00:01.16 | kados | hmmm ... now none of them are working |
00:03.00 | kados | maybe I should reboot |
00:03.07 | kados | it is reporting: |
00:03.14 | kados | No CFXGA card |
00:03.21 | kados | No CFXGA card |
00:03.25 | hrw | ;( |
00:03.25 | kados | (three times) |
00:06.25 | kados | before it stopped working 041 was the best |
00:06.29 | kados | 042 didn't work |
00:06.30 | hrw | 050 available - show this only once |
00:06.34 | kados | 043 was just blank |
00:06.57 | kados | zaurus rebooting |
00:07.05 | hrw | look at 050 - should be same as 041 |
00:07.08 | kados | ok |
00:09.10 | kados | hrw: exits with no output |
00:09.22 | kados | hrw: (monitor screen is orange not green) |
00:09.41 | kados | wait ... |
00:09.41 | kados | forgot params |
00:09.58 | kados | same exact as 41 |
00:10.15 | kados | from 12:00a to 7:00p is visible |
00:10.26 | hrw | can you run 'scap' on Z so I will see how it look on Z? |
00:12.35 | hrw | http://ewi546.ewi.utwente.nl/tmp/hrw/cfxga/scap.png is what you have on Z? |
00:14.19 | kados | screenshot was uploaded? |
00:14.25 | kados | does it automatically upload? |
00:14.45 | hrw | no - I did it from my c760 |
00:15.08 | kados | I ran scap and it says: |
00:15.20 | kados | uploaded to handheads.org |
00:15.29 | kados | handhelds.org I mean |
00:15.42 | kados | can you view it there? |
00:17.11 | kados | hrw: ? |
00:17.25 | hrw | handhelds.org scap service is fscked |
00:18.32 | kados | k ... I'll save locally and put on my website |
00:20.33 | hrw | http://ewi546.ewi.utwente.nl/tmp/hrw/cfxga/scap.png - look at it once more |
00:20.41 | kados | hrw: http://kados.org/ss.png |
00:20.55 | hrw | when you use 050 or 041 you got only non-green part on cfxga monitor? |
00:21.42 | kados | hrw: check my screenshot ... I get from 12:00a to 7:00p |
00:22.00 | kados | hrw: (top of 12:00 to bottom of 7:00p) |
00:22.31 | kados | hrw: top if 12:00 is flush with top of monitor |
00:22.38 | kados | hrw: top of I mean |
00:22.57 | hrw | ok. so only 480x480 is visible |
00:23.04 | kados | hrw: bottom of 7:00 is about 3 inches from bottom of monitor and below it is black |
00:23.11 | hrw | just like I though |
00:23.24 | hrw | does it is rotated or not? |
00:23.37 | kados | not rotated |
00:23.59 | kados | it is square so you're probably right abotu 480x480 |
00:24.05 | hrw | just checked in gimp |
00:24.17 | kados | resolution is nice and clean |
00:24.21 | kados | looks great! |
00:24.31 | kados | if only I could see the whole screen :-) |
00:24.37 | hrw | tried other mode then 0? |
00:24.51 | hrw | 0-3 should work on VGA |
00:24.53 | kados | 0 and 3 are identical |
00:25.27 | kados | 0-4 are identical |
00:25.39 | hrw | 0-4 as 0,1,2,3,4? |
00:25.50 | kados | yes |
00:25.52 | kados | add 5, 6 |
00:26.02 | kados | 7 too |
00:26.14 | kados | I suspect all modes are identical :-) |
00:26.43 | hrw | try cfxga-util --mode X --display-off --mirror |
00:26.54 | hrw | where X is 0-3 |
00:27.38 | hrw | btw - this version will rather not work correctly on collie :) |
00:28.21 | kados | ok |
00:29.04 | kados | identical as before |
00:29.09 | kados | ./cfxga-util-050 --mode 3 --display-off --mirror |
00:29.18 | hrw | ok |
00:29.22 | hrw | just wanted to check |
00:29.26 | kados | 0-3 identical as before |
