| 00:18.01 | jnc | JustinP: i have almost totally trashed my c3000 and brought it back to stock configuration |
| 00:18.11 | jnc | this time it has a new partition scheme |
| 00:18.37 | jnc | i'm impressed by how well the sharp ROM functions for playback and video |
| 00:18.48 | jnc | also it does not crash with suspend |
| 00:18.51 | jnc | and stuff kind of works |
| 00:19.10 | jnc | it would be very nice to keep the sharp ROM and also have open zaurus on the new partitions |
| 00:20.04 | JustinP | jnc: the only way that's possible is to use NAND backups and restores |
| 00:20.18 | JustinP | the OZ kernel won't work with the Sharp ROM |
| 00:20.22 | JustinP | module renames and such |
| 00:20.24 | jnc | JustinP: http://phpfi.com/70660 |
| 00:20.38 | jnc | oh okay |
| 00:20.47 | jnc | there's no way to boot strap to a new kernel or something? |
| 00:20.59 | jnc | i wish there were a boot loader that could choose |
| 00:21.21 | JustinP | jnc: I also wish for such a thing but I don't know if it's even possible |
| 00:21.32 | jnc | i'm sure it is, we will discover how |
| 00:21.34 | jnc | :) |
| 00:21.45 | JustinP | I asked about it a while ago and no one else knew as well (I didn't look all *that* far, but...) |
| 00:22.25 | JustinP | jnc: again, what recovery envirinment? |
| 00:22.43 | jnc | hold "M+B" keys with battery out and switch to off position |
| 00:22.53 | jnc | then turn switch on, add AC plug |
| 00:22.59 | jnc | let go of buttons |
| 00:23.06 | jnc | i think |
| 00:23.24 | jnc | it was the built-in linux recovery environment |
| 00:23.34 | jnc | the one on the sharp ROM |
| 00:23.51 | jnc | need a nap |
| 00:23.57 | JustinP | hmmm, I never tried that |
| 00:24.11 | JustinP | I've used D+M of course, but not M+B |
| 00:24.16 | JustinP | ok, back to work |
| 00:37.42 | *** join/#openzaurus linuxwhore (~johnh@65-103-7-104.mpls.qwest.net) |
| 00:48.52 | AppleBoy | yeah, because my server kicks ass :) |
| 00:50.30 | *** join/#openzaurus Geo_KM (~keith@bh02i525f01.au.ibm.com) |
| 01:18.19 | *** join/#openzaurus hufnus (~slonsiki@m228f36d0.tmodns.net) |
| 01:40.15 | *** join/#openzaurus Cwiiis (~cwiiis@82-43-40-186.cable.ubr02.croy.blueyonder.co.uk) |
| 01:40.43 | Cwiiis | Hey, anybody about? |
| 01:53.35 | *** join/#openzaurus darmou (~darmou@CPE-61-9-146-174.vic.bigpond.net.au) |
| 01:54.42 | *** join/#openzaurus synth (~cb@pcp838545pcs.venice01.fl.comcast.net) |
| 03:03.09 | *** join/#openzaurus hufnus (~slonsiki@m228f36d0.tmodns.net) |
| 03:06.29 | jnc | JustinP: yeah, that's what i really meant. D+B and D+M |
| 03:06.31 | jnc | i think |
| 03:28.27 | *** join/#openzaurus Shdwdrgn (Picard@sourpuss.net) |
| 04:22.26 | *** join/#openzaurus synth (~cb@pcp838545pcs.venice01.fl.comcast.net) |
| 04:26.13 | *** join/#openzaurus hufnus (~slonsiki@m228f36d0.tmodns.net) |
| 04:26.45 | *** join/#openzaurus hardwire (~hardwire@209.112.194.45) |
| 04:28.43 | *** join/#openzaurus kakos (~kakos@c-24-8-182-72.hsd1.co.comcast.net) |
| 04:29.19 | kakos | Hello! |
| 04:35.03 | *** join/#openzaurus AnalogTek ([U2FsdGVkX@c-24-128-75-254.hsd1.nh.comcast.net) |
| 04:46.02 | *** join/#openzaurus Geo_KM (~keith@bh02i525f01.au.ibm.com) |
| 04:47.32 | *** join/#openzaurus _Radiance (kryptonite@wrath.shellfx.net) |
| 05:14.22 | *** join/#openzaurus __law__ (~law@mail.stiftadmont.at) |
| 06:29.54 | *** join/#openzaurus alan_ (~alan@ARouen-152-1-35-98.w83-115.abo.wanadoo.fr) |
| 06:30.11 | alan_ | bonjour !!! |
| 07:01.42 | *** join/#openzaurus dmx_ (~dmx@ppp83-237-232-185.pppoe.mtu-net.ru) |
| 07:01.49 | *** join/#openzaurus Exis (~Exis@cpe-65-24-37-212.columbus.res.rr.com) |
