01:59.16 | *** join/#openzaurus Sonic|Laptop (n=Garrett@cblmdm72-240-97-94.buckeyecom.net) |
02:02.00 | *** join/#openzaurus jts (n=jts@72.168.202.219) |
02:03.49 | *** join/#openzaurus jts (n=jts@72.168.202.219) |
02:08.36 | *** join/#openzaurus Thaiger (n=HP_Admin@nv-76-0-227-220.dhcp.embarqhsd.net) |
02:08.51 | Thaiger | Has anyone got debian (pocketworkstation.org) to work? |
02:15.53 | *** join/#openzaurus mithro (n=tim@lester.mithis.com) |
02:19.23 | *** join/#openzaurus jts` (n=jts@72.168.202.219) |
02:44.33 | *** join/#openzaurus TasDevil (n=tasdevil@p5091584E.dip.t-dialin.net) |
03:41.37 | *** join/#openzaurus nil (i=0e492447@pepin.poivron.org) [NETSPLIT VICTIM] |
03:41.38 | *** join/#openzaurus JustinP (n=papercra@c-69-181-11-251.hsd1.ca.comcast.net) |
04:04.53 | *** join/#openzaurus mithro (n=tim@lester.mithis.com) |
04:18.54 | *** join/#openzaurus agaffney (n=agaffney@gentoo/developer/pdpc.active.agaffney) |
04:58.26 | *** join/#openzaurus Mudhoney (n=Bryan@dhcp-183-25-149-24.cf-res.cfu.net) |
05:02.26 | *** join/#openzaurus mithro (n=tim@lester.mithis.com) |
05:33.25 | *** join/#openzaurus RP (i=1000@tim.rpsys.net) |
05:52.43 | *** join/#openzaurus _law_ (n=law@mail.stiftadmont.at) |
07:10.59 | *** join/#openzaurus Ironnads (n=Ironnads@host86-135-87-54.range86-135.btcentralplus.com) |
07:40.46 | *** join/#openzaurus nm (n=hongtd@58.187.131.148) |
07:41.03 | nm | hi * |
07:41.29 | nm | can zaurus work w/ sdio-wifi card ? |
07:43.22 | AzzIzzA | um maybe in fairly limited circumstances, last i heard some models had sdio hardware and people were trying to figure out a driver (and having a hard time of it) |
07:43.22 | *** join/#openzaurus pht_ (n=pht@feynman.spatium.org) |
07:43.42 | AzzIzzA | you might get lucky but i have a feeling it wont be easy |
07:43.47 | AzzIzzA | if it works at all |
07:47.32 | nm | AzzIzzA: okie |
07:47.35 | nm | AzzIzzA: AzzIzzA: hmm, what about CF card, all wifi-card work well w/ zaurus? |
07:49.04 | nm | AzzIzzA: i can't find any where to bought this CF card, so i want to make sure which cf card model works w/ my zaurus 3200 |
07:53.53 | AzzIzzA | cf is well supported, as to any particular card it depends on what chipset it uses |
07:54.11 | AzzIzzA | older chipsets like orinoco and prism should work well |
07:54.18 | AzzIzzA | i dont know about some of the newer ones |
07:54.45 | AzzIzzA | im having a horrible time with my symbol card, although im starting to wonder if the card itself is faulty :/ |
07:58.33 | *** join/#openzaurus darkschneider (n=gab@81-208-36-80.ip.fastwebnet.it) |
07:59.02 | nm | AzzIzzA: hmm what is your "symbol card" ? |
08:02.40 | AzzIzzA | la-4137 |
08:02.46 | AzzIzzA | other people report making it work |
08:03.03 | AzzIzzA | so whether mine is a slightly different version, or just broken, i dont know |
08:07.30 | nm | AzzIzzA: do you use cf-wired lan card ? |
08:09.29 | nm | all cf interface card have very high price :-( |
08:29.24 | *** join/#openzaurus kolla (n=kolla@drift1.uninett.no) |
08:40.14 | *** join/#openzaurus mithro (n=tim@ppp246-117.static.internode.on.net) |
08:48.25 | nm | can zaurus work well w/ cf 802.1g card ? |
09:10.16 | *** join/#openzaurus mikesh (n=mikesh@x133.net.upc.cz) |
09:14.05 | *** join/#openzaurus darmou (n=darmou@ppp143-161.lns3.mel6.internode.on.net) |
09:22.26 | darmou | hi all |
09:22.43 | XorA | yo darkschneider |
09:22.46 | XorA | yo darmou |
09:22.51 | XorA | bloody auto complete |
09:23.41 | darmou | hey XorA do you know what's happening with the next openzaurus ver? |