00:30.08 | kados | btw: refresh rate is not too bad |
00:30.13 | hrw | does it correctly refresh? |
00:30.21 | kados | about 1/4 second or so |
00:30.32 | hrw | now it is set to 1s rather |
00:30.36 | kados | ahh |
00:32.39 | hrw | 050a segfaults? |
00:34.10 | hrw | ? |
00:34.25 | kados | no ... |
00:34.30 | kados | still 480x480 |
00:34.34 | hrw | ok. |
00:34.38 | kados | but now we have the offset prob again |
00:34.42 | hrw | does cfxgamirror works ok? |
00:34.49 | kados | screen split in 3 columns now |
00:34.54 | kados | wait ... |
00:34.55 | hrw | ignore that |
00:34.59 | kados | it is the full screen |
00:35.16 | kados | no ... not the full screen |
00:35.21 | kados | but almost |
00:35.45 | hrw | cfxgamirror show 480x640 or nearly that? |
00:35.48 | kados | still mising the top |
00:35.59 | kados | cfxgamirror? |
00:36.24 | hrw | cfxgamirror from http://ewi546.ewi.utwente.nl/tmp/hrw/cfxga/cfxga-tools_1.0-r0_arm.ipk package |
00:36.32 | hrw | you tried it yesterday iirc |
00:36.47 | kados | right |
00:36.59 | kados | very small output for that |
00:37.14 | kados | maybe 150x260 or something |
00:37.20 | kados | same size as zarusu screen in fact |
00:37.20 | hrw | ok. found in backlog: unreadable and side_ways |
00:37.26 | kados | but sideways |
00:37.37 | hrw | ok so my way is better |
00:37.46 | kados | _much_ better |
00:38.01 | kados | _soooo much_ better :-) |
00:38.18 | hrw | try 050b |
00:38.41 | hrw | 480x800 hack... |
00:38.49 | kados | Segmentation fault |
00:38.54 | hrw | ok as expected |
00:39.19 | kados | now I must reboot :-) |
00:39.47 | hrw | 050c - hack in other way |
00:40.36 | hrw | btw - which timezone you are? GMT-Y where Y is... |
00:40.45 | hrw | GMT+1 here (01:40) |
00:41.02 | kados | MGT - 5 |
00:41.05 | kados | GMT even |
00:41.10 | hrw | 18:40 at you? |
00:41.40 | kados | 19:40 |
00:42.27 | hrw | 6h difference |
00:42.39 | hrw | too bad.. |
00:43.20 | kados | ok ... |
00:43.34 | kados | now screen shows from 4:00a to 7:00p |
00:43.39 | hrw | 050c segfaults? |
00:43.42 | kados | (refer to screenshot) |
00:43.45 | kados | no segfault |
00:43.51 | kados | ./cfxga-util-050c --mode 3 --mirror |
00:44.11 | kados | I think it's still 480x480 |
00:44.14 | hrw | so 1/2 of screen: from 1/4 to 3/4 |
00:44.20 | kados | though width seems slightly different |
00:44.31 | kados | no ... from 3/4 to 1/4 I think |
00:44.45 | kados | less of the screen is showing in 050c than in 050a |
00:44.53 | hrw | ok expected |
00:45.37 | *** join/#openzaurus ugarit (n=ugarit@216-15-34-7.c3-0.129-ubr3.lnh-129.md.cable.rcn.com) |
00:57.40 | hrw | kados: try 051 |
00:58.01 | hrw | it will segfault or work |
00:59.22 | kados | setfault |
00:59.34 | hrw | ok |
01:01.40 | hrw | 052 |
01:02.17 | *** join/#openzaurus simcop2387 (n=simcop23@p3m/member/simcop2387) |
01:02.42 | simcop2387 | alright a release date is set? |
01:03.06 | hrw | "3.5.4 expected on 2006.03.20" is in topic |
01:03.43 | kados | hrw: back to 12:00am to 7:00pm and 480x480 |
01:03.52 | hrw | kados: :( |
01:04.27 | kados | same with modes 0-3 |
01:04.39 | hrw | ok. |
01:04.53 | *** join/#openzaurus DNAfanboy (n=cesar@201-34-198-211.bsaco700.dsl.brasiltelecom.net.br) |
01:06.53 | hrw | ok. time to sleep |
01:07.08 | hrw | kados: try to get photo... |
01:07.30 | kados | ok ... I will |
