00:20.28 | *** join/#qi-hardware archang (~archang@111.198.29.54) |
00:28.32 | *** join/#qi-hardware dandon (~dandon@88.151.75.214) |
00:34.32 | *** join/#qi-hardware Haswell (~broaderba@unaffiliated/haswell) |
00:58.19 | *** join/#qi-hardware Haswell (~broaderba@unaffiliated/haswell) |
01:28.58 | *** join/#qi-hardware Nik05 (~Nik05@unaffiliated/nik05) |
01:31.47 | *** join/#qi-hardware tumdedum (~tumdedum@unaffiliated/espiral) |
02:17.12 | *** join/#qi-hardware atommann (~atommann@58.251.2.94) |
02:50.31 | DocScrutinizer05 | roh: http://chip.tomsk.ru/chip/chipdoc.nsf/vc1!readform&view=smd&cat=S&start=2001&count=500 |
02:53.55 | DocScrutinizer05 | http://chip.tomsk.ru/chip/chipdoc.nsf/vc1?readform&start=1&view=smd&cat=B&count=500 |
02:57.26 | DocScrutinizer05 | http://wstaw.org/m/2015/03/19/plasma-desktopBC1895.png sorry |
02:57.39 | DocScrutinizer05 | http://chip.tomsk.ru/chip/chipdoc.nsf/vc1!readform&view=smd&cat=B&start=3501&count=500 |
03:10.14 | *** join/#qi-hardware xiangfu (~xiangfu@111.198.29.54) |
03:25.26 | roh | DocScrutinizer05: hm. nothing matches... well.. back to the seller it goes |
03:25.58 | xiangfu | DocScrutinizer05: Hi, is the case ok for you? what should we do on the cases? |
03:32.13 | DocScrutinizer05 | xiangfu: sorry, still stuck at customs |
03:33.11 | DocScrutinizer05 | so I can't say anything more than a few weeks ago |
03:33.43 | xiangfu | DocScrutinizer05: ok. |
03:33.48 | xiangfu | is there anything I can help? |
03:34.05 | DocScrutinizer05 | well, probably not |
03:34.26 | xiangfu | ok. |
03:34.33 | xiangfu | let me know anything I can help. |
03:34.39 | DocScrutinizer05 | there been one tiny typo in invoice but that doesn't explain how customs cocks up |
03:35.33 | DocScrutinizer05 | I sent them a lengthy explanation of what's the content and where to look on ebay for faintly similar objects and their value |
03:36.04 | DocScrutinizer05 | thios been a few days ago, I hope it will finally go free now |
03:37.54 | DocScrutinizer05 | xiangfu: I'll ping you as soon as I know any news |
03:38.26 | xiangfu | Okey |
03:38.59 | DocScrutinizer05 | maybe eventually I'll have to tell customs to contact you and tell them that you dug out those cases from your garbage bin |
03:40.18 | DocScrutinizer05 | but I doubt they would even bother to contact you, after all you can tell then no more than you already did in invoice. Or anything you like |
03:41.11 | DocScrutinizer05 | when they don't trust ebay, they will probably need to have some expert check the parcel's content |
03:41.17 | DocScrutinizer05 | jerks |
03:42.17 | DocScrutinizer05 | too many parcels from china, all declared as "gift" or otherwise fraudulent |
03:42.37 | DocScrutinizer05 | german customs gets pissed since years |
03:46.48 | xiangfu | yes. |
03:48.13 | DocScrutinizer05 | next time we add more google searchterms to the content declaration |
03:49.38 | DocScrutinizer05 | are the cases re-assembled or in separate parts? |
03:50.14 | DocScrutinizer05 | IOW can customs dude see that there's missing the PCB? |
03:50.54 | DocScrutinizer05 | well, he probably could anyway when sliding open, there's abig hole where kbd should be ;-D |
03:55.12 | xiangfu | in separate parts. |
03:55.41 | xiangfu | but I put them together. for don't break when shipping. |
03:58.04 | DocScrutinizer05 | thanks! |
03:58.08 | DocScrutinizer05 | :-) |
04:00.25 | DocScrutinizer05 | http://wstaw.org/m/2015/03/19/plasma-desktopec1895.png :-D |
04:06.05 | *** join/#qi-hardware archang (~archang@111.198.29.53) |
04:34.09 | *** join/#qi-hardware fengling (~fengling@2002:6fc6:1d36:0:7433:f66a:62e7:dc45) |