| 07:01.55 | dmx_ | Hi All. |
| 07:16.35 | *** join/#openzaurus AnalogTek ([U2FsdGVkX@c-24-128-75-254.hsd1.nh.comcast.net) |
| 07:24.45 | *** join/#openzaurus frdy (~adam_frdy@85.219.154.80) |
| 07:26.40 | *** part/#openzaurus J (~john@cpc2-mfld2-5-1-cust85.nott.cable.ntl.com) |
| 07:33.45 | alan_ | does anyone remember the name of the programm i should use to beam from command line ? |
| 07:34.28 | alan_ | hi hrw ! |
| 07:35.12 | hrw|work | hi |
| 07:45.22 | alan_ | where do you set the font used in terminal ? in the look and feel tab, you can only set the size of the font in the "terminal" part. |
| 07:48.35 | hrw|work | nowhere |
| 07:48.43 | hrw|work | I reported bug for it |
| 07:48.49 | hrw|work | if you talk about gpe |
| 07:49.07 | alan_ | yeah. ok. thanks hrw|work |
| 07:51.38 | alan_ | hrw|work: i use dejavu fonts in gpe : it rocks ! it's really readable. Plus XorA found bitstream-vera made Abiword segfault when trying to use Italic fonts. Once more i vote for dejavu to become the default font. d(^^)b |
| 07:51.39 | hrw|work | someone with collie here? |
| 07:51.57 | hrw|work | alan_: talk with gpe maintainers |
| 07:52.03 | alan_ | ok. |
| 07:52.38 | *** join/#openzaurus BleedAway (whocares@saus04.usc.es) |
| 08:09.24 | XorA | alan_: you need to edit gpe-xtermwrapper.sh |
| 08:09.38 | XorA | alan_: if you are about later I can pastebin mine |
| 08:09.43 | *** join/#openzaurus Piranha- (piranha@d209-89-80-129.abhsia.telus.net) |
| 08:09.48 | alan_ | XorA: haaaa... thanks ! |
| 08:14.55 | *** join/#openzaurus Curty (~Cascade@62.214.143.20) |
| 08:25.08 | *** join/#openzaurus kolla_ (kolla@firda.uninett.no) |
| 08:39.23 | *** join/#openzaurus __law__ (~law@mail.stiftadmont.at) |
| 08:52.20 | alan_ | i'm having a look at the map file. what do the "compose" lines refer to ? |
| 08:54.52 | *** join/#openzaurus hrw|work (szczepan@blue.stone.pl) |
| 09:02.32 | VladDrac | who's in charge of openzaurus.org? |
| 09:02.47 | VladDrac | wouldn't it be usefull to print the date along with the time below the newsitems? :) |
| 09:02.59 | VladDrac | ah wait, it's printed on top |
| 09:10.45 | VladDrac | http://moon.google.com/ <- lol :) |
| 09:11.34 | VladDrac | (zoom in entirely :) |
| 09:11.36 | alan_ | excellent ! btw, it's man on the moon birthday !! |
| 09:12.09 | alan_ | \o/ |
| 09:14.23 | hrw|work | nice |
| 09:27.07 | alan_ | VladDrac: do you know this one ? http://www.kamazutra.be/ozone2 |
| 09:30.01 | VladDrac | yeah seen it :) |
| 09:30.53 | alan_ | VladDrac: all the site has to be seen, anyway. |
| 09:31.43 | alan_ | VladDrac: my very favorite one : http://www.kamazutra.be/nintendo |
| 09:32.15 | alan_ | XorA: i hope you know this one too :D |
| 09:40.28 | VladDrac | too bad I only know mario :) |
| 09:41.23 | hrw|work | heh.. windoze users |
| 09:48.38 | __law__ | ppp doesnt work for me with the current oz kernel (2.6.12-mm1) but if i include ppp stuff direct into the kernel (no modules) all works fine |
| 09:51.29 | XorA | alan_: wassup? |
| 09:54.27 | __law__ | should i release my defconfig-c7x0 ? |
| 09:55.36 | alan_ | XorA: did you see this : http://www.kamazutra.be/nintendo |
| 09:58.42 | alan_ | hrw|work: "mplayer http://users.skynet.be/fa543037/nintendo.wmv" |
| 09:59.09 | XorA | alan_: wierd |
| 09:59.26 | alan_ | XorA: i loooooooooooooooooove it ! |
| 10:00.01 | alan_ | XorA: lemme guess : you had a megadrive when you were kid... |
| 10:01.23 | hrw|work | hardcore :) |
| 10:01.49 | hrw|work | alan_: original nintendo/famicon or clone? |
| 10:02.04 | alan_ | original !! |
| 10:02.54 | hrw|work | my brother has a clone 'pegasus' |
| 10:03.13 | alan_ | pegasus ? i don't know that.. |