01:07.32 | kados | hrw: thanks ! |
01:10.37 | hrw | cu all |
01:11.00 | hrw | that cfxga is easy hacking with not-easy problems ;) |
01:29.20 | *** join/#openzaurus s0ciopath (n=user@net34-155.netkaster.ca) |
01:33.54 | *** join/#openzaurus mithro (n=tim@lester.mithis.com) |
01:44.14 | *** join/#openzaurus zach (n=zach@c-24-17-252-226.hsd1.wa.comcast.net) |
01:44.52 | zach | Is it possible to build OZ from cygwin? I mean, will all the toolchains build and work? |
03:55.38 | *** join/#openzaurus champ (n=champ@216.85.238.67) |
03:55.47 | *** join/#openzaurus Shdwdrgn (i=Picard@sourpuss.net) |
04:03.27 | *** join/#openzaurus miskinis (n=miskinis@c-24-91-59-157.hsd1.ma.comcast.net) |
04:10.02 | *** join/#openzaurus mithro (n=tim@lester.mithis.com) |
04:14.30 | *** part/#openzaurus miskinis (n=miskinis@c-24-91-59-157.hsd1.ma.comcast.net) |
04:22.11 | *** join/#openzaurus Geo_KM (n=keith@ppp47-111.lns2.syd6.internode.on.net) |
04:30.44 | Timelord | Tagged but someone forgot to release it into the wild. :) |
04:51.01 | *** join/#openzaurus mithro (n=tim@lester.mithis.com) |
06:21.51 | *** join/#openzaurus yath__ (n=yath@p5495F7BF.dip.t-dialin.net) |
06:28.30 | *** join/#openzaurus _law_ (n=law@mail.stiftadmont.at) |
06:47.04 | *** join/#openzaurus Geo_KM (n=keith@ppp47-111.lns2.syd6.internode.on.net) |
07:43.07 | *** join/#openzaurus Timelord (n=TL@4.78.4.43) |
07:50.52 | *** join/#openzaurus Mardy (n=mardy@adsl-232-204.38-151.net24.it) |
07:56.37 | Mardy | hi all |
08:09.28 | *** join/#openzaurus JiniDog (n=jini@V91f8.v.pppool.de) |
08:27.01 | *** join/#openzaurus _guillermo (n=guillerm@dslb-084-062-174-203.pools.arcor-ip.net) |
08:28.57 | *** join/#openzaurus NAbyss (n=foo@220-253-39-50.VIC.netspace.net.au) |
08:43.10 | *** join/#openzaurus obergix[work] (n=olivier@inf-berger.int-evry.fr) |
08:51.07 | *** join/#openzaurus J (n=john@cpc2-mfld2-5-1-cust85.nott.cable.ntl.com) |
08:51.36 | *** part/#openzaurus J (n=john@cpc2-mfld2-5-1-cust85.nott.cable.ntl.com) |
09:01.31 | *** join/#openzaurus zinga (n=arnaudb@186.80-203-227.nextgentel.com) |
09:22.30 | *** join/#openzaurus pgas (n=user@dslcustomer-211-74.vivodi.gr) |
09:24.05 | *** join/#openzaurus Varoudis (n=Varoudis@athedsl-21249.otenet.gr) |
09:33.18 | *** join/#openzaurus geoalf (n=geoalf@terra15.sct.unipg.it) |
09:40.05 | *** join/#openzaurus s0ciopath (n=user@net34-155.netkaster.ca) |
09:40.36 | *** join/#openzaurus alan|home (n=alan@ARouen-152-1-69-214.w83-202.abo.wanadoo.fr) |
09:40.57 | alan|home | morniiiiiiing |
09:43.00 | XorA | hey alan|home |
09:48.26 | *** join/#openzaurus obergix[work] (n=olivier@157.159.190.30) |
10:02.20 | *** join/#openzaurus Shdwdrgn (i=Picard@sourpuss.net) |
10:22.53 | *** join/#openzaurus turro (n=pep@13.Red-88-3-222.staticIP.rima-tde.net) |
10:54.53 | *** join/#openzaurus eumel (n=chatzill@p548224C4.dip0.t-ipconnect.de) |
11:59.16 | *** join/#openzaurus JiniDog (n=jini@V965f.v.pppool.de) |
12:09.35 | *** join/#openzaurus s0ciopath (n=user@net34-155.netkaster.ca) |
12:38.41 | *** join/#openzaurus s0ciopath (n=user@net34-155.netkaster.ca) |
12:39.15 | *** join/#openzaurus FireEgl (i=Atlantic@Atlantica.US) |
12:42.59 | *** join/#openzaurus darkschneider (n=gab@213-140-6-96.ip.fastwebnet.it) |
12:55.25 | *** join/#openzaurus mithro (n=tim@lester.mithis.com) |