09:24.33 | darmou | I'm beginning to wonder if I shouldn't just build an unnofficial one with my hacks and mono etc included :) |
09:24.51 | darmou | I'm currently building the latest version of dillo with oe |
09:25.15 | darmou | I'ts the fastest broweser around, shame it does not handle css very well |
09:27.25 | XorA | darmou: we are stalled due to lack of time and developers, so if you would start doing unofficial builds and finding bugs that would be great |
09:34.22 | darmou | what's the meta-build target for openzaurus gpe-image is it bitbake gpe? |
09:35.03 | XorA | gpe-image4 |
09:35.06 | XorA | -4 |
09:35.19 | XorA | just bitbake gpe-image |
09:35.34 | darmou | great thanks XorA |
10:41.52 | hrw|conference | zdroj |
11:24.34 | *** join/#openzaurus tomimo (n=kurre@a80-186-77-174.elisa-laajakaista.fi) |
11:29.01 | *** join/#openzaurus Laibsch (n=Laibsch@F73f7.f.ppp-pool.de) |
11:39.43 | *** join/#openzaurus mithro (n=tim@ppp246-117.static.internode.on.net) |
11:53.57 | *** join/#openzaurus obergix[work] (n=olivier@inf-berger.int-evry.fr) |
12:06.08 | *** join/#openzaurus mikesh (n=mikesh@x133.net.upc.cz) |
12:21.03 | *** join/#openzaurus agaffney_ (n=agaffney@gentoo/developer/pdpc.active.agaffney) |
12:31.31 | *** join/#openzaurus mikesh (n=mikesh@x133.net.upc.cz) |
12:34.32 | *** join/#openzaurus Laibsch (n=Laibsch@F73f7.f.ppp-pool.de) [NETSPLIT VICTIM] |
12:35.09 | *** join/#openzaurus obergix[work] (n=olivier@inf-berger.int-evry.fr) |
13:16.23 | *** join/#openzaurus mikesh (n=mikesh@x133.net.upc.cz) |
13:23.22 | *** join/#openzaurus obergix[work] (n=olivier@157.159.16.71) |
15:35.37 | *** join/#openzaurus obergix[work] (n=olivier@inf-berger.int-evry.fr) |
15:54.37 | *** join/#openzaurus hvontres|poodle (n=hvontres@redhill.orthodyne.com) |
16:01.48 | *** join/#openzaurus hvontres|poodle (n=hvontres@redhill.orthodyne.com) |
16:15.04 | *** join/#openzaurus Goggy (i=gog@69-9-9-226.dakotacom.net) |
16:40.08 | *** join/#openzaurus Blue89 (n=IceChat7@c-24-3-7-118.hsd1.mn.comcast.net) |
16:46.57 | Blue89 | I tried running entranced on my Z and now I am not getting any reation to screen rotation |
16:51.14 | *** join/#openzaurus [cc]smart (n=[cc]smar@gw.ptr-62-65-142-223.customer.ch.netstream.com) |
17:06.26 | JustinP | Blue89: perhaps you didn't have zaurusd installed? It's what handles that |
17:07.35 | Blue89 | my distro came with zaurusd |
17:07.43 | Blue89 | I will try running it manually |
17:08.25 | *** join/#openzaurus Sonic|Laptop (n=Garrett@cblmdm72-240-97-94.buckeyecom.net) |
17:08.31 | JustinP | hmm....I need to try e-image again.... |
17:10.19 | Blue89 | I am actually running a gpe image that I just installed e on top of |
17:10.24 | *** join/#openzaurus Sonic|Laptop (n=Garrett@cblmdm72-240-97-94.buckeyecom.net) |
17:10.48 | Blue89 | I am getting "zaurusd: not found" like oit is not in my path. where is zaurusd located? |
17:19.35 | JustinP | Blue89: it's started automatically usually. ps aux | grep zaurusd |
17:19.42 | JustinP | /etc/init.d/zaurusd start |
17:19.42 | JustinP | etc |
17:21.49 | Blue89 | <PROTECTED> |
17:21.54 | JustinP | :-) |
17:22.01 | JustinP | it should be started automatically, though... |
17:22.07 | Blue89 | true |
17:22.25 | Blue89 | I think entranced killed my x config or something |
17:22.33 | Blue89 | I think gpe-dm died too |
17:22.35 | JustinP | ummm...there is no xconfig ;-) |
17:22.47 | JustinP | I'll build an e-image and see what it does for me |
17:22.53 | JustinP | I haven't tried GPE + e in a while |
17:23.09 | Blue89 | what device are you on? |