06:45.44 | *** join/#qi-hardware fengling (~fengling@2002:6fc6:1d36:0:7433:f66a:62e7:dc45) |
08:33.00 | *** join/#qi-hardware sb0 (~lekernel@191.17.90.92.rev.sfr.net) |
09:09.10 | *** join/#qi-hardware pcercuei (~paul@137.71.226.54) |
09:20.22 | *** join/#qi-hardware wej (~j@2001:1af8:4010:a08c:1::6e) |
09:24.19 | *** join/#qi-hardware wolfspraul (~wolfsprau@xd9bfe947.dyn.telefonica.de) |
09:40.23 | *** join/#qi-hardware jekhor (~jek@port-80-adslby-pool36.infonet.by) |
11:35.04 | wpwrak | aah, finally ! (in german) http://www.heise.de/newsticker/meldung/Nassrasierer-bestellt-auf-Knopfdruck-neue-Klingen-2580253.html |
11:36.16 | wpwrak | taking care of all the intricate logistics of buying and stockpiling new blades has really been intolerable |
12:06.37 | eintopf | internet of things are there |
12:24.23 | wpwrak | internet of strange things |
12:32.48 | *** join/#qi-hardware jekhor_ (~jek@port-80-adslby-pool36.infonet.by) |
12:41.34 | larsc | that's just the normal internet |
14:33.51 | *** join/#qi-hardware valhalla (~valhalla@88-149-143-70.v4.ngi.it) |
14:39.19 | *** join/#qi-hardware jekhor__ (~jek@port-80-adslby-pool36.infonet.by) |
14:53.36 | *** join/#qi-hardware sb0 (~lekernel@191.17.90.92.rev.sfr.net) |
15:03.57 | *** join/#qi-hardware dandon_ (~dandon@88.151.75.214) |
15:55.43 | *** join/#qi-hardware sb0 (~lekernel@191.17.90.92.rev.sfr.net) |
16:54.37 | arossdotme | #got a 2.5 inch 12v +/- composite lcd but it's got a darn clf backlight. so it's a noise monster and needs 300ma ! when my 4.3 inch one with led backlight uses 100ma @12. i want to run it rom a little lithium batt. i see the clf is held sandwiched on top via some screw, could i replace it easily with a led one if so any quick suggestions? |
16:55.03 | arossdotme | @12v |
16:56.24 | arossdotme | this screen has a built in lift/right flip which means i can use it for taking selfys with my action camera |
16:56.45 | arossdotme | which no other screen has |
16:56.57 | arossdotme | or at lest small screen |
17:37.43 | *** join/#qi-hardware sb0 (~lekernel@154.20.90.92.rev.sfr.net) |
17:58.55 | *** join/#qi-hardware jekhor_ (~jek@port-80-adslby-pool36.infonet.by) |
18:18.06 | DocScrutinizer05 | 2.5" CFL :-o |
18:18.17 | DocScrutinizer05 | dang that thing must be old |
18:18.41 | DocScrutinizer05 | "White LEDs? You're kidding!" ;-P |
18:18.58 | *** join/#qi-hardware jekhor__ (~jek@port-80-adslby-pool36.infonet.by) |
18:19.58 | DocScrutinizer05 | generally replacing backlight by another technology or design is *very* difficult |
18:20.42 | DocScrutinizer05 | ideally check out where the CFL sits and replace the CFL by a LED strip, with no more than 5mm pitch between LEDs |
18:21.30 | DocScrutinizer05 | then you 'just' need to figure which direction the LEDs have to face to - mind you a CFL is omnidirectional by design |
18:21.42 | *** join/#qi-hardware pcercuei (~pcercuei@2a02:810d:1b40:1118::a) |
18:22.25 | DocScrutinizer05 | odds are your efficiency of new design is so poor that you need even _more_ power for the LEDs than for the CFL |
18:22.56 | DocScrutinizer05 | what do you mean by "noise monster"? |
18:23.19 | DocScrutinizer05 | EMI? or audio? |
18:23.59 | DocScrutinizer05 | if you meant audio, then there#s sth defect in the converter, which might allso account for the high power consumption |
18:25.04 | *** join/#qi-hardware wej (~j@2001:1af8:4010:a08c:1::6e) |
18:25.31 | DocScrutinizer05 | prolly the whole thing is sooooo oooold that the elcos fell dry meanwhile. Nothing unusual, and would well cause audible noise and poor efficiency |
18:27.02 | DocScrutinizer05 | also cheap crappy inductors/transformers/chokes can cause quite some audible noise and same time reduce efficiency |