13:03.31 | *** join/#openzaurus obergix[work] (n=olivier@inf-berger.int-evry.fr) |
13:17.17 | *** join/#openzaurus incinerator (n=incinera@82-41-24-164.cable.ubr04.edin.blueyonder.co.uk) |
13:37.46 | *** join/#openzaurus DNAfanboy_wk (n=c8982bc5@can17.de) |
14:06.59 | ewano | happy st paddys day all |
14:07.16 | hrw|work | you too ewano |
14:07.34 | *** join/#openzaurus hwtechnik (n=hwtechni@80.78.239.70) |
14:07.55 | ewano | one of the few good things about living in .ie is that st paddy's day is a national holiday |
14:10.08 | hrw|work | ;) |
14:13.38 | *** join/#openzaurus hwtechnik (n=hwtechni@80.78.239.70) |
14:24.46 | *** join/#openzaurus Varoudis (n=Varoudis@athedsl-21249.otenet.gr) |
15:49.54 | *** part/#openzaurus FireEgl (i=Atlantic@Atlantica.US) |
15:52.06 | *** join/#openzaurus s0ciopath (n=user@net34-155.netkaster.ca) |
15:59.21 | hrw|work | ALL: OZ 3.5.4 built |
15:59.53 | XorA | yabadoo, well done hrw|work and cheers for all your work |
16:00.29 | hrw|work | ~hail mickeyl, OE devs, OZ testers and me |
16:00.31 | ibot | ACTION bows down to mickeyl, OE devs, OZ testers and me and chants, "I'M NOT WORTHY!!" |
16:02.27 | hrw|work | 1.9G of data |
16:10.50 | *** join/#openzaurus simcop2387 (n=simcop23@p3m/member/simcop2387) |
16:11.15 | *** join/#openzaurus _law_|iBook (n=_law_|iB@dsl-36-122.utaonline.at) |
16:11.33 | _law_|iBook | hi |
16:11.47 | hrw|work | hi law |
16:17.02 | _law_|iBook | hrw|work keylauch altgr patch is now also in :-) |
16:23.03 | prh | hrw|work: wow :O) |
16:34.55 | prh | what does that patch do? |
17:15.33 | *** join/#openzaurus mithro (n=tim@lester.mithis.com) |
17:52.27 | *** join/#openzaurus incinerator (n=incinera@82-41-24-164.cable.ubr04.edin.blueyonder.co.uk) |
18:39.59 | prh | hrw: so it's all built... when can we get our grubby mits on it? :O) |
18:44.12 | *** join/#openzaurus _guillermo (n=guillerm@dslb-084-062-174-208.pools.arcor-ip.net) |
18:48.47 | *** join/#openzaurus neil_m (n=voldemor@neilmathers.co.uk) |
18:48.48 | neil_m | sup |
18:51.39 | hrw | tomorrow or sunday |
18:52.19 | neil_m | what Z's do people have |
18:53.53 | hrw | people has all Z |
18:54.08 | neil_m | huh |
18:54.12 | prh | hrw: cool |
18:57.01 | hrw | first have to hand optimize feeds |
19:01.49 | [cc]smart | hrw: hi |
19:01.59 | hrw | hi [cc]smart |
19:02.07 | [cc]smart | optimze feeds.... optimize feeeds.... does it mean 3.5.4 is ready ? :) |
19:02.42 | hrw | yes |
19:02.49 | [cc]smart | wayy cool |
19:03.02 | [cc]smart | seems i've got a project for th weekend :) |
19:05.34 | hrw | 11091 packages |
19:07.19 | hrw | I'll try to build perl before release |
19:07.19 | prh | wow |
19:25.30 | pgas | hrw: upload the list of packages somewhere, for the impatient ;) |
19:26.01 | hrw | ;) |
19:27.23 | pgas | are you going to release something like a stable oe or something with the release? |
19:27.33 | hrw | http://ewi546.ewi.utwente.nl/tmp/hrw/t/oz354-packages-list.txt |
19:27.45 | hrw | I plan to |
19:31.09 | hrw | and cross-sdk |
19:31.58 | pgas | hey, I hope the maintainers of jasspa's micro-emacs have corrected the typo in the macros I had submitted :) |
19:32.17 | pgas | what no emacs! |
19:32.30 | pgas | Gnu Emacs |
19:32.37 | hrw | vim is not enough? |
19:32.50 | hrw | we provide OpenZaurus OS not Emacs OS |
