00:36.27 | *** join/#openzaurus Blue89 (n=IceChat7@c-24-3-7-118.hsd1.pa.comcast.net) |
00:47.25 | *** join/#openzaurus nil (i=ae7f8566@pepin.poivron.org) |
01:19.03 | Blue89 | I am still trying to get my wifi working, I am going to replug the hub, bbs |
01:20.28 | *** join/#openzaurus punkass (n=user@unaffiliated/punkass) |
01:44.13 | *** join/#openzaurus synth (n=fhqwhgad@c-71-203-19-17.hsd1.fl.comcast.net) |
01:46.21 | *** join/#openzaurus osborne (n=osborne@dialup-4.233.197.5.Dial1.Manchester1.Level3.net) |
01:48.52 | *** join/#openzaurus Blue89 (n=IceChat7@c-24-3-7-118.hsd1.mn.comcast.net) |
01:49.28 | Blue89 | I checked my dmesg, I get "no ipv6 routers present" |
01:49.40 | Blue89 | doesthat mean anything significant? |
01:50.23 | Blue89 | (I know that mine is one of 2 wifi networks in effective range) |
01:50.44 | NAbyss_ | Blue89: Unless you're using ipv6, it's no big dela |
01:50.51 | NAbyss_ | *deal |
01:51.53 | Blue89 | I don't know what you're talking about, so I'm guessing that means no |
01:52.13 | Blue89 | it's an older router, that sounds too new for it |
01:52.45 | NAbyss_ | Yeah, you're probably just using IPv4 |
01:53.02 | Blue89 | what puzzles me is that the wifi worked in sharp rom, but has become increasingly unreliable here |
01:53.23 | Blue89 | I head that there is a bad update going around, maybe that is to blam? |
01:53.37 | Blue89 | blame* |
01:53.58 | NAbyss_ | Hmm, not sure.. I've never really had a working wireless setup, it just intermittently connected.. ad-hoc mode is evil |
01:54.31 | Blue89 | I thought that was something else, because my wifi card's LED does not show a connection (which was mentioned as a symptom on the net) |
02:00.54 | *** join/#openzaurus mithro (n=tim@lester.mithis.com) |
02:06.34 | Blue89 | one more disconnect, bbs |
02:30.49 | *** join/#openzaurus Timelord (n=TL@16.8c.d12c.cidr.airmail.net) |
02:34.21 | *** join/#openzaurus kerwood|afk (n=Marshall@c-69-255-98-58.hsd1.md.comcast.net) |
02:39.38 | *** join/#openzaurus TasDevil (n=tasdevil@p50915973.dip.t-dialin.net) |
02:54.34 | *** join/#openzaurus mithro (n=tim@lester.mithis.com) |
04:05.40 | *** join/#openzaurus Blue89 (n=IceChat7@c-24-3-7-118.hsd1.pa.comcast.net) |
04:38.51 | *** join/#openzaurus mithro (n=tim@lester.mithis.com) |
04:43.03 | *** join/#openzaurus hvontres|home (n=hvontres@adsl-75-32-86-77.dsl.sndg02.sbcglobal.net) |
04:47.31 | *** join/#openzaurus kb7sqi (n=kb7sqi@cpe-075-177-056-201.triad.res.rr.com) |
05:04.38 | *** join/#openzaurus JustinP (n=papercra@c-69-181-11-251.hsd1.ca.comcast.net) |
06:19.02 | *** join/#openzaurus _law_ (n=law@mail.stiftadmont.at) |
06:29.33 | *** join/#openzaurus mikesh (n=mikesh@feldconf.feld.cvut.cz) |
06:45.54 | *** join/#openzaurus hvontres1home (n=hvontres@adsl-75-13-99-0.dsl.sndg02.sbcglobal.net) |
07:09.22 | *** join/#openzaurus mikesh (n=mikesh@feldconf.feld.cvut.cz) |
08:41.39 | *** join/#openzaurus mikesh (n=mikesh@feldconf.feld.cvut.cz) |
09:04.55 | *** join/#openzaurus obergix[work] (n=olivier@mag77-1-82-238-13-91.fbx.proxad.net) |
09:22.50 | *** join/#openzaurus kolla (n=kolla@firda.uninett.no) |
10:21.53 | *** join/#openzaurus polyonymous_ (n=hacker@pD953994E.dip0.t-ipconnect.de) |