| 10:04.00 | hrw|work | pegasus is most popular NES clone in CE Europe |
| 10:04.29 | alan_ | hrw|work: i don't think they ever sold this in france... |
| 10:06.22 | XorA | its those dodgy russian guys and their better than original clones |
| 10:06.39 | alan_ | hehe ^^ |
| 10:17.41 | alan_ | hrw|work: when you want to edit your keymapping, it's "keycode [keycode#] = [normal] [WithShift] [WithAltGr] [WithWhat?]" right ? |
| 10:18.53 | hrw|work | alan_: look into /etc/corgi_keymap |
| 10:24.12 | alan_ | hrw|work: that is what i di, and that is why i'm puzzled. there are some lines i don't understand. for example, "keycode 2 = one exclam |
| 10:24.12 | alan_ | <PROTECTED> |
| 10:24.58 | hrw|work | keycode 2 = one (alone) exclam (with shift) |
| 10:25.10 | hrw|work | and its Console_1 (with ctrl+alt) |
| 10:26.34 | alan_ | hoooooo... now i understand... sorry for my stupidity. ^^' |
| 10:29.26 | hrw|work | np |
| 10:29.55 | *** join/#openzaurus baldurk (~baldurk@user-13-193-151-83.e7even.com) |
| 10:58.34 | alan_ | YEAAAAH !!i now have all thje accents i need, even in italic in Abiword working on a stable openzaurus GPE with a great mplayer !!!!! |
| 10:59.12 | alan_ | all i want now is snes9x... |
| 11:32.21 | *** join/#openzaurus baldurk (~baldurk@user-13-193-151-83.e7even.com) |
| 12:21.55 | *** join/#openzaurus StarScream (~am@217.169.25.114) |
| 12:30.15 | *** join/#openzaurus maz (~maz@b59.tum.vpn.lrz-muenchen.de) |
| 12:39.23 | *** join/#openzaurus marcan (1337@82.Red-83-53-2.pooles.rima-tde.net) |
| 12:39.38 | hrw|work | someone with collie here? |
| 12:42.14 | *** join/#openzaurus mrz80 (1000@caledonia.cns.ufl.edu) |
| 12:44.41 | cosmo- | hrw|work: yep |
| 12:49.53 | StarScream | hrw|work: yep |
| 12:50.16 | StarScream | hrw|work: well its at home but i can test it in 4 hours time |
| 12:50.35 | StarScream | hrw|work: mine is one of the ones that wont boot the new kernel also |
| 13:18.07 | hrw|work | ok |
| 13:18.23 | hrw|work | I can provide bootstrap image with r21 kernel |
| 13:21.17 | StarScream | hrw|work: cool... |
| 13:21.21 | StarScream | link? |
| 13:22.11 | hrw|work | first I have to upload them |
| 13:22.25 | hrw|work | it will take ~10 minutes |
| 13:22.41 | StarScream | ok cool. Let me know when its done and i'll do it first thing when i get home |
| 13:27.37 | hrw|work | StarScream: http://www.hrw.one.pl/tmp/oz353-r21/ - bootstrap and kernel 64-0 r21 |
| 13:27.45 | StarScream | cheers |
| 13:27.49 | hrw|work | can you flash them both and tell does it work as should? |
| 13:28.07 | StarScream | hrw|work: no probs. |
| 13:28.23 | hrw|work | later I probably will provide rebuilt of opie-image/3.5.3 |
| 13:29.47 | StarScream | hrw|work: k |
| 13:34.35 | alan_ | hrw|work: libx11-6 is in the oz feed, but the version number doesn't meet requirements... i'd like to build it myself, but i don't know how... |
| 13:34.58 | alan_ | anyway, i still don't understand what make snes9x not work... |
| 13:36.34 | XorA | alan_: does one in my feed match reqs? |
| 13:39.26 | hrw|work | StarScream: you use opie or gpe? |
| 13:39.57 | StarScream | hrw|work: opie but to be honest i'll use anything that works. my zaurus is sitting at home being a paper weight at the moment :) |
| 13:40.11 | hrw|work | aha |
| 13:40.34 | hrw|work | StarScream: I will build opie-image with libqte r12 - r14 is in upgrades |
| 13:41.11 | StarScream | hrw|work: so should i still use that link above? |
| 13:41.33 | hrw|work | yes |
| 13:41.39 | StarScream | ok. :) |
| 13:42.08 | hrw|work | StarScream: I just want to rebuild oz 3.5.3 bootstrap and opie images so they will work with r21 kernel out-of-box |