19:33.02 | pgas | how do you irc without emacs? |
19:33.13 | hrw | pgas: add emacs into OE if you want it in OZ |
19:33.30 | pgas | hmm, emacs is not very cross-compile friendly |
19:34.16 | hrw | NOTE: package meta-sdk-1.0-r8: task do_populate_sdk: started |
19:34.17 | pgas | (it builds a small temacs, that uses himself to build emacs...) |
19:38.09 | *** join/#openzaurus s0ciopath (n=user@net34-155.netkaster.ca) |
19:39.47 | JustinP | yes, emacs is not very friendly to cross compilation....but maybe with some qemu/autotools magic.... |
19:39.57 | JustinP | and if you want it, I have an emacs ipk I built a while ago |
19:40.10 | JustinP | compiled *on* my zaurus....boy was that a long week |
19:40.56 | hrw | JustinP: we have to create kind of contrib feed for such things |
19:41.03 | pgas | JustinP: what z do you have??? |
19:41.16 | pgas | it takes far less than that on my 860 |
19:42.31 | pgas | it didn't take a week to compile no? |
19:42.44 | hrw | hmm.. feeds done, OE metadata archive created, now bitbake to archive.. |
19:45.17 | JustinP | hrw: would be nice.....I'd like to let people use the ipk, but it's...well....large and I don't have the hosting for such a thing |
19:46.29 | JustinP | pgas: I have a C3000. It took the better part of a day for the compile to finish. It wasn't a week. ;-) I had just spent a week or so trying to compile things and install the right packages... |
19:46.51 | hrw | JustinP: could you provide it to me? I will add it to oz354 |
19:47.50 | JustinP | hrw: sure. I haven't tested the ipk with 3.5.4, though :-/ Should still work fine, though. |
19:48.33 | hrw | JustinP: as long it is oz-unstable or oz-3.5.4-pre it should work |
19:50.46 | JustinP | hrw: eh....it wasn't built with OE. It was built with OE *packages* on my Z of course...I built it on 3.5.3 |
19:51.19 | hrw | JustinP: understood |
19:52.05 | JustinP | I also made 2 different package, one for emacs and one for the el files. The emacs packages has the compiled elc files |
19:52.35 | hrw | never pacakged emacs so you say magic to me |
19:52.58 | JustinP | I *should* break up the package so that most of the elc files are separated, but Idon't care enough to do that manually right now |
19:53.17 | JustinP | el == emacs lisp source, elc = emacs lisp byte-compiled |
19:53.21 | *** join/#openzaurus XorA|gon1 (n=dp@81-178-88-113.dsl.pipex.com) |
19:54.21 | pgas | JustinP: I have done something like that for the emacs packages here http://mail.pdaxrom.org/contrib/pgas/ |
19:54.30 | pgas | if it can be of some help.... |
19:54.31 | JustinP | BTW, this is also emacs from CVS....I had some issues with building the last packaged version at the time |
19:54.56 | pgas | xemacs is much better in this regard....pitty I use gnu emacs.. |
19:55.50 | hrw | oe-sdk-20060317204954.tar.bz2 - cross sdk |
19:56.10 | *** join/#openzaurus leira (n=leira@222.70.134.98) |
19:56.13 | JustinP | the separation looks useful....I just don't feel like doing it for this right now.... |
19:56.38 | pgas | JustinP: I completely understand :) |
19:57.02 | *** join/#openzaurus Bompo (n=Bompo@V2857.v.pppool.de) |
19:57.17 | hrw | Bompo: here I can say that OZ 3.5.4 is tomorrow or sunday |
19:57.39 | Bompo | thank you :P |