10:26.51 | *** join/#openzaurus kolla_ (n=kolla@drift2.uninett.no) |
11:08.17 | *** join/#openzaurus YoG (n=chatzill@bzq-88-152-28-65.red.bezeqint.net) |
11:36.28 | *** join/#openzaurus obergix[work] (n=olivier@mag77-1-82-238-13-91.fbx.proxad.net) |
11:59.49 | *** join/#openzaurus Varoudis_ (n=varoudis@87.203.167.150) |
12:05.53 | *** join/#openzaurus Laibsch (n=Laibsch@195-23-176-195.net.novis.pt) |
12:07.14 | *** join/#openzaurus quatrix (n=quatrix@CBL217-132-227-14.bb.netvision.net.il) |
12:08.21 | quatrix | ey |
12:53.29 | *** join/#openzaurus Sonic|Laptop (n=Garrett@cblmdm72-240-97-94.buckeyecom.net) |
13:50.04 | *** join/#openzaurus mikesh (n=mikesh@x133.net.upc.cz) |
14:50.36 | *** join/#openzaurus apic (i=andi@v31521.1blu.de) |
15:03.21 | YoG | hi hrw, I was following the gpe and opie howto on openzaurus... and I think something is missing in the howto, I just wanted to verify it before changing the wiki |
15:03.32 | hrw | go ahead |
15:04.32 | YoG | hrw, it seems that no Xserver is installed, i had to do ipkg install XFbdev before it worked... did I do something wrong or something is missing on the wiki? |
15:04.48 | YoG | hrw, well... only Xepyr was installed |
15:05.08 | hrw | moment.. |
15:10.23 | *** join/#openzaurus hvontres|poodle (n=hvontres@63.92.216.147) |
15:19.06 | *** join/#openzaurus quatrix (n=quatrix@CBL217-132-227-14.bb.netvision.net.il) |
15:19.14 | quatrix | heya |
15:20.23 | *** part/#openzaurus quatrix (n=quatrix@CBL217-132-227-14.bb.netvision.net.il) |
15:22.45 | YoG | hi quatrix |
15:28.30 | *** join/#openzaurus summatusmentis (n=summatus@72.168.202.219) |
15:50.00 | *** join/#openzaurus punkass (n=user@unaffiliated/punkass) |
18:09.01 | *** join/#openzaurus pleemans (n=peter@d51A5E76A.access.telenet.be) |
19:09.40 | *** join/#openzaurus pleemans (n=peter@d51A5E76A.access.telenet.be) |
19:12.23 | *** join/#openzaurus flowolf (n=flowolf@host135-157.pool8253.interbusiness.it) |
19:12.25 | flowolf | hi all |
19:13.02 | flowolf | I ordered an SL-5500 and I'm now looking for a cheap, compatible wifi cf, can you help? |
19:15.24 | flowolf | and another question: "kernel 2.6.20 for all models except collie (which will have 2.4.18-crapix with hacked SD/MMC driver to be able to use >1GB cards)", so if I don't need an SD/MMC with >1GB I can use a 2.6 kernel without problems? |
19:26.14 | *** join/#openzaurus kb7sqi (n=kb7sqi@cpe-075-177-056-201.triad.res.rr.com) |
19:32.12 | *** join/#openzaurus law|ibook (n=_law_@213.173.86.202) |
19:43.03 | *** join/#openzaurus law|ibook (n=_law_@213.173.86.202) |
19:53.32 | *** join/#openzaurus marcan (n=marcanso@160.10.7.121) |
20:15.50 | summatusmentis | flowolf: you won't be able to use any SD card with the 2.6 kernel |
20:16.19 | summatusmentis | and as for a compatable wifi card, I'd look on ebay |
20:16.24 | hvontres|poodle | flowolf: and unfortunately, without an SD card a collie is not very usefull... |
20:16.27 | summatusmentis | just make sure it uses a prism chipset |
20:18.20 | flowolf | summatusmentis: ok, thank you |
20:18.48 | flowolf | is anyone working on a 2.6 sd driver? |
20:18.54 | summatusmentis | sure thing flowolf, what are you hoping to do with the 5500 |