18:27.35 | DocScrutinizer05 | impact on efficiency isn't _that_ much though in this case |
18:27.55 | DocScrutinizer05 | unless the thing gets saturated |
18:28.11 | DocScrutinizer05 | (= operating at too high current) |
18:28.37 | DocScrutinizer05 | then efficiency drops through the ground |
18:29.35 | DocScrutinizer05 | like: 200 of the 300mA would simply heat up the choke then |
18:31.21 | DocScrutinizer05 | decent SPSU have a controller that avoids such pathological states of operation. Simple cheap ones you can bet will suffer from exactly that on overload of output |
18:37.44 | DocScrutinizer05 | wpwrak: LOL |
18:40.14 | DocScrutinizer05 | waits until Braun offers a beard shaver that works automatically, after asking with friendly voice "do you want a shave now, Sir?" (the variant with s/Sir/Madam/ will prolly not make it to market) |
18:40.30 | *** join/#qi-hardware sb0 (~lekernel@154.20.90.92.rev.sfr.net) |
18:41.12 | DocScrutinizer05 | Ms Wurst uttered disappointment |
18:42.17 | DocScrutinizer05 | still waits for toilet paper with a e-ink watch in every sheet |
18:42.54 | arossdotme | D ocScrutinizer umm i there i heard a little bit of noise but whats bad is it has a built in speaker but the noise the audio circuit picks up is awful. it's louder then the audio output from my camera |
18:43.36 | arossdotme | i was suprised to see it uses clf |
18:43.46 | DocScrutinizer05 | pph, that clearly indicated eelctrolytic capacitors gone south, no? |
18:43.53 | DocScrutinizer05 | ooh* |
18:44.00 | arossdotme | guess thats why it has analog brightness,sat |
18:44.04 | arossdotme | nobes |
18:44.09 | arossdotme | nobs |
18:45.19 | arossdotme | http://www.aliexpress.com/item/mini-2-5-Digital-LCD-Car-Monitor-for-CCTV-CAMERA-DVR/762639228.html |
18:48.38 | arossdotme | btw know of such a thing as a composite limage flip? that mirror flips the image? |
18:49.19 | arossdotme | so i can use the average little lcd as a selfy external monitor |
18:49.52 | arossdotme | so you unput rac video and you get a rac composite output |
18:49.57 | arossdotme | unput=input |
18:50.42 | arossdotme | i guess i just have to use a bigger batt pack and lithim batt stetup conterver |
18:51.03 | arossdotme | so much for a small light what screen for my tiny action cam |
18:51.27 | arossdotme | what =weight |
18:53.17 | arossdotme | more of the smae lcd but for sale http://www.aliexpress.com/wholesale?shipCountry=uk&shipFromCountry=&shipCompanies=&SearchText=2.5&exception=&minPrice=&maxPrice=&minQuantity=&maxQuantity=&isFreeShip=n&isFavorite=n&isRtl=n&isOnSale=n&isBigSale=n&similar_style=n&similar_style_id=&isAtmOnline=n&CatId=200003807 |
19:05.52 | *** join/#qi-hardware sb0 (~lekernel@154.20.90.92.rev.sfr.net) |
19:11.02 | *** join/#qi-hardware pcercuei (~pcercuei@2a02:810d:1b40:1118::a) |
19:15.10 | *** join/#qi-hardware jekhor (~jek@91.215.176.168) |
19:31.02 | *** join/#qi-hardware dandon (~dandon@88.151.74.205) |
20:19.20 | *** join/#qi-hardware pcercuei (~pcercuei@2a02:810d:1b40:1118::6) |
20:43.17 | *** join/#qi-hardware wej (~j@2001:1af8:4010:a08c:1::6e) |
20:57.54 | *** join/#qi-hardware nicksydney (~quassel@243.241.dsl.syd.iprimus.net.au) |
21:23.59 | *** join/#qi-hardware jekhor (~jek@nat-minsk-pool-46-53-200-107.telecom.by) |
22:33.24 | *** join/#qi-hardware wej (~j@2001:1af8:4010:a08c:1::6e) |
23:07.26 | *** join/#qi-hardware wej (~j@2001:1af8:4010:a08c:1::6e) |
23:55.42 | DocScrutinizer05 | waits for xiangfu to show up |
23:56.36 | DocScrutinizer05 | dang, I removed HK from my worldclock |
23:57.24 | DocScrutinizer05 | hmm, almost 8 AM |
23:57.42 | DocScrutinizer05 | :-) |