19:57.56 | JustinP | hrw: seems to work, although I ran out of space installing it ;-) it ran at least |
19:59.06 | hrw | JustinP: wow.. 9.5M package |
19:59.26 | hrw | quite big |
19:59.39 | JustinP | heh, no, that's the el files |
19:59.42 | JustinP | the emacs package is 15MB |
19:59.49 | hrw | yep. wgetting now |
20:00.38 | pgas | hrw: see the size of what I uploaded this morning fillets-ng-data_0.7.3_armv5tel.ipk http://mail.pdaxrom.org/contrib/merli/ |
20:00.44 | hrw | JustinP: feed/contrib/justinp/ it will be |
20:01.01 | hrw | 95.604.441 |
20:01.04 | hrw | OMG |
20:01.20 | pgas | ehe |
20:01.38 | pgas | I don't know how long it takes to untargz this thing :) |
20:01.40 | JustinP | geez |
20:08.35 | hrw | JustinP: fetched |
20:08.44 | JustinP | hrw: fun |
20:08.47 | JustinP | hrw: thanks |
20:09.29 | hrw | lack of deps ;( |
20:10.06 | hrw | ok. |
20:10.28 | hrw | I have images, feed, cross-sdk, OE metadata, bitbake - do I need something more? |
20:10.55 | pgas | native sdk :) |
20:11.00 | hrw | pgas: is in feed |
20:12.10 | JustinP | hrw: I forgot deps in my ipk? hmmm....well, I think it should work with default install....hopefully....can update it later if I need to I guess... |
20:12.33 | hrw | JustinP: if someone will try to use them then I will send it to you |
20:13.11 | hrw | hmm.. e17 images not built yet.. |
20:13.26 | hrw | but that after release |
20:13.40 | pgas | JustinP: you build with X or without? |
20:14.15 | JustinP | hrw: sorry, not sure what you mean |
20:14.30 | JustinP | pgas: without, I didn't want thhe added headache of trying to get all of the X dev stuff on my Z... |
20:14.40 | *** join/#openzaurus XorA|gone (n=dp@81-178-112-61.dsl.pipex.com) |
20:14.46 | JustinP | pgas: was hard enough as it was |
20:14.54 | hrw | JustinP: when users will complain about your emacs packages then I will send them to you |
20:15.11 | JustinP | hrw: oh, I see, np |
20:15.46 | JustinP | hrw: e images not built yet? Oh well, they're not official images anyway... Hopefully they'll be built soon. |
20:16.13 | hrw | JustinP: I have most of them in feed so it will be easy to build them from feeds probably |
20:16.36 | JustinP | hrw: ah, I see,...build world but not the images? |
20:16.43 | JustinP | hrw: yeah, it should be a simple matter then |
20:18.09 | hrw | gpe/opie/bootstrap built |
20:19.26 | JustinP | hmmmm...well...if there's an e building issue let me know...last I heard the one person who gave me a pastebin of the log was hitting a bitbake bug |
20:19.35 | JustinP | off to lunch |
20:20.21 | hrw | smacznego JustinP |
20:25.58 | leira | hrw, do u know the chinese version c750, model SL-7500C? the one i am just using. it seems the only difference to c750 is the keymap, and i want to write one for SL-7500C |
20:26.55 | hrw | ok |
20:27.03 | hrw | does OZ updater.sh works on it? |
20:27.13 | leira | if i want to put 7500's keymap into oe repo, maybe i should define a new MACHINE value~ |
20:27.33 | hrw | does it has other keyboard layout? |
20:28.05 | hrw | maybe it can be united with other c7x0 at kernel level |
20:29.21 | leira | updater.sh not works, but just a little modifiction. its $MODEL is SL-7500, i just added into the "case"s |
20:29.59 | hrw | leira: why it is not in OE yet? |
20:30.05 | leira | they has the same layout, but with different key definitions |
