harrass the pet! |
23:01.26 | bluelightning | ~lart ant__ |
23:01.26 | ibot | gives ant__ an extra strength ACME sleeping pill, sending ant__ to sleep for 150 years, and awakening to seven strange dwarfs and a large apple |
23:01.42 | bluelightning | hmm... |
23:01.57 | ant__ | omg |
23:09.34 | florian | Jay7: its supposed to be 10 minutes |
23:09.58 | *** part/#oe jest (n=jest@103-215.echostar.pl) |
23:10.07 | Jay7 | florian: hm.. |
23:10.35 | florian | Jay7: it does not seem to work as expected, disabling it now |
23:12.25 | Jay7 | florian: can you look into smtp-server log for mail from jay4mail at gmail.com? |
23:13.32 | florian | takes a look |
23:32.43 | *** part/#oe amitshah1 (n=amit@utdpat242007.utdallas.edu) |