20:19.29 | summatusmentis | flowolf: no, not that I know of, they people who have the knowhow don't have time, and people with time(myself, and I'm sure others) dontt know how |
20:19.47 | flowolf | taking notes / surf the net while I'm at University |
20:20.10 | summatusmentis | you're going to run into batter life issues, if you have the wireless card in the whole time |
20:20.17 | summatusmentis | I used to get about 30 mins. w/ wifi |
20:20.25 | summatusmentis | just fyi |
20:20.41 | flowolf | °_° |
20:20.46 | flowolf | this looks bad |
20:21.07 | summatusmentis | looks bad? what do you mean? |
20:21.21 | flowolf | maybe I should search for a wifi card which uses less power |
20:21.49 | flowolf | I mean that 30 mins are not enought |
20:22.35 | summatusmentis | yeah, I'm not sure you're going to find an extremely low power card |
20:22.45 | summatusmentis | best bet is find a battery extender |
20:23.13 | summatusmentis | there are lots of threads on www.oesf.org/forums on extending the battery, but that sit is down now :-/ |
20:23.16 | flowolf | what is battery life without wifi card? |
20:24.00 | summatusmentis | ~3 hours |
20:24.06 | summatusmentis | on mine |
20:24.59 | flowolf | 3 hours to 30 minutes |
20:25.07 | flowolf | o_O |
20:25.57 | summatusmentis | flowolf: yeah... it's sort of bothersome, but battery extenders help, from what I understand |
20:57.50 | *** join/#openzaurus Mardy_ (n=mardy@a88-112-62-8.elisa-laajakaista.fi) |
20:58.19 | *** join/#openzaurus NiZoX (n=nizox@lya72-1-88-161-58-43.fbx.proxad.net) |
21:29.52 | *** join/#openzaurus mimecar (n=mimecar@148.Red-83-41-202.dynamicIP.rima-tde.net) |
21:29.54 | mimecar | hi |
21:31.55 | YoG | hi mimecar |
21:32.44 | mimecar | hi YoG |
21:33.26 | YoG | mimecar, you run gpe, right? |
21:33.39 | mimecar | more or less |
21:33.50 | mimecar | I can run it without problems on internal flash |
21:34.08 | mimecar | YoG: yes :) |
21:34.09 | YoG | with which wm you use? |
21:34.15 | mimecar | matchbox |
21:34.57 | YoG | I'm trying the other wm on the feed... it seems that non of them is working out of the box (or not working at all ;-)) |
21:35.52 | mimecar | I haven't try another wm, |
21:36.06 | mimecar | first I must "get" a stable system on sd |
21:36.07 | hrw | fluxbox-gpe should works |
21:36.46 | mimecar | hrw: on small resolution also ? |
21:36.53 | YoG | hrw, that's right... fluxbox-gpe does run... |
21:37.11 | hrw | mimecar: tried on vga only |
21:37.30 | YoG | mimecar, I'm with boxer so it's vga here too |
21:38.29 | mimecar | hrw: ok |
21:38.41 | mimecar | I can run abiword, but buttons are bigger than screen xD |
21:39.56 | YoG | which package provides xfontsel? |
22:00.34 | *** join/#openzaurus kolla (i=kolla@firda.kolla.no) |
22:01.00 | mimecar | hi kolla |
22:01.25 | kolla | hello |
22:27.37 | *** join/#openzaurus darkschneider (n=gab@81-208-36-80.ip.fastwebnet.it) |
22:27.57 | mimecar | hi darkschneider |
22:28.22 | darkschneider | hello |
22:29.54 | mimecar | xDDD |
22:30.03 | summatusmentis | lol |
22:30.04 | darkschneider | lol |
22:30.06 | mimecar | I want speak at night |
22:32.34 | summatusmentis | hvontres|poodle: hmm... wal mart maybe? |
22:33.09 | hvontres|poodle | summatusmentis: yeah, but I don't want to go to work there just to get the stupid vest :) |