20:30.17 | leira | hrw? |
20:30.24 | leira | ? |
20:30.35 | hrw | leira: OE updater.sh need update for sl-7500 |
20:31.14 | leira | yes, and maybe some more places need update |
20:31.15 | hrw | SL-7500C is exact name? |
20:31.21 | leira | yes |
20:31.34 | hrw | ok. then I'll add it and update updater.sh in OZ 3.5.4 |
20:32.45 | hrw | + SL-7500C) ;; |
20:32.50 | hrw | thats all? |
20:32.59 | leira | --- packages/zaurus-updater/c7x0/updater.sh ffea2ad771956cbf5bd8a539db3916c1df122057 |
20:32.59 | leira | +++ packages/zaurus-updater/c7x0/updater.sh ac27fe449d91ba75469af8769d8e9932d56a280e |
20:32.59 | leira | @@ -55,6 +55,7 @@ |
20:32.59 | leira | <PROTECTED> |
20:32.59 | leira | <PROTECTED> |
20:33.00 | leira | <PROTECTED> |
20:33.02 | leira | + SL-7500) ;; |
20:33.04 | leira | <PROTECTED> |
20:33.06 | leira | <PROTECTED> |
20:33.10 | hrw | ah.. no C |
20:33.10 | leira | <PROTECTED> |
20:33.20 | leira | yes |
20:35.47 | leira | but if i add a new MACHINE value, it seems a lot of places should be modified~ eg. package zaurus-updater, it just contain a SRC_URI = "file://updater.sh line, it seems to find the right updater.sh by MACHINE value |
20:36.24 | hrw | its modified c750 so it should be united with other c7x0 |
20:36.40 | hrw | contact RP to integrate it at kernel level |
20:38.53 | leira | here is a pic of SL-7500C's keyboard: http://www.pconline.com.cn/digital/pda/pingce/pocketpc/0401/pic/040118_sharpz1_small010.jpg |
20:39.22 | leira | it is different to c750's |
20:39.25 | hrw | thx - will look |
20:39.32 | *** join/#openzaurus pleemans (n=peter@d54C24BC0.access.telenet.be) |
20:39.49 | JustinP | hrw: smacznego? |
20:40.02 | hrw | ~bon appetit |
20:40.03 | ibot | somebody said bon appetit was smacznego. Guten Appetit. Eet Smakelijk. God Appetitt. Buon Appetito. Buen apetito Bom Apetite. buen apetito |
20:40.31 | hrw | leira: from hardware view it is same |
20:40.43 | pgas | kali orexi |
20:40.59 | leira | yes~ it seems, but different key definitions |
20:41.25 | leira | and i do can use c750's keymap on it~ |
20:41.27 | hrw | if we ignore marks on keys then it is same? |
20:41.48 | leira | yes, almost~ ... or exactly |
20:41.52 | hrw | ok |
20:42.09 | hrw | btw - which 'dog name' it had? shepherd like c750 or other? |
20:42.10 | leira | but we need 2 diff keymap files |
20:42.21 | hrw | now I understand why |
20:42.47 | hrw | we can ship /etc/keymap-2.6.map-c7500 which user will have to rename after install |
20:42.52 | leira | i think shepherd is OK~ i cannot find one for it~ |
20:43.11 | hrw | leira: boot 2.4 and cat /proc/cpuinfo |
20:43.20 | leira | well, it is a quick and derty way~ |
20:43.46 | neil_m | fo shoa |
20:45.24 | leira | there is problem with my zaurus's USB connection to PC after flashed oz/GPE 3.5.4, so i type the main pieces here: |
20:45.44 | hrw | leira: only name is needed |
20:45.51 | leira | Processer: XScale-PXA255 rev 6(v5l) |
20:46.05 | hrw | leira: Machine name |
20:46.08 | leira | Hardware: SHARP SHepherd |
20:46.16 | hrw | btw - c-7500 support pushed into .dev |
20:46.22 | hrw | thx. so it is shepherd |
20:48.08 | hrw | also into .oz354fam083 |
20:49.27 | leira | i have question: there os only a SRC_URI = "file://updater.sh line there, how can bb find the right file? i cannot find the codes do it~ |