| 13:42.27 | hrw|work | gpe-image probably will follow |
| 13:42.49 | StarScream | ah right. |
| 13:43.00 | alan_ | XorA: your feed is down :( |
| 13:43.06 | XorA | alan_: its not |
| 13:43.55 | alan_ | ... mmm... well it's back... what happened to my opera... |
| 13:44.16 | XorA | your opera? |
| 13:44.28 | XorA | alan_: turned feed back on 9am BST |
| 13:44.40 | alan_ | opera my web browser... |
| 13:45.46 | XorA | it sucks |
| 13:46.36 | alan_ | i like it. it's fast, it has a good cache system, i like the mail client. |
| 13:47.07 | alan_ | AND my wife can use it without me ^^ |
| 13:47.15 | XorA | I tought mine firefox |
| 13:47.28 | XorA | and she even made her mum use firefox |
| 13:47.28 | alan_ | yours is teachable ^^ |
| 13:47.57 | XorA | alan_: need a better paddle then :-) |
| 13:49.29 | alan_ | ^^ |
| 13:55.18 | XorA | oh alan_ got my rxvt to change font |
| 13:58.01 | alan_ | hhaa ? tell me more |
| 13:58.25 | XorA | vi .Xdefaults /home/alan/.Xdefaults or something like that |
| 13:58.41 | XorA | change line to Rxvt*font: xft:Sans Mono:style=Bold:pixelsize=9 |
| 13:58.56 | XorA | save, log out of gpe, log back in, rxvt is using readable font again |
| 14:01.49 | alan_ | mmmm... it's readable, but letter are spaced... |
| 14:03.59 | XorA | alan_: did you install all dejavu files? |
| 14:04.07 | alan_ | yep. |
| 14:05.01 | alan_ | ... mmm in fact it is the same font as before... |
| 14:05.22 | alan_ | it is a dejavu font, i'd say... |
| 14:05.38 | XorA | well that sets it to a properly spaced mono font for me |
| 14:07.05 | alan_ | trying with a reboot... |
| 14:07.58 | jnc | you can change the rxvt font that way, what about the colours? |
| 14:08.31 | jnc | i used an .Xdefaults from my desktop machine, which works for the colours, and on the Zaurus (OZ) it complains about colours not being found |
| 14:08.59 | alan_ | what colour did you use ? |
| 14:09.24 | jnc | well, lots of them |
| 14:09.33 | jnc | hang on i am going to find my .Xdefaults i used |
| 14:09.47 | XorA | jnc: rgb.txt doesnt exist on OZ |
| 14:09.57 | jnc | oh! |
| 14:10.01 | jnc | that must be why |
| 14:11.19 | jnc | alan_: http://phpfi.com/70726 |
| 14:11.24 | jnc | my ~/.Xdefaults |
| 14:13.00 | alan_ | would it work with color names ? (not code) |
| 14:15.19 | alan_ | XorA: i installed your snes9x with deps, but it still won't work... |
| 14:15.27 | XorA | alan_: :-( |
| 14:15.44 | alan_ | i'm puzzled... |
| 14:15.54 | jnc | hmm i don't know |
| 14:16.06 | jnc | i don't have OZ on my c3000 currently |
| 14:16.18 | jnc | i restored my c3k with the Sharp ROM |
| 14:16.47 | jnc | i'm looking for a way to keep the Sharp ROM and add a bootloader that lets me select Sharp ROM or the OpenZaurus |
| 14:16.59 | hrw|work | jnc: altboot? |
| 14:17.05 | jnc | i could try that |
| 14:17.11 | jnc | does it let you use different kernels? |
| 14:17.34 | jnc | i asked CoreDump how altboot worked, he didn't respond |
| 14:17.43 | jnc | not sure exactly how it works |
| 14:17.52 | hrw|work | jnc: zaurus bootloader does not allow kernel switching |
| 14:18.19 | jnc | altboot does? |
| 14:18.31 | hrw|work | no - it allow to use misc systems |
| 14:19.35 | jnc | oh |
| 14:19.40 | jnc | so how would i switch kernels? |
| 14:20.06 | hrw|work | no way on Z |
| 14:20.08 | jnc | i think OpenBSD does it |
| 14:20.15 | CoreDump|home | hey |
| 14:20.24 | hrw|work | jnc: so look how they did it |
| 14:20.49 | jnc | CoreDump|home: hi |
| 14:21.02 | jnc | trying to come up with an idea for how to change kernels |
| 14:21.14 | jnc | i.e. boot a kernel from somewhere other than flash |