22:33.25 | summatusmentis | ebay then :-D |
22:33.31 | summatusmentis | or they might sell you one if you asked |
22:34.02 | mimecar | xD |
22:35.07 | *** join/#openzaurus flowolf (n=flowolf@82.53.157.135) |
22:36.35 | summatusmentis | hvontres|poodle: http://cgi.ebay.com/Wal-Mart-vest-WalMart-smock-size-XL-with-pin_W0QQitemZ290089100198QQihZ019QQcategoryZ15691QQssPageNameZWDVWQQrdZ1QQcmdZViewItem |
22:36.52 | mimecar | night all |
22:36.58 | summatusmentis | good night mimecar |
22:37.05 | summatusmentis | late, lame |
22:41.36 | flowolf | summatusmentis: does the sl-5500 support sd-io ? |
22:41.59 | hvontres|poodle | flowolf: nope.... |
22:42.14 | flowolf | cool |
22:42.18 | flowolf | so I have to find a CF :p |
22:42.35 | flowolf | a compatible cf... |
22:43.41 | hvontres|poodle | flowolf: I have had good luck with a spectrum la-4137 on my 5600 |
22:43.43 | JustinP | linux support for SDIO is very minimal right now |
22:43.49 | JustinP | and the collie's SD chip is closed |
22:44.47 | hvontres|poodle | flowolf: like this one: http://cgi.ebay.com/Symbol-Spectrum-24-High-Rate-Wireless-CF-Card_W0QQitemZ180089325616QQihZ008QQcategoryZ45003QQssPageNameZWDVWQQrdZ1QQcmdZViewItem |
22:45.59 | flowolf | USA... I have to find something in Europe... |
22:47.47 | hvontres|poodle | flowolf: hmmm... that might be hard, especialy with this ROHS bs going around now... most of the older CF cards aren't compliant and the newer ones may or may not have drivers..:( |
22:49.57 | flowolf | mmm |
22:50.19 | flowolf | where can I find a compatibility list? |
22:52.12 | CoreDump|home | hi |
22:52.15 | *** join/#openzaurus Greg2 (n=greg_@static-71-168-36-77.hag.east.verizon.net) |
22:52.22 | Greg2 | hello all |
22:53.34 | CoreDump|home | hi Greg2 |
22:54.48 | Greg2 | CoreDump|home: hi, where have you been? |
22:55.20 | CoreDump|home | busy with life. Oh and my work-shift changed so I'm usually pretty "late" on |
22:55.31 | summatusmentis | the spectrum however doesn't show up as wlan0, and uses the orinoco drivers |
22:57.04 | Greg2 | CoreDump|home: I used to work a shift-change job... I can understand :) |
22:58.28 | hvontres|poodle | summatusmentis: sure...but It works OK for just connecting to a wlan :) |
22:59.03 | hvontres|poodle | summatusmentis: and it only cost me ~$20 |
22:59.30 | Greg2 | hvontres|poodle: hi, where's that script :) |
23:00.04 | hvontres|poodle | Greg2: still need to find some time to clean it up and test it against altboot 1.1_wip :) |
23:00.19 | Greg2 | ok :) |
23:01.19 | hvontres|poodle | Greg2: I think I will try to build an OZ 3.5.5 test image this weekend if I can find some time. hrw just pushed a rough .conf file today. I'll take a look at cleaning it up and at least building a bootstrap image for testing. |
23:02.27 | Greg2 | in the .dev branch? |
23:02.33 | flowolf | I found a Samsung SWL-2610C which should use a TNETW1130 chipset which should be supported by http://acx100.sourceforge.net/ on Linux, is it a good choice for the SL-5500? |
23:02.44 | summatusmentis | hvontres|poodle: yeah, I'd like something that'll do more, I want a prism card |