17:23.50 | JustinP | spitz |
17:24.07 | JustinP | C3000 |
17:24.11 | Blue89 | ah |
17:24.18 | Blue89 | 3200 here |
17:24.55 | Blue89 | have you used e on this before? |
17:25.33 | Blue89 | I have one other problem, e can't draw text in any of it's menus |
17:25.55 | Blue89 | even the little "show this spash screen next time" is missing |
17:29.39 | Blue89 | gpe-dm's x session dies repeatedly now... E looks pretty cool but it is screwing up everything :-S |
17:29.45 | Blue89 | lol |
17:50.16 | JustinP | Blue89: well, gpe-dm and entrance replace each other... |
17:50.27 | JustinP | Blue89: I am the e maintainer for OE ;-) |
17:51.23 | Blue89 | I know, I just wanted to see if gpe-dm caused less trouble and it didn't work. but I guess if I don't need it that's not important |
17:56.13 | JustinP | Blue89: you may be better off installing e-image if you want to play with it....or installing bootstrap-image and installing e on top of that |
17:56.27 | JustinP | Blue89: you can even use a loopback image, you have an HD after all ;-) |
17:57.17 | Blue89 | where is the spitz e image? I haven't seen any |
18:01.40 | JustinP | hmmm...I thought they'd made one |
18:03.13 | Blue89 | I might have just missed it |
18:03.33 | JustinP | if they didn't try bootstrap and then installing entrance and e-wm on it |
18:04.00 | JustinP | (also rxvt-unicode....actually....) |
18:04.30 | JustinP | actually, try "ipkg install meta-e-x11-core" |
18:04.56 | Blue89 | I might try that |
18:05.12 | Blue89 | especially if it will fix my missing text |
18:05.20 | *** join/#openzaurus pleemans (n=peter@d51A5E76A.access.telenet.be) |
18:05.52 | Blue89 | if I repartition so my home is on hda2, will it be kept if I reinstall again? |
18:06.03 | JustinP | sure |
18:06.14 | JustinP | remember you don't need to "flash" your hd |
18:06.22 | JustinP | you can always use loopback images for testing |
18:06.43 | Blue89 | I need to do that, I didn't the first time and I will have to back everything up |
18:06.52 | JustinP | I even have a 2.4 kernel install still kicking around on hda6 so I can replace hda1 without "flashing" |
18:07.28 | JustinP | this may help: http://pear.reversefold.com/dokuwiki/doku.php?id=zaurus:loopbackimages |
18:07.38 | Blue89 | I will read |
18:08.14 | JustinP | it's instructions for how to set up a loopback image on an SD card |
18:08.20 | JustinP | you can change it a bit to do it on yout HD |
18:08.30 | JustinP | you will also need a new menu option in altboot I think.... |
18:16.24 | *** join/#openzaurus law|ibook (n=_law_@213.173.86.202) |
18:19.48 | *** join/#openzaurus law|ibook_ (n=_law_@213.173.86.202) |
18:19.58 | *** join/#openzaurus xota (n=xota@87.Red-88-3-227.staticIP.rima-tde.net) |
18:20.57 | xota | hi! |
18:20.59 | xota | can anybody help me to install openzaurus 3.5.4 on a SD 2G |
18:21.03 | xota | i have an error |
18:21.06 | xota | losetup: ioctl: LOOP_SET_FD: Device or resource busy |
18:31.22 | Blue89 | is kdrive-ati any better than kdrive-xfbdev? |
18:31.38 | Blue89 | (faster maybe?) |
18:35.39 | *** join/#openzaurus law|ibook (n=_law_@213.173.86.202) |
18:39.54 | agaffney | xota: collie? |
18:40.00 | xota | agaffney: yes |
18:40.14 | agaffney | collie can't use a 2GB SD card without some work |
18:40.23 | agaffney | and it's very picky about which cards it works with |
18:40.37 | xota | I patch the tar.gz and the RAM system |
18:40.41 | agaffney | and you can't create the rootfs on SD from altboot, as it seems to mess it up :) |
18:40.52 | agaffney | I had to do mine with my laptop nad a card reader |