| 14:21.40 | jnc | maybe using the Z's Sharp Kernel or a modified version of it to bootstrap |
| 14:21.46 | CoreDump|home | you can't AFAIK. Your boot-loader needs support for that - it doesn't |
| 14:23.17 | XorA | CoreDump|home: technically you could do it by loading a module that loaded the new kernel then jumped to the entry point |
| 14:23.49 | hrw|work | openbsd guys boot linux, modprobe own kernel module, run own binary which load openbsd kernel and boot it |
| 14:24.04 | jnc | that would do the trick |
| 14:24.05 | hrw|work | ftp://ftp.openbsd.org/pub/OpenBSD/3.7/zaurus/INSTALL.zaurus |
| 14:24.09 | CoreDump|home | sounds interesting |
| 14:24.22 | XorA | there is even a pr-rolled module for linux to load linux somewhere |
| 14:25.13 | *** join/#openzaurus synth (~cb@pcp838545pcs.venice01.fl.comcast.net) |
| 14:25.24 | CoreDump|home | having something like this would rock for dual-boot. |
| 14:25.46 | jnc | it would allow us to test 2.6.x kernels and other developments without fear of bricking the Z |
| 14:25.50 | CoreDump|home | you could actually boot sharp off of an SD/CD card |
| 14:25.59 | jnc | :) |
| 14:27.20 | XorA | CoreDump|home: your init will always need to the in flash on collie |
| 14:27.44 | CoreDump|home | right, not much of a problem though |
| 14:30.39 | jnc | kexec? |
| 14:32.59 | hrw|work | jnc: zaurus other then collie cannot be bricked |
| 14:34.09 | jnc | http://www.cwlinux.com/downloads/kexec/linux-2.4.19-lb-kexec.patch |
| 14:34.22 | jnc | what's so special about collie? |
| 14:34.47 | hrw|work | jnc: collie does not have 2nd (non-flashable) kernel used by flasher |
| 14:35.17 | jnc | ah |
| 14:35.46 | jnc | do you know if it is possible to wipe out the service menu on a spitz (c3000)? |
| 14:36.40 | hrw|work | many people say that it is not (atleast with OZ flashing script) |
| 14:36.50 | CoreDump|home | hrw|work: I was under the impression that flashing on collie is done by the boot-manager. If you don't touch it, you shouldn't be able tobrick a collie |
| 14:37.12 | jnc | okay |
| 14:37.25 | jnc | that 2.4.x diff i posted the URL for, is alpha arch |
| 14:37.27 | CoreDump|home | (i haved flashed b0rked / unbootable kernels many times |
| 14:37.29 | jnc | not x86 :( |
| 14:39.23 | jnc | oh hey here it is |
| 14:39.24 | jnc | http://sourceforge.net/projects/monte/ |
| 14:39.34 | jnc | load a kernel module and boot to the loaded kernel |
| 14:39.44 | jnc | "two kernel monte" |
| 14:41.40 | hrw|work | jnc: will you add it into 2.4.18/2.4.20 embedix kernels? |
| 14:42.11 | jnc | will *i* add it? |
| 14:42.37 | jnc | maybe we can get JustinP to do it |
| 14:42.40 | hrw|work | most of OZ devels does not want to even touch it with long stick |
| 14:43.17 | CoreDump|home | :) |
| 14:43.47 | hrw|work | if someone want something in embedix kernel in OZ then (s)he has to do it and send us patches (with good infos why we should look at it) |
| 14:44.25 | jnc | i don't have a build environment for this stuff |
| 14:44.36 | hrw|work | CoreDump|home: flash sharprom OSPACK on collie - if it fail then you can get a brick as whole flash is flashed |
| 14:45.08 | jnc | i'd be happy to come up with a written explanation as to why this is super important to get working |
| 14:45.56 | CoreDump|home | hrw|work: sharp overwrites the boot-loader |
| 14:46.00 | jnc | there's two pieces, one is a kernel module, the other is a userspace client |
| 14:46.38 | hrw|work | CoreDump|home: so collie can be bricked |
| 14:46.47 | jnc | in theory, on the c3000 at least, we could test this without flashing anything |