20:49.52 | hrw | MACHINE, DISTRO and few other things override paths |
20:50.09 | leira | where is the code do it ? |
20:50.16 | leira | in class/ ? |
20:50.23 | leira | or in bb itself? |
20:50.26 | hrw | file://updater.sh could be updater.sh files/updater.sh MACHINE/updater.sh files/MACHINE/updater.sh etc |
20:50.37 | hrw | its in bitbake and/or bbclasses |
20:51.58 | leira | or could be files/PR/updater.sh? |
20:52.16 | leira | or could be files/PR-PV/updater.sh? |
20:52.21 | hrw | no |
20:52.30 | hrw | it can be PN-PR/updater.sh |
20:52.34 | hrw | PN/updater.sh |
20:52.55 | hrw | PN-PR/MACHINE/updater.sh or PN-PR/DISTRO/updater.sh |
20:53.07 | leira | sorry~ wrong spell~ |
20:54.20 | leira | well, i understabd now, but i still cannot find the code in bbclasses |
20:55.01 | hrw | magic word is 'override' |
20:55.50 | leira | !! |
20:55.51 | cdbot | leira: ?? |
20:56.10 | leira | found them~ thx |
20:56.24 | leira | cdbot ?? |
20:56.24 | cdbot | leira: ?? |
20:57.13 | *** join/#openzaurus mrz80 (i=1000@caledonia.cns.ufl.edu) |
20:59.53 | leira | hrw: there is no Ctrl and Alt in 7500's keyboard~ what's your solution? |
21:00.34 | hrw | on c7x0 we use japanese keys |
21:00.56 | hrw | [Fn] [Ctrl] [Alt] [-] [Space] |
21:01.19 | leira | i know it, these jap keys is no use in ENG, so, use theme is OK |
21:01.28 | leira | but it not the case on 7500 |
21:01.52 | hrw | kados: http://www.oesf.org/forums/index.php?showtopic=17573&st=40&p=119055&#entry119055 |
21:02.14 | hrw | leira: then find other not-needed-for-you keys and use them |
21:02.53 | leira | i was thinking about it these days~ |
21:04.02 | leira | may be [Fn] [Ctrl] [Alt] [-] [Space] is a good idea, and we should put ":;'\"" to other [Fn]+ keys |
21:04.47 | leira | i mean: [Fn] [Ctrl] [Alt] [?/] |
21:05.20 | hrw | ; = [Fn] [G], : = [Fn][H] |
21:05.51 | leira | and '"? |
21:06.36 | leira | ' = [Fn] [Y], ? = [Fn][H] |
21:06.45 | leira | ' = [Fn] [Y], " = [Fn][U] |
21:07.36 | hrw | moment.. will run Z |
21:08.31 | hrw | \ = [Fn][F] |
21:08.57 | hrw | ? = [Shift] [?] |
21:09.22 | hrw | c760 has [fn][ctrl][alt][-][space][,][.] |
21:09.24 | hrw | ? = [Shift] [.] |
21:09.46 | hrw | " = [Shift][2] |
21:10.30 | leira | ? = [Shift] [/], \ = [Fn] [L] on 7500 |
21:12.19 | leira | ? |
21:13.09 | hrw | ?? |
21:13.43 | leira | where would u put "'\""? |
21:13.52 | leira | where would u put ['] and ]? |
21:13.56 | leira | where would u put ['] and ["]? |
21:14.45 | hrw | " I have on shift+2 |
21:14.53 | hrw | and ' - hmm.. |
21:15.10 | leira | shift+2 = @ here |
21:15.13 | hrw | Fn+d looks like nice place (looks like dot on c760 keyboard) |
21:15.30 | hrw | @ = [Fn][-] here |
21:15.53 | leira | Fn+d is too far to type~ |
21:17.15 | leira | i think ' = [Fn] [Y], " = [Fn][U] is a good idea |
21:21.07 | hrw | cu |
21:21.30 | leira | cu |
21:21.52 | JustinP | later hrw|gone |
21:56.07 | *** join/#openzaurus simcop2387 (n=simcop23@p3m/member/simcop2387) |
22:28.02 | CoreDump|home | hi |
22:33.08 | JustinP | yo CoreDump|home |
23:07.14 | *** part/#openzaurus Bompo (n=Bompo@V2857.v.pppool.de) |
23:27.57 | *** join/#openzaurus incinerator (n=incinera@82-41-24-164.cable.ubr04.edin.blueyonder.co.uk) |
23:42.27 | *** join/#openzaurus s0ciopath (n=user@net34-155.netkaster.ca) |