18:41.00 | agaffney | many other people have had the same problem |
18:41.16 | xota | the sandisk 2G SD card works on the ram system |
18:41.29 | xota | to install on sd I try to copy rootfs.ext2 to the SD |
18:41.41 | xota | and install it (loopback and direct install) |
18:41.48 | agaffney | you can't install from altboot |
18:41.49 | agaffney | it doesn't work |
18:41.51 | xota | all fails |
18:41.58 | agaffney | it gives you the error you pasted above |
18:42.04 | agaffney | you have to do it manually |
18:42.07 | xota | it's posible to fix it? |
18:42.11 | agaffney | with a card reader and a linux machine |
18:42.17 | agaffney | xota: sure, if you figure out why it's doing it :) |
18:42.20 | xota | ok, then no problem ;) |
18:42.27 | agaffney | nobody has really taken the time to figure out why it does it |
18:42.32 | agaffney | since it can be worked around |
18:43.57 | xota | (I can't understand you very well, I'm spanish, english bad ;p) |
18:44.04 | *** join/#openzaurus JustinP (n=papercra@c-69-181-11-251.hsd1.ca.comcast.net) |
18:44.07 | xota | how can i do it with a card reader and linux machine? |
18:44.24 | Blue89 | JustinP, I don't think that package you told me about exists |
18:44.33 | Blue89 | meta-e-x11-core |
18:44.53 | Blue89 | it's not in the feed browser |
18:51.43 | JustinP | Blue89: that's unfortunate |
18:52.47 | xota | agaffney: mount de loopfile on my PC and install de tar.bz on it? |
18:54.44 | agaffney | create a fat32 filesystem on the card, mount that, create a loopback file, format is ext2, mount that, and extract the rootfs tarball on it |
18:55.28 | xota | and then if I reboot collie and boot from SD |
18:55.30 | xota | it works? |
18:57.27 | agaffney | that's the idea :) |
19:12.21 | xota | ok, i go to try it ;) |
19:12.29 | xota | I have a problem with dd |
19:12.48 | xota | because it doesn't stop at 400M |
19:12.54 | xota | I put the count=400M |
19:14.21 | agaffney | that's not how you use count |
19:14.31 | agaffney | bs=1M count=400 |
19:16.17 | xota | dd if=/dev/zero of=opie-rootfs.bin bs=1024 count=400M |
19:16.54 | agaffney | that's not the same thing |
19:17.00 | agaffney | "400M" isn't a number |
19:17.08 | agaffney | unless it's considering it 4,000,000 |
19:17.15 | xota | okkk I understand |
19:17.23 | agaffney | you're telling it 4,000,100 1K blocks |
19:17.30 | agaffney | maybe :P |
19:20.31 | xota | I'm copying it |
19:20.59 | xota | I hope that it works ;) |
19:22.57 | xota | shit! |
19:23.00 | xota | same error |
19:25.37 | xota | agaffney: don't work! (again ;) |
19:26.15 | agaffney | same error when you boot? |
19:28.29 | xota | yes |
19:28.37 | xota | I boot one time and put the altboot password |
19:28.40 | xota | then I reboot |
19:28.51 | xota | and boot from SD again |
19:28.57 | xota | and it's the error |
19:29.03 | xota | do u like to read it completely? |
19:30.22 | xota | with the 64M CF I have same error |
19:48.13 | xota | fuck 2G SD ;) |
19:50.12 | *** join/#openzaurus level42 (n=barfussp@p54A94FE6.dip.t-dialin.net) |
19:58.24 | xota | bye! |
20:36.18 | *** join/#openzaurus synth (n=fhqwhgad@c-71-203-19-17.hsd1.fl.comcast.net) |
22:21.15 | *** join/#openzaurus kolla (n=kolla@084202069167.customer.alfanett.no) |
22:44.28 | *** join/#openzaurus jts (n=jts@72.168.202.219) |
22:56.43 | CoreDump|home | hi |
22:57.16 | jts | hey CoreDump|home |
23:22.30 | *** join/#openzaurus kolla (i=kolla@firda.kolla.no) |
23:35.51 | *** part/#openzaurus SuN (i=unices@ip5652ade4.speed.planet.nl) |