| 14:47.28 | CoreDump|home | hrw|work: not with OZ :) Who cares for sharp anyways heh |
| 14:48.24 | hrw|work | CoreDump|home: not me anyway - but this does not change situation that collie can be bricked ;) |
| 14:48.51 | CoreDump|home | point taken ;) |
| 14:50.33 | jnc | yikes |
| 14:50.56 | jnc | who's got a build environment for the sharp kernel on spitz? |
| 14:51.11 | hrw|work | time to go - cu |
| 14:51.38 | jnc | copper yourself |
| 14:51.40 | CoreDump|home | bye hrw|gone |
| 14:54.29 | jnc | hmm |
| 14:54.43 | jnc | where would i look, to find someone with the build environment for c3000 sharp rom? |
| 14:55.57 | XorA | jnc: pdaXrom SDK? |
| 14:59.54 | jnc | XorA: maybe... i will try it |
| 15:01.27 | jnc | XorA: i don't see an SDK download for the cxk0 |
| 15:02.49 | jnc | i see something called softfloat sdk |
| 15:02.50 | jnc | hmm |
| 15:16.31 | *** join/#openzaurus mithro (~tim@lester.mithis.com) |
| 15:20.58 | *** join/#openzaurus Exis (~Exis@Exis.active.supporter.pdpc) |
| 15:27.27 | jnc | more hmm'ing |
| 15:31.37 | *** join/#openzaurus enno_ (enno@A09b4.a.pppool.de) |
| 15:32.12 | enno_ | hi |
| 15:32.54 | VladDrac | hi enno |
| 15:33.04 | enno_ | i have a problem with my sd card slot on zaurus c860. dont know how to check this. maybe its only a software problem. but maybe its broken |
| 15:33.41 | enno_ | cardctl status did not recognize the card -> no card |
| 15:34.14 | enno_ | my pc card reader has no problem with the card |
| 15:34.25 | jnc | hey, any of you guys ARM experts? |
| 15:34.33 | enno_ | any hints? |
| 15:34.59 | jnc | enno_: try booting with card out, then insert card after finished booting |
| 15:35.22 | enno_ | jnc: ok, just wait a second |
| 15:35.35 | *** join/#openzaurus alan__ (~alan@ARouen-152-1-66-66.w83-202.abo.wanadoo.fr) |
| 15:35.50 | jnc | i need to know (in a nutshell) what the boot process is for an arm kernel and the initrd |
| 15:39.22 | enno_ | jnc: status is same as before :( |
| 15:40.39 | urs | Is sd really handeld by cardctl? On my 5500, it doesn't show up at all. (but works fine) |
| 15:41.14 | *** join/#openzaurus mithro (~tim@lester.mithis.com) |
| 15:42.46 | enno_ | urs: dont know. but i guess |
| 15:48.59 | enno_ | but i should see a sd card under /proc/ide i guess |
| 15:53.52 | *** join/#openzaurus hufnus (~slonsiki@m581836d0.tmodns.net) |
| 15:54.36 | enno_ | well i google |
| 15:54.58 | *** join/#openzaurus mithro (~tim@lester.mithis.com) |
| 16:27.17 | JustinP | jnc: I'm not a kernel dev. I did a little device driver stuff in college, but it was for class. I cna *try* to get something working in the kernel but I could easily screw it up.... |
| 16:27.48 | JustinP | jnc: I had gcc and the tools working on the Sharp ROM, but it wasn't really a kernel dev environment....then again maybe it *would* compile a kernel module...not sure |
| 16:27.56 | jnc | hmm |
| 16:28.11 | jnc | well it looks like this thing does not have userspace client code for arm |
| 16:28.14 | jnc | only alpha and i386 |
| 16:28.27 | jnc | code would need to be written to support arm |
| 16:28.31 | JustinP | jnc: also, where did you find that module? I don't see it on the sf.net page. There are no released files. |
| 16:28.38 | jnc | JustinP: CVS |
| 16:29.02 | JustinP | oh fun....yeah, I'm not much of an ASM developer... |
| 16:35.13 | *** join/#openzaurus baldurk (~baldurk@user-13-193-151-83.e7even.com) |
| 16:40.03 | jnc | JustinP: the code is all in C i think |
| 16:46.01 | *** join/#openzaurus Timelord (~TL@4.78.4.43) |
| 16:49.06 | *** join/#openzaurus Virusmaster (~Thomas@p549CC198.dip.t-dialin.net) |
| 16:56.29 | *** join/#openzaurus alan_ (~alan@ARouen-152-1-29-146.w83-115.abo.wanadoo.fr) |