23:04.29 | hvontres|poodle | Greg2: yes. hrw and xora decided to build 3.5.5 against .dev since .oz354 is becoming too bitrotted for the two of them to bring back up to speed. I think at some point they might create another oz branch, but I am not sure. |
23:05.28 | Greg2 | so would you recommend I set up .dev? |
23:08.46 | Greg2 | hvontres|poodle: has anybody built a working opie image in .dev for a Z? |
23:09.24 | flowolf | so, I'm going to buy it |
23:09.31 | flowolf | it has a good price for Europe |
23:09.56 | flowolf | less than 20€ |
23:10.26 | hvontres|poodle | flowolf: I don't think OZ has those drivers yet, but if you want to work on porting them over we would be very appreciative :) |
23:10.38 | flowolf | argh |
23:10.42 | CoreDump|home | hehe |
23:10.49 | flowolf | can't I just download and compile them? |
23:11.47 | hvontres|poodle | Greg2: I managed to build an opie image with angstrom, but I was using 2.6.20 which has some problems with resuming. I will probably try and build another image with 2.6.17 this weekend. |
23:11.50 | CoreDump|home | flowolf: in short: nope |
23:12.22 | CoreDump|home | flowolf: you need a propper cross-compile environment for that |
23:12.22 | flowolf | which drivers were ported? |
23:12.39 | flowolf | a crosscompiler isn't a problem |
23:12.52 | flowolf | I can have that in minutes |
23:13.11 | flowolf | just emerge crossdev and some other commands |
23:13.37 | flowolf | but I'm not able to change the code |
23:14.02 | flowolf | so if the port process involves changing code I'm not able to do that... |
23:14.12 | CoreDump|home | forget the emerge thingy. To compile stuff for OZ, you are kinda required to install openembedded |
23:14.55 | flowolf | could you link an howto? |
23:15.12 | CoreDump|home | flowolf: http://www.openembedded.org/wiki/GettingStarted |
23:15.20 | flowolf | thank you |
23:15.25 | CoreDump|home | np |
23:15.40 | CoreDump|home | support for OE is available in #oe |
23:15.46 | flowolf | looks easy |
23:21.55 | hvontres|poodle | flowolf: good luck. :) |
23:28.05 | Greg2 | CoreDump|home: would you happen to have offroadgeek's email address... So I can help him fix his site? |
23:28.23 | CoreDump|home | Greg2: hold on |
23:28.29 | CoreDump|home | err |
23:28.38 | CoreDump|home | nah, lost it sorry |
23:28.46 | CoreDump|home | what's wrong w/ oesf.org? |
23:29.25 | JustinP | it's probably cosmically tied in with my machine |
23:30.12 | Greg2 | CoreDump|home: just try to go there :( |
23:30.38 | CoreDump|home | ouch |
23:30.47 | CoreDump|home | doesn't sound like you could do much |
23:31.21 | Greg2 | they put up a temp message and have never taken it down |
23:31.30 | Greg2 | You just have to add down to index.php > http://www.oesf.org/forums/index.php.down |
23:31.36 | Greg2 | and add down to every link you want to read. |
23:31.59 | CoreDump|home | hmmm |
23:32.01 | *** join/#openzaurus SaidBerlin (n=SaidBerl@89.129.57.212) |
23:32.09 | Greg2 | I would like to tell him |
23:32.50 | Greg2 | the server is fixed |
23:33.03 | CoreDump|home | yeah. I don't have the address anymore :\ |
23:33.13 | Greg2 | ok :9 |
23:33.27 | Greg2 | ok :( even |
23:50.36 | hvontres|poodle | Time for weekend :) |
23:50.47 | hvontres|poodle | I'll catch you all later. |
23:55.43 | *** join/#openzaurus daurn (n=fake@unaffiliated/daurnimator) |