| 17:01.48 | alan_ | exit |
| 17:02.01 | alan_ | mmmmm... wrong window... |
| 17:02.10 | *** join/#openzaurus [cc]smart (~smart@gw.ptr-62-65-149-158.customer.ch.netstream.com) |
| 17:07.49 | *** join/#openzaurus bisho (~bisho@136.Red-213-97-191.pooles.rima-tde.net) |
| 17:19.01 | *** join/#openzaurus Slackman (~am@81-178-226-73.dsl.pipex.com) |
| 17:28.19 | *** join/#openzaurus sandman (~s@CPE-67-48-249-37.new.res.rr.com) |
| 18:06.52 | Slackman | anyone have hrw's email address? |
| 18:07.15 | Slackman | hrw|gone: tried your kernel. Yes it works!! |
| 18:07.36 | Slackman | hrw|gone: and it sleeps and wakes up ok. |
| 18:15.31 | *** join/#openzaurus TES (~TES@81.180.159.1) |
| 18:22.22 | *** join/#openzaurus incinerator (~incinerat@82-41-24-164.cable.ubr04.edin.blueyonder.co.uk) |
| 19:00.33 | *** join/#openzaurus hufnus (~slonsiki@m461636d0.tmodns.net) |
| 19:04.44 | *** join/#openzaurus tsm (~tsm@200.223.241.122) |
| 19:05.44 | *** join/#openzaurus tsm (~tsm@200.223.241.122) |
| 19:17.38 | *** join/#openzaurus tsm (~root@200.223.241.122) |
| 19:43.18 | *** join/#openzaurus tsm (~thiago@200.254.144.56) |
| 19:43.25 | sandman | Anyone alive? |
| 19:43.32 | tsm | Hi |
| 19:43.45 | sandman | What's a good linux program to sync with a zaurus sl-5600? |
| 19:43.50 | sandman | I haven't installed openzaurus yet |
| 19:44.58 | tsm | I don�t use any. I sync exporting calendar/contacts to vcf format and then I open it on kde pim apps. |
| 19:45.26 | tsm | I do this because I sync it with my Nokia 6600 phone too. |
| 19:45.28 | sandman | exporting to vcf? |
| 19:46.16 | tsm | I do this using OpenZaurus. I dhave never used the stock sharp rom. My device is SL 5500. |
| 19:47.12 | sandman | How did you install openzaurus if you couldn't sync it, then? |
| 19:47.46 | sandman | I cannot get my zaurus to communicate with my system |
| 19:49.22 | tsm | When I recived my Zaurus I imediatly installed OZ. I had nothing to sync |
| 19:49.57 | tsm | What is your distro? |
| 19:50.01 | sandman | How did you install OZ without having it connected to your computer? |
| 19:50.03 | sandman | Gentoo |
| 19:50.31 | tsm | You don´t have to conect the Zaurus to your computer do Flash another ROM. |
| 19:51.07 | tsm | You need a CF card and a CF card reader. |
| 19:51.18 | sandman | I can't use an SD card? |
| 19:51.38 | sandman | I don't have a CF card |
| 19:51.48 | tsm | To flash another ROM ... No. You must use a CF card. |
| 19:52.04 | tsm | At least on SL5500 there is no way to flash using the SD card. |
| 19:52.04 | sandman | How large must the card be? |
| 19:52.12 | sandman | This is a 5600 |
| 19:52.15 | sandman | SL-5600 |
| 19:52.57 | tsm | I don´t know about flashing using SD on 5600, but i am almost certain that is not possile to flash it using SD. |
| 19:53.57 | tsm | I use a 128MB CF card, but I think that 32 MB is the minimum. |
| 19:55.21 | sandman | One can get 6 GB microdrives now |
| 19:55.24 | sandman | That are that size. |
| 19:55.32 | sandman | That's pretty damn big for a PDA |
| 19:55.37 | tsm | The Kernel image is about 900K and the root disk image is about 14MB. |
| 19:55.49 | tsm | It is very big. |
| 19:56.12 | tsm | It is nice to use it as an MP3/OGG player. |
| 19:56.30 | tsm | Or to put some ripped movies on it. |
| 19:56.30 | sandman | Or to install a debian chroot on and do software development :) |
| 19:56.54 | tsm | I don´t develop :( |
| 19:57.30 | sandman | question |
| 19:57.40 | sandman | couldn't I just use opera and wifi to put the files on the CF card? |
| 19:57.44 | sandman | Do I even really need a computer to do it? |
| 19:57.53 | sandman | sl5600 has wifi |
| 19:57.55 | tsm | Shure you can. |
| 19:58.08 | tsm | Just download the files on the CF card. |
| 19:58.22 | sandman | I think I'm in love with this zaurus |
| 19:59.04 | tsm | I have a CF card Wi-fi, so I must download things on the SD, them copy to the CF if I want to do everything on it. |
| 19:59.28 | tsm | I use konqueror embedded on OpenZaurus 3.5.3 |
| 19:59.32 | tsm | :) |
| 20:00.36 | tsm | My zaurus is mainly used to do some wi-fi signal tests, security wi-fi tests and as a mp3/ogg and snes9x (snes emulator). |
| 20:01.00 | tsm | Actualy it is the first time I enter here. :) |
| 20:01.23 | tsm | Actualy, it is the first time I enter on a IRC channel since 1999. |
| 20:01.46 | tsm | I am looking for some help to make xmame work on SL5500. |
| 20:02.57 | tsm | How long do you own your Zaurus? |
| 20:05.25 | sandman | I've had it for 30 minutes now |
| 20:05.40 | sandman | xmame == emulator, yes? |
| 20:05.46 | sandman | Have you compiled it yourself yet? |
| 20:06.07 | sandman | I intend to do absolutely everything on this zaurus. |
| 20:06.16 | sandman | And later I will purchase an OQO (oqo.com) |
| 20:07.21 | sandman | I'll bbiab |
| 20:10.36 | tsm | You will find lots of info on www.zaurususergroup.org |
| 20:11.35 | tsm | There is a forum (http://www.oesf.org/forums/) where the discussions usually take place. |
| 20:12.04 | tsm | There are some few ROMS other then Sharp and OpenZaurus for your 5600. |
| 20:16.12 | tsm | names |
| 20:17.31 | tsm | Yes. xmame is an emulator. |
| 20:19.13 | tsm | Anyone here know if there is any way to make xmame work on 5500? I get the libpng error: Invalid bit depth |
| 20:20.04 | tsm | Then xmame asks if it was compiled to the right arch. |
| 20:20.36 | tsm | I am using Hentges ROM (OS 3.5.3) with the new r21 kernel on a SL5500. |
| 20:20.40 | tsm | Anyone? |
| 20:22.06 | tsm | I can´t find any information about it on oesf.org forums. On the OpenEmbedded list I only find information about a patch to compile mame 0.95. |
| 20:35.02 | tsm | help |
| 20:40.01 | *** join/#openzaurus Shdwdrgn (Picard@sourpuss.net) |
| 20:45.16 | CoreDump|home | tsm: sorry, no idea |
| 20:52.46 | hrw|gone | for brave collie users: http://www.hrw.one.pl/tmp/oz353-r21/ will contain (few minutes to upload) OZ 3.5.3 bootstrap and opie images with -r21 kernel. they will probably work OK but are not tested yet on any device. If someone find a problem please give me an info (via msg here or privmsg). dont put that URL in any forums as they are temporary and after testing if they work they will be put in 3.5.3 upgrades. |
| 20:53.28 | urs | great |
| 20:53.46 | urs | Are those only initrd's, or ipkgs? |
| 20:53.52 | tsm | Very good hrw |
| 20:54.46 | hrw|gone | urs: do I said something not clear? TEST only, IMAGES with KERNEL |
| 20:54.49 | hrw|gone | bye |
| 20:54.55 | urs | ok, sorry |
| 21:07.20 | *** join/#openzaurus benplaut (~benplaut@cpe-66-8-184-56.hawaii.res.rr.com) |
| 21:16.58 | *** join/#openzaurus Slackman (~am@81-178-226-73.dsl.pipex.com) |
| 21:57.17 | *** join/#openzaurus Virusmaster (~Thomas@p549CC198.dip.t-dialin.net) |
| 22:12.56 | *** join/#openzaurus Timelord (~TL@4.78.4.43) |
| 22:16.35 | *** join/#openzaurus benplaut (~benplaut@cpe-66-8-184-56.hawaii.res.rr.com) |
| 22:49.02 | *** join/#openzaurus darkschneider (~gab@213-140-6-96.fastres.net) |
| 23:09.06 | *** join/#openzaurus Exis (~Exis@Exis.active.supporter.pdpc) |
| 23:15.21 | *** join/#openzaurus synth (~cb@pcp838545pcs.venice01.fl.comcast.net) |
| 23:29.10 | *** join/#openzaurus hufnus (~slonsiki@mf83f36d0.tmodns.net) |